- 03 May, 2021 11 commits
-
-
Daniele Palmas authored
Add documentation for /sys/class/net/<iface>/qmi/pass_through Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Xie He authored
This reverts commit 1b479fb8 ("drivers/net/wan/hdlc_fr: Fix a double free in pvc_xmit"). 1. This commit is incorrect. "__skb_pad" will NOT free the skb on failure when its "free_on_error" parameter is "false". 2. This commit claims to fix my commit. But it didn't CC me?? Fixes: 1b479fb8 ("drivers/net/wan/hdlc_fr: Fix a double free in pvc_xmit") Cc: Lv Yunlong <lyl2019@mail.ustc.edu.cn> Signed-off-by:
Xie He <xie.he.0141@gmail.com> Signed-off-by:
-
David S. Miller authored
Xin Long says: ==================== sctp: fix the race condition in sctp_destroy_sock in a proper way The original fix introduced a dead lock, and has to be removed in Patch 1/2, and we will get a proper way to fix it in Patch 2/2. ==================== Signed-off-by: -
Xin Long authored
As Or Cohen described: If sctp_destroy_sock is called without sock_net(sk)->sctp.addr_wq_lock held and sp->do_auto_asconf is true, then an element is removed from the auto_asconf_splist without any proper locking. This can happen in the following functions: 1. In sctp_accept, if sctp_sock_migrate fails. 2. In inet_create or inet6_create, if there is a bpf program attached to BPF_CGROUP_INET_SOCK_CREATE which denies creation of the sctp socket. This patch is to fix it by moving the auto_asconf init out of sctp_init_sock(), by which inet_create()/inet6_create() won't need to operate it in sctp_destroy_sock() when calling sk_common_release(). It also makes more sense to do auto_asconf init while binding the first addr, as auto_asconf actually requires an ANY addr bind, see it in sctp_addr_wq_timeout_handler(). This addresses CVE-2021-23133. Fixes: 61023658 ("bpf: Add new cgroup attach type to enable sock modifications") Reported-by:Or Cohen <orcohen@paloaltonetworks.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Xin Long authored
This reverts commit b166a20b. This one has to be reverted as it introduced a dead lock, as syzbot reported: CPU0 CPU1 ---- ---- lock(&net->sctp.addr_wq_lock); lock(slock-AF_INET6); lock(&net->sctp.addr_wq_lock); lock(slock-AF_INET6); CPU0 is the thread of sctp_addr_wq_timeout_handler(), and CPU1 is that of sctp_close(). The original issue this commit fixed will be fixed in the next patch. Reported-by: syzbot+959223586843e69a2674@syzkaller.appspotmail.com Signed-off-by:
-
Phillip Potter authored
Check at start of fill_frame_info that the MAC header in the supplied skb is large enough to fit a struct hsr_ethhdr, as otherwise this is not a valid HSR frame. If it is too small, return an error which will then cause the callers to clean up the skb. Fixes a KMSAN-found uninit-value bug reported by syzbot at: https://syzkaller.appspot.com/bug?id=f7e9b601f1414f814f7602a82b6619a8d80bce3f Reported-by: syzbot+e267bed19bfc5478fb33@syzkaller.appspotmail.com Signed-off-by:
Phillip Potter <phil@philpotter.co.uk> Signed-off-by:
-
Xin Long authored
Normally SCTP_MIB_CURRESTAB is always incremented once asoc enter into ESTABLISHED from the state < ESTABLISHED and decremented when the asoc is being deleted. However, in sctp_sf_do_dupcook_b(), the asoc's state can be changed to ESTABLISHED from the state >= ESTABLISHED where it shouldn't increment SCTP_MIB_CURRESTAB. Otherwise, one asoc may increment MIB_CURRESTAB multiple times but only decrement once at the end. I was able to reproduce it by using scapy to do the 4-way shakehands, after that I replayed the COOKIE-ECHO chunk with 'peer_vtag' field changed to different values, and SCTP_MIB_CURRESTAB was incremented multiple times and never went back to 0 even when the asoc was freed. This patch is to fix it by only incrementing SCTP_MIB_CURRESTAB when the state < ESTABLISHED in sctp_sf_do_dupcook_b(). Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
David S. Miller authored
Xin Long says: ==================== sctp: fix the incorrect revert commit 35b4f244 ("sctp: do asoc update earlier in sctp_sf_do_dupcook_a") only keeps the SHUTDOWN and COOKIE-ACK with the same asoc, not transport. So instead of revert commit 145cb2f7 ("sctp: Fix bundling of SHUTDOWN with COOKIE-ACK"), we should revert 12dfd78e ("sctp: Fix SHUTDOWN CTSN Ack in the peer restart case"). ==================== Signed-off-by:
-
Xin Long authored
This reverts commit 12dfd78e. This can be reverted as shutdown and cookie_ack chunk are using the same asoc since commit 35b4f244 ("sctp: do asoc update earlier in sctp_sf_do_dupcook_a"). Reported-by:
