- 11 Jul, 2016 40 commits
-
-
Sara Sharon authored
[ Upstream commit d321cd01 ] When joining IBSS a full scan should be initiated in order to search for existing cell, unless the fixed_channel parameter was set. A default channel to create the IBSS on if no cell was found is provided as well. However - a scan is initiated only on the default channel provided regardless of whether ifibss->fixed_channel is set or not, with the obvious result of the cell not joining existing IBSS cell that is on another channel. Fixes: 76bed0f4 ("mac80211: IBSS fix scan request") Signed-off-by:
Sara Sharon <sara.sharon@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Sasha Levin <sasha.levin@oracle.com>
-
Arnd Bergmann authored
[ Upstream commit 0ef049dc ] When CONFIG_OPTIMIZE_INLINING is set, the sta_info_insert_finish function consumes more stack than normally, exceeding the 1024 byte limit on ARM: net/mac80211/sta_info.c: In function 'sta_info_insert_finish': net/mac80211/sta_info.c:561:1: error: the frame size of 1080 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] It turns out that there are two functions that put a 'struct station_info' on the stack: __sta_info_destroy_part2 and sta_info_insert_finish, and this structure alone requires up to 792 bytes. Hoping that both are called rarely enough, this replaces the on-stack structure with a dynamic allocation, which unfortunately requires some suboptimal error handling for out-of-memory. The __sta_info_destroy_part2 function is actually affected by the stack usage twice because it calls cfg80211_del_sta_sinfo(), which has another instance of struct station_info on its stack. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 98b62183 ("mac80211/cfg80211: add station events") Fixes: 6f7a8d26 ("mac80211: send statistics with delete station event") Signed-off-by:
-
Laurent Pinchart authored
[ Upstream commit f6acfcdc ] Commit 58f896d8 ("[media] v4l: vsp1: sru: Make the intensity controllable during streaming") refactored the stream start code and removed the SRU CTRL0 register write by mistake. Add it back. Fixes: 58f896d8 ("[media] v4l: vsp1: sru: Make the intensity controllable during streaming") Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Philipp Zabel authored
[ Upstream commit bc717d5e ] If we bail out this early, v4l2_device_register() has not been called yet, so no need to call v4l2_device_unregister(). Fixes: b7bd660a ("[media] coda: Call v4l2_device_unregister() from a single location") Reported-by:
Michael Olbrich <m.olbrich@pengutronix.de> Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
-
Linus Walleij authored
[ Upstream commit 6ee33455 ] Pull up was reported as pull down and vice versa. Fix this. Fixes: 8f1774a2 "pinctrl: nomadik: improve GPIO debug prints" Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
[ Upstream commit b6ee376c ] When creating an ip6tnl tunnel with ip tunnel, rtnl_link_ops is not set before ip6_tnl_create2 is called. When register_netdevice is called, there is no linkinfo attribute in the NEWLINK message because of that. Setting rtnl_link_ops before calling register_netdevice fixes that. Fixes: 0b112457 ("ip6tnl: add support of link creation via rtnl") Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Acked-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Haishuang Yan authored
[ Upstream commit be447f30 ] pskb_may_pull() can change skb->data, so we have to load ptr/optr at the right place. Signed-off-by:
Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by:
-
Haishuang Yan authored
[ Upstream commit 5745b823 ] pskb_may_pull() can change skb->data, so we have to load ptr/optr at the right place. Signed-off-by:
-
Nicolas Dichtel authored
