- 26 Aug, 2017 39 commits
-
-
Arvind Yadav authored
videobuf_queue_ops are not supposed to change at runtime. All functions working with videobuf_queue_ops provided by <media/videobuf-core.h> work with const videobuf_queue_ops. So mark the non-const structs as const. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
Hans Verkuil <hansverk@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Arvind Yadav authored
videobuf_queue_ops are not supposed to change at runtime. All functions working with videobuf_queue_ops provided by <media/videobuf-core.h> work with const videobuf_queue_ops. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
videobuf_queue_ops are not supposed to change at runtime. All functions working with videobuf_queue_ops provided by <media/videobuf-core.h> work with const videobuf_queue_ops. So mark the non-const structs as const. Signed-off-by:
-
Bhumika Goyal authored
Make this const as it is only used in a copy operation. Signed-off-by:
Bhumika Goyal <bhumirks@gmail.com> Signed-off-by:
-
Bhumika Goyal authored
Make this const as it is only used in a copy operation. Signed-off-by:
-
Stanimir Varbanov authored
This change the alignment restriction for output type of buffers only, also set corect input resolution and fill bidirectional vb2 queue flag in order to map output type buffers read/write. The last is needed by encoder firmware to add padding at the bottom of output (input buffers). Signed-off-by:
Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by:
-
Stanimir Varbanov authored
This change is intended to give to the v4l2 drivers a choice to change the default behavior of the v4l2-core DMA mapping direction from DMA_TO/FROM_DEVICE (depending on the buffer type CAPTURE or OUTPUT) to DMA_BIDIRECTIONAL during queue_init time. Initially the issue with DMA mapping direction has been found in Venus encoder driver where the hardware (firmware side) adds few lines padding on bottom of the image buffer, and the consequence is triggering of IOMMU protection faults. This will help supporting venus encoder (and probably other drivers in the future) which wants to map output type of buffers as read/write. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Hugues Fruchet authored
Implements g_/s_selection crop support by using DCMI crop hardware feature. User can first get the maximum supported resolution of the sensor by calling g_selection(V4L2_SEL_TGT_CROP_BOUNDS). Then user call to s_selection(V4L2_SEL_TGT_CROP) will reset sensor to its maximum resolution and crop request is saved for later usage in s_fmt(). Next call to s_fmt() will check if sensor can do frame size request with crop request. If sensor supports only discrete frame sizes, the frame size which is larger than user request is selected in order to be able to match the crop request. Then s_fmt() resolution user request is adjusted to match crop request resolution. Signed-off-by:
Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by:
-
Hugues Fruchet authored
Uniformize "pixfmt" variables to "pix". Change "current_fmt" & "dcmi_fmt" variables to variables with "sd_" prefix to explicitly refer to subdev format. Signed-off-by:
-
Hugues Fruchet authored
Simplify bits handling of DCMI_CR register. Signed-off-by:
-
Hugues Fruchet authored
Test cookie return by dmaengine_submit() and return error if any. Signed-off-by:
-
Sakari Ailus authored
Avoid using a generic name such as MAX_DATA_LANES in a header file widely included in drivers. Instead, call it V4L2_FWNODE_CSI2_MAX_DATA_LANES. Fixes: 4ee23621 ("media: v4l2-fwnode: suppress a warning at OF parsing logic") Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Sakari Ailus authored
The clock lane is the first lane in the lane_polarities array. Reflect this consistently by putting the number of data lanes after the number of clock lanes. Fixes: 4ee23621 ("media: v4l2-fwnode: suppress a warning at OF parsing logic") Signed-off-by:
-
Sakari Ailus authored
fwnode_property_read_u32_array() only returns the number of array elements if the array argument is NULL. The assumption that it always did so lead to lane-polarities properties never being read. Fixes: 4ee23621 ("media: v4l2-fwnode: suppress a warning at OF parsing logic") Signed-off-by:
-
Sakari Ailus authored
The ACPI match table is empty. Remove it. Also convert the drive to use probe_new callback in struct i2c_driver. Signed-off-by:
-
Sakari Ailus authored
Signed-off-by:
-
Sakari Ailus authored
Dongwoon DW9714 is a voice coil lens driver. Also add a vendor prefix for Dongwoon for one did not exist previously. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Stanimir Varbanov authored
No one of the supported Venus version has implemented VP9 codec for enconding, so drop it from the list of codecs. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Stanimir Varbanov authored
Use the helper function in decoder and encoder find_format to runtime check supported codecs. Signed-off-by:
-
Stanimir Varbanov authored
Adds a helper function to runtime check supported encoder and decoder codecs depending on venus version and platform. Signed-off-by:
-
Stanimir Varbanov authored
This fills missing (forgotten) video device name with appropriate string so that udev can distinguishes between decoder and encoder devices. Signed-off-by:
-
Stanimir Varbanov authored
Without PM support gcc could warns about unused functions, thus mark runtime_suspend/resume as __maybe_unused. Signed-off-by:
-
Arvind Yadav authored
i2c_device_id are not supposed to change at runtime. All functions working with i2c_device_id provided by <linux/i2c.h> work with const i2c_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
i2c_device_id are not supposed to change at runtime. All functions working with i2c_device_id provided by <linux/i2c.h> work with const i2c_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
i2c_device_id are not supposed to change at runtime. All functions working with i2c_device_id provided by <linux/i2c.h> work with const i2c_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
i2c_device_id are not supposed to change at runtime. All functions working with i2c_device_id provided by <linux/i2c.h> work with const i2c_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
i2c_device_id are not supposed to change at runtime. All functions working with i2c_device_id provided by <linux/i2c.h> work with const i2c_device_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
i2c_device_id are not supposed to change at runtime. All functions working with i2c_device_id provided by <linux/i2c.h> work with const i2c_device_id. So mark the non-const structs as const. Signed-off-by:
-
Bhumika Goyal authored
Make these const as they are only used in a copy operation. Done using Coccinelle Signed-off-by:
Mike Isely <isely@pobox.com> Signed-off-by:
-
Bhumika Goyal authored
Make this const as it is only used in a copy operation. Done using Coccinelle Signed-off-by:
-
Bhumika Goyal authored
Make these const as they are only used in a copy operation. Done using Coccinelle Signed-off-by:
-
Bhumika Goyal authored
Make this const as it is only stored in the type field of a device structure, which is const. Done using Coccinelle. Signed-off-by:
-
Bhumika Goyal authored
Make these const as they are only used in a copy operation or are stored in the algo field of i2c_adapter structure, which is const. Signed-off-by:
-
Hans Verkuil authored
Use the new CEC_CAP_DEFAULTS define in this driver. Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by:
-
Hans Verkuil authored
Use the new CEC_CAP_DEFAULTS define in this driver. This also adds the CEC_CAP_RC capability which was missing here (and this is also the reason for this new define, to avoid missing such capabilities). Signed-off-by:
-
Hans Verkuil authored
Only the first HDMI input has a CEC adapter, so just report 'HDMI 0' as the HDMI input name. For the HDMI outputs use bus_cnt instead of i as the output number. The HDMI name now corresponds to what 'v4l2-ctl --list-outputs' reports. Signed-off-by:
-
Hans Verkuil authored
Add support to emulate CEC pin monitoring. There are few hardware devices that support this, so being able to emulate it here helps developing software for this. Signed-off-by:
-
Hans Verkuil authored
The current CEC pin value (0 or 1) was part of the cec_pin struct, but that assumes that CEC pin monitoring can only be used with a driver that uses the low-level CEC pin framework. But hardware that has both a high-level API and can monitor the CEC pin at low-level at the same time does not need to depend on the cec pin framework. To support such devices remove the cur_value field from struct cec_pin and add a cec_pin_is_high field to cec_adapter. This also makes it possible to drop the '#ifdef CONFIG_CEC_PIN' in cec-api.c. Signed-off-by:
-
Hans Verkuil authored
When the adapter is removed the cec_delete_adapter() call attempts to set the physical address to INVALID by calling __cec_s_phys_addr() and so disabling the adapter. However, __cec_s_phys_addr checks if the device node was unregistered and just returns in that case. This means that the adap_enable callback is never called with 'false' to disable the CEC adapter. Most drivers don't care, but some need to do cleanup here. Change the test so the adapter is correctly disabled, even when the device node is unregistered. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
-
- 20 Aug, 2017 1 commit
-
-
Fengguang Wu authored
drivers/media/pci/ddbridge/ddbridge-maxs8.c:145:2-3: Unneeded semicolon drivers/media/pci/ddbridge/ddbridge-maxs8.c:173:2-3: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Fixes: a43dbe430fb4 ("media: ddbridge: support MaxLinear MXL5xx based cards (MaxS4/8)") CC: Daniel Scheller <d.scheller@gmx.net> Signed-off-by:Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
