- 21 Feb, 2024 1 commit
-
-
Florian Westphal authored
We need to set the dormant flag again if we fail to register the hooks. During memory pressure hook registration can fail and we end up with a table marked as active but no registered hooks. On table/base chain deletion, nf_tables will attempt to unregister the hook again which yields a warn splat from the nftables core. Reported-and-tested-by: syzbot+de4025c006ec68ac56fc@syzkaller.appspotmail.com Fixes: 179d9ba5 ("netfilter: nf_tables: fix table flag updates") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
- 19 Feb, 2024 3 commits
-
-
Kees Cook authored
FORTIFY_SOURCE has been ignoring 0-sized destinations while the kernel code base has been converted to flexible arrays. In order to enforce the 0-sized destinations (e.g. with __counted_by), the remaining 0-sized destinations need to be handled. Unfortunately, struct vic_provinfo resists full conversion, as it contains a flexible array of flexible arrays, which is only possible with the 0-sized fake flexible array. Use unsafe_memcpy() to avoid future false positives under CONFIG_FORTIFY_SOURCE. Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Shannon Nelson authored
Since there is a utility available for this, use the API rather than open code. Fixes: 13943d6c ("ionic: prevent pci disable of already disabled device") Reviewed-by:
Brett Creeley <brett.creeley@amd.com> Signed-off-by:
Shannon Nelson <shannon.nelson@amd.com> Signed-off-by:
-
Hangbin Liu authored
In bond priority testing, we set the primary interface to eth1 and add eth0,1,2 to bond in serial. This is OK in normal times. But when in debug kernel, the bridge port that eth0,1,2 connected would start slowly (enter blocking, forwarding state), which caused the primary interface down for a while after enslaving and active slave changed. Here is a test log from Jakub's debug test[1]. [ 400.399070][ T50] br0: port 1(s0) entered disabled state [ 400.400168][ T50] br0: port 4(s2) entered disabled state [ 400.941504][ T2791] bond0: (slave eth0): making interface the new active one [ 400.942603][ T2791] bond0: (slave eth0): Enslaving as an active interface with an up link [ 400.943633][ T2766] br0: port 1(s0) entered blocking state [ 400.944119][ T2766] br0: port 1(s0) entered forwarding state [ 401.128792][ T2792] bond0: (slave eth1): making interface the new active one [ 401.130771][ T2792] bond0: (slave eth1): Enslaving as an active interface with an up link [ 401.131643][ T69] br0: port 2(s1) entered blocking state [ 401.132067][ T69] br0: port 2(s1) entered forwarding state [ 401.346201][ T2793] bond0: (slave eth2): Enslaving as a backup interface with an up link [ 401.348414][ T50] br0: port 4(s2) entered blocking state [ 401.348857][ T50] br0: port 4(s2) entered forwarding state [ 401.519669][ T250] bond0: (slave eth0): link status definitely down, disabling slave [ 401.526522][ T250] bond0: (slave eth1): link status definitely down, disabling slave [ 401.526986][ T250] bond0: (slave eth2): making interface the new active one [ 401.629470][ T250] bond0: (slave eth0): link status definitely up [ 401.630089][ T250] bond0: (slave eth1): link status definitely up [...] # TEST: prio (active-backup ns_ip6_target primary_reselect 1) [FAIL] # Current active slave is eth2 but not eth1 Fix it by setting active slave to primary slave specifically before testing. [1] https://netdev-3.bots.linux.dev/vmksft-bonding-dbg/results/464301/1-bond-options-sh/stdout Fixes: 481b56e0 ("selftests: bonding: re-format bond option tests") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
- 18 Feb, 2024 20 commits
-
-
David S. Miller authored
Justin Chen says: ==================== net: bcmasp: bug fixes for bcmasp Fix two bugs. - Indicate that PM is managed by mac to prevent double pm calls. This doesn't lead to a crash, but waste a noticable amount of time suspending/resuming. - Sanity check for OOB write was off by one. Leading to a false error when using the full array. ==================== Signed-off-by: -
Justin Chen authored
A sanity check for OOB write is off by one leading to a false positive when the array is full. Fixes: 9b90aca9 ("net: ethernet: bcmasp: fix possible OOB write in bcmasp_netfilt_get_all_active()") Signed-off-by:
Justin Chen <justin.chen@broadcom.com> Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by:
-
Florian Fainelli authored
Avoid the PHY library call unnecessarily into the suspend/resume functions by setting phydev->mac_managed_pm to true. The ASP driver essentially does exactly what mdio_bus_phy_resume() does. Fixes: 490cb412 ("net: bcmasp: Add support for ASP2.0 Ethernet controller") Signed-off-by:
-
David S. Miller authored
