It was not possible to create 1-tuple flow director
rule for IPv6 flow type. It was caused by incorrectly
checking for source IP address when validating user provided
destination IP address.

Fix this by changing ip6src to correct ip6dst address
in destination IP address validation for IPv6 flow type.

Fixes: efca91e8 ("i40e: Add flow director support for IPv6")
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

The ixgbe_ptp_start_cyclecounter is intended to be called whenever the
cyclecounter parameters need to be changed.

Since commit a9763f3c ("ixgbe: Update PTP to support X550EM_x
devices"), this function has cleared the SYSTIME registers and reset the
TSAUXC DISABLE_SYSTIME bit.

While these need to be cleared during ixgbe_ptp_reset, it is wrong to clear
them during ixgbe_ptp_start_cyclecounter. This function may be called
during both reset and link status change. When link changes, the SYSTIME
counter is still operating normally, but the cyclecounter should be updated
to account for the possibly changed parameters.

Clearing SYSTIME when link changes causes the timecounter to jump because
the cycle counter now reads zero.

Extract the SYSTIME initialization out to a new function and call this
during ixgbe_ptp_reset. This prevents the timecounter adjustment and avoids
an unnecessary reset of the current time.

This also restores the original SYSTIME clearing that occurred during
ixgbe_ptp_reset before the commit above.
Reported-by: Steve Payne <spayne@aurora.tech>
Reported-by: Ilya Evenbach <ievenbach@aurora.tech>
Fixes: a9763f3c ("ixgbe: Update PTP to support X550EM_x devices")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Kuniyuki Iwashima says:

====================
net: sysctl: Fix data-races around net.core.XXX

This series fixes data-races around all knobs in net_core_table and
netns_core_table except for bpf stuff.

These knobs are skipped:

  - 4 bpf knobs
  - netdev_rss_key: Written only once by net_get_random_once() and
                    read-only knob
  - rps_sock_flow_entries: Protected with sock_flow_mutex
  - flow_limit_cpu_bitmap: Protected with flow_limit_update_mutex
  - flow_limit_table_len: Protected with flow_limit_update_mutex
  - default_qdisc: Protected with qdisc_mod_lock
  - warnings: Unused
  - high_order_alloc_disable: Protected with static_key_mutex
  - skb_defer_max: Already using READ_ONCE()
  - sysctl_txrehash: Already using READ_ONCE()

Note 5th patch fixes net.core.message_cost and net.core.message_burst,
and lib/ratelimit.c does not have an explicit maintainer.

Changes:
  v3:
    * Fix build failures of CONFIG_SYSCTL=n case in 13th & 14th patches

  v2: https://lore.kernel.org/netdev/20220818035227.81567-1-kuniyu@amazon.com/
    * Remove 4 bpf knobs and added 6 knobs

  v1: https://lore.kernel.org/netdev/20220816052347.70042-1-kuniyu@amazon.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading sysctl_somaxconn, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading netdev_unregister_timeout_secs, it can be changed
concurrently.  Thus, we need to add READ_ONCE() to its reader.

Fixes: 5aa3afe1 ("net: make unregister netdev warning timeout configurable")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading gro_normal_batch, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 323ebb61 ("net: use listified RX for handling GRO_NORMAL skbs")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading sysctl_devconf_inherit_init_net, it can be changed
concurrently.  Thus, we need to add READ_ONCE() to its readers.

Fixes: 856c395c ("net: introduce a knob to control whether to inherit devconf config")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading sysctl_fb_tunnels_only_for_init_net, it can be changed
concurrently.  Thus, we need to add READ_ONCE() to its readers.

Fixes: 79134e6c ("net: do not create fallback tunnels for non-default namespaces")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading netdev_budget_usecs, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 7acf8a1e ("Replace 2 jiffies with sysctl netdev_budget_usecs to enable softirq tuning")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading sysctl_max_skb_frags, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.

Fixes: 5f74f82e ("net:Add sysctl_max_skb_frags")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading netdev_budget, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 51b0bded ("[NET]: Separate two usages of netdev_max_backlog.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading sysctl_net_busy_read, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 2d48d67f ("net: poll/select low latency socket support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading sysctl_net_busy_poll, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.

