- 13 Nov, 2018 40 commits
-
-
Viresh Kumar authored
[ Upstream commit 51c99dd2 ] We can not call dev_pm_opp_of_cpumask_remove_table() freely anymore since the latest OPP core updates as that uses reference counting to free resources. There are cases where no static OPPs are added (using DT) for a platform and trying to remove the OPP table may end up decrementing refcount which is already zero and hence generating warnings. Lets track if we were able to add static OPPs or not and then only remove the table based on that. Some reshuffling of code is also done to do that. Reported-by:
Niklas Cassel <niklas.cassel@linaro.org> Tested-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dou Liyang authored
[ Upstream commit d0381bf4 ] ACPI driver should make sure all the processor IDs in their ACPI Namespace are unique. the driver performs a depth-first walk of the namespace tree and calls the acpi_processor_ids_walk() to check the duplicate IDs. But, the acpi_processor_ids_walk() mistakes the return value. If a processor is checked, it returns true which causes the walk break immediately, and other processors will never be checked. Repace the value with AE_OK which is the standard acpi_status value. And don't abort the namespace walk even on error. Fixes: 8c8cb30f (acpi/processor: Implement DEVICE operator for processor enumeration) Signed-off-by:
Dou Liyang <douly.fnst@cn.fujitsu.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Lubomir Rintel authored
[ Upstream commit d92116b8 ] On OLPC XO-1, the RTC is discovered via device tree from the arch initcall. Don't let the PC platform register another one from its device initcall, it's not going to work: sysfs: cannot create duplicate filename '/devices/platform/rtc_cmos' CPU: 0 PID: 1 Comm: swapper Not tainted 4.19.0-rc6 #12 Hardware name: OLPC XO/XO, BIOS OLPC Ver 1.00.01 06/11/2014 Call Trace: dump_stack+0x16/0x18 sysfs_warn_dup+0x46/0x58 sysfs_create_dir_ns+0x76/0x9b kobject_add_internal+0xed/0x209 ? __schedule+0x3fa/0x447 kobject_add+0x5b/0x66 device_add+0x298/0x535 ? insert_resource_conflict+0x2a/0x3e platform_device_add+0x14d/0x192 ? io_delay_init+0x19/0x19 platform_device_register+0x1c/0x1f add_rtc_cmos+0x16/0x31 do_one_initcall+0x78/0x14a ? do_early_param+0x75/0x75 kernel_init_freeable+0x152/0x1e0 ? rest_init+0xa2/0xa2 kernel_init+0x8/0xd5 ret_from_fork+0x2e/0x38 kobject_add_internal failed for rtc_cmos with -EEXIST, don't try to register things with the same name in the same directory. platform rtc_cmos: registered platform RTC device (no PNP device found) Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Signed-off-by:
Borislav Petkov <bp@suse.de> Acked-by:
Thomas Gleixner <tglx@linutronix.de> CC: "H. Peter Anvin" <hpa@zytor.com> CC: Ingo Molnar <mingo@redhat.com> CC: x86-ml <x86@kernel.org> Link: http://lkml.kernel.org/r/20181004160808.307738-1-lkundrak@v3.skSigned-off-by:
-
Emmanuel Grumbach authored
[ Upstream commit 155f7e04 ] Fix a bug that happens in the following scenario: 1) suspend without WoWLAN 2) mac80211 calls drv_stop because of the suspend 3) __iwl_mvm_mac_stop deallocates the aux station 4) during drv_stop the firmware crashes 5) iwlmvm: * sets IWL_MVM_STATUS_HW_RESTART_REQUESTED * asks mac80211 to kick the restart flow 6) mac80211 puts the restart worker into a freezable queue which means that the worker will not run for now since the workqueue is already frozen 7) ... 8) resume 9) mac80211 runs ieee80211_reconfig as part of the resume 10) mac80211 detects that a restart flow has been requested and that we are now resuming from suspend and cancels the restart worker 11) mac80211 calls drv_start() 12) __iwl_mvm_mac_start checks that IWL_MVM_STATUS_HW_RESTART_REQUESTED clears it, sets IWL_MVM_STATUS_IN_HW_RESTART and calls iwl_mvm_restart_cleanup() 13) iwl_fw_error_dump gets called and accesses the device to get debug data 14) iwl_mvm_up adds the aux station 15) iwl_mvm_add_aux_sta() allocates an internal station for the aux station 16) iwl_mvm_allocate_int_sta() tests IWL_MVM_STATUS_IN_HW_RESTART and doesn't really allocate a station ID for the aux station 17) a new queue is added for the aux station Note that steps from 5 to 9 aren't really part of the problem but were described for the sake of completeness. Once the iwl_mvm_mac_stop() is called, the device is not accessible, meaning that step 12) can't succeed and we'll see the following: drivers/net/wireless/intel/iwlwifi/pcie/trans.c:2122 iwl_trans_pcie_grab_nic_access+0xc0/0x1d6 [iwlwifi]() Timeout waiting for hardware access (CSR_GP_CNTRL 0x080403d8) Call Trace: [<ffffffffc03e6ad3>] iwl_trans_pcie_grab_nic_access+0xc0/0x1d6 [iwlwifi] [<ffffffffc03e6a13>] iwl_trans_pcie_dump_regs+0x3fd/0x3fd [iwlwifi] [<ffffffffc03dad42>] iwl_fw_error_dump+0x4f5/0xe8b [iwlwifi] [<ffffffffc04bd43e>] __iwl_mvm_mac_start+0x5a/0x21a [iwlmvm] [<ffffffffc04bd6d2>] iwl_mvm_mac_start+0xd4/0x103 [iwlmvm] [<ffffffffc042d378>] drv_start+0xa1/0xc5 [iwl7000_mac80211] [<ffffffffc045a339>] ieee80211_reconfig+0x145/0xf50 [mac80211] [<ffffffffc044788b>] ieee80211_resume+0x62/0x66 [mac80211] [<ffffffffc0366c5b>] wiphy_resume+0xa9/0xc6 [cfg80211] The station id of the aux station is set to 0xff in step 3 and because we don't really allocate a new station id for the auxliary station (as explained in 16), we end up sending a command to the firmware asking to connect the queue to station id 0xff. This makes the firmware crash with the following information: 0x00002093 | ADVANCED_SYSASSERT 0x000002F0 | trm_hw_status0 0x00000000 | trm_hw_status1 0x00000B38 | branchlink2 0x0001978C | interruptlink1 0x00000000 | interruptlink2 0xFF080501 | data1 0xDEADBEEF | data2 0xDEADBEEF | data3 Firmware error during reconfiguration - reprobe! FW error in SYNC CMD SCD_QUEUE_CFG Fix this by clearing IWL_MVM_STATUS_HW_RESTART_REQUESTED in iwl_mvm_mac_stop(). We won't be able to collect debug data anyway and when we will brought up again, we will have a clean state from the firmware perspective. Since we won't have IWL_MVM_STATUS_IN_HW_RESTART set in step 12) we won't get to the 2093 ASSERT either. Fixes: bf8b286f ("iwlwifi: mvm: defer setting IWL_MVM_STATUS_IN_HW_RESTART") Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Shaul Triebitz authored
[ Upstream commit 868a1e86 ] If all free RB queues are empty, the driver will never restock the free RB queue. That's because the restocking happens in the Rx flow, and if the free queue is empty there will be no Rx. Although there's a background worker (a.k.a. allocator) allocating memory for RBs so that the Rx handler can restock them, the worker may run only after the free queue has become empty (and then it is too late for restocking as explained above). There is a solution for that called 'emergency': If the number of used RB's reaches half the amount of all RB's, the Rx handler will not wait for the allocator but immediately allocate memory for the used RB's and restock the free queue. But, since the used RB's is per queue, it may happen that the used RB's are spread between the queues such that the emergency check will fail for each of the queues (and still run out of RBs, causing the above symptom). To fix it, move to emergency mode if the sum of *all* used RBs (for all Rx queues) reaches half the amount of all RB's Signed-off-by:
Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by:
-
Yu Zhao authored
[ Upstream commit 51698949 ] This device reports SDHCI_CLOCK_INT_STABLE even though it's not ready to take SDHCI_CLOCK_CARD_EN. The symptom is that reading SDHCI_CLOCK_CONTROL after enabling the clock shows absence of the bit from the register (e.g. expecting 0x0000fa07 = 0x0000fa03 | SDHCI_CLOCK_CARD_EN but only observed the first operand). mmc1: Timeout waiting for hardware cmd interrupt. mmc1: sdhci: ============ SDHCI REGISTER DUMP =========== mmc1: sdhci: Sys addr: 0x00000000 | Version: 0x00000603 mmc1: sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000 mmc1: sdhci: Argument: 0x00000000 | Trn mode: 0x00000000 mmc1: sdhci: Present: 0x01ff0001 | Host ctl: 0x00000001 mmc1: sdhci: Power: 0x0000000f | Blk gap: 0x00000000 mmc1: sdhci: Wake-up: 0x00000000 | Clock: 0x0000fa03 mmc1: sdhci: Timeout: 0x00000000 | Int stat: 0x00000000 mmc1: sdhci: Int enab: 0x00ff0083 | Sig enab: 0x00ff0083 mmc1: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 mmc1: sdhci: Caps: 0x25fcc8bf | Caps_1: 0x00002077 mmc1: sdhci: Cmd: 0x00000000 | Max curr: 0x005800c8 mmc1: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x00000000 mmc1: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000 mmc1: sdhci: Host ctl2: 0x00000008 mmc1: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000 mmc1: sdhci: ============================================ The problem happens during wakeup from S3. Adding a delay quirk after power up reliably fixes the problem. Signed-off-by:
Yu Zhao <yuzhao@google.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Prarit Bhargava authored
[ Upstream commit f69ffc5d ] cpupower crashes on VMWare guests. The guests have the AMD PStateDef MSR (0xC0010064 + state number) set to zero. As a result fid and did are zero and the crash occurs because of a divide by zero (cof = fid/did). This can be prevented by checking the enable bit in the PStateDef MSR before calculating cof. By doing this the value of pstate[i] remains zero and the value can be tested before displaying the active Pstates. Check the enable bit in the PstateDef register for all supported families and only print out enabled Pstates. Signed-off-by:
