Skip to content

L
linux
Switch branch/tag
  1. 31 Jan, 2019 21 commits
  3. 26 Jan, 2019 19 commits
    • Greg Kroah-Hartman's avatar
      Linux 4.14.96 · e6608e1f
      Greg Kroah-Hartman authored
      e6608e1f
    • Corey Minyard's avatar
      ipmi:ssif: Fix handling of multi-part return messages · 7c307d32
      Corey Minyard authored 
      commit 7d6380cd upstream.

The block number was not being compared right, it was off by one
when checking the response.

Some statistics wouldn't be incremented properly in some cases.

Check to see if that middle-part messages always have 31 bytes of
data.
Signed-off-by: default avatarCorey Minyard <cminyard@mvista.com>
Cc: stable@vger.kernel.org # 4.4
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      7c307d32
    • Marc Zyngier's avatar
      PCI: dwc: Move interrupt acking into the proper callback · 413cb66b
      Marc Zyngier authored 
      commit 3f7bb2ec upstream.

The write to the status register is really an ACK for the HW,
and should be treated as such by the driver. Let's move it to the
irq_ack() callback, which will prevent people from moving it around
in order to paper over other bugs.

Fixes: 8c934095 ("PCI: dwc: Clear MSI interrupt status after it is handled,
not before")
Fixes: 7c5925af ("PCI: dwc: Move MSI IRQs allocation to IRQ domains
hierarchical API")
Link: https://lore.kernel.org/linux-pci/20181113225734.8026-1-marc.zyngier@arm.com/Reported-by: default avatarTrent Piepho <tpiepho@impinj.com>
Tested-by: default avatarNiklas Cassel <niklas.cassel@linaro.org>
Tested-by: default avatarGustavo Pimentel <gustavo.pimentel@synopsys.com>
Tested-by: default avatarStanimir Varbanov <svarbanov@mm-sol.com>
Signed-off-by: default avatarMarc Zyngier <marc.zyngier@arm.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: default avatarLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      413cb66b
    • Zhenyu Wang's avatar
      drm/i915/gvt: Fix mmap range check · e89ec9b9
      Zhenyu Wang authored 
      commit 51b00d85 upstream.

This is to fix missed mmap range check on vGPU bar2 region
and only allow to map vGPU allocated GMADDR range, which means
user space should support sparse mmap to get proper offset for
mmap vGPU aperture. And this takes care of actual pgoff in mmap
request as original code always does from beginning of vGPU
aperture.

Fixes: 659643f7 ("drm/i915/gvt/kvmgt: add vfio/mdev support to KVMGT")
Cc: "Monroy, Rodrigo Axel" <rodrigo.axel.monroy@intel.com>
Cc: "Orrala Contreras, Alfredo" <alfredo.orrala.contreras@intel.com>
Cc: stable@vger.kernel.org # v4.10+
Reviewed-by: default avatarHang Yuan <hang.yuan@intel.com>
Signed-off-by: default avatarZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      e89ec9b9
    • Steve French's avatar
      cifs: allow disabling insecure dialects in the config · bfbd7e95
      Steve French authored 
      commit 7420451f upstream.

allow disabling cifs (SMB1 ie vers=1.0) and vers=2.0 in the
config for the build of cifs.ko if want to always prevent mounting
with these less secure dialects.
Signed-off-by: default avatarSteve French <stfrench@microsoft.com>
Reviewed-by: default avatarAurelien Aptel <aaptel@suse.com>
Reviewed-by: default avatarJeremy Allison <jra@samba.org>
Cc: Alakesh Haloi <alakeshh@amazon.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      bfbd7e95
    • Corey Minyard's avatar
      ipmi:pci: Blacklist a Realtek "IPMI" device · de616eb2
      Corey Minyard authored 
      commit bc48fa1b upstream.

Realtek has some sort of "Virtual" IPMI device on the PCI bus as a
KCS controller, but whatever it is, it's not one.  Ignore it if seen.

[ Commit 13d0b35c (ipmi_si: Move PCI setup to another file) from Linux
  4.15-rc1 has not been back ported, so the PCI code is still in
  `drivers/char/ipmi/ipmi_si_intf.c`, requiring to apply the commit
  manually.

  This fixes a 100 s boot delay on the HP EliteDesk 705 G4 MT with Linux
  4.14.94. ]
Reported-by: default avatarChris Chiu <chiu@endlessm.com>
Signed-off-by: default avatarCorey Minyard <cminyard@mvista.com>
Tested-by: default avatarDaniel Drake <drake@endlessm.com>
Signed-off-by: default avatarPaul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      de616eb2
    • Scott Mayhew's avatar
      nfs: fix a deadlock in nfs client initialization · 53818c76
      Scott Mayhew authored 
      commit c156618e upstream.

The following deadlock can occur between a process waiting for a client
to initialize in while walking the client list during nfsv4 server trunking
detection and another process waiting for the nfs_clid_init_mutex so it
can initialize that client:

Process 1                               Process 2
---------                               ---------
spin_lock(&nn->nfs_client_lock);
list_add_tail(&CLIENTA->cl_share_link,
        &nn->nfs_client_list);
spin_unlock(&nn->nfs_client_lock);
                                        spin_lock(&nn->nfs_client_lock);
                                        list_add_tail(&CLIENTB->cl_share_link,
                                                &nn->nfs_client_list);
                                        spin_unlock(&nn->nfs_client_lock);
                                        mutex_lock(&nfs_clid_init_mutex);
                                        nfs41_walk_client_list(clp, result, cred);
                                        nfs_wait_client_init_complete(CLIENTA);
(waiting for nfs_clid_init_mutex)

Make sure nfs_match_client() only evaluates clients that have completed
initialization in order to prevent that deadlock.