[ Upstream commit c57c7a95 ] Size of the attribute IFLA_PHYS_PORT_NAME was missing. Fixes: db24a904 ("net: add support for phys_port_name") CC: David Ahern <dsahern@gmail.com> Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 2d421226 ] IPv6 counters updates use a different macro than IPv4. Fixes: 36cbb245 ("udp: Increment UDP_MIB_IGNOREDMULTI for arriving unmatched multicasts") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Rick Jones <rick.jones2@hp.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Bjørn Mork authored
[ Upstream commit e84810c7 ] Thomas reports: "Windows: 00 diagnostics 01 modem 02 at-port 03 nmea 04 nic Linux: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2001 ProdID=7e19 Rev=02.32 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage" Reported-by:
Thomas Schäfer <tschaefer@t-online.de> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
subashab@codeaurora.org authored
[ Upstream commit 071d36bf ] A crash is observed when a decrypted packet is processed in receive path. get_rps_cpus() tries to dereference the skb->dev fields but it appears that the device is freed from the poison pattern. [<ffffffc000af58ec>] get_rps_cpu+0x94/0x2f0 [<ffffffc000af5f94>] netif_rx_internal+0x140/0x1cc [<ffffffc000af6094>] netif_rx+0x74/0x94 [<ffffffc000bc0b6c>] xfrm_input+0x754/0x7d0 [<ffffffc000bc0bf8>] xfrm_input_resume+0x10/0x1c [<ffffffc000ba6eb8>] esp_input_done+0x20/0x30 [<ffffffc0000b64c8>] process_one_work+0x244/0x3fc [<ffffffc0000b7324>] worker_thread+0x2f8/0x418 [<ffffffc0000bb40c>] kthread+0xe0/0xec -013|get_rps_cpu( | dev = 0xFFFFFFC08B688000, | skb = 0xFFFFFFC0C76AAC00 -> ( | dev = 0xFFFFFFC08B688000 -> ( | name = "...................................................... | name_hlist = (next = 0xAAAAAAAAAAAAAAAA, pprev = 0xAAAAAAAAAAA Following are the sequence of events observed - - Encrypted packet in receive path from netdevice is queued - Encrypted packet queued for decryption (asynchronous) - Netdevice brought down and freed - Packet is decrypted and returned through callback in esp_input_done - Packet is queued again for process in network stack using netif_rx Since the device appears to have been freed, the dereference of skb->dev in get_rps_cpus() leads to an unhandled page fault exception. Fix this by holding on to device reference when queueing packets asynchronously and releasing the reference on call back return. v2: Make the change generic to xfrm as mentioned by Steffen and update the title to xfrm Suggested-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Jerome Stanislaus <jeromes@codeaurora.org> Signed-off-by:
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by:
-
Guillaume Nault authored
[ Upstream commit 1f461dcd ] Let channels hold a reference on their network namespace. Some channel types, like ppp_async and ppp_synctty, can have their userspace controller running in a different namespace. Therefore they can't rely on them to preclude their netns from being removed from under them. ================================================================== BUG: KASAN: use-after-free in ppp_unregister_channel+0x372/0x3a0 at addr ffff880064e217e0 Read of size 8 by task syz-executor/11581 ============================================================================= BUG net_namespace (Not tainted): kasan: bad access detected ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Allocated in copy_net_ns+0x6b/0x1a0 age=92569 cpu=3 pid=6906 [< none >] ___slab_alloc+0x4c7/0x500 kernel/mm/slub.c:2440 [< none >] __slab_alloc+0x4c/0x90 kernel/mm/slub.c:2469 [< inline >] slab_alloc_node kernel/mm/slub.c:2532 [< inline >] slab_alloc kernel/mm/slub.c:2574 [< none >] kmem_cache_alloc+0x23a/0x2b0 