Prarit Bhargava <prarit@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Stafford Horne <shorne@gmail.com> Signed-off-by:
Shuah Khan (Samsung OSG) <shuah@kernel.org> Signed-off-by:
-
Sanskriti Sharma authored
[ Upstream commit ce49d843 ] Ensure that all code paths in strbuf_addv() call va_end() on the ap_saved copy that was made. Fixes the following coverity complaint: Error: VARARGS (CWE-237): [#def683] tools/perf/util/strbuf.c:106: missing_va_end: va_end was not called for "ap_saved". Signed-off-by:
Sanskriti Sharma <sansharm@redhat.com> Reviewed-by:
Jiri Olsa <jolsa@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Link: http://lkml.kernel.org/r/1538490554-8161-2-git-send-email-sansharm@redhat.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Sanskriti Sharma authored
[ Upstream commit faedbf3f ] Free tracing_data structure in tracing_data_get() error paths. Fixes the following coverity complaint: Error: RESOURCE_LEAK (CWE-772): leaked_storage: Variable "tdata" going out of scope leaks the storage Signed-off-by:
-
Sanskriti Sharma authored
[ Upstream commit 1e44224f ] For each system in a given pevent, read_event_files() reads in a temporary 'sys' string. Be sure to free this string before moving onto to the next system and/or leaving read_event_files(). Fixes the following coverity complaints: Error: RESOURCE_LEAK (CWE-772): tools/perf/util/trace-event-read.c:343: overwrite_var: Overwriting "sys" in "sys = read_string()" leaks the storage that "sys" points to. tools/perf/util/trace-event-read.c:353: leaked_storage: Variable "sys" going out of scope leaks the storage it points to. Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit a1108c7b ] Clang warns when one enumerated type is implicitly converted to another. drivers/spi/spi-ep93xx.c:342:62: warning: implicit conversion from enumeration type 'enum dma_transfer_direction' to different enumeration type 'enum dma_data_direction' [-Wenum-conversion] nents = dma_map_sg(chan->device->dev, sgt->sgl, sgt->nents, dir); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~ ./include/linux/dma-mapping.h:428:58: note: expanded from macro 'dma_map_sg' #define dma_map_sg(d, s, n, r) dma_map_sg_attrs(d, s, n, r, 0) ~~~~~~~~~~~~~~~~ ^ drivers/spi/spi-ep93xx.c:348:57: warning: implicit conversion from enumeration type 'enum dma_transfer_direction' to different enumeration type 'enum dma_data_direction' [-Wenum-conversion] dma_unmap_sg(chan->device->dev, sgt->sgl, sgt->nents, dir); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~ ./include/linux/dma-mapping.h:429:62: note: expanded from macro 'dma_unmap_sg' #define dma_unmap_sg(d, s, n, r) dma_unmap_sg_attrs(d, s, n, r, 0) ~~~~~~~~~~~~~~~~~~ ^ drivers/spi/spi-ep93xx.c:377:56: warning: implicit conversion from enumeration type 'enum dma_transfer_direction' to different enumeration type 'enum dma_data_direction' [-Wenum-conversion] dma_unmap_sg(chan->device->dev, sgt->sgl, sgt->nents, dir); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~ ./include/linux/dma-mapping.h:429:62: note: expanded from macro 'dma_unmap_sg' #define dma_unmap_sg(d, s, n, r) dma_unmap_sg_attrs(d, s, n, r, 0) ~~~~~~~~~~~~~~~~~~ ^ 3 warnings generated. dma_{,un}map_sg expect an enum of type dma_data_direction but this driver uses dma_transfer_direction for everything. Convert the driver to use dma_data_direction for these two functions. There are two places that strictly require an enum of type dma_transfer_direction: the direction member in struct dma_slave_config and the direction parameter in dmaengine_prep_slave_sg. To avoid using an explicit cast, add a simple function, ep93xx_dma_data_to_trans_dir, to safely map between the two types because they are not 1 to 1 in meaning. Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Reviewed-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Jia-Ju Bai authored