Jere Leppänen <jere.leppanen@nokia.com> Signed-off-by:
-
Xin Long authored
This reverts commit 7e9269a5. As Jere notice, commit 35b4f244 ("sctp: do asoc update earlier in sctp_sf_do_dupcook_a") only keeps the SHUTDOWN and COOKIE-ACK with the same asoc, not transport. So we have to bring this patch back. Reported-by:
-
Lv Yunlong authored
In enic_hard_start_xmit, it calls enic_queue_wq_skb(). Inside enic_queue_wq_skb, if some error happens, the skb will be freed by dev_kfree_skb(skb). But the freed skb is still used in skb_tx_timestamp(skb). My patch makes enic_queue_wq_skb() return error and goto spin_unlock() incase of error. The solution is provided by Govind. See https://lkml.org/lkml/2021/4/30/961. Fixes: fb7516d4 ("enic: add sw timestamp support") Signed-off-by:
Lv Yunlong <lyl2019@mail.ustc.edu.cn> Acked-by:
Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by:
-
- 30 Apr, 2021 15 commits
-
-
Wan Jiabing authored
In commit f4da5652 ("net: stmmac: Add support for external trigger timestamping"), struct stmmac_priv was declared at line 507 which caused duplicate struct declarations. Remove later duplicate declaration here. Signed-off-by:
Wan Jiabing <wanjiabing@vivo.com> Reviewed-by:
Wong Vee Khee <vee.khee.wong@linux.intel.com> Signed-off-by:
-
Maxim Kochetkov authored
A number of PHYs support the PHY tunable to set and get downshift. However, only 88E1116R enables downshift by default. Extend this default enabled to all the PHYs that support the downshift tunable. Signed-off-by:
Maxim Kochetkov <fido_max@inbox.ru> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David S. Miller authored
Xin Long says: ==================== sctp: always send a chunk with the asoc that it belongs to Currently when processing a duplicate COOKIE-ECHO chunk, a new temp asoc would be created, then it creates the chunks with the new asoc. However, later on it uses the old asoc to send these chunks, which has caused quite a few issues. This patchset is to fix this and make sure that the COOKIE-ACK and SHUTDOWN chunks are created with the same asoc that will be used to send them out. v1->v2: - see Patch 3/3. ==================== Acked-by:
-
Xin Long authored
The same thing should be done for sctp_sf_do_dupcook_b(). Meanwhile, SCTP_CMD_UPDATE_ASSOC cmd can be removed. v1->v2: - Fix the return value in sctp_sf_do_assoc_update(). Signed-off-by:
-
Xin Long authored
This can be reverted as shutdown and cookie_ack chunk are using the same asoc since the last patch. This reverts commit 145cb2f7. Signed-off-by:
-
Xin Long authored
There's a panic that occurs in a few of envs, the call trace is as below: [] general protection fault, ... 0x29acd70f1000a: 0000 [#1] SMP PTI [] RIP: 0010:sctp_ulpevent_notify_peer_addr_change+0x4b/0x1fa [sctp] [] sctp_assoc_control_transport+0x1b9/0x210 [sctp] [] sctp_do_8_2_transport_strike.isra.16+0x15c/0x220 [sctp] [] sctp_cmd_interpreter.isra.21+0x1231/0x1a10 [sctp] [] sctp_do_sm+0xc3/0x2a0 [sctp] [] sctp_generate_timeout_event+0x81/0xf0 [sctp] This is caused by a transport use-after-free issue. When processing a duplicate COOKIE-ECHO chunk in sctp_sf_do_dupcook_a(), both COOKIE-ACK and SHUTDOWN chunks are allocated with the transort from the new asoc. However, later in the sideeffect machine, the old asoc is used to send them out and old asoc's shutdown_last_sent_to is set to the transport that SHUTDOWN chunk attached to in sctp_cmd_setup_t2(), which actually belongs to the new asoc. After the new_asoc is freed and the old asoc T2 timeout, the old asoc's shutdown_last_sent_to that is already freed would be accessed in sctp_sf_t2_timer_expire(). Thanks Alexander and Jere for helping dig into this issue. To fix it, this patch is to do the asoc update first, then allocate the COOKIE-ACK and SHUTDOWN chunks with the 'updated' old asoc. This would make more sense, as a chunk from an asoc shouldn't be sent out with another asoc. We had fixed quite a few issues caused by this. Fixes: 145cb2f7 ("sctp: Fix bundling of SHUTDOWN with COOKIE-ACK") Reported-by:
Alexander Sverdlin <alexander.sverdlin@nokia.com> Reported-by: syzbot+bbe538efd1046586f587@syzkaller.appspotmail.com Reported-by:
Michal Tesar <mtesar@redhat.com> Signed-off-by:
-
Marc Dionne authored
Add Marc Dionne as a co-maintainer for kafs and rxrpc. Signed-off-by:
Marc Dionne <marc.dionne@auristor.com> Signed-off-by:
-
Johannes Berg authored