Matthieu Baerts says: ==================== mptcp: misc. fixes for v6.8 This series includes 4 types of fixes: Patches 1 and 2 force the path-managers not to allocate a new address entry when dealing with the "special" ID 0, reserved to the address of the initial subflow. These patches can be backported up to v5.19 and v5.12 respectively. Patch 3 to 6 fix the in-kernel path-manager not to create duplicated subflows. Patch 6 is the main fix, but patches 3 to 5 are some kind of pre-requisities: they fix some data races that could also lead to the creation of unexpected subflows. These patches can be backported up to v5.7, v5.10, v6.0, and v5.15 respectively. Note that patch 3 modifies the existing ULP API. No better solutions have been found for -net, and there is some similar prior art, see commit 0df48c26 ("tcp: add tcpi_bytes_acked to tcp_info"). Please also note that TLS ULP Diag has likely the same issue. Patches 7 to 9 fix issues in the selftests, when executing them on older kernels, e.g. when testing the last version of these kselftests on the v5.15.148 kernel as it is done by LKFT when validating stable kernels. These patches only avoid printing expected errors the console and marking some tests as "OK" while they have been skipped. Patches 7 and 8 can be backported up to v6.6. Patches 10 to 13 make sure all MPTCP selftests subtests have a unique name. It is important to have a unique (sub)test name in TAP, because that's the test identifier. Some CI environments might drop tests with duplicated names. Patches 10 to 12 can be backported up to v6.6. ==================== Signed-off-by:
Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by:
-
Matthieu Baerts (NGI0) authored
It is important to have a unique (sub)test name in TAP, because some CI environments drop tests with duplicated name. Some 'cestab' subtests from the diag selftest had the same names, e.g.: ....chk 0 cestab Now the previous value is taken, to have different names, e.g.: ....chk 2->0 cestab after flush While at it, the 'after flush' info is added, similar to what is done with the 'in use' subtests. Also inspired by these 'in use' subtests, 'many' is displayed instead of a large number: many msk socket present [ ok ] ....chk many msk in use [ ok ] ....chk many cestab [ ok ] ....chk many->0 msk in use after flush [ ok ] ....chk many->0 cestab after flush [ ok ] Fixes: 81ab7728 ("selftests: mptcp: diag: check CURRESTAB counters") Cc: stable@vger.kernel.org Reviewed-by:Geliang Tang <geliang@kernel.org> Signed-off-by:
-
Matthieu Baerts (NGI0) authored
It is important to have a unique (sub)test name in TAP, because some CI environments drop tests with duplicated name. Some 'in use' subtests from the diag selftest had the same names, e.g.: chk 0 msk in use after flush Now the previous value is taken, to have different names, e.g.: chk 2->0 msk in use after flush While at it, avoid repeating the full message, declare it once in the helper. Fixes: ce990257 ("selftests: mptcp: diag: format subtests results in TAP") Cc: stable@vger.kernel.org Reviewed-by: -
Matthieu Baerts (NGI0) authored
It is important to have a unique (sub)test name in TAP, because some CI environments drop tests with duplicated names. Some subtests from the userspace_pm selftest had the same names. That's because different subflows are created (and deleted) between the same pair of IP addresses. Simply adding the destination port in the name is then enough to have different names, because the destination port is always different. Note that adding such info takes a bit more space, so we need to increase a bit the width to print the name, simply to keep all the '[ OK ]' aligned as before. Fixes: f589234e ("selftests: mptcp: userspace_pm: format subtests results in TAP") Cc: stable@vger.kernel.org Reviewed-by:
-
Matthieu Baerts (NGI0) authored
The selftest was correctly recording all the results, but the 'reverse direction' part was missing in the name when needed. It is important to have a unique (sub)test name in TAP, because some CI environments drop tests with duplicated name. Fixes: 675d9933 ("selftests: mptcp: simult flows: format subtests results in TAP") Cc: stable@vger.kernel.org Reviewed-by:
-
Matthieu Baerts (NGI0) authored
Since the 'Fixes' commit mentioned below, the command that is executed in __chk_nr() helper can return nothing if the feature is not supported. This is the case when the MPTCP CURRESTAB counter is not supported. To avoid this warning ... ./diag.sh: line 65: [: !=: unary operator expected ... we just need to surround '$nr' with double quotes, to support an empty string when the feature is not supported. Fixes: 81ab7728 ("selftests: mptcp: diag: check CURRESTAB counters") Cc: stable@vger.kernel.org Reviewed-by:
-
Matthieu Baerts (NGI0) authored
Since the 'Fixes' commit mentioned below, and if the kernel being tested doesn't support the 'fullmesh' flag, this error will be printed: netlink error -22 (Invalid argument) ./pm_nl_ctl: bailing out due to netlink error[s] But that can be normal if the kernel doesn't support the feature, no need to print this worrying error message while everything else looks OK. So we can mute stderr. Failures will still be detected if any. Fixes: 1dc88d24 ("selftests: mptcp: pm_nl_ctl: always look for errors") Cc: stable@vger.kernel.org Reviewed-by:
-
Matthieu Baerts (NGI0) authored
If the feature is not supported by older kernels, and instead of just ignoring some tests, we should mark them as skipped, so we can still track them. Fixes: d85555ac ("selftests: mptcp: pm_netlink: format subtests results in TAP") Cc: stable@vger.kernel.org Reviewed-by:
-
Paolo Abeni authored
Fullmesh endpoints could end-up unexpectedly generating duplicate subflows - same local and remote addresses - when multiple incoming ADD_ADDR are processed before the PM creates the subflow for the local endpoints. Address the issue explicitly checking for duplicates at subflow creation time. To avoid a quadratic computational complexity, track the unavailable remote address ids in a temporary bitmap and initialize such bitmap with the remote ids of all the existing subflows matching the local address currently processed. The above allows additionally replacing the existing code checking for duplicate entry in the current set with a simple bit test operation. Fixes: 2843ff6f ("mptcp: remote addresses fullmesh") Cc: stable@vger.kernel.org Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/435Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Mat Martineau <martineau@kernel.org> Signed-off-by:
-
Paolo Abeni authored
Similar to the previous patch, address the data race on remote_id, adding the suitable ONCE annotations. Fixes: bedee0b5 ("mptcp: address lookup improvements") Cc: stable@vger.kernel.org Signed-off-by:
-
Paolo Abeni authored
The local address id is accessed lockless by the NL PM, add all the required ONCE annotation. There is a caveat: the local id can be initialized late in the subflow life-cycle, and its validity is controlled by the local_id_valid flag. Remove such flag and encode the validity in the local_id field itself with negative value before initialization. That allows accessing the field consistently with a single read operation. Fixes: 0ee4261a ("mptcp: implement mptcp_pm_remove_subflow") Cc: stable@vger.kernel.org Signed-off-by:
-
Paolo Abeni authored
Since the introduction of the subflow ULP diag interface, the dump callback accessed all the subflow data with lockless. We need either to annotate all the read and write operation accordingly, or acquire the subflow socket lock. Let's do latter, even if slower, to avoid a diffstat havoc. Fixes: 5147dfb5 ("mptcp: allow dumping subflow context to userspace") Cc: stable@vger.kernel.org Signed-off-by:
-
Geliang Tang authored
Just the same as userspace PM, a new parameter needs_id is added for in-kernel PM mptcp_pm_nl_append_new_local_addr() too. Add a new helper mptcp_pm_has_addr_attr_id() to check whether an address ID is set from PM or not. In mptcp_pm_nl_get_local_id(), needs_id is always true, but in mptcp_pm_nl_add_addr_doit(), pass mptcp_pm_has_addr_attr_id() to needs_it. Fixes: efd5a4c0 ("mptcp: add the address ID assignment bitmap") Cc: stable@vger.kernel.org Signed-off-by:
Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by:
-
Geliang Tang authored
When userspace PM requires to create an ID 0 subflow in "userspace pm create id 0 subflow" test like this: userspace_pm_add_sf $ns2 10.0.3.2 0 An ID 1 subflow, in fact, is created. Since in mptcp_pm_nl_append_new_local_addr(), 'id 0' will be treated as no ID is set by userspace, and will allocate a new ID immediately: if (!e->addr.id) e->addr.id = find_next_zero_bit(pernet->id_bitmap, MPTCP_PM_MAX_ADDR_ID + 1, 1); To solve this issue, a new parameter needs_id is added for mptcp_userspace_pm_append_new_local_addr() to distinguish between whether userspace PM has set an ID 0 or whether userspace PM has not set any address. needs_id is true in mptcp_userspace_pm_get_local_id(), but false in mptcp_pm_nl_announce_doit() and mptcp_pm_nl_subflow_create_doit(). Fixes: e5ed101a ("mptcp: userspace pm allow creating id 0 subflow") Cc: stable@vger.kernel.org Signed-off-by: -
David S. Miller authored
Eric Dumazet says: ==================== inet: fix NLM_F_DUMP_INTR logic Make sure NLM_F_DUMP_INTR is generated if dev_base_seq and dev_addr_genid are changed by the same amount. ==================== Signed-off-by: -
Eric Dumazet authored
net->dev_base_seq and ipv6.dev_addr_genid are monotonically increasing. If we XOR their values, we could miss to detect if both values were changed with the same amount. Fixes: 63998ac2 ("ipv6: provide addr and netconf dump consistency info") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Eric Dumazet authored
net->dev_base_seq and ipv4.dev_addr_genid are monotonically increasing. If we XOR their values, we could miss to detect if both values were changed with the same amount. Fixes: 0465277f ("ipv4: provide addr and netconf dump consistency info") Signed-off-by:
-
- 17 Feb, 2024 1 commit
-
-
Pavel Sakharov authored