[ Upstream commit 7325b4bb ] The driver may sleep with holding a spinlock. The function call paths (from bottom to top) in Linux-4.16 are: [FUNC] nvm_dev_dma_alloc(GFP_KERNEL) drivers/lightnvm/pblk-core.c, 754: nvm_dev_dma_alloc in pblk_line_submit_smeta_io drivers/lightnvm/pblk-core.c, 1048: pblk_line_submit_smeta_io in pblk_line_init_bb drivers/lightnvm/pblk-core.c, 1434: pblk_line_init_bb in pblk_line_replace_data drivers/lightnvm/pblk-recovery.c, 980: pblk_line_replace_data in pblk_recov_l2p drivers/lightnvm/pblk-recovery.c, 976: spin_lock in pblk_recov_l2p [FUNC] bio_map_kern(GFP_KERNEL) drivers/lightnvm/pblk-core.c, 762: bio_map_kern in pblk_line_submit_smeta_io drivers/lightnvm/pblk-core.c, 1048: pblk_line_submit_smeta_io in pblk_line_init_bb drivers/lightnvm/pblk-core.c, 1434: pblk_line_init_bb in pblk_line_replace_data drivers/lightnvm/pblk-recovery.c, 980: pblk_line_replace_data in pblk_recov_l2p drivers/lightnvm/pblk-recovery.c, 976: spin_lock in pblk_recov_l2p To fix these bugs, the call to pblk_line_replace_data() is moved out of the spinlock protection. These bugs are found by my static analysis tool DSAC. Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by:
Javier González <javier@cnexlabs.com> Signed-off-by:
Matias Bjørling <mb@lightnvm.io> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Thierry Reding authored
[ Upstream commit 95dcd64b ] Technically this is not required because disabling the PWM should be enough. However, when support for atomic operations was implemented in the PWM subsystem, only actual changes to the PWM channel are applied during pwm_config(), which means that during after resume from suspend the old settings won't be applied. One possible solution is for the PWM driver to implement its own PM operations such that settings from before suspend get applied on resume. This has the disadvantage of completely ignoring any particular ordering requirements that PWM user drivers might have, so it is best to leave it up to the user drivers to apply the settings that they want at the appropriate time. Another way to solve this would be to read back the current state of the PWM at the time of resume. That way, in case the configuration was lost during suspend, applying the old settings in PWM user drivers would actually get them applied because they differ from the current settings. However, not all PWM drivers support reading the hardware state, and not all hardware may support it. The best workaround at this point seems to be to let PWM user drivers tell the PWM subsystem that the PWM is turned off by, in addition to disabling it, also setting the duty cycle to 0. This causes the resume operation to apply a configuration that is different from the current configuration, resulting in the proper state from before suspend getting restored. Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Janosch Frank authored
[ Upstream commit b5130dc2 ] When running as a level 3 guest with no host provided sthyi support sclp_ocf_cpc_name_copy() will only return zeroes. Zeroes are not a valid group name, so let's not indicate that the group name field is valid. Also the group name is not dependent on stsi, let's not return based on stsi before setting it. Fixes: 95ca2cb5 ("KVM: s390: Add sthyi emulation") Signed-off-by:
Janosch Frank <frankja@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Serhey Popovych authored
[ Upstream commit df52eab2 ] Configuring generic network device parameters on tun will fail in presence of IFLA_INFO_KIND attribute in IFLA_LINKINFO nested attribute since tun_validate() always return failure. This can be visualized with following ip-link(8) command sequences: # ip link set dev tun0 group 100 # ip link set dev tun0 group 100 type tun RTNETLINK answers: Invalid argument with contrast to dummy and veth drivers: # ip link set dev dummy0 group 100 # ip link set dev dummy0 type dummy # ip link set dev veth0 group 100 # ip link set dev veth0 group 100 type veth Fix by returning zero in tun_validate() when @data is NULL that is always in case since rtnl_link_ops->maxtype is zero in tun driver. Fixes: f019a7a5 ("tun: Implement ip link del tunXXX") Signed-off-by:
Serhey Popovych <serhe.popovych@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Ryan C Goodfellow authored
[ Upstream commit 5948185b ] This commit makes it possible to use devlink to split the 100G CXP Netronome into two 40G interfaces. Currently when you ask for 2 interfaces, the math in src/nfp_devlink.c:nfp_devlink_port_split calculates that you want 5 lanes per port because for some reason eth_port.port_lanes=10 (shouldn't this be 12 for CXP?). What we really want when asking for 2 breakout interfaces is 4 lanes per port. This commit makes that happen by calculating based on 8 lanes if 10 are present. Signed-off-by:
Ryan C Goodfellow <rgoodfel@isi.edu> Reviewed-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Greg Weeks <greg.weeks@netronome.com> Signed-off-by:
-
Omar Sandoval authored
[ Upstream commit 1448a2a5 ] If we fail to allocate the request queue for a disk, we still need to free that disk, not just the previous ones. Additionally, we need to cleanup the previous request queues. Signed-off-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
