- 17 Feb, 2016 40 commits
-
-
Rosen, Rami authored
commit 3ed80a62 (cgroup: drop module support) made including module.h redundant in the net cgroup controllers, netclassid_cgroup.c and netprio_cgroup.c. This patch removes them. Signed-off-by:
Rami Rosen <rami.rosen@intel.com> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Sergei Shtylyov says: ==================== Kill useless *switch* defaults in the Renesas Ethernet drivers Here's a set of 2 patches against DaveM's 'net-next.git' repo removing often used *default* cases doing nothing. [1/2] ravb: kill useless *switch* defaults [2/2] sh_eth: kill useless *switch* defaults ==================== Signed-off-by: -
Sergei Shtylyov authored
The driver often has the *default* cases doing nothing in the *switch* statements with the integer expressions -- remove them. Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Sergei Shtylyov authored
The driver has the *default* case doing nothing in the *switch* statement with an integer expression -- remove it. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2016-02-17 This series contains updates to i40e/i40evf only. Jesse cleans up a duplicate declaration in probe. Then fixes a bug where the driver was using a offset based off a DMA handle while mapping and unmapping using sync_single_range_for_[cpu|device], when it should be using DMA handle (returned from alloc_coherent) and the offset of the memory to be sync'd. Fixed an issue where sync_vsi_filter() was allocating memory in a way that could sleep (GFP_KERNEL) which was causing a problem when called by the team driver under rcu_read_lock(). Shannon adds a check to ensure we do not attempt to do TSO when skb->ip_summed is not set to CHECKSUM_PARTIAL. Kiran add functions related to port mirroring features such as add/delete mirror rule. Jacob assigns the i40e_pf structure directly instead of using a large memcpy, to avoid a sparse warning and lets the compiler optimize the copy since it know the size of the structure in advance. Anjali enables GENEVE capability for XL710/X710 devices with firmware API version higher than 1.4. Added flag for automatic rule eviction feature for X722, which is disabled by default. ==================== Signed-off-by: -
David S. Miller authored
Tom Lendacky says: ==================== amd-xgbe: AMD XGBE driver updates 2016-02-12 The following updates and fixes are included in this driver update series: - Disable VLAN filtering in promiscuous mode - Change from using napi_complete to napi_complete_done - Use __napi_schedule_irqoff when running in interrupt context - Verify ethtool speed setting is valid for the selected speedset - Enable PFC based on the pfc_en setting - Fix the mapping of priorities to traffic classes - Do traffic class setup when DCB nl callbacks are invoked - Check Rx queue fifos before stopping Rx queue DMA - Switch from disable_irq to masking interrupts for auto-negotiation This patch series is based on net-next. Changes from v1: - Removed #ifndef and #define of CRCPOLY_LE as part of the patch to disable VLAN filtering in promiscuous mode - Reworked changes to xgbe_setup_tc to resolve conflicts with commit 16e5cc64 (net: rework setup_tc ndo op to consume general tc operand) ==================== Signed-off-by:
-
Lendacky, Thomas authored
Currently the auto-negotiation interrupt handling disables the irq instead of masking off the interrupts. This was done because the phy library was originally used to read and write the PCS registers, which could not be performed in interrupt context. Now that the phy library is no longer used to read and write the PCS registers the interrupts can be masked off in the interrupt service routine eliminating the need to call disable_irq/enable_irq. This also requires changing the protection mutex to a spinlock. Signed-off-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
Lendacky, Thomas authored
Check to be sure that the Rx queue fifos are empty before stopping the Rx DMA channels. Signed-off-by:
-
Lendacky, Thomas authored
Currently the netdev traffic class setup is only performed when invoked through the ndo_setup_tc interface. However, the same setup should be performed when the dcbnl interface (ieee_setets) is invoked. Rework the netdev traffic class setup to be invokable through either interface and also provide the priority to traffic class mapping if available. Signed-off-by:
-
Lendacky, Thomas authored
The driver is checking the pfc_en field of the ieee_pfc structure to determine whether to associate a priority with a traffic class. This is incorrect since the pfc_en field is for determining if PFC is enabled for a traffic class. The association of priority to traffic class does not depend on whether the traffic class is enabled for PFC, so remove that check. Also, the mapping of priorities to traffic classes should be done when configuring the traffic classes and not the PFC support so move the priority to traffic class association from xgbe_config_dcb_pfc to xgbe_config_dcb_tc. Signed-off-by:
-
Lendacky, Thomas authored
Currently the PFC flow control is enabled on all traffic classes if one or more traffic classes request it. The PFC enable setting of the traffic class should be used to determine whether to enable or disable flow control for the traffic class. Signed-off-by:
-
Lendacky, Thomas authored
When using ethtool to set the speed for the device, verify that the specified speed is valid within the active speedset. Signed-off-by:
-
Lendacky, Thomas authored