kernel/mm/slub.c:2579 [< inline >] kmem_cache_zalloc kernel/include/linux/slab.h:597 [< inline >] net_alloc kernel/net/core/net_namespace.c:325 [< none >] copy_net_ns+0x6b/0x1a0 kernel/net/core/net_namespace.c:360 [< none >] create_new_namespaces+0x2f6/0x610 kernel/kernel/nsproxy.c:95 [< none >] copy_namespaces+0x297/0x320 kernel/kernel/nsproxy.c:150 [< none >] copy_process.part.35+0x1bf4/0x5760 kernel/kernel/fork.c:1451 [< inline >] copy_process kernel/kernel/fork.c:1274 [< none >] _do_fork+0x1bc/0xcb0 kernel/kernel/fork.c:1723 [< inline >] SYSC_clone kernel/kernel/fork.c:1832 [< none >] SyS_clone+0x37/0x50 kernel/kernel/fork.c:1826 [< none >] entry_SYSCALL_64_fastpath+0x16/0x7a kernel/arch/x86/entry/entry_64.S:185 INFO: Freed in net_drop_ns+0x67/0x80 age=575 cpu=2 pid=2631 [< none >] __slab_free+0x1fc/0x320 kernel/mm/slub.c:2650 [< inline >] slab_free kernel/mm/slub.c:2805 [< none >] kmem_cache_free+0x2a0/0x330 kernel/mm/slub.c:2814 [< inline >] net_free kernel/net/core/net_namespace.c:341 [< none >] net_drop_ns+0x67/0x80 kernel/net/core/net_namespace.c:348 [< none >] cleanup_net+0x4e5/0x600 kernel/net/core/net_namespace.c:448 [< none >] process_one_work+0x794/0x1440 kernel/kernel/workqueue.c:2036 [< none >] worker_thread+0xdb/0xfc0 kernel/kernel/workqueue.c:2170 [< none >] kthread+0x23f/0x2d0 kernel/drivers/block/aoe/aoecmd.c:1303 [< none >] ret_from_fork+0x3f/0x70 kernel/arch/x86/entry/entry_64.S:468 INFO: Slab 0xffffea0001938800 objects=3 used=0 fp=0xffff880064e20000 flags=0x5fffc0000004080 INFO: Object 0xffff880064e20000 @offset=0 fp=0xffff880064e24200 CPU: 1 PID: 11581 Comm: syz-executor Tainted: G B 4.4.0+ Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014 00000000ffffffff ffff8800662c7790 ffffffff8292049d ffff88003e36a300 ffff880064e20000 ffff880064e20000 ffff8800662c77c0 ffffffff816f2054 ffff88003e36a300 ffffea0001938800 ffff880064e20000 0000000000000000 Call Trace: [< inline >] __dump_stack kernel/lib/dump_stack.c:15 [<ffffffff8292049d>] dump_stack+0x6f/0xa2 kernel/lib/dump_stack.c:50 [<ffffffff816f2054>] print_trailer+0xf4/0x150 kernel/mm/slub.c:654 [<ffffffff816f875f>] object_err+0x2f/0x40 kernel/mm/slub.c:661 [< inline >] print_address_description kernel/mm/kasan/report.c:138 [<ffffffff816fb0c5>] kasan_report_error+0x215/0x530 kernel/mm/kasan/report.c:236 [< inline >] kasan_report kernel/mm/kasan/report.c:259 [<ffffffff816fb4de>] __asan_report_load8_noabort+0x3e/0x40 kernel/mm/kasan/report.c:280 [< inline >] ? ppp_pernet kernel/include/linux/compiler.h:218 [<ffffffff83ad71b2>] ? ppp_unregister_channel+0x372/0x3a0 kernel/drivers/net/ppp/ppp_generic.c:2392 [< inline >] ppp_pernet kernel/include/linux/compiler.h:218 [<ffffffff83ad71b2>] ppp_unregister_channel+0x372/0x3a0 kernel/drivers/net/ppp/ppp_generic.c:2392 [< inline >] ? ppp_pernet kernel/drivers/net/ppp/ppp_generic.c:293 [<ffffffff83ad6f26>] ? ppp_unregister_channel+0xe6/0x3a0 kernel/drivers/net/ppp/ppp_generic.c:2392 [<ffffffff83ae18f3>] ppp_asynctty_close+0xa3/0x130 kernel/drivers/net/ppp/ppp_async.c:241 [<ffffffff83ae1850>] ? async_lcp_peek+0x5b0/0x5b0 kernel/drivers/net/ppp/ppp_async.c:1000 [<ffffffff82c33239>] tty_ldisc_close.isra.1+0x99/0xe0 kernel/drivers/tty/tty_ldisc.c:478 [<ffffffff82c332c0>] tty_ldisc_kill+0x40/0x170 kernel/drivers/tty/tty_ldisc.c:744 [<ffffffff82c34943>] tty_ldisc_release+0x1b3/0x260 kernel/drivers/tty/tty_ldisc.c:772 [<ffffffff82c1ef21>] tty_release+0xac1/0x13e0 kernel/drivers/tty/tty_io.c:1901 [<ffffffff82c1e460>] ? release_tty+0x320/0x320 kernel/drivers/tty/tty_io.c:1688 [<ffffffff8174de36>] __fput+0x236/0x780 kernel/fs/file_table.c:208 [<ffffffff8174e405>] ____fput+0x15/0x20 kernel/fs/file_table.c:244 [<ffffffff813595ab>] task_work_run+0x16b/0x200 