- 26 Apr, 2019 2 commits
-
-
Dmitry Torokhov authored
HUTRR56 defined a new usage code on consumer page to cycle through set of keyboard layouts, let's add this mapping. Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
The HID usage tables define a key to cycle through a set of keyboard layouts, let's add corresponding keycode. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 23 Apr, 2019 2 commits
-
-
Joseph Salisbury authored
Signed-off-by: Joseph Salisbury <joseph.salisbury@microsoft.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Jean Delvare authored
The OLPC XO-1.75 and XO-4 are ARM-based laptops, using the Marvell MMP architecture, so don't present this driver on other architectures except for build-testing purposes. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 04 Apr, 2019 4 commits
-
-
Ziping Chen authored
Allwinner A83T SoC has a low res adc like the one in Allwinner A10 SoC, however, the A10 SoC's vref of lradc internally is divided by 2/3 and the A83T SoC's vref of lradc internally is divided by 3/4, thus add a hardware variant for it to be compatible with various devices. Signed-off-by: Ziping Chen <techping.chan@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Anson Huang authored
With calling dev_pm_set_wake_irq() to set SNVS ON/OFF button as wakeup source for suspend, generic wake irq mechanism will automatically enable it as wakeup source when suspend, then the enable_irq_wake()/disable_irq_wake() can be removed in suspend/resume callback, it simplifies the code. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Vladimir Zapolskiy authored
The keypad controller on NXP LPC32xx requires its clock gate to be open, therefore add description of the requires 'clocks' property. In addition adjust the example by adding description of required 'clocks' property and by fixing 'interrupts' property. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
Instead of signalling wakeup directly from i8042, let psmouse and atkbd drivers execute basic protocol handling and only then signal wakeup condition. This solves the issue where we increment wakeup counter simply because we are getting responses from keyboard/mouse to the commands we ourselves send to them as part of suspend transition. Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 03 Apr, 2019 3 commits
-
-
Jagan Teki authored
GT5663 is capacitive touch controller with customized smart wakeup gestures. Add support for it by adding compatible and supported chip data. The chip data on GT5663 is similar to GT1151, like - config data register has 0x8050 address - config data register max len is 240 - config data checksum has 16-bit Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Jagan Teki authored
Goodix CTP controllers require AVDD28, VDDIO regulators for power-on sequence. The delay between these regualtor operations as per Power-on Timing from datasheet[1] is 0 (T1 >= 0 usec). So, enable and disable these regulators in proper order using normal regulator functions without any delay in between. [1] GT5663 Datasheet_English_20151106_Rev.01 Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Gustavo A. R. Silva authored
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; size = sizeof(struct foo) + count * sizeof(struct boo); instance = kzalloc(size, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL); Notice that, in this case, variable size is not necessary, hence it is removed. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 04 Mar, 2019 2 commits
-
-
Andy Shevchenko authored
Reduce size of duplicated comments by switching to use SPDX identifier. No functional change. While here, correct MODULE_LICENSE() string to be aligned with license text. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Andy Shevchenko authored
ACPI allows to enumerate specific devices by using compatible strings. Enable that enumeration for EDT touchscreen devices. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 19 Feb, 2019 1 commit
-
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/input/touchscreen/ti_am335x_tsc.c: In function 'titsc_suspend': drivers/input/touchscreen/ti_am335x_tsc.c:510:24: warning: variable 'tscadc_dev' set but not used [-Wunused-but-set-variable] drivers/input/touchscreen/ti_am335x_tsc.c: In function 'titsc_resume': drivers/input/touchscreen/ti_am335x_tsc.c:527:24: warning: variable 'tscadc_dev' set but not used [-Wunused-but-set-variable] It's not used any more after 333e07ec ("Input: ti_am335x_tsc: Mark TSC device as wakeup source") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 18 Feb, 2019 1 commit
-
-
Rob Herring authored
Convert string compares of DT node names to use of_node_name_eq helper instead. For the root node on SUN DT, we need to retrieve the 'name' property as it is the rare case where the 'name' property and node name differ. With both changes, it removes direct access to the node name pointer. While at it, convert the open coded loop to use for_each_child_of_node(). Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 17 Feb, 2019 9 commits
-
-
Guido Günther authored
"Invalid config" gives little idea what's wrong. Print the values that must not be 0 so we know which ones are off. Signed-off-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Guido Günther authored
Refer to touchscreen.txt for generic touch properties. This avoids duplication and we're using the generic code to parse these in the driver. While at that add touchscreen-size-{x,y} which are respected by the driver as well. Signed-off-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Guido Günther authored
From what I've seen in vendor trees it's fine to treat this as gt1x¹. Tested on the Purism Librem 5 Devkit (Rocktech JH057N00900 panel). [1]: https://github.com/TadiT7/android_kernel_mtk-4.4/tree/master/drivers/input/touchscreen/mediatek/GT5688Signed-off-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Sven Van Asbroeck authored
