- 30 Jan, 2007 40 commits
-
-
Linus Torvalds authored
This reverts commit 0c0b3ae6. Quoth David: "Jeff, please revert It's wrong. We had a lengthy analysis of this piece of code several months ago, and it is correct. Consider, if we run the loop and we get an error the following happens: 1) attempt of ifb_init_one(i) fails, therefore we should not try to "ifb_free_one()" on "i" since it failed 2) the loop iteration first increments "i", then it check for error Therefore we must decrement "i" twice before the first free during the cleanup. One to "undo" the for() loop increment, and one to "skip" the ifb_init_one() case which failed." Reported-by:
David Miller <davem@davemloft.net> Acked-by:
Jeff Garzik <jgarzik@pobox.com> Cc: Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Serge E. Hallyn authored
This is based on a patch by Eric W. Biederman, who pointed out that pid namespaces are still fake, and we only have one ever active. So for the time being, we can modify any code which could access tsk->nsproxy->pid_ns during task exit to just use &init_pid_ns instead, and move the exit_task_namespaces call in do_exit() back above exit_notify(), so that an exiting nfs server has a valid tsk->sighand to work with. Long term, pulling pid_ns out of nsproxy might be the cleanest solution. Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> [ Eric's patch fixed to take care of free_pid() too ] Signed-off-by:
Serge E. Hallyn <serue@us.ibm.com> Signed-off-by:
-
Linus Torvalds authored
This reverts commit 7a238fcb in preparation for a better and simpler fix proposed by Eric Biederman (and fixed up by Serge Hallyn) Acked-by:
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: fix translation for START STOP UNIT libata-scsi: ata_task_ioctl should return ATA registers from sense data pata_platform: set_mode fix ata_if_xfermask() word 51 fix pata_sil680: PIO1 taskfile transfers overclocking fix (repost) libata: fix ata_eh_suspend() return value ahci: port_no should be used when clearing IRQ in ahci_thaw() Fix trivial conflict in drivers/ata/pata_platform.c manually
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Remove unneeded errata workaround from p4-clockmod. [CPUFREQ] check sysfs_create_link return value
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart: [AGPGART] Add new IDs to VIA AGP. [AGPGART] Remove pointless assignment. [AGPGART] Remove pointless typedef in ati-agp [AGPGART] Prevent (unlikely) memory leak in amd_create_gatt_pages() [AGPGART] intel_agp: restore graphics device's pci space early in resume
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: via82cxxx/pata_via: correct PCI_DEVICE_ID_VIA_SATA_EIDE ID and add support for CX700 and 8237S ide: unregister idepnp driver on unload ide: add missing __init tags to IDE PCI host drivers ia64: add pci_get_legacy_ide_irq() ide/generic: Jmicron has its own drivers now atiixp.c: add cable detection support for ATI IDE atiixp.c: sb600 ide only has one channel atiixp.c: remove unused code jmicron: fix warning ide: update MAINTAINERS entry
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: Broadcom 4400 resume small fix b44: src_desc->addr is little-endian e100: fix irq leak on suspend/resume bonding: ARP monitoring broken on x86_64 ehea: Fixed missing tasklet_kill() call ehea: Fixed wrong jumbo frames status query 82596 warning fixes FS_ENET: OF-related fixup for FEC and SCC MAC's net: ifb error path loop fix b44: Fix frequent link changes
-
Al Viro authored
Kconfig recognizes the end of help text by receding indentation depth. Recent patch had broken HOST_VMSPLIT_... choice in arch/um/Kconfig.i386 - all alternatives are interpreted as part of help text now. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
do { } while(0) is not a good imitation of function returning void; use ((void)0) instead. Signed-off-by: -
Al Viro authored
no-op as all dma_sync_... there. Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
What DMA for 16bit pcmcia card, anyway? We never do request_dma() there and ->dma_channel never changes since initialization to -1. IOW, that call is dead code. Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds authored
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Fix typo of "CONFIG_MT_SMP". [MIPS] Ocelot G: Fix a few misspellings of CONFIG_GALILEO_GT64240_ETH [PATCH] Malta: Fix build if CONFIG_MTD is diabled.