kernel/kernel/task_work.c:115 [< inline >] exit_task_work kernel/include/linux/task_work.h:21 [<ffffffff81307105>] do_exit+0x8b5/0x2c60 kernel/kernel/exit.c:750 [<ffffffff813fdd20>] ? debug_check_no_locks_freed+0x290/0x290 kernel/kernel/locking/lockdep.c:4123 [<ffffffff81306850>] ? mm_update_next_owner+0x6f0/0x6f0 kernel/kernel/exit.c:357 [<ffffffff813215e6>] ? __dequeue_signal+0x136/0x470 kernel/kernel/signal.c:550 [<ffffffff8132067b>] ? recalc_sigpending_tsk+0x13b/0x180 kernel/kernel/signal.c:145 [<ffffffff81309628>] do_group_exit+0x108/0x330 kernel/kernel/exit.c:880 [<ffffffff8132b9d4>] get_signal+0x5e4/0x14f0 kernel/kernel/signal.c:2307 [< inline >] ? kretprobe_table_lock kernel/kernel/kprobes.c:1113 [<ffffffff8151d355>] ? kprobe_flush_task+0xb5/0x450 kernel/kernel/kprobes.c:1158 [<ffffffff8115f7d3>] do_signal+0x83/0x1c90 kernel/arch/x86/kernel/signal.c:712 [<ffffffff8151d2a0>] ? recycle_rp_inst+0x310/0x310 kernel/include/linux/list.h:655 [<ffffffff8115f750>] ? setup_sigcontext+0x780/0x780 kernel/arch/x86/kernel/signal.c:165 [<ffffffff81380864>] ? finish_task_switch+0x424/0x5f0 kernel/kernel/sched/core.c:2692 [< inline >] ? finish_lock_switch kernel/kernel/sched/sched.h:1099 [<ffffffff81380560>] ? finish_task_switch+0x120/0x5f0 kernel/kernel/sched/core.c:2678 [< inline >] ? context_switch kernel/kernel/sched/core.c:2807 [<ffffffff85d794e9>] ? __schedule+0x919/0x1bd0 kernel/kernel/sched/core.c:3283 [<ffffffff81003901>] exit_to_usermode_loop+0xf1/0x1a0 kernel/arch/x86/entry/common.c:247 [< inline >] prepare_exit_to_usermode kernel/arch/x86/entry/common.c:282 [<ffffffff810062ef>] syscall_return_slowpath+0x19f/0x210 kernel/arch/x86/entry/common.c:344 [<ffffffff85d88022>] int_ret_from_sys_call+0x25/0x9f kernel/arch/x86/entry/entry_64.S:281 Memory state around the buggy address: ffff880064e21680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff880064e21700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff880064e21780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff880064e21800: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff880064e21880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Fixes: 273ec51d ("net: ppp_generic - introduce net-namespace functionality v2") Reported-by:
Baozeng Ding <sploving1@gmail.com> Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Reviewed-by:
Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit ad0ea198 ] Currently, ingress ipv4 broadcast datagrams are dropped since, in udp_v4_early_demux(), ip_check_mc_rcu() is invoked even on bcast packets. This patch addresses the issue, invoking ip_check_mc_rcu() only for mcast packets. Fixes: 6e540309 ("ipv4/udp: Verify multicast group is ours in upd_v4_early_demux()") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit fe30937b ] bond_get_stats() can be called from rtnetlink (with RTNL held) or from /proc/net/dev seq handler (with RCU held) The logic added in commit 5f0c5f73 ("bonding: make global bonding stats more reliable") kind of assumed only one cpu could run there. If multiple threads are reading /proc/net/dev, stats can be really messed up after a while. A second problem is that some fields are 32bit, so we need to properly handle the wrap around problem. Given that RTNL is not always held, we need to use bond_for_each_slave_rcu(). Fixes: 5f0c5f73 ("bonding: make global bonding stats more reliable") Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit eee57723 ] When un-mapping skb->data in __bcmgenet_tx_reclaim(), we must use the length that was used in original dma_map_single(), instead of skb->len that might be bigger (includes the frags) We simply can store skb_len into tx_cb_ptr->dma_len and use it at unmap time. Fixes: 1c1008c7 ("net: bcmgenet: add main driver file") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Manish Chopra authored
