All ->pre_destory() implementations return 0 now, which is the only
allowed return value.  Make it return void.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Vivek Goyal <vgoyal@redhat.com>

Now that pre_destroy callbacks are called from the context where neither
any task can attach the group nor any children group can be added there
is no other way to fail from hugetlb_pre_destroy.
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Glauber Costa <glommer@parallels.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

Now that pre_destroy callbacks are called from the context where neither
any task can attach the group nor any children group can be added there
is no other way to fail from mem_cgroup_pre_destroy.
mem_cgroup_pre_destroy doesn't have to take a reference to memcg's css
because all css' are marked dead already.

tj: Remove now unused local variable @cgrp from
    mem_cgroup_reparent_charges().
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Glauber Costa <glommer@parallels.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

CGRP_WAIT_ON_RMDIR is another kludge which was added to make cgroup
destruction rollback somewhat working.  cgroup_rmdir() used to drain
CSS references and CGRP_WAIT_ON_RMDIR and the associated waitqueue and
helpers were used to allow the task performing rmdir to wait for the
next relevant event.

Unfortunately, the wait is visible to controllers too and the
mechanism got exposed to memcg by 88703267 ("cgroup avoid permanent
sleep at rmdir").

Now that the draining and retries are gone, CGRP_WAIT_ON_RMDIR is
unnecessary.  Remove it and all the mechanisms supporting it.  Note
that memcontrol.c changes are essentially revert of 88703267
("cgroup avoid permanent sleep at rmdir").
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Balbir Singh <bsingharora@gmail.com>

Because ->pre_destroy() could fail and can't be called under
cgroup_mutex, cgroup destruction did something very ugly.

  1. Grab cgroup_mutex and verify it can be destroyed; fail otherwise.

  2. Release cgroup_mutex and call ->pre_destroy().

  3. Re-grab cgroup_mutex and verify it can still be destroyed; fail
     otherwise.

  4. Continue destroying.

In addition to being ugly, it has been always broken in various ways.
For example, memcg ->pre_destroy() expects the cgroup to be inactive
after it's done but tasks can be attached and detached between #2 and
#3 and the conditions that memcg verified in ->pre_destroy() might no
longer hold by the time control reaches #3.

Now that ->pre_destroy() is no longer allowed to fail.  We can switch
to the following.

  1. Grab cgroup_mutex and verify it can be destroyed; fail otherwise.

  2. Deactivate CSS's and mark the cgroup removed thus preventing any
     further operations which can invalidate the verification from #1.

  3. Release cgroup_mutex and call ->pre_destroy().

  4. Re-grab cgroup_mutex and continue destroying.

After this change, controllers can safely assume that ->pre_destroy()
will only be called only once for a given cgroup and, once
->pre_destroy() is called, the cgroup will stay dormant till it's
destroyed.

This removes the only reason ->pre_destroy() can fail - new task being
attached or child cgroup being created inbetween.  Error out path is
removed and ->pre_destroy() invocation is open coded in
cgroup_rmdir().

v2: cgroup_call_pre_destroy() removal moved to this patch per Michal.
    Commit message updated per Glauber.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Glauber Costa <glommer@parallels.com>

This patch makes cgroup_create() fail if @parent is marked removed.
This is to prepare for further updates to cgroup_rmdir() path.

Note that this change isn't strictly necessary.  cgroup can only be
created via mkdir and the removed marking and dentry removal happen
without releasing cgroup_mutex, so cgroup_create() can never race with
cgroup_rmdir().  Even after the scheduled updates to cgroup_rmdir(),
cgroup_mkdir() and cgroup_rmdir() are synchronized by i_mutex
rendering the added liveliness check unnecessary.

Do it anyway such that locking is contained inside cgroup proper and
we don't get nasty surprises if we ever grow another caller of
cgroup_create().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Li Zefan <lizefan@huawei.com>

CSS_REMOVED is one of the several contortions which were necessary to
support css reference draining on cgroup removal.  All css->refcnts
which need draining should be deactivated and verified to equal zero
atomically w.r.t. css_tryget().  If any one isn't zero, all refcnts
needed to be re-activated and css_tryget() shouldn't fail in the
process.

