- 11 Jun, 2021 40 commits
-
-
Hariprasad Kelam authored
Add new mailbox to enable PF to configure VF as trusted VF. Trusted VF feature allows VFs to perform priviliged operations such as enabling VF promiscuous mode, all-multicast mode and changing the VF MAC address configured by PF. Refactored the VF interface flags maintained by the AF driver such that the flags do not overlap for various configurations. Signed-off-by:
Hariprasad Kelam <hkelam@marvell.com> Signed-off-by:
Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by:
Sunil Kovvuri Goutham <Sunil.Goutham@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Naveen Mamindlapalli authored
Add ndo_set_rx_mode callback handler to configure promisc, multicast and allmulti options for VF driver. Also, modified PF driver ndo_set_rx_mode handler to support multicast and promisc mode independently. Signed-off-by:
-
Naveen Mamindlapalli authored
Currently, multicast packet filtering is accomplished by installing MCAM rule that matches all-multicast MAC address and has its NPC_RX_ACTION set to unicast to PF. Similarly promisc feature is achieved by installing MCAM rule that matches all the traffic received by the channel and unicast the packets to PF. This approach only applies to PF and is not scalable across VFs. This patch adds support for PF/VF multicast and promisc feature by reserving NIX_RX_MCE_S entries from the global MCE list allocated during NIX block initialization. The NIX_RX_MCE_S entries create a linked list with a flag indicating the end of the list, and each entry points to a PF_FUNC (either PF or VF). When a packet NPC_RX_ACTION is set to MCAST, the corresponding NIX_RX_MCE_S list is traversed and the packet is queued to each PF_FUNC available on the list. The PF or VF driver adds the multicast/promisc packet match entry and updates the MCE list with correspondng PF_FUNC. When a PF or VF interface is disabled, the corresponding NIX_RX_MCE_S entry is removed from the MCE list and the MCAM entry will be disabled if the list is empty. Signed-off-by:
-
Wong Vee Khee authored
The commit d96febed ("net: stmmac: arrange Tx tail pointer update to stmmac_flush_tx_descriptors") introduced the following coverity warning:- 1. Unintentional integer overflow (OVERFLOW_BEFORE_WIDEN) overflow_before_widen: Potentially overflowing expression 'tx_q->cur_tx * desc_size' with type 'unsigned int' (32 bits, unsigned) is evaluated using 32-bit arithmetic, and then used in a context that expects an expression of type dma_addr_t (64 bits, unsigned). Fixed this by assigning tx_tail_addr to dma_addr_t type, as dma_addr_t datatype is decided by CONFIG_ARCH_DMA_ADDR_T_64_BIT. Fixes: d96febed ("net: stmmac: arrange Tx tail pointer update to stmmac_flush_tx_descriptors") Signed-off-by:
Wong Vee Khee <vee.khee.wong@linux.intel.com> Signed-off-by:
-
Yang Yingliang authored
Use devm_platform_get_and_ioremap_resource() to simplify code. Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
David S. Miller authored
Ioana Ciornei says: ==================== ACPI support for dpaa2 driver This patch set provides ACPI support to DPAA2 network drivers. It also introduces new fwnode based APIs to support phylink and phy layers Following functions are defined: phylink_fwnode_phy_connect() fwnode_mdiobus_register_phy() fwnode_get_phy_id() fwnode_phy_find_device() device_phy_find_device() fwnode_get_phy_node() fwnode_mdio_find_device() acpi_get_local_address() First one helps in connecting phy to phylink instance. Next three helps in getting phy_id and registering phy to mdiobus Next two help in finding a phy on a mdiobus. Next one helps in getting phy_node from a fwnode. Last one is used to get local address from _ADR object. Corresponding OF functions are refactored. Tested-on: LX2160ARDB Changes in v9: - merged some minimal changes requested in the wording of the commit messages - fixed some build problems in patch 8/15 by moving the removal of of_find_mii_timestamper from patch 8/15 to 9/15. Changes in v8: - fixed some checkpatch warnings/checks - included linux/fwnode_mdio.h in fwnode_mdio.c (fixed the build warnings) - added fwnode_find_mii_timestamper() and fwnode_mdiobus_phy_device_register() in order to get rid of the cycle dependency. - change to 'depends on (ACPI || OF) || COMPILE_TEST (for FWNODE_MDIO) - remove the fwnode_mdiobus_register from fwnode_mdio.c since it introduces a cycle of dependencies. Changes in v7: - correct fwnode_mdio_find_device() description - check NULL in unregister_mii_timestamper() - Call unregister_mii_timestamper() without NULL check - Create fwnode_mdio.c and move fwnode_mdiobus_register_phy() - include fwnode_mdio.h - Include headers directly used in acpi_mdio.c - Move fwnode_mdiobus_register() to fwnode_mdio.c - Include fwnode_mdio.h - Alphabetically sort header inclusions - remove unnecassary checks Changes in