Change from calling __napi_schedule to __napi_schedule_irqoff when running in interrupt context or when called by netpoll with interrupts already disabled. The Tx timer function will continue to use __napi_schedule. Signed-off-by:
-
Lendacky, Thomas authored
Change from using napi_complete to napi_complete_done to allow for the use of gro_flush_timeout in tuning network processing. Signed-off-by:
-
Lendacky, Thomas authored
When the hardware is placed in promiscuous mode it will still perform VLAN filtering and therefore may not pass all packets to the driver. Disable all VLAN filtering when entering promiscuous mode and restore VLAN filtering upon exit from promiscuous mode. In order to avoid adding forward declarations, move the VLAN related functions earlier in the file. Signed-off-by:
-
Zhang Shengju authored
Use IFF_NO_QUEUE to indicate that a device can run without a qdisc. Signed-off-by:
Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by:
-
Sowmini Varadhan authored
This commit converts commit b499ffb0 ("i40e: Look up MAC address in Open Firmware or IDPROM") to use eth_platform_get_mac_address() added by commit c7f5d105 ("net: Add eth_platform_get_mac_address() helper.") Signed-off-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Anjali Singhai Jain authored
The X722 can support automatic rule eviction for automatically added flow director rules. Feature is (should be) disabled by default. Signed-off-by:
Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by:
-
Anjali Singhai authored
This patch makes sure we check the GENEVE offload capable flag before we attempt offload. It also enables the Capability for XL710/X710 devices with FW API version higher than 1.4 Signed-off-by:
-
Jesse Brandeburg authored
Bump driver versions to i40e-1.4.12 and i40evf-1.4.8 Change-ID: I0ad82668c4ded04250391fda396ce191a42ab754 Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
-
Jacob Keller authored
Assign the i40e_pf structure directly instead of using a large memcpy, which avoids a sparse warning and lets the compiler optimize the copy since it knows the size of the structure in advance. Change-ID: I17604e23be2616521eb760290befcb767b52b3f7 Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Reviewed-by:
-
Jesse Brandeburg authored
Driver already counted allocation errors, so print them as part of the ethtool -S output. Useful for debugging if your system is having trouble making memory available for the driver. Change-ID: I83839fa86e81e6d80f03b917c88dd3ef9a64dde0 Signed-off-by:
-
Jesse Brandeburg authored
Delete the unused irq_dynamic_disable function. Change-ID: Ia46071066babd121c7c90f141b6210b00078de3f Signed-off-by:
-
Shannon Nelson authored
The PHY interrupt mask bits mask out the events we don't want, so we need to negate the bitmask of events we want. Change-ID: I273244da5a8d285b6abc84fd68a90f1e6fa0393e Signed-off-by:
Shannon Nelson <shannon.nelson@intel.com> Tested-by:
-
Kiran Patil authored
This patch implements necessary functions related to port mirroring features such as add/delete mirror rule, function to set promiscuous VLAN mode for VSI if mirror rule_type is "VLAN Mirroring". Change-ID: Iaf513fd5f188f99dcb977b48f99e73185dfddc40 Signed-off-by:
Kiran Patil <kiran.patil@intel.com> Tested-by:
-
Jesse Brandeburg authored
The driver was being called by VLAN, bonding, teaming operations that expected to be able to hold locks like rcu_read_lock(). This causes the driver to be held to the requirement to not sleep, and was found by the kernel debug options for checking sleep inside critical section, and the locking validator. Change-ID: Ibc68c835f5ffa8ffe0638ffe910a66fc5649a7f7 Signed-off-by:
-
Jesse Brandeburg authored
The sync_vsi_filter function was allocating memory in such a way that it could sleep (GFP_KERNEL) which was causing a problem when called by the team driver under rcu_read_lock(), which cannot be held while sleeping. Found with lockdep. Change-ID: I4e59053cb5eedcf3d0ca151715be3dc42a94bdd5 Signed-off-by:
-
Shannon Nelson authored
Don't bother trying to set up a TSO if the skb->ip_summed is not set to CHECKSUM_PARTIAL. Change-ID: I6495b3568e404907a2965b48cf3e2effa7c9ab55 Signed-off-by:
-
Jesse Brandeburg authored
Driver was using an offset based off a DMA handle while mapping and unmapping using sync_single_range_for[cpu|device], where it should be using DMA handle (returned from alloc_coherent) and the offset of the memory to be sync'd. Change-ID: I208256565b1595ff0e9171ab852de06b997917c6 Signed-off-by:
Williams, Mitch A <mitch.a.williams@intel.com> Tested-by:
-
Jesse Brandeburg authored
Missing space in comment, fixed. Change-ID: I8cdf3ce5994b4a97dcc3eeb33422533918546667 Reported-by:
-
Jesse Brandeburg authored
The probe routine already had a u32 val declared, no need to do it again. Found by W=2 compile. Change-ID: Id7b65f6d0ef6bb71067d0557f5be0202b6d8741e Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2016-02-16 This series contains updates to i40e/i40evf only. Shannon adds flags to MAC allocation requests to signify that the MAC VLAN filters should come from the shared resource pool. Added a new "set switch config" admin queue command and the new Cisco VXLAN-GPE cloud tunnel type for the admin queue commands. Added more detail to the NVM update debug message in order to see the full ethtool request data. Also added a few more bits of netdev data into the debugfs output for dump VSI. Pandi fixes the width of two datatypes which were being declared a different size from what they are assigned. Anjali fixes an issue where we were not doing write-back on interrupt throttle for legacy case in x722. Mitch adds a counter for ARQ overflows since sometimes an ever-growing number indicates that something bad is happening. Also added 20G speed for Tx bandwidth calculations. Jesse refactors the DCB function based on a community suggestion to change the multi-level if statement into a switch statement. Cleans up VF device IDs in the PF, since it does not need to know them. ==================== Signed-off-by: -