This patch also fixes v4.0 trunking behavior by not marking the client
NFS_CS_READY until the clientid has been confirmed.
Signed-off-by: default avatarScott Mayhew <smayhew@redhat.com>
Signed-off-by: default avatarAnna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: default avatarQian Lu <luqia@amazon.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      53818c76
    • Michal Hocko's avatar
      mm, proc: be more verbose about unstable VMA flags in /proc/<pid>/smaps · 696ce77b
      Michal Hocko authored 
      [ Upstream commit 7550c607 ]

Patch series "THP eligibility reporting via proc".

This series of three patches aims at making THP eligibility reporting much
more robust and long term sustainable.  The trigger for the change is a
regression report [2] and the long follow up discussion.  In short the
specific application didn't have good API to query whether a particular
mapping can be backed by THP so it has used VMA flags to workaround that.
These flags represent a deep internal state of VMAs and as such they
should be used by userspace with a great deal of caution.

A similar has happened for [3] when users complained that VM_MIXEDMAP is
no longer set on DAX mappings.  Again a lack of a proper API led to an
abuse.

The first patch in the series tries to emphasise that that the semantic of
flags might change and any application consuming those should be really
careful.

The remaining two patches provide a more suitable interface to address [2]
and provide a consistent API to query the THP status both for each VMA and
process wide as well.  [1]

http://lkml.kernel.org/r/20181120103515.25280-1-mhocko@kernel.org [2]
http://lkml.kernel.org/r/http://lkml.kernel.org/r/alpine.DEB.2.21.1809241054050.224429@chino.kir.corp.google.com
[3] http://lkml.kernel.org/r/20181002100531.GC4135@quack2.suse.cz

This patch (of 3):

Even though vma flags exported via /proc/<pid>/smaps are explicitly
documented to be not guaranteed for future compatibility the warning
doesn't go far enough because it doesn't mention semantic changes to those
flags.  And they are important as well because these flags are a deep
implementation internal to the MM code and the semantic might change at
any time.

Let's consider two recent examples:
http://lkml.kernel.org/r/20181002100531.GC4135@quack2.suse.cz
: commit e1fb4a08 "dax: remove VM_MIXEDMAP for fsdax and device dax" has
: removed VM_MIXEDMAP flag from DAX VMAs. Now our testing shows that in the
: mean time certain customer of ours started poking into /proc/<pid>/smaps
: and looks at VMA flags there and if VM_MIXEDMAP is missing among the VMA
: flags, the application just fails to start complaining that DAX support is
: missing in the kernel.

http://lkml.kernel.org/r/alpine.DEB.2.21.1809241054050.224429@chino.kir.corp.google.com
: Commit 18600332 ("mm: make PR_SET_THP_DISABLE immediately active")
: introduced a regression in that userspace cannot always determine the set
: of vmas where thp is ineligible.
: Userspace relies on the "nh" flag being emitted as part of /proc/pid/smaps
: to determine if a vma is eligible to be backed by hugepages.
: Previous to this commit, prctl(PR_SET_THP_DISABLE, 1) would cause thp to
: be disabled and emit "nh" as a flag for the corresponding vmas as part of
: /proc/pid/smaps.  After the commit, thp is disabled by means of an mm
: flag and "nh" is not emitted.
: This causes smaps parsing libraries to assume a vma is eligible for thp
: and ends up puzzling the user on why its memory is not backed by thp.

In both cases userspace was relying on a semantic of a specific VMA flag.
The primary reason why that happened is a lack of a proper interface.
While this has been worked on and it will be fixed properly, it seems that
our wording could see some refinement and be more vocal about semantic
aspect of these flags as well.

Link: http://lkml.kernel.org/r/20181211143641.3503-2-mhocko@kernel.orgSigned-off-by: default avatarMichal Hocko <mhocko@suse.com>
Acked-by: default avatarJan Kara <jack@suse.cz>
Acked-by: default avatarDan Williams <dan.j.williams@intel.com>
Acked-by: default avatarDavid Rientjes <rientjes@google.com>
Acked-by: default avatarMike Rapoport <rppt@linux.ibm.com>
Acked-by: default avatarVlastimil Babka <vbabka@suse.cz>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Paul Oppenheimer <bepvte@gmail.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      696ce77b
    • Aaron Lu's avatar
      mm/swap: use nr_node_ids for avail_lists in swap_info_struct · 4fb12a08
      Aaron Lu authored 
      [ Upstream commit 66f71da9 ]

Since a2468cc9 ("swap: choose swap device according to numa node"),
avail_lists field of swap_info_struct is changed to an array with
MAX_NUMNODES elements.  This made swap_info_struct size increased to 40KiB
and needs an order-4 page to hold it.

This is not optimal in that:
1 Most systems have way less than MAX_NUMNODES(1024) nodes so it
  is a waste of memory;
2 It could cause swapon failure if the swap device is swapped on
  after system has been running for a while, due to no order-4
  page is available as pointed out by Vasily Averin.

Solve the above two issues by using nr_node_ids(which is the actual
possible node number the running system has) for avail_lists instead of
MAX_NUMNODES.

nr_node_ids is unknown at compile time so can't be directly used when
declaring this array.  What I did here is to declare avail_lists as zero
element array and allocate space for it when allocating space for
swap_info_struct.  The reason why keep using array but not pointer is
plist_for_each_entry needs the field to be part of the struct, so pointer
will not work.

This patch is on top of Vasily Averin's fix commit.  I think the use of
kvzalloc for swap_info_struct is still needed in case nr_node_ids is
really big on some systems.

