- 15 Apr, 2013 26 commits
-
-
Andy Shevchenko authored
Since we will have not only DT cases in future let's rename DT related methods to reflect their belonging. The rename was done as follows: struct dw_dma_filter_args -> struct dw_dma_of_filter_args dw_dma_generic_filter() -> dw_dma_of_filter() dw_dma_xlate() -> dw_dma_of_xlate() dw_dma_id_table -> dw_dma_of_id_table There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
-
Andy Shevchenko authored
Let's use capital letter as a first one in the comments. There is no functional changes. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
-
Lars-Peter Clausen authored
The 'mask' parameter is not modified in __dma_request_channel and really shouldn't be. Make this explicit by making the parameter const. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
-
Barry Song authored
there is hardcode which enabled the clock of dmaengine before, this patch takes the clock by standard clock API and enable it in probe. Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
-
Andy Shevchenko authored
When we pause the channel after transfer is completed we might stuck in the dwc_chan_pause() because the FIFO_EMPTY flag will never be asserted. To avoid the endless loop we introduce a timeout here (*). The proper solution is to somehow get the residue in FIFO and avoid busyloop when transfer is done, but this task is not simple and fast. Unfortunately we can't use cpu_relax() in conjunction with jiffies checker, due to we have interrupts disabled by spin_lock_irqsave() and there is a big chance that no interrupts will come to update the jiffies.. (*) The worst case is AHB write * FIFO size / hclk = 5.12 us, where AHB write = 2 cycles, hclk = 100 MHz, burst size = 1 byte, FIFO size = 256 bytes. The proposed 40us timeout might be considered as a big one, though we enter to that state only when we have the transfer already completed. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
-
Syam Sidhardhan authored
kfree on NULL pointer is a no-op. Signed-off-by: Syam Sidhardhan <s.syam@samsung.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
-
Fabio Estevam authored
Since commit 84c1e63c12 (dma: Remove erroneous __exit and __exit_p() references) the following section mismatch happens: WARNING: drivers/built-in.o(.text+0x20f94): Section mismatch in reference from the function ipu_remove() to the function .exit.text:ipu_idmac_exit() The function ipu_remove() references a function in an exit section. Often the function ipu_idmac_exit() has valid usage outside the exit section and the fix is to remove the __exit annotation of ipu_idmac_exit. Remove the '__exit' annotation from ipu_idmac_exit in order to fix it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Maxin B. John <maxin.john@enea.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
-
Stephen Warren authored
Tegra only supports, and always enables, device tree. Remove all ifdefs and runtime checks for DT support from the driver. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
-
Sachin Kamat authored
Use the newly introduced devm_ioremap_resource() instead of devm_request_and_ioremap() which provides more consistent error handling. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
-
Andy Shevchenko authored
Comparison between buffers is stored to the dedicated structure. Note that the verify result is now accessible only via file 'results' in the debugfs. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
-
Andy Shevchenko authored
The patch provides a storage for the test results in the linked list. The gathered data could be used after test is done. The new file 'results' represents gathered data of the in progress test. The messages collected are printed to the kernel log as well. Example of output: % cat /sys/kernel/debug/dmatest/results dma0chan0-copy0: #1: No errors with src_off=0x7bf dst_off=0x8ad len=0x3fea (0) The message format is unified across the different types of errors. A number in the parens represents additional information, e.g. error code, error counter, or status. Note that the buffer comparison is done in the old way, i.e. data is not collected and just printed out. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
-
Andy Shevchenko authored
Its meaning is to limit amount of error messages to be printed out when buffer mismatch is occured. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
-
Andy Shevchenko authored
The following command should return actual state of the test. % cat /sys/kernel/debug/dmatest/run To wait for test done the user may perform a busy loop that checks the state. % while [ $(cat /sys/kernel/debug/dmatest/run) = "Y" ] > do > echo -n "." > sleep 1 > done > echo Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
-
Andy Shevchenko authored
