- 13 Jan, 2019 2 commits
-
-
Mathias Nyman authored
commit 45f750c1 upstream. The code to prevent a bus suspend if a USB3 port was still in link training also reacted to USB2 port polling state. This caused bus suspend to busyloop in some cases. USB2 polling state is different from USB3, and should not prevent bus suspend. Limit the USB3 link training state check to USB3 root hub ports only. The origial commit went to stable so this need to be applied there as well Fixes: 2f31a67f ("usb: xhci: Prevent bus suspend if a port connect change or polling state is detected") Cc: stable@vger.kernel.org Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hui Peng authored
commit 5146f95d upstream. The function hso_probe reads if_num from the USB device (as an u8) and uses it without a length check to index an array, resulting in an OOB memory read in hso_probe or hso_get_config_data. Add a length check for both locations and updated hso_probe to bail on error. This issue has been assigned CVE-2018-19985. Reported-by:
Hui Peng <benquike@gmail.com> Reported-by:
Mathias Payer <mathias.payer@nebelwelt.net> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
- 21 Dec, 2018 38 commits
-
-
Greg Kroah-Hartman authored
-
Dan Carpenter authored
[ Upstream commit 84d7a447 ] "header->number" can be up to USHRT_MAX and it comes from the ioctl so it needs to be capped. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Trent Piepho authored
[ Upstream commit cd7f3a24 ] In order to read correctly from asynchronously updated RTC registers, it's necessary to read repeatedly until their values do not change from read to read. It's also necessary to wait for three RTC clock ticks for certain operations. There are no timeouts in this code and these operations could possibly loop forever. To avoid kernel hangs, put in timeouts. The iMX7d can be configured to stop the SRTC on a tamper event, which will lockup the kernel inside this driver as described above. These hangs can happen when running under qemu, which doesn't emulate the SNVS RTC, though currently the driver will refuse to load on qemu due to a timeout in the driver probe method. It could also happen if the SRTC block where somehow placed into reset or the slow speed clock that drives the SRTC counter (but not the CPU) were to stop. The symptoms on a two core iMX7d are a work queue hang on rtc_timer_do_work(), which eventually blocks a systemd fsnotify operation that triggers a work queue flush, causing systemd to hang and thus causing all services that should be started by systemd, like a console getty, to fail to start or stop. Also optimize the wait code to wait less. It only needs to wait for the clock to advance three ticks, not to see it change three times. Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Bryan O'Donoghue <pure.logic@nexus-software.ie> Signed-off-by:
Trent Piepho <tpiepho@impinj.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Guy Shapiro authored
[ Upstream commit 7bb633b1 ] The clear of the LPTA_EN flag should be synced before writing to the alarm register. Omitting this synchronization creates a race when trying to change existing alarm. Signed-off-by:
Guy Shapiro <guy.shapiro@mobi-wize.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit 0544ee4b ] Some AMD based HP laptops have a SMB0001 ACPI device node which does not define any methods. This leads to the following error in dmesg: [ 5.222731] cmi: probe of SMB0001:00 failed with error -5 This commit makes acpi_smbus_cmi_add() return -ENODEV instead in this case silencing the error. In case of a failure of the i2c_add_adapter() call this commit now propagates the error from that call instead of -EIO. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
[ Upstream commit 6c7f25ca ] According to Intel (R) Axxia TM Lionfish Communication Processor Peripheral Subsystem Hardware Reference Manual, the AXXIA I2C module have a programmable Master Wait Timer, which among others, checks the time between commands send in manual mode. When a timeout (25ms) passes, TSS bit is set in Master Interrupt Status register and a Stop command is issued by the hardware. The axxia_i2c_xfer(), does not properly handle this situation, however. For each message a separate axxia_i2c_xfer_msg() is called and this function incorrectly assumes that any interrupt might happen only when waiting for completion. This is mostly correct but there is one exception - a master timeout can trigger if enough time has passed between individual transfers. It will, by definition, happen between transfers