If 'dev' or 'data' is NULL, the 'priv' variable has an incorrect address when dereferencing calling netdev_err(). Since we get as 'dev_id' or 'data' what was passed as the 'dev' argument to request_irq() during interrupt initialization (that is, the net_device and rx/tx queue pointers initialized at the time of the call) and since there are usually no checks for the 'dev_id' argument in such handlers in other drivers, remove these checks from the handlers in stmmac driver. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 8532f613 ("net: stmmac: introduce MSI Interrupt routines for mac, safety, RX & TX") Signed-off-by:
Pavel Sakharov <p.sakharov@ispras.ru> Reviewed-by:
Serge Semin <fancer.lancer@gmail.com> Signed-off-by:
-
- 16 Feb, 2024 8 commits
-
-
Jakub Kicinski authored
If we're redirecting the skb, and haven't called tcf_mirred_forward(), yet, we need to tell the core to drop the skb by setting the retcode to SHOT. If we have called tcf_mirred_forward(), however, the skb is out of our hands and returning SHOT will lead to UaF. Move the retval override to the error path which actually need it. Reviewed-by:
Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Fixes: e5cf1baf ("act_mirred: use TC_ACT_REINSERT when possible") Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Jakub Kicinski authored
The test Davide added in commit ca22da2f ("act_mirred: use the backlog for nested calls to mirred ingress") hangs our testing VMs every 10 or so runs, with the familiar tcp_v4_rcv -> tcp_v4_rcv deadlock reported by lockdep. The problem as previously described by Davide (see Link) is that if we reverse flow of traffic with the redirect (egress -> ingress) we may reach the same socket which generated the packet. And we may still be holding its socket lock. The common solution to such deadlocks is to put the packet in the Rx backlog, rather than run the Rx path inline. Do that for all egress -> ingress reversals, not just once we started to nest mirred calls. In the past there was a concern that the backlog indirection will lead to loss of error reporting / less accurate stats. But the current workaround does not seem to address the issue. Fixes: 53592b36 ("net/sched: act_mirred: Implement ingress actions") Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Suggested-by:
Davide Caratti <dcaratti@redhat.com> Link: https://lore.kernel.org/netdev/33dc43f587ec1388ba456b4915c75f02a8aae226.1663945716.git.dcaratti@redhat.com/Signed-off-by:
-
Randy Dunlap authored
This driver uses functions that are supplied by the Kconfig symbol PHYLIB, so select it to ensure that they are built as needed. When CONFIG_ADIN1110=y and CONFIG_PHYLIB=m, there are multiple build (linker) errors that are resolved by this Kconfig change: ld: drivers/net/ethernet/adi/adin1110.o: in function `adin1110_net_open': drivers/net/ethernet/adi/adin1110.c:933: undefined reference to `phy_start' ld: drivers/net/ethernet/adi/adin1110.o: in function `adin1110_probe_netdevs': drivers/net/ethernet/adi/adin1110.c:1603: undefined reference to `get_phy_device' ld: drivers/net/ethernet/adi/adin1110.c:1609: undefined reference to `phy_connect' ld: drivers/net/ethernet/adi/adin1110.o: in function `adin1110_disconnect_phy': drivers/net/ethernet/adi/adin1110.c:1226: undefined reference to `phy_disconnect' ld: drivers/net/ethernet/adi/adin1110.o: in function `devm_mdiobus_alloc': include/linux/phy.h:455: undefined reference to `devm_mdiobus_alloc_size' ld: drivers/net/ethernet/adi/adin1110.o: in function `adin1110_register_mdiobus': drivers/net/ethernet/adi/adin1110.c:529: undefined reference to `__devm_mdiobus_register' ld: drivers/net/ethernet/adi/adin1110.o: in function `adin1110_net_stop': drivers/net/ethernet/adi/adin1110.c:958: undefined reference to `phy_stop' ld: drivers/net/ethernet/adi/adin1110.o: in function `adin1110_disconnect_phy': drivers/net/ethernet/adi/adin1110.c:1226: undefined reference to `phy_disconnect' ld: drivers/net/ethernet/adi/adin1110.o: in function `adin1110_adjust_link': drivers/net/ethernet/adi/adin1110.c:1077: undefined reference to `phy_print_status' ld: drivers/net/ethernet/adi/adin1110.o: in function `adin1110_ioctl': drivers/net/ethernet/adi/adin1110.c:790: undefined reference to `phy_do_ioctl' ld: drivers/net/ethernet/adi/adin1110.o:(.rodata+0xf60): undefined reference to `phy_ethtool_get_link_ksettings' ld: drivers/net/ethernet/adi/adin1110.o:(.rodata+0xf68): undefined reference to `phy_ethtool_set_link_ksettings' Fixes: bc93e19d ("net: ethernet: adi: Add ADIN1110 support") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202402070626.eZsfVHG5-lkp@intel.com/ Cc: Lennart Franzen <lennart@lfdomain.com> Cc: Alexandru Tachici <alexandru.tachici@analog.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Reviewed-by:
Nuno Sa <nuno.sa@analog.com> Signed-off-by:
-
Kuniyuki Iwashima authored