Instead of doing modprobe dmatest ... modprobe -r dmatest we allow user to run tests interactively. The dmatest could be built as module or inside kernel. Let's consider those cases. 1. When dmatest is built as a module... After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest folder with nodes will be created. They are the same as module parameters with addition of the 'run' node that controls run and stop phases of the test. Note that in this case test will not run on load automatically. Example of usage: % echo dma0chan0 > /sys/kernel/debug/dmatest/channel % echo 2000 > /sys/kernel/debug/dmatest/timeout % echo 1 > /sys/kernel/debug/dmatest/iterations % echo 1 > /sys/kernel/debug/dmatest/run After a while you will start to get messages about current status or error like in the original code. Note that running a new test will stop any in progress test. 2. When built-in in the kernel... The module parameters that is supplied to the kernel command line will be used for the first performed test. After user gets a control, the test could be interrupted or re-run with same or different parameters. For the details see the above section "1. When dmatest is built as a module..." In both cases the module parameters are used as initial values for the test case. You always could check them at run-time by running % grep -H . /sys/module/dmatest/parameters/* Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
-
Andy Shevchenko authored
Better to keep test parameters separate from internal variables. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
-
Andy Shevchenko authored
We don't need to have them global and later we would like to protect access to them as well. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
-
Andy Shevchenko authored
The proposed change will remove usage of the module parameters as global variables. In future it helps to run different test cases sequentially. The patch introduces the run_threaded_test() and stop_threaded_test() functions that could be used later outside of dmatest_init, dmatest_exit scope. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
-
Andy Shevchenko authored
This will help in future to hide a global variable usage. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
-
Andy Shevchenko authored
If user have the timeout alike issues and wants to cancel the thread immediately, the current call of wait_event_freezable_timeout is preventing to this until timeout is expired. Thus, user will experience the unnecessary delays. Adding kthread_should_stop() check inside wait_event_freezable_timeout() solves that. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
-
Dave Jiang authored
Looks like only the RAID channels are allowed to have irq coalescing support in the existing code. Fixing that. The ioat3 cleanup code can handle memcpy ops anyways Signed-off-by: Dave Jiang <dave.jiang@intel.com> Acked-by: Dan Williams <djbw@fb.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
-
Dave Jiang authored
Making OP field a hex instead of integer to make it more readable. Also add the dump out of the NEXT field. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Acked-by: Dan Williams <djbw@fb.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
-
Maxin B. John authored
Removing the annotation with __exit and referencing with __exit_p() present in dma driver module remove hooks. Part of the __devexit and __devexit_p() purge. Signed-off-by: Maxin B. John <maxin.john@enea.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
-
Maxin B. John authored
Fix this compiler warning: warning: 'td_remove' defined but not used [-Wunused-function] Signed-off-by: Maxin B. John <maxin.john@enea.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
-
Tomoya MORINAGA authored
pdc_desc_get() is called from pd_prep_slave_sg, and the function is called from interrupt context(e.g. Uart driver "pch_uart.c"). In fact, I saw kernel error message. So, GFP_ATOMIC must be used not GFP_NOIO. Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
-
Jassi Brar authored
Fix the logic to allow mc programming of second transfer after first has been done, by removing immediate return upon success and iterating until we detect QFull or DMAC dying. Reported-by: Alvaro Moran <dirac3000@gmail.com> Tested-by: Alvaro Moran <dirac3000@gmail.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
-
Linus Torvalds authored
-
- 14 Apr, 2013 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Misc fixes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Flush lazy MMU when DEBUG_PAGEALLOC is set x86/mm/cpa/selftest: Fix false positive in CPA self test x86/mm/cpa: Convert noop to functional fix x86, mm: Patch out arch_flush_lazy_mmu_mode() when running on bare metal x86, mm, paravirt: Fix vmalloc_fault oops during lazy MMU updates
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Misc fixlets" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/cputime: Fix accounting on multi-threaded processes sched/debug: Fix sd->*_idx limit range avoiding overflow sched_clock: Prevent 64bit inatomicity on 32bit systems sched: Convert BUG_ON()s in try_to_wake_up_local() to WARN_ON_ONCE()s
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Misc fixlets" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: Fix error return code ftrace: Fix strncpy() use, use strlcpy() instead of strncpy() perf: Fix strncpy() use, use strlcpy() instead of strncpy() perf: Fix strncpy() use, always make sure it's NUL terminated perf: Fix ring_buffer perf_output_space() boundary calculation perf/x86: Fix uninitialized pt_regs in intel_pmu_drain_bts_buffer()
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "One fix for a hotplug locking regressions, and one fix for an oops if you unplug the monitor at an inopportune moment on the udl device." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/fb-helper: Fix locking in drm_fb_helper_hotplug_event udl: handle EDID failure properly.