[ Upstream commit 2c9a266a ] When running small packets [length < 256 bytes] traffic, packets were being dropped due to invalid data in those packets which were delivered by the driver upto the stack. Using pci_dma_sync_single_for_cpu ensures copying latest and updated data into skb from the receive buffer. Signed-off-by:
Sony Chacko <sony.chacko@qlogic.com> Signed-off-by:
Manish Chopra <manish.chopra@qlogic.com> Signed-off-by:
-
Guillaume Nault authored
[ Upstream commit e8e56ffd ] Locking ppp_mutex must be done before dereferencing file->private_data, otherwise it could be modified before ppp_unattached_ioctl() takes the lock. This could lead ppp_unattached_ioctl() to override ->private_data, thus leaking reference to the ppp_file previously pointed to. v2: lock all ppp_ioctl() instead of just checking private_data in ppp_unattached_ioctl(), to avoid ambiguous behaviour. Fixes: f3ff8a4d ("ppp: push BKL down into the driver") Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 83d6f1f1 ] Code that was added back in 2.6.38 has an obvious overflow when accessing a static array, and at the time it was added only a code comment was put in front of it as a reminder to have it reviewed properly. This has not happened, but gcc-6 now points to the specific overflow: drivers/net/wireless/ath/ath9k/eeprom.c: In function 'ath9k_hw_get_gain_boundaries_pdadcs': drivers/net/wireless/ath/ath9k/eeprom.c:483:44: error: array subscript is above array bounds [-Werror=array-bounds] maxPwrT4[i] = data_9287[idxL].pwrPdg[i][4]; ~~~~~~~~~~~~~~~~~~~~~~~~~^~~ It turns out that the correct array length exists in the local 'intercepts' variable of this function, so we can just use that instead of hardcoding '4', so this patch changes all three instances to use that variable. The other two instances were already correct, but it's more consistent this way. Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit e725a66c ] gcc-6 finds an out of bounds access in the fst_add_one function when calculating the end of the mmio area: drivers/net/wan/farsync.c: In function 'fst_add_one': drivers/net/wan/farsync.c:418:53: error: index 2 denotes an offset greater than size of 'u8[2][8192] {aka unsigned char[2][8192]}' [-Werror=array-bounds] #define BUF_OFFSET(X) (BFM_BASE + offsetof(struct buf_window, X)) ^ include/linux/compiler-gcc.h:158:21: note: in definition of macro '__compiler_offsetof' __builtin_offsetof(a, b) ^ drivers/net/wan/farsync.c:418:37: note: in expansion of macro 'offsetof' #define BUF_OFFSET(X) (BFM_BASE + offsetof(struct buf_window, X)) ^~~~~~~~ drivers/net/wan/farsync.c:2519:36: note: in expansion of macro 'BUF_OFFSET' + BUF_OFFSET ( txBuffer[i][NUM_TX_BUFFER][0]); ^~~~~~~~~~ The warning is correct, but not critical because this appears to be a write-only variable that is set by each WAN driver but never accessed afterwards. I'm taking the minimal fix here, using the correct pointer by pointing 'mem_end' to the last byte inside of the register area as all other WAN drivers do, rather than the first byte outside of it. An alternative would be to just remove the mem_end member entirely. Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit baefd701 ] The implementation of QP paravirtualization back in linux-3.7 included some code that looks very dubious, and gcc-6 has grown smart enough to warn about it: drivers/net/ethernet/mellanox/mlx4/resource_tracker.c: In function 'verify_qp_parameters': drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:3154:5: error: statement is indented as if it were guarded by... [-Werror=misleading-indentation] if (optpar & MLX4_QP_OPTPAR_ALT_ADDR_PATH) { ^~ drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:3144:4: note: ...this 'if' clause, but it is not if (slave != mlx4_master_func_num(dev)) >From looking at the context, I'm reasonably sure that the indentation is correct but that it should have contained curly braces from the start, as the update_gid() function in the same patch correctly does. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