This was achieved by letting css_tryget() busy-loop until either the
refcnt is reactivated (failed removal attempt) or CSS_REMOVED is set
(committing to removal).

Now that css refcnt draining is no longer used, there's no need for
atomic rollback mechanism.  css_tryget() simply can look at the
reference count and fail if it's deactivated - it's never getting
re-activated.

This patch removes CSS_REMOVED and updates __css_tryget() to fail if
the refcnt is deactivated.  As deactivation and removal are a single
step now, they no longer need to be protected against css_tryget()
happening from irq context.  Remove local_irq_disable/enable() from
cgroup_rmdir().

Note that this removes css_is_removed() whose only user is VM_BUG_ON()
in memcontrol.c.  We can replace it with a check on the refcnt but
given that the only use case is a debug assert, I think it's better to
simply unexport it.

v2: Comment updated and explanation on local_irq_disable/enable()
    added per Michal Hocko.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>

2ef37d3f ("memcg: Simplify mem_cgroup_force_empty_list error
handling") removed the last user of __DEPRECATED_clear_css_refs.  This
patch removes __DEPRECATED_clear_css_refs and mechanisms to support
it.

* Conditionals dependent on __DEPRECATED_clear_css_refs removed.

* cgroup_clear_css_refs() can no longer fail.  All that needs to be
  done are deactivating refcnts, setting CSS_REMOVED and putting the
  base reference on each css.  Remove cgroup_clear_css_refs() and the
  failure path, and open-code the loops into cgroup_rmdir().

This patch keeps the two for_each_subsys() loops separate while open
coding them.  They can be merged now but there are scheduled changes
which need them to be separate, so keep them separate to reduce the
amount of churn.

local_irq_save/restore() from cgroup_clear_css_refs() are replaced
with local_irq_disable/enable() for simplicity.  This is safe as
cgroup_rmdir() is always called with IRQ enabled.  Note that this IRQ
switching is necessary to ensure that css_tryget() isn't called from
IRQ context on the same CPU while lower context is between CSS
deactivation and setting CSS_REMOVED as css_tryget() would hang
forever in such cases waiting for CSS to be re-activated or
CSS_REMOVED set.  This will go away soon.

v2: cgroup_call_pre_destroy() removal dropped per Michal.  Commit
    message updated to explain local_irq_disable/enable() conversion.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Li Zefan <lizefan@huawei.com>

mem_cgroup_force_empty_list currently tries to remove all pages from
the given LRU. To prevent from temoporary failures (EBUSY returned by
mem_cgroup_move_parent) it uses a margin to the current LRU pages and
returns the true if there are still some pages left on the list.

If we consider that mem_cgroup_move_parent fails only when it is racing
with somebody else removing (uncharging) the page or when the page is
migrated then it is obvious that all those failures are only temporal
and so we can safely retry later.
Let's get rid of the safety margin and make the loop really wait for
the empty LRU. The caller should still make sure that all charges have
been removed from the res_counter because mem_cgroup_replace_page_cache
might add a page to the LRU after the list_empty check (it doesn't touch
res_counter though).
This catches most of the cases except for shmem which might call
mem_cgroup_replace_page_cache with a page which is not charged and on
the LRU yet but this was the case also without this patch. In order to
fix this we need a guarantee that try_get_mem_cgroup_from_page falls
back to the current mm's cgroup so it needs css_tryget to fail. This
will be fixed up in a later patch because it needs a help from cgroup
core (pre_destroy has to be called after css is cleared).

Although mem_cgroup_pre_destroy can still fail (if a new task or a new
sub-group appears) there is no reason to retry pre_destroy callback from
the cgroup core. This means that __DEPRECATED_clear_css_refs has lost
its meaning and it can be removed.

Changes since v2
- remove __DEPRECATED_clear_css_refs

Changes since v1
- use kerndoc
- be more specific about mem_cgroup_move_parent possible failures
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Glauber Costa <glommer@parallels.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

The root cgroup cannot be destroyed so we never hit it down the
mem_cgroup_pre_destroy path and mem_cgroup_force_empty_write shouldn't
even try to do anything if called for the root.