-
Omar Sandoval authored
[ Upstream commit 71327f54 ] Move queue allocation next to disk allocation to fix a couple of issues: - If add_disk() hasn't been called, we should clear disk->queue before calling put_disk(). - If we fail to allocate a request queue, we still need to put all of the disks, not just the ones that we allocated queues for. Signed-off-by:
-
Waiman Long authored
[ Upstream commit 9506a742 ] It was found that when debug_locks was turned off because of a problem found by the lockdep code, the system performance could drop quite significantly when the lock_stat code was also configured into the kernel. For instance, parallel kernel build time on a 4-socket x86-64 server nearly doubled. Further analysis into the cause of the slowdown traced back to the frequent call to debug_locks_off() from the __lock_acquired() function probably due to some inconsistent lockdep states with debug_locks off. The debug_locks_off() function did an unconditional atomic xchg to write a 0 value into debug_locks which had already been set to 0. This led to severe cacheline contention in the cacheline that held debug_locks. As debug_locks is being referenced in quite a few different places in the kernel, this greatly slow down the system performance. To prevent that trashing of debug_locks cacheline, lock_acquired() and lock_contended() now checks the state of debug_locks before proceeding. The debug_locks_off() function is also modified to check debug_locks before calling __debug_locks_off(). Signed-off-by:
Waiman Long <longman@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/1539913518-15598-1-git-send-email-longman@redhat.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Wolfram Sang authored
[ Upstream commit 31d86033 ] DMA needs to be cleaned up not only on timeout, but on all errors where it has been setup before. Fixes: 73e8b052 ("i2c: rcar: add DMA support") Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Masami Hiramatsu authored
[ Upstream commit ba0e41ca ] Add a testcase to check the syntax and field types for synthetic_events interface. Link: http://lkml.kernel.org/r/153986838264.18251.16627517536956299922.stgit@devboxAcked-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit 8c3bf9b6 ] Clang currently warns: drivers/net/ethernet/qlogic/qla3xxx.c:384:24: warning: signed shift result (0xF00000000) requires 37 bits to represent, but 'int' only has 32 bits [-Wshift-overflow] ((ISP_NVRAM_MASK << 16) | qdev->eeprom_cmd_data)); ~~~~~~~~~~~~~~ ^ ~~ 1 warning generated. The warning is certainly accurate since ISP_NVRAM_MASK is defined as (0x000F << 16) which is then shifted by 16, resulting in 64424509440, well above UINT_MAX. Given that this is the only location in this driver where ISP_NVRAM_MASK is shifted again, it seems likely that ISP_NVRAM_MASK was originally defined without a shift and during the move of the shift to the definition, this statement wasn't properly removed (since ISP_NVRAM_MASK is used in the statenent right above this). Only the maintainers can confirm this since this statment has been here since the driver was first added to the kernel. Link: https://github.com/ClangBuiltLinux/linux/issues/127Signed-off-by:
-
Sebastian Andrzej Siewior authored
[ Upstream commit 6aa67676 ] Commit: c5bedc68 ("x86/fpu: Get rid of PF_USED_MATH usage, convert it to fpu->fpstate_active") introduced the 'fpu' variable at top of __restore_xstate_sig(), which now shadows the other definition: arch/x86/kernel/fpu/signal.c:318:28: warning: symbol 'fpu' shadows an earlier one arch/x86/kernel/fpu/signal.c:271:20: originally declared here Remove the shadowed definition of 'fpu', as the two definitions are the same. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by:
Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: c5bedc68 ("x86/fpu: Get rid of PF_USED_MATH usage, convert it to fpu->fpstate_active") Link: http://lkml.kernel.org/r/20181016202525.29437-3-bigeasy@linutronix.deSigned-off-by:
-
David Miller authored
[ Upstream commit 0ed149cf ] The size of the resulting cpu map can be smaller than a multiple of sizeof(u64), resulting in SIGBUS on cpus like Sparc as the next event will not be aligned properly. Signed-off-by:
-
Jarod Wilson authored