syzkaller reported a warning [0] in inet_csk_destroy_sock() with no repro. WARN_ON(inet_sk(sk)->inet_num && !inet_csk(sk)->icsk_bind_hash); However, the syzkaller's log hinted that connect() failed just before the warning due to FAULT_INJECTION. [1] When connect() is called for an unbound socket, we search for an available ephemeral port. If a bhash bucket exists for the port, we call __inet_check_established() or __inet6_check_established() to check if the bucket is reusable. If reusable, we add the socket into ehash and set inet_sk(sk)->inet_num. Later, we look up the corresponding bhash2 bucket and try to allocate it if it does not exist. Although it rarely occurs in real use, if the allocation fails, we must revert the changes by check_established(). Otherwise, an unconnected socket could illegally occupy an ehash entry. Note that we do not put tw back into ehash because sk might have already responded to a packet for tw and it would be better to free tw earlier under such memory presure. [0]: WARNING: CPU: 0 PID: 350830 at net/ipv4/inet_connection_sock.c:1193 inet_csk_destroy_sock (net/ipv4/inet_connection_sock.c:1193) Modules linked in: Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:inet_csk_destroy_sock (net/ipv4/inet_connection_sock.c:1193) Code: 41 5c 41 5d 41 5e e9 2d 4a 3d fd e8 28 4a 3d fd 48 89 ef e8 f0 cd 7d ff 5b 5d 41 5c 41 5d 41 5e e9 13 4a 3d fd e8 0e 4a 3d fd <0f> 0b e9 61 fe ff ff e8 02 4a 3d fd 4c 89 e7 be 03 00 00 00 e8 05 RSP: 0018:ffffc9000b21fd38 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000009e78 RCX: ffffffff840bae40 RDX: ffff88806e46c600 RSI: ffffffff840bb012 RDI: ffff88811755cca8 RBP: ffff88811755c880 R08: 0000000000000003 R09: 0000000000000000 R10: 0000000000009e78 R11: 0000000000000000 R12: ffff88811755c8e0 R13: ffff88811755c892 R14: ffff88811755c918 R15: 0000000000000000 FS: 00007f03e5243800(0000) GS:ffff88811ae00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b32f21000 CR3: 0000000112ffe001 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> ? inet_csk_destroy_sock (net/ipv4/inet_connection_sock.c:1193) dccp_close (net/dccp/proto.c:1078) inet_release (net/ipv4/af_inet.c:434) __sock_release (net/socket.c:660) sock_close (net/socket.c:1423) __fput (fs/file_table.c:377) __fput_sync (fs/file_table.c:462) __x64_sys_close (fs/open.c:1557 fs/open.c:1539 fs/open.c:1539) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:129) RIP: 0033:0x7f03e53852bb Code: 03 00 00 00 0f 05 48 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 43 c9 f5 ff 8b 7c 24 0c 41 89 c0 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 44 89 c7 89 44 24 0c e8 a1 c9 f5 ff 8b 44 RSP: 002b:00000000005dfba0 EFLAGS: 00000293 ORIG_RAX: 0000000000000003 RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007f03e53852bb RDX: 0000000000000002 RSI: 0000000000000002 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000000 R09: 000000000000167c R10: 0000000008a79680 R11: 0000000000000293 R12: 00007f03e4e43000 R13: 00007f03e4e43170 R14: 00007f03e4e43178 R15: 00007f03e4e43170 </TASK> [1]: FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 0 CPU: 0 PID: 350833 Comm: syz-executor.1 Not tainted 6.7.0-12272-g2121c43f #9 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:107 (discriminator 1)) should_fail_ex (lib/fault-inject.c:52 lib/fault-inject.c:153) should_failslab (mm/slub.c:3748) kmem_cache_alloc (mm/slub.c:3763 mm/slub.c:3842 mm/slub.c:3867) inet_bind2_bucket_create (net/ipv4/inet_hashtables.c:135) __inet_hash_connect (net/ipv4/inet_hashtables.c:1100) dccp_v4_connect (net/dccp/ipv4.c:116) __inet_stream_connect (net/ipv4/af_inet.c:676) inet_stream_connect (net/ipv4/af_inet.c:747) __sys_connect_file (net/socket.c:2048 (discriminator 2)) __sys_connect (net/socket.c:2065) __x64_sys_connect (net/socket.c:2072) do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:129) RIP: 0033:0x7f03e5284e5d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 9f 1b 00 f7 d8 64 89 01 48 RSP: 002b:00007f03e4641cc8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 00000000004bbf80 RCX: 00007f03e5284e5d RDX: 0000000000000010 RSI: 0000000020000000 RDI: 0000000000000003 RBP: 00000000004bbf80 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 R13: 000000000000000b R14: 00007f03e52e5530 R15: 0000000000000000 </TASK> Reported-by:
syzkaller <syzkaller@googlegroups.com> Fixes: 28044fc1 ("net: Add a bhash2 table hashed by port and address") Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by:
-
David S. Miller authored