This means that mem_cgroup_move_parent doesn't have to bother with the
root cgroup and it can assume it can always move charges upwards.
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Glauber Costa <glommer@parallels.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

mem_cgroup_force_empty did two separate things depending on free_all
parameter from the very beginning. It either reclaimed as many pages as
possible and moved the rest to the parent or just moved charges to the
parent. The first variant is used as memory.force_empty callback while
the later is used from the mem_cgroup_pre_destroy.

The whole games around gotos are far from being nice and there is no
reason to keep those two functions inside one. Let's split them and
also move the responsibility for css reference counting to their callers
to make to code easier.

This patch doesn't have any functional changes.
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Glauber Costa <glommer@parallels.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

IBM reported a deadlock in select_parent().  This was found to be caused
by taking rename_lock when already locked when restarting the tree
traversal.

There are two cases when the traversal needs to be restarted:

 1) concurrent d_move(); this can only happen when not already locked,
    since taking rename_lock protects against concurrent d_move().

 2) racing with final d_put() on child just at the moment of ascending
    to parent; rename_lock doesn't protect against this rare race, so it
    can happen when already locked.

Because of case 2, we need to be able to handle restarting the traversal
when rename_lock is already held.  This patch fixes all three callers of
try_to_ascend().

IBM reported that the deadlock is gone with this patch.

[ I rewrote the patch to be smaller and just do the "goto again" if the
  lock was already held, but credit goes to Miklos for the real work.
   - Linus ]
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull IOMMU fixes from Joerg Roedel:
 "Two small patches:

	* One patch to fix the function declarations for
	  !CONFIG_IOMMU_API. This is causing build errors
	  in linux-next and should be fixed for v3.6.

	* Another patch to fix an IOMMU group related NULL pointer
	  dereference."

* tag 'iommu-fixes-v3.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/amd: Fix wrong assumption in iommu-group specific code
  iommu: static inline iommu group stub functions

Pull NVMe driver fixes from Matthew Wilcox:
 "Now that actual hardware has been released (don't have any yet
  myself), people are starting to want some of these fixes merged."

Willy doesn't have hardware? Guys...

* git://git.infradead.org/users/willy/linux-nvme:
  NVMe: Cancel outstanding IOs on queue deletion
  NVMe: Free admin queue memory on initialisation failure
  NVMe: Use ida for nvme device instance
  NVMe: Fix whitespace damage in nvme_init
  NVMe: handle allocation failure in nvme_map_user_pages()
  NVMe: Fix uninitialized iod compiler warning
  NVMe: Do not set IO queue depth beyond device max
  NVMe: Set block queue max sectors
  NVMe: use namespace id for nvme_get_features
  NVMe: replace nvme_ns with nvme_dev for user admin
  NVMe: Fix nvme module init when nvme_major is set
  NVMe: Set request queue logical block size

Sasha Levin has been running trinity in a KVM tools guest, and was able
to trigger the BUG_ON() at arch/x86/mm/pat.c:279 (verifying the range of
the memory type).  The call trace showed that it was mtdchar_mmap() that
created an invalid remap_pfn_range().

The problem is that mtdchar_mmap() does various really odd and subtle
things with the vma page offset etc, and uses the wrong types (and the
wrong overflow) detection for it.

For example, the page offset may well be 32-bit on a 32-bit
architecture, but after shifting it up by PAGE_SHIFT, we need to use a
potentially 64-bit resource_size_t to correctly hold the full value.

Also, we need to check that the vma length plus offset doesn't overflow
before we check that it is smaller than the length of the mtdmap region.

This fixes things up and tries to make the code a bit easier to read.
Reported-and-tested-by: Sasha Levin <levinsasha928@gmail.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Acked-by: Artem Bityutskiy <dedekind1@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking fixes from David S Miller:

 1) Netfilter xt_limit module can use uninitialized rules, from Jan
    Engelhardt.

 2) Wei Yongjun has found several more spots where error pointers were
    treated as NULL/non-NULL and vice versa.

 3) bnx2x was converted to pci_io{,un}map() but one remaining plain
    iounmap() got missed.  From Neil Horman.