Link: http://lkml.kernel.org/r/20181115083847.GA11129@intel.comSigned-off-by: default avatarAaron Lu <aaron.lu@intel.com>
Reviewed-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Acked-by: default avatarMichal Hocko <mhocko@suse.com>
Cc: Vasily Averin <vvs@virtuozzo.com>
Cc: Huang Ying <ying.huang@intel.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      4fb12a08
    • Brian Foster's avatar
      mm/page-writeback.c: don't break integrity writeback on ->writepage() error · 694c20fe
      Brian Foster authored 
      [ Upstream commit 3fa750dc ]

write_cache_pages() is used in both background and integrity writeback
scenarios by various filesystems.  Background writeback is mostly
concerned with cleaning a certain number of dirty pages based on various
mm heuristics.  It may not write the full set of dirty pages or wait for
I/O to complete.  Integrity writeback is responsible for persisting a set
of dirty pages before the writeback job completes.  For example, an
fsync() call must perform integrity writeback to ensure data is on disk
before the call returns.

write_cache_pages() unconditionally breaks out of its processing loop in
the event of a ->writepage() error.  This is fine for background
writeback, which had no strict requirements and will eventually come
around again.  This can cause problems for integrity writeback on
filesystems that might need to clean up state associated with failed page
writeouts.  For example, XFS performs internal delayed allocation
accounting before returning a ->writepage() error, where applicable.  If
the current writeback happens to be associated with an unmount and
write_cache_pages() completes the writeback prematurely due to error, the
filesystem is unmounted in an inconsistent state if dirty+delalloc pages
still exist.

To handle this problem, update write_cache_pages() to always process the
full set of pages for integrity writeback regardless of ->writepage()
errors.  Save the first encountered error and return it to the caller once
complete.  This facilitates XFS (or any other fs that expects integrity
writeback to process the entire set of dirty pages) to clean up its
internal state completely in the event of persistent mapping errors.
Background writeback continues to exit on the first error encountered.

[akpm@linux-foundation.org: fix typo in comment]
Link: http://lkml.kernel.org/r/20181116134304.32440-1-bfoster@redhat.comSigned-off-by: default avatarBrian Foster <bfoster@redhat.com>
Reviewed-by: default avatarJan Kara <jack@suse.cz>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      694c20fe
    • Junxiao Bi's avatar
      ocfs2: fix panic due to unrecovered local alloc · f976e59e
      Junxiao Bi authored 
      [ Upstream commit 532e1e54 ]

mount.ocfs2 ignore the inconsistent error that journal is clean but
local alloc is unrecovered.  After mount, local alloc not empty, then
reserver cluster didn't alloc a new local alloc window, reserveration
map is empty(ocfs2_reservation_map.m_bitmap_len = 0), that triggered the
following panic.

This issue was reported at

  https://oss.oracle.com/pipermail/ocfs2-devel/2015-May/010854.html

and was advised to fixed during mount.  But this is a very unusual
inconsistent state, usually journal dirty flag should be cleared at the
last stage of umount until every other things go right.  We may need do
further debug to check that.  Any way to avoid possible futher
corruption, mount should be abort and fsck should be run.

  (mount.ocfs2,1765,1):ocfs2_load_local_alloc:353 ERROR: Local alloc hasn't been recovered!
  found = 6518, set = 6518, taken = 8192, off = 15912372
  ocfs2: Mounting device (202,64) on (node 0, slot 3) with ordered data mode.
  o2dlm: Joining domain 89CEAC63CC4F4D03AC185B44E0EE0F3F ( 0 1 2 3 4 5 6 8 ) 8 nodes
  ocfs2: Mounting device (202,80) on (node 0, slot 3) with ordered data mode.
  o2hb: Region 89CEAC63CC4F4D03AC185B44E0EE0F3F (xvdf) is now a quorum device
  o2net: Accepted connection from node yvwsoa17p (num 7) at 172.22.77.88:7777
  o2dlm: Node 7 joins domain 64FE421C8C984E6D96ED12C55FEE2435 ( 0 1 2 3 4 5 6 7 8 ) 9 nodes
  o2dlm: Node 7 joins domain 89CEAC63CC4F4D03AC185B44E0EE0F3F ( 0 1 2 3 4 5 6 7 8 ) 9 nodes
  ------------[ cut here ]------------
  kernel BUG at fs/ocfs2/reservations.c:507!
  invalid opcode: 0000 [#1] SMP
  Modules linked in: ocfs2 rpcsec_gss_krb5 auth_rpcgss nfsv4 nfs fscache lockd grace ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs sunrpc ipt_REJECT nf_reject_ipv4 nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 ovmapi ppdev parport_pc parport xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea acpi_cpufreq pcspkr i2c_piix4 i2c_core sg ext4 jbd2 mbcache2 sr_mod cdrom xen_blkfront pata_acpi ata_generic ata_piix floppy dm_mirror dm_region_hash dm_log dm_mod
  CPU: 0 PID: 4349 Comm: startWebLogic.s Not tainted 4.1.12-124.19.2.el6uek.x86_64 #2
  Hardware name: Xen HVM domU, BIOS 4.4.4OVM 09/06/2018
  task: ffff8803fb04e200 ti: ffff8800ea4d8000 task.ti: ffff8800ea4d8000
  RIP: 0010:[<ffffffffa05e96a8>]  [<ffffffffa05e96a8>] __ocfs2_resv_find_window+0x498/0x760 [ocfs2]
  Call Trace:
    ocfs2_resmap_resv_bits+0x10d/0x400 [ocfs2]
    ocfs2_claim_local_alloc_bits+0xd0/0x640 [ocfs2]
    __ocfs2_claim_clusters+0x178/0x360 [ocfs2]
    ocfs2_claim_clusters+0x1f/0x30 [ocfs2]
    ocfs2_convert_inline_data_to_extents+0x634/0xa60 [ocfs2]
    ocfs2_write_begin_nolock+0x1c6/0x1da0 [ocfs2]
    ocfs2_write_begin+0x13e/0x230 [ocfs2]
    generic_perform_write+0xbf/0x1c0
    __generic_file_write_iter+0x19c/0x1d0
    ocfs2_file_write_iter+0x589/0x1360 [ocfs2]
    __vfs_write+0xb8/0x110
    vfs_write+0xa9/0x1b0
    SyS_write+0x46/0xb0
    system_call_fastpath+0x18/0xd7
  Code: ff ff 8b 75 b8 39 75 b0 8b 45 c8 89 45 98 0f 84 e5 fe ff ff 45 8b 74 24 18 41 8b 54 24 1c e9 56 fc ff ff 85 c0 0f 85 48 ff ff ff <0f> 0b 48 8b 05 cf c3 de ff 48 ba 00 00 00 00 00 00 00 10 48 85
  RIP   __ocfs2_resv_find_window+0x498/0x760 [ocfs2]
   RSP <ffff8800ea4db668>
  ---[ end trace 566f07529f2edf3c ]---
  Kernel panic - not syncing: Fatal exception
  Kernel Offset: disabled