Fixes: 06021292 ("net: add low latency socket poll")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading sysctl_tstamp_allow_data, it can be changed
concurrently.  Thus, we need to add READ_ONCE() to its reader.

Fixes: b245be1f ("net-timestamp: no-payload only sysctl")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading sysctl_optmem_max, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading rs->interval and rs->burst, they can be changed
concurrently via sysctl (e.g. net_ratelimit_state).  Thus, we
need to add READ_ONCE() to their readers.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading netdev_tstamp_prequeue, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.

Fixes: 3b098e2d ("net: Consistent skb timestamping")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading netdev_max_backlog, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.

While at it, we remove the unnecessary spaces in the doc.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading weight_p, it can be changed concurrently.  Thus, we need
to add READ_ONCE() to its reader.

Also, dev_[rt]x_weight can be read/written at the same time.  So, we
need to use READ_ONCE() and WRITE_ONCE() for its access.  Moreover, to
use the same weight_p while changing dev_[rt]x_weight, we add a mutex
in proc_do_dev_weight().

Fixes: 3d48b53f ("net: dev_weight: TX/RX orthogonality")
Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While reading sysctl_[rw]mem_(max|default), they can be changed
concurrently.  Thus, we need to add READ_ONCE() to its readers.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

skb_copy_bits() could fail, which requires a check on the return
value.
Signed-off-by: Li Zhong <floridsleeves@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
pull request (net): ipsec 2022-08-24

1) Fix a refcount leak in __xfrm_policy_check.
   From Xin Xiong.

2) Revert "xfrm: update SA curlft.use_time". This
   violates RFC 2367. From Antony Antony.

3) Fix a comment on XFRMA_LASTUSED.
   From Antony Antony.

4) x->lastused is not cloned in xfrm_do_migrate.
   Fix from Antony Antony.

5) Serialize the calls to xfrm_probe_algs.
   From Herbert Xu.

6) Fix a null pointer dereference of dst->dev on a metadata
   dst in xfrm_lookup_with_ifid. From Nikolay Aleksandrov.

Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

On link state change, the controller gets reset,
causing PPS to drop out and the PHC to lose its
time and calibration. So we restart it if needed,
restoring calibration and time registers.

Changes since v2:
* Add `fec_ptp_save_state()`/`fec_ptp_restore_state()`
* Use `ktime_get_real_ns()`
* Use `BIT()` macro
Changes since v1:
* More ECR #define's
* Stop PPS in `fec_ptp_stop()`
Signed-off-by: Csókás Bence <csokas.bence@prolan.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So add all skb to
a tmp list, then free them after spin_unlock_irqrestore() at
once.

Fixes: 66ba215c ("neigh: fix possible DoS due to net iface start/stop loop")
Suggested-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5 fixes 2022-08-22

This series provides bug fixes to mlx5 driver.

* tag 'mlx5-fixes-2022-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5: Unlock on error in mlx5_sriov_enable()
  net/mlx5e: Fix use after free in mlx5e_fs_init()
  net/mlx5e: kTLS, Use _safe() iterator in mlx5e_tls_priv_tx_list_cleanup()
  net/mlx5: unlock on error path in esw_vfs_changed_event_handler()
  net/mlx5e: Fix wrong tc flag used when set hw-tc-offload off
  net/mlx5e: TC, Add missing policer validation
  net/mlx5e: Fix wrong application of the LRO state
  net/mlx5: Avoid false positive lockdep warning by adding lock_class_key
  net/mlx5: Fix cmd error logging for manage pages cmd
  net/mlx5: Disable irq when locking lag_lock
  net/mlx5: Eswitch, Fix forwarding decision to uplink
  net/mlx5: LAG, fix logic over MLX5_LAG_FLAG_NDEVS_READY
  net/mlx5e: Properly disable vlan strip on non-UL reps
====================

Link: https://lore.kernel.org/r/20220822195917.216025-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
ice: xsk: reduced queue count fixes