 4) Due to a fence-post type error in initialization of inetpeer entries
    (which is where we store the ICMP rate limiting information), we can
    erroneously drop ICMPs if the inetpeer was created right around when
    jiffies wraps.

    Fix from Nicolas Dichtel.

 5) smsc75xx resume fix from Steve Glendinnig.

 6) LAN87xx smsc chips need an explicit hardware init, from Marek Vasut.

 7) qlcnic uses msleep() with locks held, fix from Narendra K.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  netdev: octeon: fix return value check in octeon_mgmt_init_phy()
  inetpeer: fix token initialization
  qlcnic: Fix scheduling while atomic bug
  bnx2: Clean up remaining iounmap
  net: phy: smsc: Implement PHY config_init for LAN87xx
  smsc75xx: fix resume after device reset
  netdev: pasemi: fix return value check in pasemi_mac_phy_init()
  team: fix return value check
  l2tp: fix return value check
  netfilter: xt_limit: have r->cost != 0 case work

Pull vfs fixes from Al Viro:
 "A couple of fixes; one for automount/lazy umount race, another a
  classic "we don't protect the refcount transition to zero with the
  lock that protects looking for object in hash" kind of crap in lockd."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  close the race in nlmsvc_free_block()
  do_add_mount()/umount -l races

Pull UML fixes from Richard Weinberger.

* 'for-linus-3.6-rc-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: Preinclude include/linux/kern_levels.h
  um: Fix IPC on um
  um: kill thread->forking
  um: let signal_delivered() do SIGTRAP on singlestepping into handler
  um: don't leak floating point state and segment registers on execve()
  um: take cleaning singlestep to start_thread()

Pull dm fixes from Alasdair G Kergon:
 "A few fixes for problems discovered during the 3.6 cycle.

  Of particular note, are fixes to the thin target's discard support,
  which I hope is finally working correctly; and fixes for multipath
  ioctls and device limits when there are no paths."

* tag 'dm-3.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm:
  dm verity: fix overflow check
  dm thin: fix discard support for data devices
  dm thin: tidy discard support
  dm: retain table limits when swapping to new table with no devices
  dm table: clear add_random unless all devices have it set
  dm: handle requests beyond end of device instead of using BUG_ON
  dm mpath: only retry ioctl when no paths if queue_if_no_path set
  dm thin: do not set discard_zeroes_data

Speculative cache pagecache lookups can elevate the refcount from
under us, so avoid the false positive. If the refcount is < 2 we'll be
notified by a VM_BUG_ON in put_page_testzero as there are two
put_page(src_page) in a row before returning from this function.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Petr Holasek <pholasek@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The new IOMMU groups code in the AMD IOMMU driver makes the
assumption that there is a pci_dev struct available for all
device-ids listed in the IVRS ACPI table. Unfortunatly this
assumption is not true and so this code causes a NULL
pointer dereference at boot on some systems.

Fix it by making sure the given pointer is never NULL when
passed to the group specific code. The real fix is larger
and will be queued for v3.7.
Reported-by: Florian Dazinger <florian@dazinger.net>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

In case of error, the function of_phy_connect() returns NULL
pointer not ERR_PTR(). The IS_ERR() test in the return value
check should be replaced with NULL test.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull drm fixes from Dave Airlie:
 "The three nouveau fixes quiten unneeded dmesg spam that people are
   seeing and pondering,

  The udl fix stops it from trying to driver monitors that are too big,
  where we get a black screen.

  And a vmware memory alloc problem."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/nvc0/fifo: ignore bits in PFIFO_INTR that aren't set in PFIFO_INTR_EN
  drm/udl: limit modes to the sku pixel limits.
  vmwgfx: corruption in vmw_event_fence_action_create()
  drm/nvc0/ltcg: mask off intr 0x10
  drm/nouveau: silence a debug message triggered by newer userspace

Pull USB fixes from Greg Kroah-Hartman:
 "Here are two USB bugfixes for your 3.6-rc7 tree.

  The OHCI fix has been reported a number of times and is a regression
  from 3.5, and the patch that causes the regression was on the way to
  the -stable trees before I was reminded (again) that this fix needed
  to get to your tree soon.