Remove it from the MODULE_AUTHOR statements referencing it. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Yang Li authored
Variable 'err' is set to zero but this value is never read as it is overwritten with a new value later on, hence it is a redundant assignment and can be removed. Clean up the following clang-analyzer warning: net/vmw_vsock/vmci_transport.c:948:2: warning: Value stored to 'err' is never read [clang-analyzer-deadcode.DeadStores] Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Signed-off-by:
-
David S. Miller authored
Huazhong Tan says: ==================== net: hns3: fixes for -net This series adds some bugfixes for the HNS3 ethernet driver. ==================== Signed-off-by: -
Yufeng Mo authored
If selftest and reset are performed at the same time, the phy loopback setting may be still in enable state after the reset, and device cannot link up. So fix this issue by disabling phy loopback before phy_start(). Fixes: 256727da ("net: hns3: Add MDIO support to HNS3 Ethernet driver for hip08 SoC") Signed-off-by:
Yufeng Mo <moyufeng@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
Yufeng Mo authored
HW error and global reset are reported through MSIX interrupts. The same error may be reported to different functions at the same time. When global reset begins, the pending reset request set by this error is unnecessary. So clear the pending reset request after the reset is complete to avoid the repeated reset. Fixes: f6162d44 ("net: hns3: add handling of hw errors reported through MSIX") Signed-off-by:
-
Peng Li authored
Currently, netif_tx_stop_all_queues() is used to ensure that the xmit is not running, but for the concurrent case it will not take effect, since netif_tx_stop_all_queues() just sets a flag without locking to indicate that the xmit queue(s) should not be run. So use netif_tx_disable() to replace netif_tx_stop_all_queues(), it takes the xmit queue lock while marking the queue stopped. Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
-
Hao Chen authored
When skb->ip_summed is CHECKSUM_PARTIAL, for non-tunnel udp packet, which has a dest port as the IANA assigned, the hardware is expected to do the checksum offload, but the hardware whose version is below V3 will not do the checksum offload when udp dest port is 4790. So fixes it by doing the checksum in software for this case. Fixes: 76ad4f0e ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by:
Hao Chen <chenhao288@hisilicon.com> Signed-off-by:
-
Mohammad Athari Bin Ismail authored
An issue found when network interface is down and up again, FPE handshake fails to trigger. This is due to __FPE_REMOVING bit remains being set in stmmac_fpe_stop_wq() but not cleared in stmmac_fpe_start_wq(). This cause FPE workqueue task, stmmac_fpe_lp_task() not able to be executed. To fix this, add clearing __FPE_REMOVING bit in stmmac_fpe_start_wq(). Fixes: 5a558611 ("net: stmmac: support FPE link partner hand-shaking procedure") Signed-off-by:
Mohammad Athari Bin Ismail <mohammad.athari.ismail@intel.com> Signed-off-by:
-
- 29 Apr, 2021 14 commits
-
-
Oleksij Rempel authored
ksz_switch_alloc() will return NULL only if allocation is failed. So, the proper return value is -ENOMEM. Fixes: 60a36476 ("net: dsa: microchip: Add Microchip KSZ8863 SMI based driver support") Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
-
Oleksij Rempel authored
Fix possible NULL pointer dereference in case devm_kzalloc() failed to allocate memory Fixes: cc13e52c ("net: dsa: microchip: Add Microchip KSZ8863 SPI based driver support") Reported-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Oleksij Rempel authored
Fix possible NULL pointer dereference in case devm_kzalloc() failed to allocate memory. Fixes: 60a36476 ("net: dsa: microchip: Add Microchip KSZ8863 SMI based driver support") Reported-by:
-
Yang Li authored
Variable 'err' is set to -EIO but this value is never read as it is overwritten with a new value later on, hence it is a redundant assignment and can be removed. Clean up the following clang-analyzer warning: drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:1195:2: warning: Value stored to 'err' is never read [clang-analyzer-deadcode.DeadStores] Reported-by:
-
Jiapeng Chong authored
