- 21 Mar, 2016 14 commits
-
-
Mitko Haralanov authored
This change adds a pointer to the process mm_struct when calling hfi1_release_user_pages(). Previously, the function used the mm_struct of the current process to adjust the number of pinned pages. However, is some cases, namely when unpinning pages due to a MMU notifier call, we want to drop into that code block as it will cause a deadlock (the MMU notifiers take the process' mmap_sem prior to calling the callbacks). By allowing to caller to specify the pointer to the mm_struct, the caller has finer control over that part of hfi1_release_user_pages(). Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by:
Dean Luick <dean.luick@intel.com> Signed-off-by:
Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by:
Jubin John <jubin.john@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
Mitko Haralanov authored
System administrators can use the locked memory ulimit setting to set the maximum amount of memory a user can lock/pin. However, this setting alone is not enough to guarantee good operation of the hfi1 driver due to the fact that the setting does not have fine enough granularity to account for the limit being used by multiple user processes and caches. Therefore, a better limiting algorithm is needed. This is where the new hfi1_can_pin_pages() function and the cache_size module parameter come in. The function works by looking at the ulimit and cache_size value to compute a cache size. The algorithm examines the ulimit value and, if it is not "unlimited", computes a per-cache limit based on the number of configured user contexts. After that, the lower of the two - cache_size and computed per-cache limit - is used. Reviewed-by:
-
Mitko Haralanov authored
Add support for caching of user buffers used for SDMA transfers. This change improves performance by avoiding repeatedly pinning the pages of buffers, which are being re-used by the application. While the cost of the pinning operation has been made heavier by adding the extra code to search the cache tree, re-allocate pages arrays, and future cache evictions, that cost will be amortized against the savings when the same buffer is re-used. It is also worth noting that in most cases, the cost of pinning should be much lower due to the buffer already being in the cache. Reviewed-by:
-
Mitko Haralanov authored
Last address values for intervals in the interval RB tree nodes should be non-inclusive in order to avoid confusing ranges. Reviewed-by:
-
Mitko Haralanov authored
This commit adds a filter callback, which can be used to filter out interval RB nodes matching a certain interval down to a single one. This is needed for the upcoming SDMA-side caching where buffers will need to be filtered by their virtual address. Reviewed-by:
-
Mitko Haralanov authored
Interval RB trees provide their own searching function, which also takes care of determining the path through the tree that should be taken. This make the compare callback unnecessary. Reviewed-by:
-
Mitko Haralanov authored
Add a new tracepoint type for the MMU functions and calls to that tracepoint to allow tracing of MMU functionality. Reviewed-by:
-
Mitko Haralanov authored
The interval RB trees can handle RB nodes which hold ranged information. This is exactly the usage for the buffer cache implemented in the expected receive code path. Convert the MMU/RB functions to use the interval RB tree API. This will help with future users of the caching API, as well. Reviewed-by:
-
Mitko Haralanov authored
Tell the remove MMU/RB callback if it's being called as part of a memory invalidation or not. This can be important in preventing a deadlock if the remove callback attempts to take the map_sem semaphore because the kernel's MMU invalidation functions have already taken it. Reviewed-by:
-
Mitko Haralanov authored
The usage of function pointers for RB node insertion and removal in the expected receive code path was meant to be a small performance optimization. However, maintaining it, especially with the new MMU API, would become more troublesome as the API is extended. Since the performance optimization is minor, remove the function pointers and replace with direct calls. Reviewed-by:
-
Mitko Haralanov authored
In order to allow the remove MMU callbacks to free the RB nodes, it is necessary to prevent any references to the nodes after the remove callback has been called. Therefore, remove the node from the tree prior to calling the callback. In other words, the MMU/RB API now guarantees that all RB node operations it performs will be done prior to calling the remove callback and that the RB node will not be touched afterwards. Reviewed-by:
-
Mitko Haralanov authored
Prevent a potential NULL pointer dereference (found by code inspection) when unregistering an MMU handler. Reviewed-by:
-
Mitko Haralanov authored