  The host controller bugfix was reported in older kernels as being
  pretty easy to trigger, and has been tested by Red Hat and their
  customers.

  Both have been in the usb-next branch in the -next tree for a while
  now, I just cherry-picked them out to get to you in time for the 3.6
  release.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'usb-3.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: Fix race condition when removing host controllers
  USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq

Also fix the calls to next_packet_size() for the pause case. This was
missed in 245baf98 ("ALSA: snd-usb: fix calls to next_packet_size").
Signed-off-by: Daniel Mack <zonque@gmail.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reported-and-tested-by: Christian Tefzer <ctrefzer@gmx.de>
Cc: stable@kernel.org
[ Taking directly because Takashi is on vacation  - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ASoC update from Mark Brown:
 "One small and obvious driver-specific fix.

  Takashi is on vacation now so he asked me to send directly, it's a
  pretty bad bug with low regression risk."

* tag 'asoc-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound:
  ASoC: wm2000: Correct register size

When jiffies wraps around (for example, 5 minutes after the boot, see
INITIAL_JIFFIES) and peer has just been created, now - peer->rate_last can be
< XRLIM_BURST_FACTOR * timeout, so token is not set to the maximum value, thus
some icmp packets can be unexpectedly dropped.

Fix this case by initializing last_rate to 60 seconds in the past.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the device close path, 'qlcnic_fw_destroy_ctx' and
'qlcnic_poll_rsp' call msleep. But  'qlcnic_fw_destroy_ctx' and
'qlcnic_poll_rsp' are called with 'adapter->tx_clean_lock' spin lock
held resulting in scheduling while atomic bug causing the following
trace.

I observed that the commit 012dc19a
from John Fastabend addresses a similar issue in ixgbevf driver.
Adopting the same approach used in the commit, this patch uses mdelay
to address the issue.