when the interrupts are disabled by the code. If that happens, the hardware issues Stop command. The interrupt indicating timeout will not be triggered as soon as we enable them since the Master Interrupt Status is cleared when master mode is entered again (which happens before enabling irqs) meaning this error is lost and the transfer is continued even though the Stop was issued on the bus. The subsequent operations completes without error but a bogus value (0xFF in case of read) is read as the client device is confused because aborted transfer. No error is returned from master_xfer() making caller believe that a valid value was read. To fix the problem, the TSS bit (indicating timeout) in Master Interrupt Status register is checked before each transfer. If it is set, there was a timeout before this transfer and (as described above) the hardware already issued Stop command so the transaction should be aborted thus -ETIMEOUT is returned from the master_xfer() callback. In order to be sure no timeout was issued we can't just read the status just before starting new transaction as there will always be a small window of time (few CPU cycles at best) where this might still happen. For this reason we have to temporally disable the timer before checking for TSS bit. Disabling it will, however, clear the TSS bit so in order to preserve that information, we have to read it in ISR so we have to ensure that the TSS interrupt is not masked between transfers of one transaction. There is no need to call bus recovery or controller reinitialization if that happens so it's skipped. Signed-off-by:
Krzysztof Adamski <krzysztof.adamski@nokia.com> Reviewed-by:
Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by:
-
Steve French authored
[ Upstream commit 6e785302 ] Missing a dependency. Shouldn't show cifs posix extensions in Kconfig if CONFIG_CIFS_ALLOW_INSECURE_DIALECTS (ie SMB1 protocol) is disabled. Signed-off-by:
Steve French <stfrench@microsoft.com> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
-
Chris Cole authored
[ Upstream commit a1208f6a ] This patch addresses possible memory corruption when v7_dma_inv_range(start_address, end_address) address parameters are not aligned to whole cache lines. This function issues "invalidate" cache management operations to all cache lines from start_address (inclusive) to end_address (exclusive). When start_address and/or end_address are not aligned, the start and/or end cache lines are first issued "clean & invalidate" operation. The assumption is this is done to ensure that any dirty data addresses outside the address range (but part of the first or last cache lines) are cleaned/flushed so that data is not lost, which could happen if just an invalidate is issued. The problem is that these first/last partial cache lines are issued "clean & invalidate" and then "invalidate". This second "invalidate" is not required and worse can cause "lost" writes to addresses outside the address range but part of the cache line. If another component writes to its part of the cache line between the "clean & invalidate" and "invalidate" operations, the write can get lost. This fix is to remove the extra "invalidate" operation when unaligned addressed are used. A kernel module is available that has a stress test to reproduce the issue and a unit test of the updated v7_dma_inv_range(). It can be downloaded from http://ftp.sageembedded.com/outgoing/linux/cache-test-20181107.tgz. v7_dma_inv_range() is call by dmac_[un]map_area(addr, len, direction) when the direction is DMA_FROM_DEVICE. One can (I believe) successfully argue that DMA from a device to main memory should use buffers aligned to cache line size, because the "clean & invalidate" might overwrite data that the device just wrote using DMA. But if a driver does use unaligned buffers, at least this fix will prevent memory corruption outside the buffer. Signed-off-by:
Chris Cole <chris@sageembedded.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Anderson Luiz Alves authored
[ Upstream commit a7451560 ] Disable hardware level MAC learning because it breaks station roaming. When enabled it drops all frames that arrive from a MAC address that is on a different port at learning table. Signed-off-by:
Anderson Luiz Alves <alacn1@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Juha-Matti Tilli authored