Link: http://lkml.kernel.org/r/20181121020023.3034-2-junxiao.bi@oracle.comSigned-off-by: default avatarJunxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: default avatarYiwen Jiang <jiangyiwen@huawei.com>
Acked-by: default avatarJoseph Qi <jiangqi903@gmail.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      f976e59e
    • Qian Cai's avatar
      scsi: megaraid: fix out-of-bound array accesses · c010d494
      Qian Cai authored 
      [ Upstream commit c7a082e4 ]

UBSAN reported those with MegaRAID SAS-3 3108,

[   77.467308] UBSAN: Undefined behaviour in drivers/scsi/megaraid/megaraid_sas_fp.c:117:32
[   77.475402] index 255 is out of range for type 'MR_LD_SPAN_MAP [1]'
[   77.481677] CPU: 16 PID: 333 Comm: kworker/16:1 Not tainted 4.20.0-rc5+ #1
[   77.488556] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.50 06/01/2018
[   77.495791] Workqueue: events work_for_cpu_fn
[   77.500154] Call trace:
[   77.502610]  dump_backtrace+0x0/0x2c8
[   77.506279]  show_stack+0x24/0x30
[   77.509604]  dump_stack+0x118/0x19c
[   77.513098]  ubsan_epilogue+0x14/0x60
[   77.516765]  __ubsan_handle_out_of_bounds+0xfc/0x13c
[   77.521767]  mr_update_load_balance_params+0x150/0x158 [megaraid_sas]
[   77.528230]  MR_ValidateMapInfo+0x2cc/0x10d0 [megaraid_sas]
[   77.533825]  megasas_get_map_info+0x244/0x2f0 [megaraid_sas]
[   77.539505]  megasas_init_adapter_fusion+0x9b0/0xf48 [megaraid_sas]
[   77.545794]  megasas_init_fw+0x1ab4/0x3518 [megaraid_sas]
[   77.551212]  megasas_probe_one+0x2c4/0xbe0 [megaraid_sas]
[   77.556614]  local_pci_probe+0x7c/0xf0
[   77.560365]  work_for_cpu_fn+0x34/0x50
[   77.564118]  process_one_work+0x61c/0xf08
[   77.568129]  worker_thread+0x534/0xa70
[   77.571882]  kthread+0x1c8/0x1d0
[   77.575114]  ret_from_fork+0x10/0x1c

[   89.240332] UBSAN: Undefined behaviour in drivers/scsi/megaraid/megaraid_sas_fp.c:117:32
[   89.248426] index 255 is out of range for type 'MR_LD_SPAN_MAP [1]'
[   89.254700] CPU: 16 PID: 95 Comm: kworker/u130:0 Not tainted 4.20.0-rc5+ #1
[   89.261665] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.50 06/01/2018
[   89.268903] Workqueue: events_unbound async_run_entry_fn
[   89.274222] Call trace:
[   89.276680]  dump_backtrace+0x0/0x2c8
[   89.280348]  show_stack+0x24/0x30
[   89.283671]  dump_stack+0x118/0x19c
[   89.287167]  ubsan_epilogue+0x14/0x60
[   89.290835]  __ubsan_handle_out_of_bounds+0xfc/0x13c
[   89.295828]  MR_LdRaidGet+0x50/0x58 [megaraid_sas]
[   89.300638]  megasas_build_io_fusion+0xbb8/0xd90 [megaraid_sas]
[   89.306576]  megasas_build_and_issue_cmd_fusion+0x138/0x460 [megaraid_sas]
[   89.313468]  megasas_queue_command+0x398/0x3d0 [megaraid_sas]
[   89.319222]  scsi_dispatch_cmd+0x1dc/0x8a8
[   89.323321]  scsi_request_fn+0x8e8/0xdd0
[   89.327249]  __blk_run_queue+0xc4/0x158
[   89.331090]  blk_execute_rq_nowait+0xf4/0x158
[   89.335449]  blk_execute_rq+0xdc/0x158
[   89.339202]  __scsi_execute+0x130/0x258
[   89.343041]  scsi_probe_and_add_lun+0x2fc/0x1488
[   89.347661]  __scsi_scan_target+0x1cc/0x8c8
[   89.351848]  scsi_scan_channel.part.3+0x8c/0xc0
[   89.356382]  scsi_scan_host_selected+0x130/0x1f0
[   89.361002]  do_scsi_scan_host+0xd8/0xf0
[   89.364927]  do_scan_async+0x9c/0x320
[   89.368594]  async_run_entry_fn+0x138/0x420
[   89.372780]  process_one_work+0x61c/0xf08
[   89.376793]  worker_thread+0x13c/0xa70
[   89.380546]  kthread+0x1c8/0x1d0
[   89.383778]  ret_from_fork+0x10/0x1c

This is because when populating Driver Map using firmware raid map, all
non-existing VDs set their ldTgtIdToLd to 0xff, so it can be skipped later.