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: [PATCH] ALSA: Fix sysfs breakage
-
Hugh Dickins authored
Nick Piggin points out that page accounting on MIPS multiple ZERO_PAGEs is not maintained by its move_pte, and could lead to freeing a ZERO_PAGE. Instead of complicating that move_pte, just forget the minor optimization when mremapping, and change the one thing which needed it for correctness - filemap_xip use ZERO_PAGE(0) throughout instead of according to address. [ "There is no block device driver one could use for XIP on mips platforms" - Carsten Otte ] Signed-off-by:
Hugh Dickins <hugh@veritas.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Andrew Morton <akpm@osdl.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Carsten Otte <cotte@de.ibm.com> Signed-off-by:
-
Eric W. Biederman authored
When the world was a simple and static place setting up irqs was easy. It sufficed to allocate a linux irq number and a find a free cpu vector we could receive that linux irq on. In those days it was a safe assumption that any allocated vector was actually in use so after one global pass through all of the vectors we would have none left. These days things are much more dynamic with interrupt controllers (in the form of MSI or MSI-X) appearing on plug in cards and linux irqs appearing and disappearing. As these irqs come and go vectors are allocated and freed, invalidating the ancient assumption that all allocated vectors stayed in use forever. So this patch modifies the vector allocator to walk through every possible vector before giving up, and to check to see if a vector is in use before assigning it. With these changes we stop leaking freed vectors and it becomes possible to allocate and free irq vectors all day long. This changed was modeled after the vector allocator on x86_64 where this limitation has already been removed. In essence we don't update the static variables that hold the position of the last vector we allocated until have successfully allocated another vector. This allows us to detect if we have completed one complete scan through all of the possible vectors. Acked-by:
Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by:
-
Linus Torvalds authored
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 4117/1: S3C2412: Fix writel() usage in selection code [ARM] 4111/1: Allow VFP to work with thread migration on SMP [ARM] 4112/1: Only ioremap to supersections if DOMAIN_IO is zero [ARM] 4106/1: S3C2410: typo fixes in register definitions [ARM] 4102/1: Allow for PHYS_OFFSET on any valid 2MiB address [ARM] Fix AMBA serial drivers for non-first serial ports [ARM] 4100/1: iop3xx: fix cpu mask for iop333 [ARM] Update mach-types [ARM] Fix show_mem() for discontigmem [ARM] 4096/1: S3C24XX: change return code form s3c2410_gpio_getcfg() [ARM] 4095/1: S3C24XX: Fix GPIO set for Bank A [ARM] 4092/1: i.MX/MX1 CPU Frequency scaling latency definition [ARM] 4089/1: AT91: GPIO wake IRQ cleanup [ARM] 4088/1: AT91: Unbalanced IRQ in serial driver suspend/resume [ARM] 4087/1: AT91: CPU reset for SAM9x processors [ARM] 4086/1: AT91: Whitespace cleanup [ARM] 4085/1: AT91: Header fixes. [ARM] 4084/1: Remove CONFIG_DEBUG_WAITQ
-
Geert Uytterhoeven authored
`make help' in the build tree doesn't show the help texts about the `headers_install' and `headers_check' targets because it looks for include/asm-$(ARCH)/Kbuild in the wrong place. Add the missing `$(srctree)' prefixes to fix this. Also move the printing of the default install path for the headers inside the `if/fi', where it belongs. Signed-off-by:
Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Acked-by:
Oleg Verych <olecom@flower.upol.cz> Signed-off-by:
-
Jan Engelhardt authored
Apparently this broke due to missing `struct inode' declaration. Signed-off-by:
Jan Engelhardt <jengelh@gmx.de> Cc: Noah Watkins <nwatkins@ittc.ku.edu> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Evgeniy Dushistov authored
In blocks reallocation function sometimes does not update some of buffer_head::b_blocknr, which may and cause data damage. Signed-off-by:
Evgeniy Dushistov <dushistov@mail.ru> Signed-off-by:
-
Evgeniy Dushistov authored
During ufs_trunc_direct which is subroutine of ufs::truncate, we try the first of all free parts of block and then whole blocks. But we calculate size of block's part to free in the wrong way. This may cause bad update of used blocks and fragments statistic, and you can got report that you have free 32T on 1Gb partition. Signed-off-by:
-
Evgeniy Dushistov authored
These series of patches result of UFS1 write support stress testing, like running fsx-linux, untar and build linux kernel etc We pass from ufs::get_block_t to levels below: pointer to the current page, to make possible things like reallocation of blocks on the fly, and we also uses this pointer for indication, what actually we allocate data block or meta data block, but currently we make decision about what we allocate on the wrong level, this may and cause oops if we allocate blocks in some special order. Signed-off-by:
-
Miklos Szeredi authored
The BUG in fuse_ctl_add_dentry() could be triggered if the control filesystem was unmounted and mounted again while one or more fuse filesystems were present. The fix is to reset the dentry counter in fuse_ctl_kill_sb(). Bug reported by Florent Mertens. Signed-off-by:
Miklos Szeredi <miklos@szeredi.hu> Signed-off-by:
-
Mike Frysinger authored
Use __u8 rather than u8 in SIZE defines exported to userspace. Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
NeilBrown authored
Also remove {NFSD,RPC}_PARANOIA as having the defines doesn't really add anything. The printks covered by RPC_PARANOIA were triggered by badly formatted packets and so should be ratelimited. Signed-off-by:Neil Brown <neilb@suse.de> Signed-off-by:
-
Adrian Bunk authored
This patch adds missing newlines to dprintk's. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Andrew Morton authored
In file included from include/linux/crypto.h:26, from crypto/cipher.c:17: include/linux/uaccess.h: In function 'pagefault_disable': include/linux/uaccess.h:18: error: dereferencing pointer to incomplete type include/linux/uaccess.h: In function 'pagefault_enable': include/linux/uaccess.h:33: error: dereferencing pointer to incomplete type video_buf need PCI. Acked-by:Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by:
-
Robert P. J. Day authored
Fix what looks like an obvious typo in the file drivers/kvm/svm.c. Signed-off-by:
Robert P. J. Day <rpjday@mindspring.com> Acked-by:
Avi Kivity <avi@qumranet.com> Signed-off-by:
-
Mike Frysinger authored
Make sure exported I2O ioctls utilize userspace safe types. Signed-off-by:
-
Johannes Stezenbach authored
Fix UML hostfs mknod(): userspace has differernt dev_t size and encoding than kernel, so extract major/minor and reencode using glibc makedev() macro. Signed-off-by:
Johannes Stezenbach <js@linuxtv.org> Acked-by:
Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Cc: <stable@kernel.org> Signed-off-by:
-
Serge E. Hallyn authored
Fix exit race by splitting the nsproxy putting into two pieces. First piece reduces the nsproxy refcount. If we dropped the last reference, then it puts the mnt_ns, and returns the nsproxy as a hint to the caller. Else it returns NULL. The second piece of exiting task namespaces sets tsk->nsproxy to NULL, and drops the references to other namespaces and frees the nsproxy only if an nsproxy was passed in. A little awkward and should probably be reworked, but hopefully it fixes the NFS oops. Signed-off-by:
-
Dmitriy Monakhov authored
Some issues in b44_resume(). - Return value of pci_enable_device() was ignored. - If request_irq() has failed we have to just disable device and exit. Signed-off-by:
Dmitriy Monakhov <dmonakhov@openvz.org> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Al Viro authored
Signed-off-by:
-
Auke Kok authored
e100: fix irq leak on suspend/resume From: Frederik Deweerdt <frederik.deweerdt@gmail.com> The e100_resume() function should be calling netif_device_detach and free_irq. This fixes multiple irq's being allocated after resume. Signed-off-by:
Frederik Deweerdt <frederik.deweerdt@gmail.com> Signed-off-by:
-
Andy Gospodarek authored
While working with the latest bonding code I noticed a nasty problem that will prevent arp monitoring from always functioning correctly on x86_64 systems. Comparing ints to longs and expecting reliable results on x86_64 is a bad idea. With this patch, arp monitoring works correctly again. Signed-off-by:
Andy Gospodarek <andy@greyhouse.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Stephen Hemminger <shemminger@osdl.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by:
-
Thomas Klein authored
NEQ-Tasklet wasn't killed when module is removed. Signed-off-by:
Thomas Klein <tklein@de.ibm.com> Signed-off-by:
-