Variable queue is set to bp->queues but these values is not used as it is overwritten later on, hence redundant assignment can be removed. Cleans up the following clang-analyzer warning: drivers/net/ethernet/cadence/macb_main.c:4919:21: warning: Value stored to 'queue' during its initialization is never read [clang-analyzer-deadcode.DeadStores]. drivers/net/ethernet/cadence/macb_main.c:4832:21: warning: Value stored to 'queue' during its initialization is never read [clang-analyzer-deadcode.DeadStores]. Reported-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
-
Michael Walle authored
His email bounces with permanent error "550 Invalid recipient". His last email was from 2020-09-09 on the LKML and he seems to have left TI. Signed-off-by:
Michael Walle <michael@walle.cc> Signed-off-by:
-
Michael Walle authored
His email bounces with permanent error "550 Invalid recipient". His last email on the LKML was from 2015-10-22 on the LKML. Signed-off-by:
-
David S. Miller authored
Huazhong Tan says: ==================== net: hns3: add some fixes for -net This series adds some fixes for the HNS3 ethernet driver. ==================== Signed-off-by: -
Jian Shen authored
In some cases, the device is not initialized because reset failed. If another task calls hns3_reset_notify_up_enet() before reset retry, it will cause an error since uninitialized pointer access. So add check for HNS3_NIC_STATE_INITED before calling hns3_nic_net_open() in hns3_reset_notify_up_enet(). Fixes: bb6b94a8 ("net: hns3: Add reset interface implementation in client") Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
-
Yufeng Mo authored
The message sent to VF should be initialized, otherwise random value of some contents may cause improper processing by the target. So add a initialization to message in hclge_get_link_mode(). Fixes: 9194d18b ("net: hns3: fix the problem that the supported port is empty") Signed-off-by:
-
Yufeng Mo authored
According to the UM, the type and enable status of igu_egu_hw_err should be configured separately. Currently, the type field is incorrect when disable this error. So fix it by configuring these two fields separately. Fixes: bf1faf94 ("net: hns3: Add enable and process hw errors from IGU, EGU and NCSI") Signed-off-by:
-
Yang Li authored
Variable 'err' is set to -ENOMEM but this value is never read as it is overwritten with a new value later on, hence the 'If statements' and assignments are redundantand and can be removed. Cleans up the following clang-analyzer warning: net/ipv6/seg6.c:126:4: warning: Value stored to 'err' is never read [clang-analyzer-deadcode.DeadStores] Reported-by:
-
Zhang Zhengming authored
There is a crash in the function br_get_link_af_size_filtered, as the port_exists(dev) is true and the rx_handler_data of dev is NULL. But the rx_handler_data of dev is correct saved in vmcore. The oops looks something like: ... pc : br_get_link_af_size_filtered+0x28/0x1c8 [bridge] ... Call trace: br_get_link_af_size_filtered+0x28/0x1c8 [bridge] if_nlmsg_size+0x180/0x1b0 rtnl_calcit.isra.12+0xf8/0x148 rtnetlink_rcv_msg+0x334/0x370 netlink_rcv_skb+0x64/0x130 rtnetlink_rcv+0x28/0x38 netlink_unicast+0x1f0/0x250 netlink_sendmsg+0x310/0x378 sock_sendmsg+0x4c/0x70 __sys_sendto+0x120/0x150 __arm64_sys_sendto+0x30/0x40 el0_svc_common+0x78/0x130 el0_svc_handler+0x38/0x78 el0_svc+0x8/0xc In br_add_if(), we found there is no guarantee that assigning rx_handler_data to dev->rx_handler_data will before setting the IFF_BRIDGE_PORT bit of priv_flags. So there is a possible data competition: CPU 0: CPU 1: (RCU read lock) (RTNL lock) rtnl_calcit() br_add_slave() if_nlmsg_size() br_add_if() br_get_link_af_size_filtered() -> netdev_rx_handler_register ... // The order is not guaranteed ... -> dev->priv_flags |= IFF_BRIDGE_PORT; // The IFF_BRIDGE_PORT bit of priv_flags has been set -> if (br_port_exists(dev)) { // The dev->rx_handler_data has NOT been assigned -> p = br_port_get_rcu(dev); .... -> rcu_assign_pointer(dev->rx_handler_data, rx_handler_data); ... Fix it in br_get_link_af_size_filtered, using br_port_get_check_rcu() and checking the return value. Signed-off-by:Zhang Zhengming <zhangzhengming@huawei.com> Reviewed-by:
Zhao Lei <zhaolei69@huawei.com> Reviewed-by:
Wang Xiaogang <wangxiaogang3@huawei.com> Suggested-by:
Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by:
-
David S. Miller authored
Davide Caratti says: ==================== fix stack OOB read while fragmenting IPv4 packets - patch 1/2 fixes openvswitch IPv4 fragmentation, that does a stack OOB read after commit d52e5a7e ("ipv4: lock mtu in fnhe when received PMTU < net.ipv4.route.min_pmt") - patch 2/2 fixes the same issue in TC 'sch_frag' code ==================== Signed-off-by:
-