From drivers/scsi/megaraid/megaraid_sas_base.c ,
memset(instance->ld_ids, 0xff, MEGASAS_MAX_LD_IDS);

From drivers/scsi/megaraid/megaraid_sas_fp.c ,
/* For non existing VDs, iterate to next VD*/
if (ld >= (MAX_LOGICAL_DRIVES_EXT - 1))
	continue;

However, there are a few places that failed to skip those non-existing VDs
due to off-by-one errors. Then, those 0xff leaked into MR_LdRaidGet(0xff,
map) and triggered the out-of-bound accesses.

Fixes: 51087a86 ("megaraid_sas : Extended VD support")
Signed-off-by: default avatarQian Cai <cai@lca.pw>
Acked-by: default avatarSumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      c010d494
    • Yanjiang Jin's avatar
      scsi: smartpqi: call pqi_free_interrupts() in pqi_shutdown() · 008b4a70
      Yanjiang Jin authored 
      [ Upstream commit e57b2945 ]

We must free all irqs during shutdown, else kexec's 2nd kernel would hang
in pqi_wait_for_completion_io() as below:

Call trace:

 pqi_wait_for_completion_io
 pqi_submit_raid_request_synchronous.constprop.78+0x23c/0x310 [smartpqi]
 pqi_configure_events+0xec/0x1f8 [smartpqi]
 pqi_ctrl_init+0x814/0xca0 [smartpqi]
 pqi_pci_probe+0x400/0x46c [smartpqi]
 local_pci_probe+0x48/0xb0
 pci_device_probe+0x14c/0x1b0
 really_probe+0x218/0x3fc
 driver_probe_device+0x70/0x140
 __driver_attach+0x11c/0x134
 bus_for_each_dev+0x70/0xc8
 driver_attach+0x30/0x38
 bus_add_driver+0x1f0/0x294
 driver_register+0x74/0x12c
 __pci_register_driver+0x64/0x70
 pqi_init+0xd0/0x10000 [smartpqi]
 do_one_initcall+0x60/0x1d8
 do_init_module+0x64/0x1f8
 load_module+0x10ec/0x1350
 __se_sys_finit_module+0xd4/0x100
 __arm64_sys_finit_module+0x28/0x34
 el0_svc_handler+0x104/0x160
 el0_svc+0x8/0xc

This happens only in the following combinations:

1. smartpqi is built as module, not built-in;
2. We have a disk connected to smartpqi card;
3. Both kexec's 1st and 2nd kernels use this disk as Rootfs' mount point.
Signed-off-by: default avatarYanjiang Jin <yanjiang.jin@hxt-semitech.com>
Acked-by: default avatarDon Brace <don.brace@microsemi.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      008b4a70
    • Kevin Barnett's avatar
      scsi: smartpqi: correct lun reset issues · ceecd0c6
      Kevin Barnett authored 
      [ Upstream commit 2ba55c98 ]

Problem:
The Linux kernel takes a logical volume offline after a LUN reset.  This is
generally accompanied by this message in the dmesg output:

Device offlined - not ready after error recovery

Root Cause:
The root cause is a "quirk" in the timeout handling in the Linux SCSI
layer. The Linux kernel places a 30-second timeout on most media access
commands (reads and writes) that it send to device drivers.  When a media
access command times out, the Linux kernel goes into error recovery mode
for the LUN that was the target of the command that timed out. Every
command that timed out is kept on a list inside of the Linux kernel to be
retried later. The kernel attempts to recover the command(s) that timed out
by issuing a LUN reset followed by a TEST UNIT READY. If the LUN reset and
TEST UNIT READY commands are successful, the kernel retries the command(s)
that timed out.

Each SCSI command issued by the kernel has a result field associated with
it. This field indicates the final result of the command (success or
error). When a command times out, the kernel places a value in this result
field indicating that the command timed out.

The "quirk" is that after the LUN reset and TEST UNIT READY commands are
completed, the kernel checks each command on the timed-out command list
before retrying it. If the result field is still "timed out", the kernel
treats that command as not having been successfully recovered for a
retry. If the number of commands that are in this state are greater than
two, the kernel takes the LUN offline.

Fix:
When our RAIDStack receives a LUN reset, it simply waits until all
outstanding commands complete. Generally, all of these outstanding commands
complete successfully. Therefore, the fix in the smartpqi driver is to
always set the command result field to indicate success when a request
completes successfully. This normally isn’t necessary because the result
field is always initialized to success when the command is submitted to the
driver. So when the command completes successfully, the result field is
left untouched. But in this case, the kernel changes the result field
behind the driver’s back and then expects the field to be changed by the
driver as the commands that timed-out complete.
Reviewed-by: default avatarDave Carroll <david.carroll@microsemi.com>
Reviewed-by: default avatarScott Teel <scott.teel@microsemi.com>
Signed-off-by: default avatarKevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: default avatarDon Brace <don.brace@microsemi.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      ceecd0c6
    • Parvi Kaustubhi's avatar
      IB/usnic: Fix potential deadlock · 9d3e1c09
      Parvi Kaustubhi authored 
      [ Upstream commit 8036e90f ]

Acquiring the rtnl lock while holding usdev_lock could result in a
deadlock.