[79884.999115] BUG: scheduling while atomic: ip/30846/0x00000002
[79885.005562] INFO: lockdep is turned off.
[79885.009958] Modules linked in: qlcnic fuse nf_conntrack_netbios_ns nf_conntrack_broadcast ipt_MASQUERADE bnep bluetooth rfkill ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables iptable_nat nf_nat iptable_mangle ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack iptable_filter ip_tables dcdbas coretemp kvm_intel kvm iTCO_wdt ixgbe iTCO_vendor_support crc32c_intel ghash_clmulni_intel nfsd microcode sb_edac pcspkr edac_core dca bnx2x shpchp auth_rpcgss nfs_acl lpc_ich mfd_core mdio lockd libcrc32c wmi acpi_pad acpi_power_meter sunrpc uinput sd_mod sr_mod cdrom crc_t10dif ahci libahci libata megaraid_sas usb_storage dm_mirror dm_region_hash dm_log dm_mod [last unloaded: qlcnic]
[79885.083608] Pid: 30846, comm: ip Tainted: G        W  O 3.6.0-rc7+ #1
[79885.090805] Call Trace:
[79885.093569]  [<ffffffff816764d8>] __schedule_bug+0x68/0x76
[79885.099699]  [<ffffffff8168358e>] __schedule+0x99e/0xa00
[79885.105634]  [<ffffffff81683929>] schedule+0x29/0x70
[79885.111186]  [<ffffffff81680def>] schedule_timeout+0x16f/0x350
[79885.117724]  [<ffffffff811afb7a>] ? init_object+0x4a/0x90
[79885.123770]  [<ffffffff8107c190>] ? __internal_add_timer+0x140/0x140
[79885.130873]  [<ffffffff81680fee>] schedule_timeout_uninterruptible+0x1e/0x20
[79885.138773]  [<ffffffff8107e830>] msleep+0x20/0x30
[79885.144159]  [<ffffffffa04c7fbf>] qlcnic_issue_cmd+0xef/0x290 [qlcnic]
[79885.151478]  [<ffffffffa04c8265>] qlcnic_fw_cmd_destroy_rx_ctx+0x55/0x90 [qlcnic]
[79885.159868]  [<ffffffffa04c92fd>] qlcnic_fw_destroy_ctx+0x2d/0xa0 [qlcnic]
[79885.167576]  [<ffffffffa04bf2ed>] __qlcnic_down+0x11d/0x180 [qlcnic]
[79885.174708]  [<ffffffffa04bf6f8>] qlcnic_close+0x18/0x20 [qlcnic]
[79885.181547]  [<ffffffff8153b4c5>] __dev_close_many+0x95/0xe0
[79885.187899]  [<ffffffff8153b548>] __dev_close+0x38/0x50
[79885.193761]  [<ffffffff81545101>] __dev_change_flags+0xa1/0x180
[79885.200419]  [<ffffffff81545298>] dev_change_flags+0x28/0x70
[79885.206779]  [<ffffffff815531b8>] do_setlink+0x378/0xa00
[79885.212731]  [<ffffffff81354fe1>] ? nla_parse+0x31/0xe0
[79885.218612]  [<ffffffff815558ee>] rtnl_newlink+0x37e/0x560
[79885.224768]  [<ffffffff812cfa19>] ? selinux_capable+0x39/0x50
[79885.231217]  [<ffffffff812cbf98>] ? security_capable+0x18/0x20
[79885.237765]  [<ffffffff81555114>] rtnetlink_rcv_msg+0x114/0x2f0
[79885.244412]  [<ffffffff81551f87>] ? rtnl_lock+0x17/0x20
[79885.250280]  [<ffffffff81551f87>] ? rtnl_lock+0x17/0x20
[79885.256148]  [<ffffffff81555000>] ? __rtnl_unlock+0x20/0x20
[79885.262413]  [<ffffffff81570fc1>] netlink_rcv_skb+0xa1/0xb0
[79885.268661]  [<ffffffff81551fb5>] rtnetlink_rcv+0x25/0x40
[79885.274727]  [<ffffffff815708bd>] netlink_unicast+0x19d/0x220
[79885.281146]  [<ffffffff81570c45>] netlink_sendmsg+0x305/0x3f0
[79885.287595]  [<ffffffff8152b188>] ? sock_update_classid+0x148/0x2e0
[79885.294650]  [<ffffffff81525c2c>] sock_sendmsg+0xbc/0xf0
[79885.300600]  [<ffffffff8152600c>] __sys_sendmsg+0x3ac/0x3c0
[79885.306853]  [<ffffffff8109be23>] ? up_read+0x23/0x40
[79885.312510]  [<ffffffff816896cc>] ? do_page_fault+0x2bc/0x570
[79885.318968]  [<ffffffff81191854>] ? sys_brk+0x44/0x150
[79885.324715]  [<ffffffff811c458c>] ? fget_light+0x24c/0x520
[79885.330875]  [<ffffffff815286f9>] sys_sendmsg+0x49/0x90
[79885.336707]  [<ffffffff8168e429>] system_call_fastpath+0x16/0x1b
Signed-off-by: Narendra K <narendra_k@dell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit c0357e97 modified bnx2 to switch from
using ioremap/iounmap to pci_iomap/pci_iounmap.  They missed a spot in the error
path of bnx2_init_one though.  This patch just cleans that up.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Michael Chan <mcan@broadcom.com>
CC: "David S. Miller" <davem@davemloft.net>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull one more arm-soc bugfix from Olof Johansson:
 "Here's a bugfix for orion5x.  Without this, PCI doesn't initialize
  properly because of too small coherent pool to cover the allocations
  needed.

  A similar fix has already been done on kirkwood."

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: Orion5x: Fix too small coherent pool.

Pull ARM dma-mapping fix from Marek Szyprowski:
 "This patch fixes a potential memory leak in the ARM dma-mapping code."

* 'fixes-for-3.6' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  ARM: dma-mapping: Fix potential memory leak in atomic_pool_init()

Pull GPIO fix from Linus Walleij:
 "A late GPIO fix: Roland Stigge found a problem in the LPC32xx driver
  where a callback ignores one of its arguments.  It needs to go into
  stable too so sending this upstream immediately."

* tag 'gpio-fixes-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio-lpc32xx: Fix value handling of gpio_direction_output()

Pull two md bugfixes from NeilBrown:
 "One (missing spinlock init) was only introduced recently.  The other
  has been present as long as raid10 has been supported, so is tagged
  for -stable."