[ Upstream commit 36b8d462 ] When a build is run from something like a cron job, the user's $PATH is rather minimal, of note, not including /usr/sbin in my own case. Because of that, an automated rpm package build ultimately fails to find libperf-jvmti.so, because somewhere within the build, this happens... /bin/sh: alternatives: command not found /bin/sh: alternatives: command not found Makefile.config:849: No openjdk development package found, please install JDK package, e.g. openjdk-8-jdk, java-1.8.0-openjdk-devel ...and while the build continues, libperf-jvmti.so isn't built, and things fall down when rpm tries to find all the %files specified. Exact same system builds everything just fine when the job is launched from a login shell instead of a cron job, since alternatives is in $PATH, so openjdk is actually found. The test required to get into this section of code actually specifies the full path, as does a block just above it, so let's do that here too. Signed-off-by:
Jarod Wilson <jarod@redhat.com> Acked-by:
Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: William Cohen <wcohen@redhat.com> Fixes: d4dfdf00 ("perf jvmti: Plug compilation into perf build") Link: http://lkml.kernel.org/r/20180906221812.11167-1-jarod@redhat.comSigned-off-by:
-
Song Muchun authored
[ Upstream commit 9845c49c ] The comment and the code around the update_min_vruntime() call in dequeue_entity() are not in agreement. >From commit: b60205c7 ("sched/fair: Fix min_vruntime tracking") I think that we want to update min_vruntime when a task is sleeping/migrating. So, the check is inverted there - fix it. Signed-off-by:
Song Muchun <smuchun@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: b60205c7 ("sched/fair: Fix min_vruntime tracking") Link: http://lkml.kernel.org/r/20181014112612.2614-1-smuchun@gmail.comSigned-off-by:
-
David S. Miller authored
[ Upstream commit b3e1eb8e ] So that when it is unset, ie. '-1', userspace can see it properly. Signed-off-by:
-
David S. Miller authored
[ Upstream commit 455adb31 ] Like x86 and arm, call perf_sample_event_took() in perf event NMI interrupt handler. Signed-off-by:
-
David S. Miller authored
[ Upstream commit cfdc3170 ] It is important to clear the hw->state value for non-stopped events when they are added into the PMU. Otherwise when the event is scheduled out, we won't read the counter because HES_UPTODATE is still set. This breaks 'perf stat' and similar use cases, causing all the events to show zero. This worked for multi-pcr because we make explicit sparc_pmu_start() calls in calculate_multiple_pcrs(). calculate_single_pcr() doesn't do this because the idea there is to accumulate all of the counter settings into the single pcr value. So we have to add explicit hw->state handling there. Like x86, we use the PERF_HES_ARCH bit to track truly stopped events so that we don't accidently start them on a reload. Related to all of this, sparc_pmu_start() is missing a userpage update so add it. Signed-off-by:
-
Jiri Olsa authored
[ Upstream commit 94aafb74 ] Michael reported that he could not stat following event: $ perf stat -e unc_p_freq_ge_1200mhz_cycles -a -- ls event syntax error: '..e_1200mhz_cycles' \___ value too big for format, maximum is 255 Run 'perf list' for a list of valid events The event is unwrapped into: uncore_pcu/event=0xb,filter_band0=1200/ where filter_band0 format says it's one byte only: # cat uncore_pcu/format/filter_band0 config1:0-7 while JSON files specifies bigger number: "Filter": "filter_band0=1200", all the filter_band* formats show 1 byte width: # cat uncore_pcu/format/filter_band1 config1:8-15 # cat uncore_pcu/format/filter_band2 config1:16-23 # cat uncore_pcu/format/filter_band3 config1:24-31 The reason of the issue is that filter_band* values are supposed to be in 100Mhz units.. it's stated in the JSON help for the events, like: filter_band3=XXX, with XXX in 100Mhz units This patch divides the filter_band* values by 100, plus there's couple of changes that actually change the number completely, like: - "Filter": "edge=1,filter_band2=4000", + "Filter": "edge=1,filter_band2=30", Reported-by:
Michael Petlan <mpetlan@redhat.com> Signed-off-by:
Andi Kleen <ak@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20181010080339.GB15790@kravaSigned-off-by:
-
Florian Westphal authored
[ Upstream commit 9dffff20 ] bydst table/list lookups use rcu, so insertions must use rcu versions. Fixes: a7c44247 ("xfrm: policy: make xfrm_policy_lookup_bytype lockless") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Jiri Olsa authored