-
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommuLinus Torvalds authored
Pull m68knommu fix from Greg Ungerer: "This contains only a single compilation fix for ColdFire m68k targets that use local non-GPIOLIB support." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: define a local gpio_request_one() function
-
git://www.linux-watchdog.org/linux-watchdogLinus Torvalds authored
Pull watchdog fix from Wim Van Sebroeck: "It will fix compile errors for the at91rm9200_wdt driver" * git://www.linux-watchdog.org/linux-watchdog: watchdog: Revert the AT91RM9200_WATCHDOG dependency
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull one more btrfs fix from Chris Mason: "This has a recent fix from Josef for our tree log replay code. It fixes problems where the inode counter for the number of bytes in the file wasn't getting updated properly during fsync replay. The commit did get rebased this morning, but it was only to clean up the subject line. The code hasn't changed." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: make sure nbytes are right after log replay
-
Linus Torvalds authored
Merge tag 'trace-fixes-v3.9-rc-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull ftrace fixes from Steven Rostedt: "Namhyung Kim found and fixed a bug that can crash the kernel by simply doing: echo 1234 | tee -a /sys/kernel/debug/tracing/set_ftrace_pid Luckily, this can only be done by root, but still is a nasty bug." * tag 'trace-fixes-v3.9-rc-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Move ftrace_filter_lseek out of CONFIG_DYNAMIC_FTRACE section tracing: Fix possible NULL pointer dereferences
-
Linus Torvalds authored
Nothing is using it yet, but this will allow us to delay the open-time checks to use time, without breaking the normal UNIX permission semantics where permissions are determined by the opener (and the file descriptor can then be passed to a different process, or the process can drop capabilities). Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Nicolas Ferre authored
Compiling the at91rm9200_wdt.c driver without at91rm9200 support was leading to several errors: drivers/built-in.o: In function `at91_wdt_close': at91_adc.c:(.text+0xc9fe4): undefined reference to `at91_st_base' drivers/built-in.o: In function `at91_wdt_write': at91_adc.c:(.text+0xca004): undefined reference to `at91_st_base' drivers/built-in.o: In function `at91wdt_shutdown': at91_adc.c:(.text+0xca01c): undefined reference to `at91_st_base' drivers/built-in.o: In function `at91wdt_suspend': at91_adc.c:(.text+0xca038): undefined reference to `at91_st_base' drivers/built-in.o: In function `at91_wdt_open': at91_adc.c:(.text+0xca0cc): undefined reference to `at91_st_base' drivers/built-in.o:at91_adc.c:(.text+0xca2c8): more undefined references to `at91_st_base' follow So, reverting the modification of the "depends" Kconfig line introduced by patch a6a1bcd3 (watchdog: at91rm9200: add DT support) seems to be the good solution. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
-
- 13 Apr, 2013 3 commits
-
-
Suleiman Souhlal authored
Revert commit 62a3ddef ("vfs: fix spinning prevention in prune_icache_sb"). This commit doesn't look right: since we are looking at the tail of the list (sb->s_inode_lru.prev) if we want to skip an inode, we should put it back at the head of the list instead of the tail, otherwise we will keep spinning on it. Discovered when investigating why prune_icache_sb came top in perf reports of a swapping load. Signed-off-by: Suleiman Souhlal <suleiman@google.com> Signed-off-by: Hugh Dickins <hughd@google.com> Cc: stable@vger.kernel.org # v3.2+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Anatol Pomozov identified a race condition that hits module unloading and re-loading. To quote Anatol: "This is a race codition that exists between kset_find_obj() and kobject_put(). kset_find_obj() might return kobject that has refcount equal to 0 