Future users of the MMU/RB functions might be searching or manipulating the MMU RB trees in interrupt context. Therefore, the MMU/RB functions need to be able to run in interrupt context. This requires that we use the IRQ-aware API for spin locks. Reviewed-by:
-
Mitko Haralanov authored
The MMU notification code added to the expected receive side has been re-factored and split into it's own file. This was done in order to make the code more general and, therefore, usable by other parts of the driver. The caching behavior remains the same. However, the handling of the RB tree (insertion, deletions, and searching) as well as the MMU invalidation processing is now handled by functions in the mmu_rb.[ch] files. Reviewed-by:
-
- 17 Mar, 2016 26 commits
-
-
Alex Estrin authored
Accordingly IB Spec post WR to receive queue must complete with error if QP is in Error state. Please refer to C10-42, C10-97.2.1 Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by:
Alex Estrin <alex.estrin@intel.com> Signed-off-by:
-
Mike Marciniszyn authored
Set the piothreshold to the agreed upon default of 256B. Reviewed-by:
-
Mike Marciniszyn authored
The adaptive pio heuristic missed a case that causes a corrupted packet on the wire. The case is if SDMA egress had been chosen for a pio-able packet and then encountered a ring space wait, the packet is queued. The sge cursor had been incremented as part of the packet build out for SDMA. After the send engine restart, the heuristic might now chose pio based on the sdma count being zero and start the mmio copy using the already incremented sge cursor. Fix this by forcing SDMA egress when the SDMA descriptor has already been built. Additionally, the code to wait for a QPs pio count to zero when switching to SDMA was missing. Add it. There is also an issue with UD QPs, in that the different SLs can pick a different egress send context. For now, just insure the UD/GSI always go through SDMA. Reviewed-by:
Vennila Megavannan <vennila.megavannan@intel.com> Signed-off-by:
-
Mike Marciniszyn authored
The following panic occurs while running ib_send_bw -a with adaptive pio turned on: [ 8551.143596] BUG: unable to handle kernel NULL pointer dereference at (null) [ 8551.152986] IP: [<ffffffffa0902a94>] pio_wait.isra.21+0x34/0x190 [hfi1] [ 8551.160926] PGD 80db21067 PUD 80bb45067 PMD 0 [ 8551.166431] Oops: 0000 [#1] SMP [ 8551.276725] task: ffff880816bf15c0 ti: ffff880812ac0000 task.ti: ffff880812ac0000 [ 8551.285705] RIP: 0010:[<ffffffffa0902a94>] pio_wait.isra.21+0x34/0x190 [hfi1] [ 8551.296462] RSP: 0018:ffff880812ac3b58 EFLAGS: 00010282 [ 8551.303029] RAX: 000000000000002d RBX: 0000000000000000 RCX: 0000000000000800 [ 8551.311633] RDX: ffff880812ac3c08 RSI: 0000000000000000 RDI: ffff8800b6665e40 [ 8551.320228] RBP: ffff880812ac3ba0 R08: 0000000000001000 R09: ffffffffa09039a0 [ 8551.328820] R10: ffff880817a0c000 R11: 0000000000000000 R12: ffff8800b6665e40 [ 8551.337406] R13: ffff880817a0c000 R14: ffff8800b6665800 R15: ffff8800b6665e40 [ 8551.355640] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8551.362674] CR2: 0000000000000000 CR3: 000000080abe8000 CR4: 00000000001406e0 [ 8551.371262] Stack: [ 8551.374119] ffff880812ac3bf0 ffff88080cf54010 ffff880800000800 ffff880812ac3c08 [ 8551.383036] ffff8800b6665800 ffff8800b6665e40 0000000000000202 ffffffffa08e7b80 [ 8551.391941] 00000001007de431 ffff880812ac3bc8 ffffffffa0904645 ffff8800b6665800 [ 8551.400859] Call Trace: [ 8551.404214] [<ffffffffa08e7b80>] ? hfi1_del_timers_sync+0x30/0x30 [hfi1] [ 8551.412417] [<ffffffffa0904645>] hfi1_verbs_send+0x215/0x330 [hfi1] [ 8551.420154] [<ffffffffa08ec126>] hfi1_do_send+0x166/0x350 [hfi1] [ 8551.427618] [<ffffffffa055a533>] rvt_post_send+0x533/0x6a0 [rdmavt] [ 8551.435367] [<ffffffffa050760f>] ib_uverbs_post_send+0x30f/0x530 [ib_uverbs] [ 8551.443999] [<ffffffffa0501367>] ib_uverbs_write+0x117/0x380 [ib_uverbs] [ 8551.452269] [<ffffffff815810ab>] ? sock_recvmsg+0x3b/0x50 [ 8551.459071] [<ffffffff81581152>] ? sock_read_iter+0x92/0xe0 [ 8551.466068] [<ffffffff81212857>] __vfs_write+0x37/0x100 [ 8551.472692] [<ffffffff81213532>] ? rw_verify_area+0x52/0xd0 [ 8551.479682] [<ffffffff81213782>] vfs_write+0xa2/0x1a0 [ 8551.486089] [<ffffffff81003176>] ? do_audit_syscall_entry+0x66/0x70 [ 8551.493891] [<ffffffff812146c5>] SyS_write+0x55/0xc0 [ 8551.500220] [<ffffffff816ae0ee>] entry_SYSCALL_64_fastpath+0x12/0x71 [ 8551.531284] RIP [<ffffffffa0902a94>] pio_wait.isra.21+0x34/0x190 [hfi1] [ 8551.539508] RSP <ffff880812ac3b58> [ 8551.544110] CR2: 0000000000000000 The priv s_sendcontext pointer was not setup properly. Fix with this patch by using the s_sendcontext and eliminating its send engine use. Reviewed-by:
-
Mike Marciniszyn authored
There is a timing hole if there had been greater than PIO_WAIT_BATCH_SIZE waiters. This code will dispatch the first batch but leave the others in the queue. If the restarted waiters don't in turn wait on a buffer, there is a hang. Fix by forcing a return when the QP queue is non-empty. Reviewed-by:
-
Mike Marciniszyn authored