[ Upstream commit fd6f32f7 ] These devices support read zero after trim (RZAT), as they advertise to the OS. However, the OS doesn't believe the SSDs unless they are explicitly whitelisted. Acked-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Juha-Matti Tilli <juha-matti.tilli@iki.fi> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit 6c3516fe ] I noticed that the Android v3.0.8 kernel on droid4 is using different keypad values from the mainline kernel and does not have issues with keys occasionally being stuck until pressed again. Turns out there was an earlier patch posted to fix this as "Input: omap-keypad: errata i689: Correct debounce time", but it was never reposted to fix use macros for timing calculations. This updated version is using macros, and also fixes the use of the input clock rate to use 32768KiHz instead of 32000KiHz. And we want to use the known good Android kernel values of 3 and 6 instead of 2 and 6 in the earlier patch. Reported-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 2e85c574 ] The > comparison should be >= or we write one element beyond the end of the unit->clk_table[] array. (The unit->clk_table[] array is allocated in the mmp_clk_init() function and it has unit->nr_clks elements). Fixes: 4661fda1 ("clk: mmp: add basic support functions for DT support") Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Yangtao Li authored
[ Upstream commit a51921c0 ] use of_node_put() to release the refcount. Signed-off-by:
Yangtao Li <tiny.windzz@gmail.com> Signed-off-by:
-
Yangtao Li authored
[ Upstream commit dac097c4 ] of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. This place is not doing this, so fix it. Signed-off-by:
-
Yangtao Li authored
[ Upstream commit 6bd520ab ] use of_node_put() to release the refcount. Signed-off-by:
-
Yangtao Li authored
[ Upstream commit 87d81a23 ] use of_node_put() to release the refcount. Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit 0a9a4304 ] If an asynchronous connection attempt completes while another task is in xprt_connect(), then the call to rpc_sleep_on() could end up racing with the call to xprt_wake_pending_tasks(). So add a second test of the connection state after we've put the task to sleep and set the XPRT_CONNECTING flag, when we know that there can be no asynchronous connection attempts still in progress. Fixes: 0b9e7943 ("SUNRPC: Move the test for XPRT_CONNECTING into...") Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
-
Toni Peltonen authored
[ Upstream commit 3b5b3a33 ] Previously when unbinding a slave the 802.3ad implementation only told partner that the port is not suitable for aggregation by setting the port aggregation state from aggregatable to individual. This is not enough. If the physical layer still stays up and we only unbinded this port from the bond there is nothing in the aggregation status alone to prevent the partner from sending traffic towards us. To ensure that the partner doesn't consider this port at all anymore we should also disable collecting and distributing to signal that this actor is going away. Also clear AD_STATE_SYNCHRONIZATION to ensure partner exits collecting + distributing state. I have tested this behaviour againts Arista EOS switches with mlx5 cards (physical link stays up even when interface is down) and simulated the same situation virtually Linux <-> Linux with two network namespaces running two veth device pairs. In both cases setting aggregation to individual doesn't alone prevent traffic from being to sent towards this port given that the link stays up in partners end. Partner still keeps it's end in collecting + distributing state and continues until timeout is reached. In most cases this means we are losing the traffic partner sends towards our port while we wait for timeout. This is most visible with slow periodic time (LACP rate slow). Other open source implementations like Open VSwitch and libreswitch, and vendor implementations like Arista EOS, seem to disable collecting + distributing to when doing similar port disabling/detaching/removing change. With this patch kernel implementation would behave the same way and ensure partner doesn't consider our actor viable anymore. Signed-off-by:
Toni Peltonen <peltzi@peltzi.fi> Signed-off-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Acked-by:
Jonathan Toppins <jtoppins@redhat.com> Signed-off-by:
-
Jose Abreu authored