Maciej Fijalkowski says:

this small series is supposed to fix the issues around AF_XDP usage with
reduced queue count on interface. Due to the XDP rings setup, some
configurations can result in sockets not seeing traffic flowing. More
about this in description of patch 2.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  ice: xsk: use Rx ring's XDP ring when picking NAPI context
  ice: xsk: prohibit usage of non-balanced queue id
====================

Link: https://lore.kernel.org/r/20220822163257.2382487-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Michael Chan says:

====================
bnxt_en: Bug fixes

This series includes 2 fixes for regressions introduced by the XDP
multi-buffer feature, 1 devlink reload bug fix, and 1 SRIOV resource
accounting bug fix.
====================

Link: https://lore.kernel.org/r/1661180814-19350-1-git-send-email-michael.chan@broadcom.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

LRO/GRO_HW should be disabled if there is an attached XDP program.
BNXT_FLAG_TPA is the current setting of the LRO/GRO_HW.  Using
BNXT_FLAG_TPA to disable LRO/GRO_HW will cause these features to be
permanently disabled once they are disabled.

Fixes: 1dc4c557 ("bnxt: adding bnxt_xdp_build_skb to build skb from multibuffer xdp_buff")
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

There are 2 issues:

1. We should decrement hw_resc->max_nqs instead of hw_resc->max_irqs
   with the number of NQs assigned to the VFs.  The IRQs are fixed
   on each function and cannot be re-assigned.  Only the NQs are being
   assigned to the VFs.

2. vf_msix is the total number of NQs to be assigned to the VFs.  So
   we should decrement vf_msix from hw_resc->max_nqs.

Fixes: b16b6891 ("bnxt_en: Add SR-IOV support for 57500 chips.")
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add missing devlink_set_features() API for callbacks reload_down
and reload_up to function.

Fixes: 228ea8c1 ("bnxt_en: implement devlink dev reload driver_reinit")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Using BNXT_PAGE_MODE_BUF_SIZE + offset as buffer length value is not
sufficient when running single buffer XDP programs doing redirect
operations. The stack will complain on missing skb tail room. Fix it
by using PAGE_SIZE when calling xdp_init_buff() for single buffer
programs.

Fixes: b231c3f3 ("bnxt: refactor bnxt_rx_xdp to separate xdp_init_buff/xdp_prepare_buff")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Address learning should initially be turned off by the driver for port
operation in standalone mode, then the DSA core handles changes to it
via ds->ops->port_bridge_flags().

Leaving address learning enabled while ports are standalone breaks any
kind of communication which involves port B receiving what port A has
sent. Notably it breaks the ksz9477 driver used with a (non offloaded,
ports act as if standalone) bonding interface in active-backup mode,
when the ports are connected together through external switches, for
redundancy purposes.

This fixes a major design flaw in the ksz9477 and ksz8795 drivers, which
unconditionally leave address learning enabled even while ports operate
as standalone.

Fixes: b987e98e ("dsa: add DSA switch driver for Microchip KSZ9477")
Link: https://lore.kernel.org/netdev/CAFZh4h-JVWt80CrQWkFji7tZJahMfOToUJQgKS5s0_=9zzpvYQ@mail.gmail.com/Reported-by: Brian Hutchinson <b.hutchman@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220818164809.3198039-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When a driver returns -EOPNOTSUPP in dsa_port_bridge_join() but failed
to provide a reason for it, DSA attempts to set the extack to say that
software fallback will kick in.

The problem is, when we use brctl and the legacy bridge ioctls, the
extack will be NULL, and DSA dereferences it in the process of setting
it.

Sergei Antonov proves this using the following stack trace:

Unable to handle kernel NULL pointer dereference at virtual address 00000000
PC is at dsa_slave_changeupper+0x5c/0x158

 dsa_slave_changeupper from raw_notifier_call_chain+0x38/0x6c
 raw_notifier_call_chain from __netdev_upper_dev_link+0x198/0x3b4
 __netdev_upper_dev_link from netdev_master_upper_dev_link+0x50/0x78
 netdev_master_upper_dev_link from br_add_if+0x430/0x7f4
 br_add_if from br_ioctl_stub+0x170/0x530
 br_ioctl_stub from br_ioctl_call+0x54/0x7c
 br_ioctl_call from dev_ifsioc+0x4e0/0x6bc
 dev_ifsioc from dev_ioctl+0x2f8/0x758
 dev_ioctl from sock_ioctl+0x5f0/0x674
 sock_ioctl from sys_ioctl+0x518/0xe40
 sys_ioctl from ret_fast_syscall+0x0/0x1c

Fix the problem by only overriding the extack if non-NULL.