Tobias Waldekranz says: ==================== net: bridge: switchdev: Ensure MDB events are delivered exactly once When a device is attached to a bridge, drivers will request a replay of objects that were created before the device joined the bridge, that are still of interest to the joining port. Typical examples include FDB entries and MDB memberships on other ports ("foreign interfaces") or on the bridge itself. Conversely when a device is detached, the bridge will synthesize deletion events for all those objects that are still live, but no longer applicable to the device in question. This series eliminates two races related to the synching and unsynching phases of a bridge's MDB with a joining or leaving device, that would cause notifications of such objects to be either delivered twice (1/2), or not at all (2/2). A similar race to the one solved by 1/2 still remains for the FDB. This is much harder to solve, due to the lockless operation of the FDB's rhashtable, and is therefore knowingly left out of this series. v1 -> v2: - Squash the previously separate addition of switchdev_port_obj_act_is_deferred into first consumer. - Use ether_addr_equal to compare MAC addresses. - Document switchdev_port_obj_act_is_deferred (renamed from switchdev_port_obj_is_deferred in v1, to indicate that we also match on the action). - Delay allocations of MDB objects until we know they're needed. - Use non-RCU version of the hash list iterator, now that the MDB is not scanned while holding the RCU read lock. - Add Fixes tag to commit message v2 -> v3: - Fix unlocking in error paths - Access RCU protected port list via mlock_dereference, since MDB is guaranteed to remain constant for the duration of the scan. v3 -> v4: - Limit the search for exiting deferred events in 1/2 to only apply to additions, since the problem does not exist in the deletion case. - Add 2/2, to plug a related race when unoffloading an indirectly associated device. v4 -> v5: - Fix grammatical errors in kerneldoc of switchdev_port_obj_act_is_deferred ==================== Signed-off-by: -
Tobias Waldekranz authored
When unoffloading a device, it is important to ensure that all relevant deferred events are delivered to it before it disassociates itself from the bridge. Before this change, this was true for the normal case when a device maps 1:1 to a net_bridge_port, i.e. br0 / swp0 When swp0 leaves br0, the call to switchdev_deferred_process() in del_nbp() makes sure to process any outstanding events while the device is still associated with the bridge. In the case when the association is indirect though, i.e. when the device is attached to the bridge via an intermediate device, like a LAG... br0 / lag0 / swp0 ...then detaching swp0 from lag0 does not cause any net_bridge_port to be deleted, so there was no guarantee that all events had been processed before the device disassociated itself from the bridge. Fix this by always synchronously processing all deferred events before signaling completion of unoffloading back to the driver. Fixes: 4e51bf44 ("net: bridge: move the switchdev object replay helpers to "push" mode") Signed-off-by:Tobias Waldekranz <tobias@waldekranz.com> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Signed-off-by:
-
Tobias Waldekranz authored
Before this change, generation of the list of MDB events to replay would race against the creation of new group memberships, either from the IGMP/MLD snooping logic or from user configuration. While new memberships are immediately visible to walkers of br->mdb_list, the notification of their existence to switchdev event subscribers is deferred until a later point in time. So if a replay list was generated during a time that overlapped with such a window, it would also contain a replay of the not-yet-delivered event. The driver would thus receive two copies of what the bridge internally considered to be one single event. On destruction of the bridge, only a single membership deletion event was therefore sent. As a consequence of this, drivers which reference count memberships (at least DSA), would be left with orphan groups in their hardware database when the bridge was destroyed. This is only an issue when replaying additions. While deletion events may still be pending on the deferred queue, they will already have been removed from br->mdb_list, so no duplicates can be generated in that scenario. To a user this meant that old group memberships, from a bridge in which a port was previously attached, could be reanimated (in hardware) when the port joined a new bridge, without the new bridge's knowledge. For example, on an mv88e6xxx system, create a snooping bridge and immediately add a port to it: root@infix-06-0b-00:~$ ip link add dev br0 up type bridge mcast_snooping 1 && \ > ip link set dev x3 up master br0 And then destroy the bridge: root@infix-06-0b-00:~$ ip link del dev br0 root@infix-06-0b-00:~$ mvls atu ADDRESS FID STATE Q F 0 1 2 3 4 5 6 7 8 9 a DEV:0 Marvell 88E6393X 33:33:00:00:00:6a 1 static - - 0 . . . . . . . . . . 