For example:

usnic_ib_query_port()
| mutex_lock(&us_ibdev->usdev_lock)
 | ib_get_eth_speed()
  | rtnl_lock()

rtnl_lock()
| usnic_ib_netdevice_event()
 | mutex_lock(&us_ibdev->usdev_lock)

This commit moves the usdev_lock acquisition after the rtnl lock has been
released.

This is safe to do because usdev_lock is not protecting anything being
accessed in ib_get_eth_speed(). Hence, the correct order of holding locks
(rtnl -> usdev_lock) is not violated.
Signed-off-by: default avatarParvi Kaustubhi <pkaustub@cisco.com>
Signed-off-by: default avatarJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      9d3e1c09
    • Daniel Vetter's avatar
      sysfs: Disable lockdep for driver bind/unbind files · d9c25a6f
      Daniel Vetter authored 
      [ Upstream commit 4f4b3743 ]

This is the much more correct fix for my earlier attempt at:

https://lkml.org/lkml/2018/12/10/118

Short recap:

- There's not actually a locking issue, it's just lockdep being a bit
  too eager to complain about a possible deadlock.

- Contrary to what I claimed the real problem is recursion on
  kn->count. Greg pointed me at sysfs_break_active_protection(), used
  by the scsi subsystem to allow a sysfs file to unbind itself. That
  would be a real deadlock, which isn't what's happening here. Also,
  breaking the active protection means we'd need to manually handle
  all the lifetime fun.

- With Rafael we discussed the task_work approach, which kinda works,
  but has two downsides: It's a functional change for a lockdep
  annotation issue, and it won't work for the bind file (which needs
  to get the errno from the driver load function back to userspace).

- Greg also asked why this never showed up: To hit this you need to
  unregister a 2nd driver from the unload code of your first driver. I
  guess only gpus do that. The bug has always been there, but only
  with a recent patch series did we add more locks so that lockdep
  built a chain from unbinding the snd-hda driver to the
  acpi_video_unregister call.

Full lockdep splat:

[12301.898799] ============================================
[12301.898805] WARNING: possible recursive locking detected
[12301.898811] 4.20.0-rc7+ #84 Not tainted
[12301.898815] --------------------------------------------
[12301.898821] bash/5297 is trying to acquire lock:
[12301.898826] 00000000f61c6093 (kn->count#39){++++}, at: kernfs_remove_by_name_ns+0x3b/0x80
[12301.898841] but task is already holding lock:
[12301.898847] 000000005f634021 (kn->count#39){++++}, at: kernfs_fop_write+0xdc/0x190
[12301.898856] other info that might help us debug this:
[12301.898862]  Possible unsafe locking scenario:
[12301.898867]        CPU0
[12301.898870]        ----
[12301.898874]   lock(kn->count#39);
[12301.898879]   lock(kn->count#39);
[12301.898883] *** DEADLOCK ***
[12301.898891]  May be due to missing lock nesting notation
[12301.898899] 5 locks held by bash/5297:
[12301.898903]  #0: 00000000cd800e54 (sb_writers#4){.+.+}, at: vfs_write+0x17f/0x1b0
[12301.898915]  #1: 000000000465e7c2 (&of->mutex){+.+.}, at: kernfs_fop_write+0xd3/0x190
[12301.898925]  #2: 000000005f634021 (kn->count#39){++++}, at: kernfs_fop_write+0xdc/0x190
[12301.898936]  #3: 00000000414ef7ac (&dev->mutex){....}, at: device_release_driver_internal+0x34/0x240
[12301.898950]  #4: 000000003218fbdf (register_count_mutex){+.+.}, at: acpi_video_unregister+0xe/0x40
[12301.898960] stack backtrace:
[12301.898968] CPU: 1 PID: 5297 Comm: bash Not tainted 4.20.0-rc7+ #84
[12301.898974] Hardware name: Hewlett-Packard HP EliteBook 8460p/161C, BIOS 68SCF Ver. F.01 03/11/2011
[12301.898982] Call Trace:
[12301.898989]  dump_stack+0x67/0x9b
[12301.898997]  __lock_acquire+0x6ad/0x1410
[12301.899003]  ? kernfs_remove_by_name_ns+0x3b/0x80
[12301.899010]  ? find_held_lock+0x2d/0x90
[12301.899017]  ? mutex_spin_on_owner+0xe4/0x150
[12301.899023]  ? find_held_lock+0x2d/0x90
[12301.899030]  ? lock_acquire+0x90/0x180
[12301.899036]  lock_acquire+0x90/0x180
[12301.899042]  ? kernfs_remove_by_name_ns+0x3b/0x80
[12301.899049]  __kernfs_remove+0x296/0x310
[12301.899055]  ? kernfs_remove_by_name_ns+0x3b/0x80
[12301.899060]  ? kernfs_name_hash+0xd/0x80
[12301.899066]  ? kernfs_find_ns+0x6c/0x100
[12301.899073]  kernfs_remove_by_name_ns+0x3b/0x80
[12301.899080]  bus_remove_driver+0x92/0xa0
[12301.899085]  acpi_video_unregister+0x24/0x40
[12301.899127]  i915_driver_unload+0x42/0x130 [i915]
[12301.899160]  i915_pci_remove+0x19/0x30 [i915]
[12301.899169]  pci_device_remove+0x36/0xb0
[12301.899176]  device_release_driver_internal+0x185/0x240
[12301.899183]  unbind_store+0xaf/0x180
[12301.899189]  kernfs_fop_write+0x104/0x190
[12301.899195]  __vfs_write+0x31/0x180
[12301.899203]  ? rcu_read_lock_sched_held+0x6f/0x80
[12301.899209]  ? rcu_sync_lockdep_assert+0x29/0x50
[12301.899216]  ? __sb_start_write+0x13c/0x1a0
[12301.899221]  ? vfs_write+0x17f/0x1b0
[12301.899227]  vfs_write+0xb9/0x1b0
[12301.899233]  ksys_write+0x50/0xc0
[12301.899239]  do_syscall_64+0x4b/0x180
[12301.899247]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[12301.899253] RIP: 0033:0x7f452ac7f7a4
[12301.899259] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 80 00 00 00 00 8b 05 aa f0 2c 00 48 63 ff 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 f3 c3 66 90 55 53 48 89 d5 48 89 f3 48 83
[12301.899273] RSP: 002b:00007ffceafa6918 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[12301.899282] RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007f452ac7f7a4
[12301.899288] RDX: 000000000000000d RSI: 00005612a1abf7c0 RDI: 0000000000000001
[12301.899295] RBP: 00005612a1abf7c0 R08: 000000000000000a R09: 00005612a1c46730
[12301.899301] R10: 000000000000000a R11: 0000000000000246 R12: 000000000000000d
[12301.899308] R13: 0000000000000001 R14: 00007f452af4a740 R15: 000000000000000d