Fixes: 1c6e8088 ("net: dsa: allow port_bridge_join() to override extack message")
Link: https://lore.kernel.org/netdev/CABikg9wx7vB5eRDAYtvAm7fprJ09Ta27a4ZazC=NX5K4wn6pWA@mail.gmail.com/Reported-by: Sergei Antonov <saproj@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Sergei Antonov <saproj@gmail.com>
Link: https://lore.kernel.org/r/20220819173925.3581871-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Looks to have been left out in an oversight.

Cc: Mahesh Bandewar <maheshb@google.com>
Cc: Sainath Grandhi <sainath.grandhi@intel.com>
Fixes: 235a9d89 ('ipvtap: IP-VLAN based tap driver')
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20220821130808.12143-1-zenczykowski@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Jonathan Toppins says:

====================
bonding: 802.3ad: fix no transmission of LACPDUs

Configuring a bond in a specific order can leave the bond in a state
where it never transmits LACPDUs.

The first patch adds some kselftest infrastructure and the reproducer
that demonstrates the problem. The second patch fixes the issue. The
new third patch makes ad_ticks_per_sec a static const and removes the
passing of this variable via the stack.
====================

Link: https://lore.kernel.org/r/cover.1660919940.git.jtoppins@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The value is only ever set once in bond_3ad_initialize and only ever
read otherwise. There seems to be no reason to set the variable via
bond_3ad_initialize when setting the global variable will do. Change
ad_ticks_per_sec to a const to enforce its read-only usage.
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This is caused by the global variable ad_ticks_per_sec being zero as
demonstrated by the reproducer script discussed below. This causes
all timer values in __ad_timer_to_ticks to be zero, resulting
in the periodic timer to never fire.

To reproduce:
Run the script in
`tools/testing/selftests/drivers/net/bonding/bond-break-lacpdu-tx.sh` which
puts bonding into a state where it never transmits LACPDUs.

line 44: ip link add fbond type bond mode 4 miimon 200 \
            xmit_hash_policy 1 ad_actor_sys_prio 65535 lacp_rate fast
setting bond param: ad_actor_sys_prio
given:
    params.ad_actor_system = 0
call stack:
    bond_option_ad_actor_sys_prio()
    -> bond_3ad_update_ad_actor_settings()
       -> set ad.system.sys_priority = bond->params.ad_actor_sys_prio
       -> ad.system.sys_mac_addr = bond->dev->dev_addr; because
            params.ad_actor_system == 0
results:
     ad.system.sys_mac_addr = bond->dev->dev_addr

line 48: ip link set fbond address 52:54:00:3B:7C:A6
setting bond MAC addr
call stack:
    bond->dev->dev_addr = new_mac

line 52: ip link set fbond type bond ad_actor_sys_prio 65535
setting bond param: ad_actor_sys_prio
given:
    params.ad_actor_system = 0
call stack:
    bond_option_ad_actor_sys_prio()
    -> bond_3ad_update_ad_actor_settings()
       -> set ad.system.sys_priority = bond->params.ad_actor_sys_prio
       -> ad.system.sys_mac_addr = bond->dev->dev_addr; because
            params.ad_actor_system == 0
results:
     ad.system.sys_mac_addr = bond->dev->dev_addr

line 60: ip link set veth1-bond down master fbond
given:
    params.ad_actor_system = 0
    params.mode = BOND_MODE_8023AD
    ad.system.sys_mac_addr == bond->dev->dev_addr
call stack:
    bond_enslave
    -> bond_3ad_initialize(); because first slave
       -> if ad.system.sys_mac_addr != bond->dev->dev_addr
          return
results:
     Nothing is run in bond_3ad_initialize() because dev_addr equals
     sys_mac_addr leaving the global ad_ticks_per_sec zero as it is
     never initialized anywhere else.