[ Upstream commit 34b88a68 ] The syzkaller fuzzer hit the following use-after-free: Call Trace: [<ffffffff8175ea0e>] __asan_report_load8_noabort+0x3e/0x40 mm/kasan/report.c:295 [<ffffffff851cc31a>] __sys_recvmmsg+0x6fa/0x7f0 net/socket.c:2261 [< inline >] SYSC_recvmmsg net/socket.c:2281 [<ffffffff851cc57f>] SyS_recvmmsg+0x16f/0x180 net/socket.c:2270 [<ffffffff86332bb6>] entry_SYSCALL_64_fastpath+0x16/0x7a arch/x86/entry/entry_64.S:185 And, as Dmitry rightly assessed, that is because we can drop the reference and then touch it when the underlying recvmsg calls return some packets and then hit an error, which will make recvmmsg to set sock->sk->sk_err, oops, fix it. Reported-and-Tested-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Kostya Serebryany <kcc@google.com> Cc: Sasha Levin <sasha.levin@oracle.com> Fixes: a2e27255 ("net: Introduce recvmmsg socket syscall") http://lkml.kernel.org/r/20160122211644.GC2470@redhat.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
David S. Miller authored
[ Upstream commit fbd40ea0 ] When an inetdev is destroyed, every address assigned to the interface is removed. And in this scenerio we do two pointless things which can be very expensive if the number of assigned interfaces is large: 1) Address promotion. We are deleting all addresses, so there is no point in doing this. 2) A full nf conntrack table purge for every address. We only need to do this once, as is already caught by the existing masq_dev_notifier so masq_inet_event() can skip this. Reported-by:
Solar Designer <solar@openwall.com> Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 8e2ad411 ] The stack expects link layer headers in the skb linear section. Macvtap can create skbs with llheader in frags in edge cases: when (IFF_VNET_HDR is off or vnet_hdr.hdr_len < ETH_HLEN) and prepad + len > PAGE_SIZE and vnet_hdr.flags has no or bad csum. Add checks to ensure linear is always at least ETH_HLEN. At this point, len is already ensured to be >= ETH_HLEN. For backwards compatiblity, rounds up short vnet_hdr.hdr_len. This differs from tap and packet, which return an error. Fixes b9fb9ee0 ("macvtap: add GSO/csum offload support") Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Rajesh Borundia authored
[ Upstream commit 819bfe76 ] o While the driver is in the middle of a MB completion processing and it receives a spurious MB interrupt, it is mistaken as a good MB completion interrupt leading to premature completion of the next MB request. Fix the driver to guard against this by checking the current state of MB processing and ignore the spurious interrupt. Also added a stats counter to record this condition. Signed-off-by:
Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by:
-
Rajesh Borundia authored
[ Upstream commit 5bf93251 ] o atomic_t usage is incorrect as we are not implementing any atomicity. Signed-off-by:
-
Sergei Shtylyov authored
[ Upstream commit ab857916 ] Both Renesas R-Car and RZ/A1 manuals state that RX buffer length must be a multiple of 32 bytes, while the driver only uses 16 byte granularity... Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Sergei Shtylyov authored