[ Upstream commit 1b9caa10 ] This reverts commit ac0e2cd5. Michael reported an issue with oversized terms values assignment and I noticed there was actually a misunderstanding of the max value check in the past. The above commit's changelog says: If bit 21 is set, there is parsing issues as below. $ perf stat -a -e uncore_qpi_0/event=0x200002,umask=0x8/ event syntax error: '..pi_0/event=0x200002,umask=0x8/' \___ value too big for format, maximum is 511 But there's no issue there, because the event value is distributed along the value defined by the format. Even if the format defines separated bit, the value is treated as a continual number, which should follow the format definition. In above case it's 9-bit value with last bit separated: $ cat uncore_qpi_0/format/event config:0-7,21 Hence the value 0x200002 is correctly reported as format violation, because it exceeds 9 bits. It should have been 0x102 instead, which sets the 9th bit - the bit 21 of the format. $ perf stat -vv -a -e uncore_qpi_0/event=0x102,umask=0x8/ Using CPUID GenuineIntel-6-2D ... ------------------------------------------------------------ perf_event_attr: type 10 size 112 config 0x200802 sample_type IDENTIFIER ... Reported-by:
-
Eric Dumazet authored
[ Upstream commit 262f9d81 ] If the current process has unlimited RLIMIT_MEMLOCK, we should should leave it as is. Fixes: 941ff6f1 ("bpf: fix rlimit in reuseport net selftest") Signed-off-by:
John Sperbeck <jsperbeck@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Marek Szyprowski authored
commit f5e758b8 upstream. PMIC_IRQB and PMIC_KEYINB lines on Exynos4210-based Origen board have external pull-up resistors, so disable any pull control for those lines in respective pin controller node. This fixes support for MAX8997 interrupts and enables operation of wakeup from MAX8997 RTC alarm. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Fixes: 17419726 ("ARM: dts: add max8997 device node for exynos4210-origen board") Cc: <stable@vger.kernel.org> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Sai Praneeth authored
commit 706d5168 upstream. Future Intel processors will support "Enhanced IBRS" which is an "always on" mode i.e. IBRS bit in SPEC_CTRL MSR is enabled once and never disabled. From the specification [1]: "With enhanced IBRS, the predicted targets of indirect branches executed cannot be controlled by software that was executed in a less privileged predictor mode or on another logical processor. As a result, software operating on a processor with enhanced IBRS need not use WRMSR to set IA32_SPEC_CTRL.IBRS after every transition to a more privileged predictor mode. Software can isolate predictor modes effectively simply by setting the bit once. Software need not disable enhanced IBRS prior to entering a sleep state such as MWAIT or HLT." If Enhanced IBRS is supported by the processor then use it as the preferred spectre v2 mitigation mechanism instead of Retpoline. Intel's Retpoline white paper [2] states: "Retpoline is known to be an effective branch target injection (Spectre variant 2) mitigation on Intel processors belonging to family 6 (enumerated by the CPUID instruction) that do not have support for enhanced IBRS. On processors that support enhanced IBRS, it should be used for mitigation instead of retpoline." The reason why Enhanced IBRS is the recommended mitigation on processors which support it is that these processors also support CET which provides a defense against ROP attacks. Retpoline is very similar to ROP techniques and might trigger false positives in the CET defense. If Enhanced IBRS is selected as the mitigation technique for spectre v2, the IBRS bit in SPEC_CTRL MSR is set once at boot time and never cleared. Kernel also has to make sure that IBRS bit remains set after VMEXIT because the guest might have cleared the bit. This is already covered by the existing x86_spec_ctrl_set_guest() and x86_spec_ctrl_restore_host() speculation control functions. Enhanced IBRS still requires IBPB for full mitigation. [1] Speculative-Execution-Side-Channel-Mitigations.pdf [2] Retpoline-A-Branch-Target-Injection-Mitigation.pdf Both documents are available at: https://bugzilla.kernel.org/show_bug.cgi?id=199511Originally-by:
David Woodhouse <dwmw@amazon.co.uk> Signed-off-by:
Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Signed-off-by:
-
Sebastian Andrzej Siewior authored
commit f77084d9 upstream. The WARN_ON_ONCE(__read_cr3() != build_cr3()) in switch_mm_irqs_off() triggers every once in a while during a snapshotted system upgrade. The warning triggers since commit decab088 ("x86/mm: Remove preempt_disable/enable() from __native_flush_tlb()"). The callchain is: get_page_from_freelist() -> post_alloc_hook() -> __kernel_map_pages() with CONFIG_DEBUG_PAGEALLOC enabled. Disable preemption during CR3 reset / __flush_tlb_all() and add a comment why preemption has to be disabled so it won't be removed accidentaly. Add another preemptible() check in __flush_tlb_all() to catch callers with enabled preemption when PGE is enabled, because PGE enabled does not trigger the warning in __native_flush_tlb(). Suggested by Andy Lutomirski. Fixes: decab088 ("x86/mm: Remove preempt_disable/enable() from __native_flush_tlb()") Signed-off-by:
-
He Zhe authored
x86/corruption-check: Fix panic in memory_corruption_check() when boot option without value is provided commit ccde460b upstream. memory_corruption_check[{_period|_size}]()'s handlers do not check input argument before passing it to kstrtoul() or simple_strtoull(). The argument would be a NULL pointer if each of the kernel parameters, without its value, is set in command line and thus cause the following panic. PANIC: early exception 0xe3 IP 10:ffffffff73587c22 error 0 cr2 0x0 [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.18-rc8+ #2 [ 0.000000] RIP: 0010:kstrtoull+0x2/0x10 ... [ 0.000000] Call Trace [ 0.000000] ? set_corruption_check+0x21/0x49 [ 0.000000] ? do_early_param+0x4d/0x82 [ 0.000000] ? parse_args+0x212/0x330 [ 0.000000] ? rdinit_setup+0x26/0x26 [ 0.000000] ? parse_early_options+0x20/0x23 [ 0.000000] ? rdinit_setup+0x26/0x26 [ 0.000000] ? parse_early_param+0x2d/0x39 [ 0.000000] ? setup_arch+0x2f7/0xbf4 [ 0.000000] ? start_kernel+0x5e/0x4c2 [ 0.000000] ? load_ucode_bsp+0x113/0x12f [ 0.000000] ? secondary_startup_64+0xa5/0xb0 This patch adds checks to prevent the panic. Signed-off-by:
He Zhe <zhe.he@windriver.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: gregkh@linuxfoundation.org Cc: kstewart@linuxfoundation.org Cc: pombredanne@nexb.com Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1534260823-87917-1-git-send-email-zhe.he@windriver.comSigned-off-by:
-
Juergen Gross authored
commit 357d291c upstream. The boot loader version reported via sysfs is wrong in case of the kernel being booted via the Xen PVH boot entry. it should be 2.12 (0x020c), but it is reported to be 2.18 (0x0212). As the current way to set the version is error prone use the more readable variant (2 << 8) | 12. Signed-off-by:
Juergen Gross <jgross@suse.com> Cc: <stable@vger.kernel.org> # 4.12 Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: boris.ostrovsky@oracle.com Cc: bp@alien8.de Cc: corbet@lwn.net Cc: linux-doc@vger.kernel.org Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/20181010061456.22238-2-jgross@suse.comSigned-off-by:
-
Jiri Kosina authored
commit 53c613fe upstream. STIBP is a feature provided by certain Intel ucodes / CPUs. This feature (once enabled) prevents cross-hyperthread control of decisions made by indirect branch predictors. Enable this feature if - the CPU is vulnerable to spectre v2 - the CPU supports SMT and has SMT siblings online - spectre_v2 mitigation autoselection is enabled (default) After some previous discussion, this leaves STIBP on all the time, as wrmsr on crossing kernel boundary is a no-no. This could perhaps later be a bit more optimized (like disabling it in NOHZ, experiment with disabling it in idle, etc) if needed. Note that the synchronization of the mask manipulation via newly added spec_ctrl_mutex is currently not strictly needed, as the only updater is already being serialized by cpu_add_remove_lock, but let's make this a little bit more future-proof. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Alex Stanoev authored
commit ac237c28 upstream. The Creative Audigy SE (SB0570) card currently exhibits an audible pop whenever playback is stopped or resumed, or during silent periods of an audio stream. Initialise the IZD bit to the 0 to eliminate these pops. The Infinite Zero Detection (IZD) feature on the DAC causes the output to be shunted to Vcap after 2048 samples of silence. This discharges the AC coupling capacitor through the output and causes the aforementioned pop/click noise. The behaviour of the IZD bit is described on page 15 of the WM8768GEDS datasheet: "With IZD=1, applying MUTE for 1024 consecutive input samples will cause all outputs to be connected directly to VCAP. This also happens if 2048 consecutive zero input samples are applied to all 6 channels, and IZD=0. It will be removed as soon as any channel receives a non-zero input". I believe the second sentence might be referring to IZD=1 instead of IZD=0 given the observed behaviour of the card. This change should make the DAC initialisation consistent with Creative's Windows driver, as this popping persists when initialising the card in Linux and soft rebooting into Windows, but is not present on a cold boot to Windows. Signed-off-by:
Alex Stanoev <alex@astanoev.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