Looking around I've noticed that usb and i2c already handle similar
recursion problems, where a sysfs file can unbind the same type of
sysfs somewhere else in the hierarchy. Relevant commits are:

commit 356c05d5
Author: Alan Stern <stern@rowland.harvard.edu>
Date:   Mon May 14 13:30:03 2012 -0400

    sysfs: get rid of some lockdep false positives

commit e9b526fe
Author: Alexander Sverdlin <alexander.sverdlin@nsn.com>
Date:   Fri May 17 14:56:35 2013 +0200

    i2c: suppress lockdep warning on delete_device

Implement the same trick for driver bind/unbind.

v2: Put the macro into bus.c (Greg).
Reviewed-by: default avatarRafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Arend van Spriel <aspriel@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Vivek Gautam <vivek.gautam@codeaurora.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@intel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      d9c25a6f
    • Takashi Sakamoto's avatar
      ALSA: bebob: fix model-id of unit for Apogee Ensemble · 7afd8e3b
      Takashi Sakamoto authored 
      [ Upstream commit 644b2e97 ]

This commit fixes hard-coded model-id for an unit of Apogee Ensemble with
a correct value. This unit uses DM1500 ASIC produced ArchWave AG (formerly
known as BridgeCo AG).

I note that this model supports three modes in the number of data channels
in tx/rx streams; 8 ch pairs, 10 ch pairs, 18 ch pairs. The mode is
switched by Vendor-dependent AV/C command, like:

$ cd linux-firewire-utils
$ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0600000000 (8ch pairs)
$ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0601000000 (10ch pairs)
$ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0602000000 (18ch pairs)

When switching between different mode, the unit disappears from IEEE 1394
bus, then appears on the bus with different combination of stream formats.
In a mode of 18 ch pairs, available sampling rate is up to 96.0 kHz, else
up to 192.0 kHz.

$ ./hinawa-config-rom-printer /dev/fw1
{ 'bus-info': { 'adj': False,
                'bmc': True,
                'chip_ID': 21474898341,
                'cmc': True,
                'cyc_clk_acc': 100,
                'generation': 2,
                'imc': True,
                'isc': True,
                'link_spd': 2,
                'max_ROM': 1,
                'max_rec': 512,
                'name': '1394',
                'node_vendor_ID': 987,
                'pmc': False},
  'root-directory': [ ['HARDWARE_VERSION', 19],
                      [ 'NODE_CAPABILITIES',
                        { 'addressing': {'64': True, 'fix': True, 'prv': False},
                          'misc': {'int': False, 'ms': False, 'spt': True},
                          'state': { 'atn': False,
                                     'ded': False,
                                     'drq': True,
                                     'elo': False,
                                     'init': False,
                                     'lst': True,
                                     'off': False},
                          'testing': {'bas': False, 'ext': False}}],
                      ['VENDOR', 987],
                      ['DESCRIPTOR', 'Apogee Electronics'],
                      ['MODEL', 126702],
                      ['DESCRIPTOR', 'Ensemble'],
                      ['VERSION', 5297],
                      [ 'UNIT',
                        [ ['SPECIFIER_ID', 41005],
                          ['VERSION', 65537],
                          ['MODEL', 126702],
                          ['DESCRIPTOR', 'Ensemble']]],
                      [ 'DEPENDENT_INFO',
                        [ ['SPECIFIER_ID', 2037],
                          ['VERSION', 1],
                          [(58, 'IMMEDIATE'), 16777159],
                          [(59, 'IMMEDIATE'), 1048576],
                          [(60, 'IMMEDIATE'), 16777159],
                          [(61, 'IMMEDIATE'), 6291456]]]]}
Signed-off-by: default avatarTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      7afd8e3b
    • Yangtao Li's avatar
      clocksource/drivers/integrator-ap: Add missing of_node_put() · 16df3ffc
      Yangtao Li authored 
      [ Upstream commit 5eb73c83 ]

The function of_find_node_by_path() acquires a reference to the node
returned by it and that reference needs to be dropped by its caller.

integrator_ap_timer_init_of() doesn't do that.  The pri_node and the
sec_node are used as an identifier to compare against the current
node, so we can directly drop the refcount after getting the node from
the path as it is not used as pointer.

By dropping the refcount right after getting it, a single variable is
needed instead of two.