[ Upstream commit c1b7fca6 ] In a low memory situation, if netdev_alloc_skb() fails on a first RX ring loop iteration in sh_eth_ring_format(), 'rxdesc' is still NULL. Avoid kernel oops by adding the 'rxdesc' check after the loop. Reported-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 9ed988cd ] Replace link layer header validation check ll_header_truncate with more generic dev_validate_header. Validation based on hard_header_len incorrectly drops valid packets in variable length protocols, such as AX25. dev_validate_header calls header_ops.validate for such protocols to ensure correctness below hard_header_len. See also http://comments.gmane.org/gmane.linux.network/401064 Fixes 9c707762 ("packet: make packet_snd fail on len smaller than l2 header") Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit ea47781c ] As variable length protocol, AX25 fails link layer header validation tests based on a minimum length. header_ops.validate allows protocols to validate headers that are shorter than hard_header_len. Implement this callback for AX25. See also http://comments.gmane.org/gmane.linux.network/401064Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 2793a23a ] Netdevice parameter hard_header_len is variously interpreted both as an upper and lower bound on link layer header length. The field is used as upper bound when reserving room at allocation, as lower bound when validating user input in PF_PACKET. Clarify the definition to be maximum header length. For validation of untrusted headers, add an optional validate member to header_ops. Allow bypassing of validation by passing CAP_SYS_RAWIO, for instance for deliberate testing of corrupt input. In this case, pad trailing bytes, as some device drivers expect completely initialized headers. See also http://comments.gmane.org/gmane.linux.network/401064Signed-off-by:
-
Martin Blumenstingl authored
[ Upstream commit 880621c2 ] Commit 9c707762 ("packet: make packet_snd fail on len smaller than l2 header") added validation for the packet size in packet_snd. This change enforces that every packet needs a header (with at least hard_header_len bytes) plus a payload with at least one byte. Before this change the payload was optional. This fixes PPPoE connections which do not have a "Service" or "Host-Uniq" configured (which is violating the spec, but is still widely used in real-world setups). Those are currently failing with the following message: "pppd: packet size is too short (24 <= 24)" Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
-
Bill Sommerfeld authored
[ Upstream commit 59dca1d8 ] IPv4 interprets a negative return value from a protocol handler as a request to redispatch to a new protocol. In contrast, IPv6 interprets a negative value as an error, and interprets a positive value as a request for redispatch. UDP for IPv6 was unaware of this difference. Change __udp6_lib_rcv() to return a positive value for redispatch. Note that the socket's encap_rcv hook still needs to return a negative value to request dispatch, and in the case of IPv6 packets, adjust IP6CB(skb)->nhoff to identify the byte containing the next protocol. Signed-off-by:
Bill Sommerfeld <wsommerfeld@google.com> Signed-off-by:
-
Oliver Neukum authored
[ Upstream commit 1666984c ] In case bind() works, but a later error forces bailing in probe() in error cases work and a timer may be scheduled. They must be killed. This fixes an error case related to the double free reported in http://www.spinics.net/lists/netdev/msg367669.html and needs to go on top of Linus' fix to cdc-ncm. Signed-off-by:
Oliver Neukum <ONeukum@suse.com> Signed-off-by:
-
Bjørn Mork authored