David S. Miller authored
John Fastabend says: ==================== tc offload for cls_u32 on ixgbe This extends the setup_tc framework so it can support more than just the mqprio offload and push other classifiers and qdiscs into the hardware. The series here targets the u32 classifier and ixgbe driver. I worked out the u32 classifier because it is protocol oblivious and aligns with multiple hardware devices I have access to. I did an initial implementation on ixgbe because (a) I have one in my box (b) its a stable driver and (c) it is relatively simple compared to the other devices I have here but still has enough flexibility to exercise the features of cls_u32. I intentionally limited the scope of this series to the basic feature set. Specifically this uses a 'big hammer' feature bit to do the offload or not. If the bit is set you get offloaded rules if it is not then rules will not be offloaded. If we can agree on this patch series there are some more patches on my queue we can talk about to make the offload decision per rule using flags similar to how we do l2 mac updates. Additionally the error strategy can be improved to be hard aborting, log and continue, etc. I think these are nice to have improvements but shouldn't block this series. Also by adding get_parse_graph and set_parse_graph attributes as in my previous flow_api work we can build programmable devices and programmatically learn when rules can or can not be loaded into the hardware. Again future work. ... v3 includes a couple style fixups suggested by Jiri and a quick fix to ixgbe to check features flag and not dev_features flag the latter being always set. ==================== Signed-off-by: -
John Fastabend authored
This patch ensures ixgbe will not try to offload hash tables from the u32 module. The device class does not currently support this so until it is enabled just abort on these tables. Interestingly the more flexible your hardware is the less code you need to implement to guard against these cases. Signed-off-by:
John Fastabend <john.r.fastabend@intel.com> Signed-off-by:
-
John Fastabend authored
This adds initial support for offloading the u32 tc classifier. This initial implementation only implements a few base matches and actions to illustrate the use of the infrastructure patches. However it is an interesting subset because it handles the u32 next hdr logic to correctly map tcp packets from ip headers using the ihl and protocol fields. After this is accepted we can extend the match and action fields easily by updating the model header file. Also only the drop action is supported initially. Here is a short test script, #tc qdisc add dev eth4 ingress #tc filter add dev eth4 parent ffff: protocol ip \ u32 ht 800: order 1 \ match ip dst 15.0.0.1/32 match ip src 15.0.0.2/32 action drop <-- hardware has dst/src ip match rule installed --> #tc filter del dev eth4 parent ffff: prio 49152 #tc filter add dev eth4 parent ffff: protocol ip prio 99 \ handle 1: u32 divisor 1 #tc filter add dev eth4 protocol ip parent ffff: prio 99 \ u32 ht 800: order 1 link 1: \ offset at 0 mask 0f00 shift 6 plus 0 eat match ip protocol 6 ff #tc filter add dev eth4 parent ffff: protocol ip \ u32 ht 1: order 3 match tcp src 23 ffff action drop <-- hardware has tcp src port rule installed --> #tc qdisc del dev eth4 parent ffff: <-- hardware cleaned up --> Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
John Fastabend authored
This adds an ixgbe data structure that is used to determine what headers:fields can be matched and in what order they are supported. For hardware devices this can be a bit tricky because typically only pre-programmed (firmware, ucode, rtl) parse graphs will be supported and we don't yet have an interface to change these from the OS. So its sort of a you get whatever your friendly vendor provides affair at the moment. In the future we can add the get routines and set routines to update this data structure. One interesting thing to note here is the data structure here identifies ethernet, ip, and tcp fields without having to hardcode them as enumerations or use other identifiers. Signed-off-by:
-
John Fastabend authored
This is a helper function drivers can use to learn if the action type is a drop action. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Acked-by:
-
John Fastabend authored
Its useful to turn off the qdisc offload feature at a per device level. This gives us a big hammer to enable/disable offloading. More fine grained control (i.e. per rule) may be supported later. Signed-off-by:
-
John Fastabend authored
This patch allows netdev drivers to consume cls_u32 offloads via the ndo_setup_tc ndo op. This works aligns with how network drivers have been doing qdisc offloads for mqprio. Signed-off-by:
-
John Fastabend authored
This patch updates setup_tc so we can pass additional parameters into the ndo op in a generic way. To do this we provide structured union and type flag. This lets each classifier and qdisc provide its own set of attributes without having to add new ndo ops or grow the signature of the callback. Signed-off-by:
-