v6: - Minor cleanup - fix warning for function parameter of fwnode_mdio_find_device() - Initialize mii_ts to NULL - use GENMASK() and ACPI_COMPANION_SET() - some cleanup - remove unwanted header inclusion - remove OF check for fixed-link - use dev_fwnode() - remove useless else - replace of_device_is_available() to fwnode_device_is_available() Changes in v5: - More cleanup - Replace fwnode_get_id() with acpi_get_local_address() - add missing MODULE_LICENSE() - replace fwnode_get_id() with OF and ACPI function calls - replace fwnode_get_id() with OF and ACPI function calls Changes in v4: - More cleanup - Improve code structure to handle all cases - Remove redundant else from fwnode_mdiobus_register() - Cleanup xgmac_mdio_probe() - call phy_device_free() before returning Changes in v3: - Add more info on legacy DT properties "phy" and "phy-device" - Redefine fwnode_phy_find_device() to follow of_phy_find_device() - Use traditional comparison pattern - Use GENMASK - Modified to retrieve reg property value for ACPI as well - Resolved compilation issue with CONFIG_ACPI = n - Added more info into documentation - Use acpi_mdiobus_register() - Avoid unnecessary line removal - Remove unused inclusion of acpi.h Changes in v2: - Updated with more description in document - use reverse christmas tree ordering for local variables - Refactor OF functions to use fwnode functions ==================== Signed-off-by: -
Calvin Johnson authored
Modify dpaa2_mac_get_node() to get the dpmac fwnode from either DT or ACPI. Modify dpaa2_mac_get_if_mode() to get interface mode from dpmac_node which is a fwnode. Modify dpaa2_pcs_create() to create pcs from dpmac_node fwnode. Modify dpaa2_mac_connect() to support ACPI along with DT. Signed-off-by:
Calvin Johnson <calvin.johnson@oss.nxp.com> Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> # from the ACPI side Acked-by:
Grant Likely <grant.likely@arm.com> Signed-off-by:
-
Calvin Johnson authored
Refactor phylink_of_phy_connect() to use phylink_fwnode_phy_connect(). Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Calvin Johnson authored
Define phylink_fwnode_phy_connect() to connect phy specified by a fwnode to a phylink instance. Signed-off-by:
-
Calvin Johnson authored
Depending on the device node type, call the specific OF or ACPI mdiobus_register function. Note: For both ACPI and DT cases, endianness of MDIO controllers need to be specified using the "little-endian" property. Signed-off-by:
-
Calvin Johnson authored
Define acpi_mdiobus_register() to Register mii_bus and create PHYs for each ACPI child node. Signed-off-by:
Rafael J. Wysocki <rafael@kernel.org> Acked-by:
-
Calvin Johnson authored
Introduce a wrapper around the _ADR evaluation. Signed-off-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
-
Calvin Johnson authored
Refactor of_mdiobus_register_phy() to use fwnode_mdiobus_register_phy(). Also, remove the of_find_mii_timestamper() since the fwnode variant is used instead. Signed-off-by:
-
Calvin Johnson authored
Introduce fwnode_mdiobus_register_phy() to register PHYs on the mdiobus. From the compatible string, identify whether the PHY is c45 and based on this create a PHY device instance which is registered on the mdiobus. Along with fwnode_mdiobus_register_phy() also introduce fwnode_find_mii_timestamper() and fwnode_mdiobus_phy_device_register() since they are needed. While at it, also use the newly introduced fwnode operation in of_mdiobus_phy_device_register(). Signed-off-by:
-
Calvin Johnson authored
Callers of unregister_mii_timestamper() currently check for NULL value of mii_ts before calling it. Place the NULL check inside unregister_mii_timestamper() and update the callers accordingly. Signed-off-by:
-
Calvin Johnson authored
With the introduction of fwnode_get_phy_id(), refactor of_get_phy_id() to use fwnode equivalent. Signed-off-by:
-
Calvin Johnson authored
Extract phy_id from compatible string. This will be used by fwnode_mdiobus_register_phy() to create phy device using the phy_id. Signed-off-by:
-
Calvin Johnson authored
Refactor of_phy_find_device() to use fwnode_phy_find_device(). Signed-off-by:
-
Calvin Johnson authored
Define fwnode_phy_find_device() to iterate an mdiobus and find the phy device of the provided phy fwnode. Additionally define device_phy_find_device() to find phy device of provided device. Define fwnode_get_phy_node() to get phy_node using named reference. Signed-off-by:
-
Calvin Johnson authored
Define fwnode_mdio_find_device() to get a pointer to the mdio_device from fwnode passed to the function. Refactor of_mdio_find_device() to use fwnode_mdio_find_device(). Signed-off-by:
-
Calvin Johnson authored
Introduce a mechanism based on generic ACPI _DSD device properties definition [1] to get PHYs registered on a MDIO bus and provide them to be connected to MAC. [1] http://www.uefi.org/sites/default/files/resources/_DSD-device-properties-UUID.pdf Describe properties "phy-handle" and "phy-mode". Signed-off-by:
-
Wong Vee Khee authored
The commit 8532f613 ("net: stmmac: introduce MSI Interrupt routines for mac, safety, RX & TX") introduced the converity warnings:- 1. Unused value (UNUSED_VALUE) assigned_value: Assigning value REQ_IRQ_ERR_MAC to irq_err here, but that stored value is not used. 2. Unused value (UNUSED_VALUE) assigned_value: Assigning value REQ_IRQ_ERR_NO to irq_err here, but that stored value is overwritten before it can used. 3. Unused value (UNUSED_VALUE) assigned_value: Assigning value REQ_IRQ_ERR_WOL to irq_err here, but that stored value is not used. Fixed these by removing the unnecessary value assignments. Fixes: 8532f613 ("net: stmmac: introduce MSI Interrupt routines for mac, safety, RX & TX") Signed-off-by:
-
Oleksij Rempel authored
Take over PHY power management, otherwise PHY framework will try to access ASIX MDIO bus before MAC resume was completed. Fixes: e532a096 ("net: usb: asix: ax88772: add phylib support") Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reported-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reported-by:
Jon Hunter <jonathanh@nvidia.com> Suggested-by:
Heiner Kallweit <hkallweit1@gmail.com> Tested-by:
-
David S. Miller authored
Peng Li says: ==================== net: pc300too: clean up some code style issues This patchset clean up some code style issues. ==================== Signed-off-by: -
Peng Li authored
Networking block comments don't use an empty /* line, use /* Comment... This patch fixes the comments style issues. Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
-
Peng Li authored
Add spaces required before the open parenthesis '('. Add spaces required after that close brace '}'. Signed-off-by:Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
-
Peng Li authored
According to the chackpatch.pl, comparison to NULL could be written "!card->plxbase". Signed-off-by:
-
Peng Li authored
Should not initialise statics to 0. Signed-off-by:
-
Peng Li authored
Should not use assignment in if condition. Signed-off-by:
-
Peng Li authored
Fix the checkpatch error as "foo * bar" and should be "foo *bar". Signed-off-by:
-
Peng Li authored
This patch fixes the checkpatch error about missing a blank line after declarations. Signed-off-by:
-
Peng Li authored
This patch removes some redundant blank lines. Signed-off-by:
-
gushengxian authored
Correct a grammatical error. Signed-off-by:
gushengxian <gushengxian@yulong.com> Signed-off-by:
-
Heiner Kallweit authored
It has been reported that on RTL8106e the link-up interrupt may be significantly delayed if the user enables ASPM L1. Per default ASPM is disabled. The change leaves L1 enabled on the PCIe link (thus still allowing to reach higher package power saving states), but the NIC won't actively trigger it. Reported-by:
Koba Ko <koba.ko@canonical.com> Tested-by:
-
wengjianfeng authored
Some labels are meaningless, so we delete them and use the return statement instead of the goto statement. Signed-off-by:
wengjianfeng <wengjianfeng@yulong.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by:
-
David S. Miller authored
Julian Wiedmann says: ==================== s390/qeth: updates 2021-06-11 please apply the following patch series for qeth to netdev's net-next tree. This enables TX NAPI for those devices that didn't use it previously, so that we can eventually rip out the qdio layer's internal interrupt machinery. Other than that it's just the normal mix of minor improvements and cleanups. ==================== Signed-off-by: -
Alexandra Winter authored
Without the SWITCHDEV module, the bridgeport attribute LEARNING_SYNC of the physical device (self) does not provide any functionality. Instead of calling the no-op stub version of the switchdev functions, fail the setting of the attribute with an appropriate message. While at it, also add an error message for the 'not supported by HW' case. Signed-off-by:
Alexandra Winter <wintera@linux.ibm.com> Reviewed-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
Convert the large boolean array into a bitmap, this substantially reduces the struct's size. While at it also clarify the naming. Signed-off-by:
-
Julian Wiedmann authored
qeth_tx_complete_buf() is the only remaining user of buf->q, and the callers can easily provide this as a parameter instead. Signed-off-by:
-
Julian Wiedmann authored
Maintaining a pointer inside the aob's user-definable area is fragile and unnecessary. At this stage we only need it to overload the buffer's state field, and to access the buffer's TX queue. The first part is easily solved by tracking the aob's state within the aob itself. This also feels much cleaner and self-contained. For enabling the access to the associated TX queue, we can store the queue's index in the aob. Signed-off-by:
-