* tag 'md-3.6-fixes' of git://neil.brown.name/md:
  md/raid10: fix "enough" function for detecting if array is failed.
  md/raid5: add missing spin_lock_init.

Pull EDAC fixes from Mauro Carvalho Chehab:
 "Three edac fixes at the memory enumeration logic:
        - i3200_edac: Fixes a regression at the memory rank size, when the
                memorias are dual-rank;
        - i5000_edac: Fix a longstanding bug when calculating the memory
                size: before Kernel 3.6, the memory size were right only
                with one specific configuration;
        - sb_edac: Fixes a bug since the initial release of the driver:
                with 16GB DIMMs, there's an overflow at the memory size,
                causing the number of pages per dimm (an unsigned value)
                to have the highest bit equal to 1, effectively mangling
                the memory size.

  The third bug can potentially affect the error decoding logic as well."

* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac:
  sb_edac: Avoid overflow errors at memory size calculation
  i5000: Fix the memory size calculation with 2R memories
  i3200_edac: Fix memory rank size

"Search list for X" sounds like you're trying to find X on a list.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The LAN8710/LAN8720 chips do have broken the "FlexPWR" smart power-saving
capability. Enabling it leads to the PHY not being able to detect Link when
cold-started without cable connected. Thus, make sure this is disabled.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Christian Hohnstaedt <chohnstaedt@innominate.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: David S. Miller <davem@davemloft.net>

On some systems this device fails to properly resume after suspend,
this patch fixes it by running the usbnet_resume handler.

I suspect this also fixes this bug:

http://code.google.com/p/chromium-os/issues/detail?id=31871Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

The userspace part of UML uses the asm-offsets.h generator mechanism to
create definitions for UM_KERN_<LEVEL> that match the in-kernel
KERN_<LEVEL> constant definitions.

As of commit 04d2c8c8 ("printk: convert
the format for KERN_<LEVEL> to a 2 byte pattern"), KERN_<LEVEL> is no
longer expanded to the literal '"<LEVEL>"', but to '"\001" "LEVEL"', i.e.
it contains two parts.

However, the combo of DEFINE_STR() in
arch/x86/um/shared/sysdep/kernel-offsets.h and sed-y in Kbuild doesn't
support string literals consisting of multiple parts. Hence for all
UM_KERN_<LEVEL> definitions, only the SOH character is retained in the actual
definition, while the remainder ends up in the comment. E.g. in
include/generated/asm-offsets.h we get

    #define UM_KERN_INFO "\001" /* "6" KERN_INFO */

instead of

    #define UM_KERN_INFO "\001" "6" /* KERN_INFO */

This causes spurious '^A' output in some kernel messages:

    Calibrating delay loop... 4640.76 BogoMIPS (lpj=23203840)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 256
    ^AChecking that host ptys support output SIGIO...Yes
    ^AChecking that host ptys support SIGIO on close...No, enabling workaround
    ^AUsing 2.6 host AIO
    NET: Registered protocol family 16
    bio: create slab <bio-0> at 0
    Switching to clocksource itimer

To fix this:
  - Move the mapping from UM_KERN_<LEVEL> to KERN_<LEVEL> from
    arch/um/include/shared/common-offsets.h to
    arch/um/include/shared/user.h, which is preincluded for all userspace
    parts,
  - Preinclude include/linux/kern_levels.h for all userspace parts, to
    obtain the in-kernel KERN_<LEVEL> constant definitions. This doesn't
    violate the kernel/userspace separation, as include/linux/kern_levels.h
    is self-contained and doesn't expose any other kernel internals.
  - Remove the now unused STR() and DEFINE_STR() macros.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Richard Weinberger <richard@nod.at>

commit c1d7e01d (ipc: use Kconfig options for __ARCH_WANT_[COMPAT_]IPC_PARSE_VERSION)
forgot UML and broke IPC on it.
Also UML has to select ARCH_WANT_IPC_PARSE_VERSION usin Kconfig.

Reported-and-tested-by: <Toralf Förster toralf.foerster@gmx.de>
Signed-off-by: Richard Weinberger <richard@nod.at>