Fix this by use a single variable and drop the refcount right after
of_find_node_by_path().
Signed-off-by: default avatarYangtao Li <tiny.windzz@gmail.com>
Signed-off-by: default avatarDaniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      16df3ffc
    • Javier Barrio's avatar
      quota: Lock s_umount in exclusive mode for Q_XQUOTA{ON,OFF} quotactls. · 8c3e1bcc
      Javier Barrio authored 
      [ Upstream commit 41c4f85c ]

Commit 1fa5efe3 (ext4: Use generic helpers for quotaon
and quotaoff) made possible to call quotactl(Q_XQUOTAON/OFF) on ext4 filesystems
with sysfile quota support. This leads to calling dquot_enable/disable without s_umount
held in excl. mode, because quotactl_cmd_onoff checks only for Q_QUOTAON/OFF.

The following WARN_ON_ONCE triggers (in this case for dquot_enable, ext4, latest Linus' tree):

[  117.807056] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: quota,prjquota

[...]

[  155.036847] WARNING: CPU: 0 PID: 2343 at fs/quota/dquot.c:2469 dquot_enable+0x34/0xb9
[  155.036851] Modules linked in: quota_v2 quota_tree ipv6 af_packet joydev mousedev psmouse serio_raw pcspkr i2c_piix4 intel_agp intel_gtt e1000 ttm drm_kms_helper drm agpgart fb_sys_fops syscopyarea sysfillrect sysimgblt i2c_core input_leds kvm_intel kvm irqbypass qemu_fw_cfg floppy evdev parport_pc parport button crc32c_generic dm_mod ata_generic pata_acpi ata_piix libata loop ext4 crc16 mbcache jbd2 usb_storage usbcore sd_mod scsi_mod
[  155.036901] CPU: 0 PID: 2343 Comm: qctl Not tainted 4.20.0-rc6-00025-gf5d58277 #9
[  155.036903] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[  155.036911] RIP: 0010:dquot_enable+0x34/0xb9
[  155.036915] Code: 41 56 41 55 41 54 55 53 4c 8b 6f 28 74 02 0f 0b 4d 8d 7d 70 49 89 fc 89 cb 41 89 d6 89 f5 4c 89 ff e8 23 09 ea ff 85 c0 74 0a <0f> 0b 4c 89 ff e8 8b 09 ea ff 85 db 74 6a 41 8b b5 f8 00 00 00 0f
[  155.036918] RSP: 0018:ffffb09b00493e08 EFLAGS: 00010202
[  155.036922] RAX: 0000000000000001 RBX: 0000000000000008 RCX: 0000000000000008
[  155.036924] RDX: 0000000000000001 RSI: 0000000000000002 RDI: ffff9781b67cd870
[  155.036926] RBP: 0000000000000002 R08: 0000000000000000 R09: 61c8864680b583eb
[  155.036929] R10: ffffb09b00493e48 R11: ffffffffff7ce7d4 R12: ffff9781b7ee8d78
[  155.036932] R13: ffff9781b67cd800 R14: 0000000000000004 R15: ffff9781b67cd870
[  155.036936] FS:  00007fd813250b88(0000) GS:ffff9781ba000000(0000) knlGS:0000000000000000
[  155.036939] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  155.036942] CR2: 00007fd812ff61d6 CR3: 000000007c882000 CR4: 00000000000006b0
[  155.036951] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  155.036953] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  155.036955] Call Trace:
[  155.037004]  dquot_quota_enable+0x8b/0xd0
[  155.037011]  kernel_quotactl+0x628/0x74e
[  155.037027]  ? do_mprotect_pkey+0x2a6/0x2cd
[  155.037034]  __x64_sys_quotactl+0x1a/0x1d
[  155.037041]  do_syscall_64+0x55/0xe4
[  155.037078]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  155.037105] RIP: 0033:0x7fd812fe1198
[  155.037109] Code: 02 77 0d 48 89 c1 48 c1 e9 3f 75 04 48 8b 04 24 48 83 c4 50 5b c3 48 83 ec 08 49 89 ca 48 63 d2 48 63 ff b8 b3 00 00 00 0f 05 <48> 89 c7 e8 c1 eb ff ff 5a c3 48 63 ff b8 bb 00 00 00 0f 05 48 89
[  155.037112] RSP: 002b:00007ffe8cd7b050 EFLAGS: 00000206 ORIG_RAX: 00000000000000b3
[  155.037116] RAX: ffffffffffffffda RBX: 00007ffe8cd7b148 RCX: 00007fd812fe1198
[  155.037119] RDX: 0000000000000000 RSI: 00007ffe8cd7cea9 RDI: 0000000000580102
[  155.037121] RBP: 00007ffe8cd7b0f0 R08: 000055fc8eba8a9d R09: 0000000000000000
[  155.037124] R10: 00007ffe8cd7b074 R11: 0000000000000206 R12: 00007ffe8cd7b168
[  155.037126] R13: 000055fc8eba8897 R14: 0000000000000000 R15: 0000000000000000
[  155.037131] ---[ end trace 210f864257175c51 ]---

and then the syscall proceeds without s_umount locking.

This patch locks the superblock ->s_umount sem. in exclusive mode for all Q_XQUOTAON/OFF
quotactls too in addition to Q_QUOTAON/OFF.

AFAICT, other than ext4, only xfs and ocfs2 are affected by this change.
The VFS will now call in xfs_quota_* functions with s_umount held, which wasn't the case
before. This looks good to me but I can not say for sure. Ext4 and ocfs2 where already
beeing called with s_umount exclusive via quota_quotaon/off which is basically the same.
Signed-off-by: default avatarJavier Barrio <javier.barrio.mart@gmail.com>
Signed-off-by: default avatarJan Kara <jack@suse.cz>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
      8c3e1bcc
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7