- 09 Sep, 2005 40 commits
-
-
Brice Goglin authored
Add a devname parameter to the pcmcia_device structure, fills it with "pcmcia<bus_id>" in pcmcia_device_add, and passes it to request_irq in pcmcia_request_irq. Signed-off-by:
Brice Goglin <Brice.Goglin@ens-lyon.org> Signed-off-by:
Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Dominik Brodowski authored
(Partly From: David Brownell <dbrownell@users.sourceforge.net> ) Make ID-CS recognize the CF card manufacturer records for Samsung, Lexar and STI. Signed-off-by:
-
David Brownell authored
This adds a socket driver for the OMAP CF controller; it's currently in use on OSK boards. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Dominik Brodowski authored
config_t->Vpp1, Vpp2 and Vcc are never read, so remove them. Signed-off-by:
-
Dominik Brodowski authored
client_t and CLIENT_MAGIC are unused, so remove them Signed-off-by:
-
Daniel Ritz authored
extend cb_writel(), exca_writeb(), exca_writel() to do a read[lb]() after the write[lb]() to avoid possible problem with PCI write posting. Seems to fix Bug #5061. Signed-off-by:
Daniel Ritz <daniel.ritz@gmx.ch> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by:
-
Daniel Ritz authored
multifunction cards need to have the same irq assigned to both functions. the code tries that but fails because ret is still set to CS_IN_USE which results in the function having the CB irq assigned. yenta_set_socket then just changes the irq routing to use the PCI interrupt but the first functions irq handler is registered on an ISA interrupt. boom. Signed-off-by:
-
Daniel Ritz authored
- thread_done should only be completed when the wait_queue is installed. - all wake up conditions should be checked before schedule() this fixes a hang of rmmod in the sequence modprobe yenta_socket; rmmod yenta_socket as reported by Andreas Steinmetz. w/o this rmmod yenta_socket can hang on wait_for_completion() in pcmcia_unregister_socket() Signed-off-by:
-
Dominik Brodowski authored
Share code between setup-bus.c and yenta_socket.c: use the write-out code of resources to the bridge also in yenta_socket.c, as it provides useful debug output. In addition, it fixes the bug that the CPU-centric resource view might need to be transferred to the PCI-centric view: setup-bus.c does that, while yenta-socket.c did not. Signed-off-by:
-
Ingo Molnar authored
This patch reduces the stack footprint of pcmcia_device_query() from 416 bytes to 36 bytes. Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Marcelo Feitoza Parisi authored
Use of the time_after_eq() macro, defined at linux/jiffies.h, which deal with wrapping correctly and are nicer to read. Signed-off-by:
Marcelo Feitoza Parisi <marcelo@feitoza.com.br> Signed-off-by:
Domen Puncer <domen@coderock.org> Signed-off-by:
Johannes Stezenbach <js@linuxtv.org> Signed-off-by:
-
Philipp Matthias Hahn authored
Integrate saa7146_i2c adapter into device model: Moves entries from /sys/device/platform to /sys/device/pci*. Signed-off-by:
Philipp Hahn <pmhahn@titan.lahn.de> Signed-off-by:
-
Karl Herz authored
Add PCI-ids of Siemens-DVB-C card with Technotrend manufacturer id. Signed-off-by:
Karl Herz <karl.herz@gmx.de> Signed-off-by:
-
Oliver Endriss authored
Improved remote control support for av7110-based cards: o extended rc5 protocol, firmware >= 0x2620 required o key-up timer slightly adjusted o completely moved remote control code to av7110_ir.c o support for multiple ir receivers o for now, all av7110 cards share the same ir configuration and event device Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
Oliver Endriss authored
Disable COM_IF_LOCK workaround for firmware > 0x261f. Signed-off-by:
-
Johannes Stezenbach authored
Disable superflous firmware handshake. Signed-off-by:
-
Andrew de Quincey authored
Enable frontend on KNC plus cards. Signed-off-by:
Andrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by:
-
Andrew de Quincey authored
Fixes for CI interface. Signed-off-by:
-
Andrew de Quincey authored
Add support for TT DVB-C CI card. Signed-off-by:
-
thomas schorpp authored
Add support for analog video inputs (CVBS and Y/C) of the analog module for the Siemens DVB-C card. Signed-off-by:
thomas schorpp <t.schorpp@gmx.de> Signed-off-by:
-
Johannes Stezenbach authored
IR RC fixes: - EVIOCSKEYCODE is not supported by this driver, fix potential crash when it is used by not setting rc_input_dev->keycodesize - fix key repeat handling (hopefully) - reduce default poll internal to 50msec (necessary for key repeat handling) Signed-off-by:
-
Manu Abraham authored
Updated Documentation Signed-off-by:
Manu Abraham <manu@linuxtv.org> Signed-off-by:
-
Manu Abraham authored
Updated documentation Signed-off-by:
-
Manu Abraham authored
Fix BUG in DVB-C frequency setting. Thanks to Peng Cao <caopeng75@gmail.com> Signed-off-by:
-
Manu Abraham authored
Identify board properly: Add functions to retrieve MAC Address, FW details, Card type and Vendor Information. Signed-off-by:
-
Manu Abraham authored
Code Cleanup: o Remove debug noise o Remove debug module parameter debug level is achieved using the verbosity level o Updated to kernel coding style (case labels should not be indented) Signed-off-by:
-
Manu Abraham authored
Code Simplification: CA PMT object is not parsed in the driver anymore. Signed-off-by:
-
Manu Abraham authored
Make the Symbolrate setting card specific. Signed-off-by:
Manu Abraham <manu@kromtek.com> Signed-off-by:
-
Stuart Auchterlonie authored
Fix bug in Nebula DigiTV frontend detection for nxt6000. Signed-off-by:
Stuart Auchterlonie <stuarta@squashedfrog.net> Signed-off-by:
-
David Johnson authored
Add support for Nebula DigiTV PCI cards with the MT352 frontend. Signed-off-by:
David Johnson <dj@david-web.co.uk> Signed-off-by:
-
David Johnson authored
Indentation fixes and remove unnecessary braces. Signed-off-by:
-
Johannes Stezenbach authored
Endianness fix for risc DMA start address setting. (reported by Stefan Haubenthal/Peter Hettkamp) Signed-off-by:
-
Johannes Stezenbach authored
comment out noisy dprintk in dst_get_signal() (why are errors only visible with debug on? this needs to be cleaned up so we can disable debug by default) Signed-off-by:
-
Patrick Boettcher authored
This patch changes two things: 1) a firmware update made by the vendor, which has to be done in Windows for now, changes the DVB-data-pipe from isochronous to bulk: it fixes the data distortions (and thus the video-distortions) in DVB-T mode; there is no backwards compatibility with the old firmware as it didn't work anyway 2) with the help of Steve Toth some reverse-engineered functionality is now named correctly, thank you Signed-off-by:
Patrick Boettcher <pb@linuxtv.org> Signed-off-by:
-
Patrick Boettcher authored
white space cleanup Signed-off-by:
-
Svante Olofsson authored
Add support for the NXT6000-based digitv-box. Add .get_tune_settings callback for the NXT6000 to have a min_tune_delay of 500ms. Signed-off-by:
Svante Olofsson <svante@agentum.com> Signed-off-by:
-
Patrick Boettcher authored
Change the init call to optionally return the new dvb_usb_device directly. Signed-off-by:
-
Patrick Boettcher authored
Added names for clones of the DVB-T stick. Whitespace cleanups. Signed-off-by:
-
Ye Jianjun (Joey authored
Fix: copy frontend_ops before modifying Signed-off-by:
Ye Jianjun (Joey) <joeyye@trident.com.cn> Signed-off-by:
-
Andreas Oberritter authored
Removed empty module_init/exit calls. Signed-off-by:
Andreas Oberritter <obi@linuxtv.org> Signed-off-by:
-