33:33:ff:87:e4:3f 1 static - - 0 . . . . . . . . . . ff:ff:ff:ff:ff:ff 1 static - - 0 1 2 3 4 5 6 7 8 9 a root@infix-06-0b-00:~$ The two IPv6 groups remain in the hardware database because the port (x3) is notified of the host's membership twice: once via the original event and once via a replay. Since only a single delete notification is sent, the count remains at 1 when the bridge is destroyed. Then add the same port (or another port belonging to the same hardware domain) to a new bridge, this time with snooping disabled: root@infix-06-0b-00:~$ ip link add dev br1 up type bridge mcast_snooping 0 && \ > ip link set dev x3 up master br1 All multicast, including the two IPv6 groups from br0, should now be flooded, according to the policy of br1. But instead the old memberships are still active in the hardware database, causing the switch to only forward traffic to those groups towards the CPU (port 0). Eliminate the race in two steps: 1. Grab the write-side lock of the MDB while generating the replay list. This prevents new memberships from showing up while we are generating the replay list. But it leaves the scenario in which a deferred event was already generated, but not delivered, before we grabbed the lock. Therefore: 2. Make sure that no deferred version of a replay event is already enqueued to the switchdev deferred queue, before adding it to the replay list, when replaying additions. Fixes: 4f2673b3 ("net: bridge: add helper to replay port and host-joined mdb entries") Signed-off-by: -
Alexander Gordeev authored
iucv_path_table is a dynamically allocated array of pointers to struct iucv_path items. Yet, its size is calculated as if it was an array of struct iucv_path items. Signed-off-by:
Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by:
Alexandra Winter <wintera@linux.ibm.com> Signed-off-by:
-
- 15 Feb, 2024 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from can, wireless and netfilter. Current release - regressions: - af_unix: fix task hung while purging oob_skb in GC - pds_core: do not try to run health-thread in VF path Current release - new code bugs: - sched: act_mirred: don't zero blockid when net device is being deleted Previous releases - regressions: - netfilter: - nat: restore default DNAT behavior - nf_tables: fix bidirectional offload, broken when unidirectional offload support was added - openvswitch: limit the number of recursions from action sets - eth: i40e: do not allow untrusted VF to remove administratively set MAC address Previous releases - always broken: - tls: fix races and bugs in use of async crypto - mptcp: prevent data races on some of the main socket fields, fix races in fastopen handling - dpll: fix possible deadlock during netlink dump operation - dsa: lan966x: fix crash when adding interface under a lag when some of the ports are disabled - can: j1939: prevent deadlock by changing j1939_socks_lock to rwlock Misc: - a handful of fixes and reliability improvements for selftests - fix sysfs documentation missing net/ in paths - finish the work of squashing the missing MODULE_DESCRIPTION() warnings in networking" * tag 'net-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (92 commits) net: fill in MODULE_DESCRIPTION()s for missing arcnet net: fill in MODULE_DESCRIPTION()s for mdio_devres net: fill in MODULE_DESCRIPTION()s for ppp net: fill in MODULE_DESCRIPTION()s for fddik/skfp net: fill in MODULE_DESCRIPTION()s for plip net: fill in MODULE_DESCRIPTION()s for ieee802154/fakelb net: fill in MODULE_DESCRIPTION()s for xen-netback net: ravb: Count packets instead of descriptors in GbEth RX path pppoe: Fix memory leak in pppoe_sendmsg() net: sctp: fix skb leak in sctp_inq_free() net: bcmasp: Handle RX buffer allocation failure net-timestamp: make sk_tskey more predictable in error path selftests: tls: increase the wait in poll_partial_rec_async ice: Add check for lport extraction to LAG init netfilter: nf_tables: fix bidirectional offload regression netfilter: nat: restore default DNAT behavior netfilter: nft_set_pipapo: fix missing : in kdoc igc: Remove temporary workaround igb: Fix string truncation warnings in igb_set_fw_version can: netlink: Fix TDCO calculation using the old data bittiming ... -
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fixes from Juergen Gross: "Fixes and simple cleanups: - use a proper flexible array instead of a one-element array in order to avoid array-bounds sanitizer errors - add NULL pointer checks after allocating memory - use memdup_array_user() instead of open-coding it - fix a rare race condition in Xen event channel allocation code - make struct bus_type instances const - make kerneldoc inline comments match reality" * tag 'for-linus-6.8a-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/events: close evtchn after mapping cleanup xen/gntalloc: Replace UAPI 1-element array xen: balloon: make balloon_subsys const xen: pcpu: make xen_pcpu_subsys const xen/privcmd: Use memdup_array_user() in alloc_ioreq() x86/xen: Add some null pointer checking to smp.c xen/xenbus: document will_handle argument for xenbus_watch_path() -
Linus Torvalds authored