The postitioning of the sdma ibhdr trace was causing an extra trace message when the tx send returned -EBUSY. Move the trace to just before the return and handle negative return values to avoid any trace. Reviewed-by:
-
Mike Marciniszyn authored
This allows for separately enabling pio and sdma tracepoints to cut the volume of trace information. Reviewed-by:
-
Mike Marciniszyn authored
The changes are to aid in coorelating trace information with QPs between the trace and qp_stats information Such changes include adds a space after QP and clarifying that the second QP is actually the remote QP. Reviewed-by:
-
Mike Marciniszyn authored
Tracking user/QP ownership is needed to debug issues with user ULPs like OpenMPI. Reviewed-by:
-
Easwar Hariharan authored
The current LED beaconing code is unclear and uses the timer handler to turn off the timer. This patch simplifies the code by removing the special semantics of timeon = timeoff = 0 being interpreted as a request to turn off the beaconing. Reviewed-by:
Ira Weiny <ira.weiny@intel.com> Reviewed-by:
Easwar Hariharan <easwar.hariharan@intel.com> Signed-off-by:
-
Kaike Wan authored
This patch fixed the problem where the driver might reschedule in atomic mode when sending packets. This is due to the fact that the call to cond_resched() in hfi1_do_send() might occur in atomic mode and a check is required to avoid the warning message: "kernel: BUG: scheduling while atomic: swapper/2/0/0x10000100." Reviewed-by:Kaike Wan <kaike.wan@intel.com> Signed-off-by:
-
Dean Luick authored
The kernel memcpy is faster than a cacheless copy. However, if too much of the L3 cache is overwritten by one-time copies then overall bandwidth suffers. Implement an adaptive scheme where full page copies are tracked and if the number of unique entries are larger than a threshold, verbs will use a cacheless copy. Tracked entries are gradually cleaned, allowing memcpy to resume once the larger copies have stopped. Reviewed-by:
-
Jubin John authored
Host handshake timeout can occur during the verify capability state. This is a LNI related failure and should be handled in the same way as other LNI failures. Reviewed-by:
-
Dean Luick authored
Different OSes using parts of the same hardware may leave cross-device flags set. Export a debugfs file to view and clear these flags if needed. Reviewed-by:
-
Dean Luick authored
External i2c firmware updates are done in multiple steps and cannot have other things done in between. For debugfs files, acquire the resource on open and release it on close. Reviewed-by:
-
Dean Luick authored
The hardware mutex is now held only long enough to set or clear flags. Reduce the timeout to something more reasonable. Reviewed-by:
-
Dean Luick authored
The flag HFI1_DO_INIT_ASIC flag is no longer used. Remove the flag and the code that sets it. Reviewed-by:
-
Dean Luick authored
Use the resource reservation system to flag that the ASIC thermal has been initialized. Reviewed-by:
-
Dean Luick authored
Remove the mutex guarding each operation in favor the ASIC resource acquire/release. Push the resource acquire/release, above each operation call to allow exclusive access across multiple operations. Reviewed-by:
-
Dean Luick authored
The SBus resource includes SBUS, PCIE, and THERM registers. Change SBus handling to use the new ASIC resource reservation system. Reviewed-by:
-
Dean Luick authored
Change EPROM handling to use the new ASIC resource reservation system. Reviewed-by:
-
Dean Luick authored
The ASIC block is a shared hardware resource between two devices on the chip. Add functions to acquire and release these resources in a way that is safe for both multiple users on the same OS and multiple users on different OSes, while holding the hardware mutex as little as possible. Reservations are noted in a scratch register in the shared region. There are two types of reservations: per-HFI dynamic and permanent. Reviewed-by:
-
Dean Luick authored
Create a shared structure to exist between devices that share the same ASIC. Reviewed-by:
-
Dean Luick authored
The ASIC block is shared between two HFIs. Individual devices should not initialize registers there. Retain the power-on values. Individual users set registers as needed with one exception. Clear sbus fast mode on "slow" calls. Reviewed-by:
-
Harish Chegondi authored
This change was recommended by Coccinelle tool when I ran the command: -bash-4.2$ make coccicheck MODE=patch M=drivers/infiniband/hw/hfi1/ Reviewed-by:
Harish Chegondi <harish.chegondi@intel.com> Signed-off-by:
-
Harish Chegondi authored
Implement changes recommended by the Coccinelle tool to move constant to the right in bitwise operations -bash-4.2$ make coccicheck MODE=report M=drivers/infiniband/hw/hfi1/ drivers/infiniband/hw/hfi1/pio.c:765:4-16: Move constant to right. drivers/infiniband/hw/hfi1/rc.c:2503:19-29: Move constant to right. drivers/infiniband/hw/hfi1/chip.c:9813:11-22: Move constant to right. drivers/infiniband/hw/hfi1/chip.c:14468:29-40: Move constant to right. Reviewed-by:
-