if this kobject is freeing by kobject_put() in other thread. Here is timeline for the crash in case if kset_find_obj() searches for an object tht nobody holds and other thread is doing kobject_put() on the same kobject: THREAD A (calls kset_find_obj()) THREAD B (calls kobject_put()) splin_lock() atomic_dec_return(kobj->kref), counter gets zero here ... starts kobject cleanup .... spin_lock() // WAIT thread A in kobj_kset_leave() iterate over kset->list atomic_inc(kobj->kref) (counter becomes 1) spin_unlock() spin_lock() // taken // it does not know that thread A increased counter so it remove obj from list spin_unlock() vfree(module) // frees module object with containing kobj // kobj points to freed memory area!! kobject_put(kobj) // OOPS!!!! The race above happens because module.c tries to use kset_find_obj() when somebody unloads module. The module.c code was introduced in commit 6494a93d" Anatol supplied a patch specific for module.c that worked around the problem by simply not using kset_find_obj() at all, but rather than make a local band-aid, this just fixes kset_find_obj() to be thread-safe using the proper model of refusing the get a new reference if the refcount has already dropped to zero. See examples of this proper refcount handling not only in the kref documentation, but in various other equivalent uses of this pattern by grepping for atomic_inc_not_zero(). [ Side note: the module race does indicate that module loading and unloading is not properly serialized wrt sysfs information using the module mutex. That may require further thought, but this is the correct fix at the kobject layer regardless. ] Reported-analyzed-and-tested-by: Anatol Pomozov <anatol.pomozov@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Josef Bacik authored
While trying to track down a tree log replay bug I noticed that fsck was always complaining about nbytes not being right for our fsynced file. That is because the new fsync stuff doesn't wait for ordered extents to complete, so the inodes nbytes are not necessarily updated properly when we log it. So to fix this we need to set nbytes to whatever it is on the inode that is on disk, so when we replay the extents we can just add the bytes that are being added as we replay the extent. This makes it work for the case that we have the wrong nbytes or the case that we logged everything and nbytes is actually correct. With this I'm no longer getting nbytes errors out of btrfsck. Cc: stable@vger.kernel.org Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
-
- 12 Apr, 2013 1 commit
-
-
Dave Hansen authored
This patch attempts to fix: https://bugzilla.kernel.org/show_bug.cgi?id=56461 The symptom is a crash and messages like this: chrome: Corrupted page table at address 34a03000 *pdpt = 0000000000000000 *pde = 0000000000000000 Bad pagetable: 000f [#1] PREEMPT SMP Ingo guesses this got introduced by commit 611ae8e3 ("x86/tlb: enable tlb flush range support for x86") since that code started to free unused pagetables. On x86-32 PAE kernels, that new code has the potential to free an entire PMD page and will clear one of the four page-directory-pointer-table (aka pgd_t entries). The hardware aggressively "caches" these top-level entries and invlpg does not actually affect the CPU's copy. If we clear one we *HAVE* to do a full TLB flush, otherwise we might continue using a freed pmd page. (note, we do this properly on the population side in pud_populate()). This patch tracks whenever we clear one of these entries in the 'struct mmu_gather', and ensures that we follow up with a full tlb flush. BTW, I disassembled and checked that: if (tlb->fullmm == 0) and if (!tlb->fullmm && !tlb->need_flush_all) generate essentially the same code, so there should be zero impact there to the !PAE case. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Artem S Tashkinov <t.artem@mailcity.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-