Remove a leftover spinlock. This was required back when mod_delayed_work() did not exist, and had to be implemented with a cancel + queue. See commit e7c2f967 ("workqueue: use mod_delayed_work() instead of __cancel + queue") schedule_delayed_work() and mod_delayed_work() can now be used concurrently. So the spinlock is no longer needed. Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/input/joystick/db9.c: In function ‘db9_saturn_read_packet’: drivers/input/joystick/db9.c:256:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (tmp == 0xff) { ^ drivers/input/joystick/db9.c:263:2: note: here default: ^~~~~~~ Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Sven Van Asbroeck authored
Remove a spinlock which prevents schedule_delayed_work() and mod_delayed_work() from executing concurrently. This was required back when mod_delayed_work() did not exist, and had to be implemented with a cancel + schedule. See commit e7c2f967 ("workqueue: use mod_delayed_work() instead of __cancel + queue") schedule_delayed_work() and mod_delayed_work() can now be used concurrently. So the spinlock is no longer needed. Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Matthias Fend authored
This is required to specify generic touchscreen properties via DT. Signed-off-by: Matthias Fend <matthias.fend@wolfvision.net> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
Now that LEDs core allows "blocking" flavor of "set brightness" method we can use it and get rid of private work item. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Martin Kepplinger authored
Use devm_gpiod_get_optional() and gpiod_set_value_cansleep() instead of the old API. The st1232_ts_power() now passes on the inverted "poweron" value to reflect the correct logical value. Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 09 Feb, 2019 2 commits
-
-
Marek Vasut authored
Fetching the geometry from the ILI251x registers seems unreliable and sometimes returns all zeroes. Add support for fetching the geometry and axis inversion from DT instead. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dan Carpenter authored
The PTR_ERR(NULL) value is zero and it's not useful to print that. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 08 Feb, 2019 3 commits
-
-
Dmitry Torokhov authored
We need to access I2C bus when switching brightness, and that may block, therefore we have to set stmfts_brightness_set() as LED's brightness_set_blocking() method. Fixes: 72d1f234 ("Input: tm2-touchkey - add touchkey driver support for TM2") Acked-by: Andi Shyti <andi@etezian.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
We need to turn regulators on and off when switching brightness, and that may block, therefore we have to set stmfts_brightness_set() as LED's brightness_set_blocking() method. Fixes: 78bcac7b ("Input: add support for the STMicroelectronics FingerTip touchscreen") Acked-by: Andi Shyti <andi@etezian.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Dmitry Torokhov authored
By switching to devm_device_add_group() we can complete driver conversion to using managed resources and get rid of ili210x_i2c_remove(). Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 07 Feb, 2019 10 commits
-
-
Marek Vasut authored
Add support for ILI251x touch controller. This controller is similar to the ILI210x, except for the following differences: - Does not support I2C R-W transfer, Read must be followed by an obscenely long delay, and then followed by Write - Does support 10 simultaneous touch inputs. - Touch data format is slightly different, pressure reporting does not work although the touch data contain such information. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Marek Vasut authored
Add OF match table for the ili210x touchscreen. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Marek Vasut authored
Perform the register access only after the I2C client data are set, this is only done in preparation for the subsequent patch which uses the I2C client data in the register IO function. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Marek Vasut authored
Get rid of the packed structures for representing data as that does not apply to other similar Ilitek touchscreens. Instead, implement a function which parses the data and reports touch events and coordinates. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Marek Vasut authored
Convert the driver to devm_request_irq(), drop the related unmanaged deregistration code and add ili210x_irq_teardown() to tear the IRQ down and cancel possible touchscreen pending work. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Marek Vasut authored
The touchscreen can have a reset GPIO connected to it, add support for such an arrangement. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Marek Vasut authored
Convert the driver to dev-managed allocations. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Marek Vasut authored
The .get_pendown_state callback is set only by the platform data code, which was just removed. Thus, get_pendown_state() always returns false, so drop that altogether. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Marek Vasut authored
There is not a single user of the ili210x platform data in the kernel, just drop it. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Marek Vasut authored
Add DT binding document for the Ilitek ILI210x and ILI251x touchscreen controllers. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 06 Feb, 2019 1 commit
-
-
Brian Masney authored
This patch adds a new vibrator driver that supports various Qualcomm MSM SOCs. Driver was tested on a LG Nexus 5 (hammerhead) phone. Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-