[ Upstream commit 48906f62 ] Some devices will silently fail setup unless they are reset first. This is necessary even if the data interface is already in altsetting 0, which it will be when the device is probed for the first time. Briefly toggling the altsetting forces a function reset regardless of the initial state. This fixes a setup problem observed on a number of Huawei devices, appearing to operate in NTB-32 mode even if we explicitly set them to NTB-16 mode. Signed-off-by:
-
Florian Westphal authored
[ Upstream commit 5d150a98 ] When ipv6_find_hdr is used to find a fragment header (caller specifies target NEXTHDR_FRAGMENT) we erronously return -ENOENT for all fragments with nonzero offset. Before commit 9195bb8e, when target was specified, we did not enter the exthdr walk loop as nexthdr == target so this used to work. Now we do (so we can skip empty route headers). When we then stumble upon a frag with nonzero frag_off we must return -ENOENT ("header not found") only if the caller did not specifically request NEXTHDR_FRAGMENT. This allows nfables exthdr expression to match ipv6 fragments, e.g. via nft add rule ip6 filter input frag frag-off gt 0 Fixes: 9195bb8e ("ipv6: improve ipv6_find_hdr() to skip empty routing headers") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Bjørn Mork authored
[ Upstream commit bf13c94c ] The MC74xx and EM74xx modules use different IDs by default, according to the Lenovo EM7455 driver for Windows. Signed-off-by:
-
Benjamin Poirier authored
[ Upstream commit 1837b2e2 ] The current reserved_tailroom calculation fails to take hlen and tlen into account. skb: [__hlen__|__data____________|__tlen___|__extra__] ^ ^ head skb_end_offset In this representation, hlen + data + tlen is the size passed to alloc_skb. "extra" is the extra space made available in __alloc_skb because of rounding up by kmalloc. We can reorder the representation like so: [__hlen__|__data____________|__extra__|__tlen___] ^ ^ head skb_end_offset The maximum space available for ip headers and payload without fragmentation is min(mtu, data + extra). Therefore, reserved_tailroom = data + extra + tlen - min(mtu, data + extra) = skb_end_offset - hlen - min(mtu, skb_end_offset - hlen - tlen) = skb_tailroom - min(mtu, skb_tailroom - tlen) ; after skb_reserve(hlen) Compare the second line to the current expression: reserved_tailroom = skb_end_offset - min(mtu, skb_end_offset) and we can see that hlen and tlen are not taken into account. The min() in the third line can be expanded into: if mtu < skb_tailroom - tlen: reserved_tailroom = skb_tailroom - mtu else: reserved_tailroom = tlen Depending on hlen, tlen, mtu and the number of multicast address records, the current code may output skbs that have less tailroom than dev->needed_tailroom or it may output more skbs than needed because not all space available is used. Fixes: 4c672e4b ("ipv6: mld: fix add_grhead skb_over_panic for devs with large MTUs") Signed-off-by:
Benjamin Poirier <bpoirier@suse.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Xin Long authored
[ Upstream commit 40b4f0fd ] As the member .cmp_addr of sctp_af_inet6, sctp_v6_cmp_addr should also check the port of addresses, just like sctp_v4_cmp_addr, cause it's invoked by sctp_cmp_addr_exact(). Now sctp_v6_cmp_addr just check the port when two addresses have different family, and lack the port check for two ipv6 addresses. that will make sctp_hash_cmp() cannot work well. so fix it by adding ports comparison in sctp_v6_cmp_addr(). Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Stefan Wahren authored
[ Upstream commit a4690afe ] ether_setup sets IFF_TX_SKB_SHARING but this is not supported by qca_spi as it modifies the skb on xmit. Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Fixes: 291ab06e (net: qualcomm: new Ethernet over SPI driver for QCA7000) Signed-off-by:
-