In commit 4356e9f8 ("work around gcc bugs with 'asm goto' with outputs") I did the gcc workaround unconditionally, because the cause of the bad code generation wasn't entirely clear. In the meantime, Jakub Jelinek debugged the issue, and has come up with a fix in gcc [2], which also got backported to the still maintained branches of gcc-11, gcc-12 and gcc-13. Note that while the fix technically wasn't in the original gcc-14 branch, Jakub says: "while it is true that no GCC 14 snapshots until today (or whenever the fix will be committed) have the fix, for GCC trunk it is up to the distros to use the latest snapshot if they use it at all and would allow better testing of the kernel code without the workaround, so that if there are other issues they won't be discovered years later. Most userland code doesn't actually use asm goto with outputs..." so we will consider gcc-14 to be fixed - if somebody is using gcc snapshots of the gcc-14 before the fix, they should upgrade. Note that while the bug goes back to gcc-11, in practice other gcc changes seem to have effectively hidden it since gcc-12.1 as per a bisect by Jakub. So even a gcc-14 snapshot without the fix likely doesn't show actual problems. Also, make the default 'asm_goto_output()' macro mark the asm as volatile by hand, because of an unrelated gcc issue [1] where it doesn't match the documented behavior ("asm goto is always volatile"). Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=103979 [1] Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=113921 [2] Link: https://lore.kernel.org/all/20240208220604.140859-1-seanjc@google.com/Requested-by:
Jakub Jelinek <jakub@redhat.com> Cc: Uros Bizjak <ubizjak@gmail.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Andrew Pinski <quic_apinski@quicinc.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull devicetree fixes from Rob Herring: - Improve devlink dependency parsing for DT graphs - Fix devlink handling of io-channels dependencies - Fix PCI addressing in marvell,prestera example - A few schema fixes for property constraints - Improve performance of DT unprobed devices kselftest - Fix regression in DT_SCHEMA_FILES handling - Fix compile error in unittest for !OF_DYNAMIC * tag 'devicetree-fixes-for-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: ufs: samsung,exynos-ufs: Add size constraints on "samsung,sysreg" of: property: Add in-ports/out-ports support to of_graph_get_port_parent() of: property: Improve finding the supplier of a remote-endpoint property of: property: Improve finding the consumer of a remote-endpoint property net: marvell,prestera: Fix example PCI bus addressing of: unittest: Fix compile in the non-dynamic case of: property: fix typo in io-channels dt-bindings: tpm: Drop type from "resets" dt-bindings: display: nxp,tda998x: Fix 'audio-ports' constraints dt-bindings: xilinx: replace Piyush Mehta maintainership kselftest: dt: Stop relying on dirname to improve performance dt-bindings: don't anchor DT_SCHEMA_FILES to bindings directory
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds authored
Pull spi fixes from Mark Brown: "A smallish collection of fixes for SPI, all driver specific, plus one device ID addition for a new Intel part. The ppc4xx isn't routinely covered by most of the automated testing so there were some errors that were missed in some of the recent API conversions, otherwise there's nothing super remarkable here" * tag 'spi-fix-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi-mxs: Fix chipselect glitch spi: intel-pci: Add support for Lunar Lake-M SPI serial flash spi: omap2-mcspi: Revert FIFO support without DMA spi: ppc4xx: Drop write-only variable spi: ppc4xx: Fix fallout from rename in struct spi_bitbang spi: ppc4xx: Fix fallout from include cleanup spi: spi-ppc4xx: include missing platform_device.h spi: imx: fix the burst length at DMA mode and CPU mode
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmapLinus Torvalds authored
Pull regmap test fixes from Mark Brown: "Guenter runs a lot of KUnit tests so noticed that there were a couple of the regmap tests, including the newly added noinc test, which could show spurious failures due to the use of randomly generated test values. These changes handle the randomly generated data properly" * tag 'regmap-fix-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: kunit: Ensure that changed bytes are actually different regmap: kunit: fix raw noinc write test wrapping
-
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hidLinus Torvalds authored
Pull HID fixes from Jiri Kosina: - fix for 'MSC_SERIAL = 0' corner case handling in wacom driver (Jason Gerecke) - ACPI S3 suspend/resume fix for intel-ish-hid (Even Xu) - race condition fix preventing Wacom driver from losing events shortly after initialization (Jason Gerecke) - fix preventing certain Logitech HID++ devices from spamming kernel log (Oleksandr Natalenko) * tag 'hid-for-linus-2024021501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: wacom: generic: Avoid reporting a serial of '0' to userspace HID: Intel-ish-hid: Ishtp: Fix sensor reads after ACPI S3 suspend HID: multitouch: Add required quirk for Synaptics 0xcddc device HID: wacom: Do not register input devices until after hid_hw_start HID: logitech-hidpp: Do not flood kernel log
-