The if check around the contents of bond_3ad_initialize() is no longer
needed due to commit 5ee14e6d ("bonding: 3ad: apply ad_actor settings
changes immediately") which sets ad.system.sys_mac_addr if any one of
the bonding parameters whos set function calls
bond_3ad_update_ad_actor_settings(). This is because if
ad.system.sys_mac_addr is zero it will be set to the current bond mac
address, this causes the if check to never be true.

Fixes: 5ee14e6d ("bonding: 3ad: apply ad_actor settings changes immediately")
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This creates a test collection in drivers/net/bonding for bonding
specific kernel selftests.

The first test is a reproducer that provisions a bond and given the
specific order in how the ip-link(8) commands are issued the bond never
transmits an LACPDU frame on any of its slaves.
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Since priv->rx_mapping[i] is maped in moxart_mac_open(), we
should unmap it from moxart_mac_stop(). Fixes 2 warnings.

1. During error unwinding in moxart_mac_probe(): "goto init_fail;",
then moxart_mac_free_memory() calls dma_unmap_single() with
priv->rx_mapping[i] pointers zeroed.

WARNING: CPU: 0 PID: 1 at kernel/dma/debug.c:963 check_unmap+0x704/0x980
DMA-API: moxart-ethernet 92000000.mac: device driver tries to free DMA memory it has not allocated [device address=0x0000000000000000] [size=1600 bytes]
CPU: 0 PID: 1 Comm: swapper Not tainted 5.19.0+ #60
Hardware name: Generic DT based system
 unwind_backtrace from show_stack+0x10/0x14
 show_stack from dump_stack_lvl+0x34/0x44
 dump_stack_lvl from __warn+0xbc/0x1f0
 __warn from warn_slowpath_fmt+0x94/0xc8
 warn_slowpath_fmt from check_unmap+0x704/0x980
 check_unmap from debug_dma_unmap_page+0x8c/0x9c
 debug_dma_unmap_page from moxart_mac_free_memory+0x3c/0xa8
 moxart_mac_free_memory from moxart_mac_probe+0x190/0x218
 moxart_mac_probe from platform_probe+0x48/0x88
 platform_probe from really_probe+0xc0/0x2e4

2. After commands:
 ip link set dev eth0 down
 ip link set dev eth0 up

WARNING: CPU: 0 PID: 55 at kernel/dma/debug.c:570 add_dma_entry+0x204/0x2ec
DMA-API: moxart-ethernet 92000000.mac: cacheline tracking EEXIST, overlapping mappings aren't supported
CPU: 0 PID: 55 Comm: ip Not tainted 5.19.0+ #57
Hardware name: Generic DT based system
 unwind_backtrace from show_stack+0x10/0x14
 show_stack from dump_stack_lvl+0x34/0x44
 dump_stack_lvl from __warn+0xbc/0x1f0
 __warn from warn_slowpath_fmt+0x94/0xc8
 warn_slowpath_fmt from add_dma_entry+0x204/0x2ec
 add_dma_entry from dma_map_page_attrs+0x110/0x328
 dma_map_page_attrs from moxart_mac_open+0x134/0x320
 moxart_mac_open from __dev_open+0x11c/0x1ec
 __dev_open from __dev_change_flags+0x194/0x22c
 __dev_change_flags from dev_change_flags+0x14/0x44
 dev_change_flags from devinet_ioctl+0x6d4/0x93c
 devinet_ioctl from inet_ioctl+0x1ac/0x25c

v1 -> v2:
Extraneous change removed.

Fixes: 6c821bd9 ("net: Add MOXA ART SoCs ethernet driver")
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220819110519.1230877-1-saproj@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

For some MAC drivers, they set the mac_managed_pm to true in its
->ndo_open() callback. So before the mac_managed_pm is set to true,
we still want to leverage the mdio_bus_phy_suspend()/resume() for
the phy device suspend and resume. In this case, the phy device is
in PHY_READY, and we shouldn't warn about this. It also seems that
the check of mac_managed_pm in WARN_ON is redundant since we already
check this in the entry of mdio_bus_phy_resume(), so drop it.

Fixes: 744d23c7 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220819082451.1992102-1-xiaolei.wang@windriver.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>