[ Upstream commit 10d44343 ] Some ARC CPU's do not support unaligned loads/stores. Currently, generic implementation of reads{b/w/l}()/writes{b/w/l}() is being used with ARC. This can lead to misfunction of some drivers as generic functions do a plain dereference of a pointer that can be unaligned. Let's use {get/put}_unaligned() helpers instead of plain dereference of pointer in order to fix. The helpers allow to get and store data from an unaligned address whilst preserving the CPU internal alignment. According to [1], the use of these helpers are costly in terms of performance so we added an initial check for a buffer already aligned so that the usage of the helpers can be avoided, when possible. [1] Documentation/unaligned-memory-access.txt Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David Laight <David.Laight@ACULAB.COM> Tested-by:
Vitor Soares <soares@synopsys.com> Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Sean Paul authored
[ Upstream commit 3b712e43 ] Similar to the atomic helpers, we should enable vblank while we're waiting for the commit to finish. DPU needs this, MDP5 seems to work fine without it. Reviewed-by:
Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
-
YiFei Zhu authored
[ Upstream commit 79c2206d ] An affected screen resolution is 1366 x 768, which width is not divisible by 8, the default font width. On such screens, when longer lines are earlyprintk'ed, overflow-to-next-line can never trigger, due to the left-most x-coordinate of the next character always less than the screen width. Earlyprintk will infinite loop in trying to print the rest of the string but unable to, due to the line being full. This patch makes the trigger consider the right-most x-coordinate, instead of left-most, as the value to compare against the screen width threshold. Signed-off-by:
YiFei Zhu <zhuyifei1999@gmail.com> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arend van Spriel <arend.vanspriel@broadcom.com> Cc: Bhupesh Sharma <bhsharma@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Eric Snowberg <eric.snowberg@oracle.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jon Hunter <jonathanh@nvidia.com> Cc: Julien Thierry <julien.thierry@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Cc: Sedat Dilek <sedat.dilek@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20181129171230.18699-12-ard.biesheuvel@linaro.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Cathy Avery authored
[ Upstream commit 02f425f8 ] Currently pvscsi_remove calls free_irq more than once as pvscsi_release_resources and __pvscsi_shutdown both call pvscsi_shutdown_intr. This results in a 'Trying to free already-free IRQ' warning and stack trace. To solve the problem pvscsi_shutdown_intr has been moved out of pvscsi_release_resources. Signed-off-by:
Cathy Avery <cavery@redhat.com> Reviewed-by:
Ewan D. Milne <emilne@redhat.com> Reviewed-by:
-
Fred Herard authored
[ Upstream commit 5db6dd14 ] This commit addresses NULL pointer dereference in iscsi_eh_session_reset. Reference should not be made to session->leadconn when session->state is set to ISCSI_STATE_TERMINATE. Signed-off-by:
Fred Herard <fred.herard@oracle.com> Reviewed-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by:
Lee Duncan <lduncan@suse.com> Signed-off-by:
-
Alexey Khoroshilov authored
[ Upstream commit 05cc09de ] There is no unregister netlink notifier and family on error paths in init_mac80211_hwsim(). Also there is an error path where hwsim_class is not destroyed. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Fixes: 62759361 ("mac80211-hwsim: Provide multicast event for HWSIM_CMD_NEW_RADIO") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Ilan Peer authored
[ Upstream commit 911a2648 ] Commit c470bdc1 ("mac80211: don't WARN on bad WMM parameters from buggy APs") handled cases where an AP reports a zeroed WMM IE. However, the condition that checks the validity accessed the wrong index in the ieee80211_tx_queue_params array, thus wrongly deducing that the parameters are invalid. Fix it. Fixes: c470bdc1 ("mac80211: don't WARN on bad WMM parameters from buggy APs") Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
[ Upstream commit c470bdc1 ] Apparently, some APs are buggy enough to send a zeroed WMM IE. Don't WARN on this since this is not caused by a bug on the client's system. This aligns the condition of the WARNING in drv_conf_tx with the validity check in ieee80211_sta_wmm_params. We will now pick the default values whenever we get a zeroed WMM IE. This has been reported here: https://bugzilla.kernel.org/show_bug.cgi?id=199161 Fixes: f409079b ("mac80211: sanity check CW_min/CW_max towards driver") Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Yunlei He authored
commit d4fdf8ba upstream. Mount fs with option noflush_merge, boot failed for illegal address fcc in function f2fs_issue_flush: if (!test_opt(sbi, FLUSH_MERGE)) { ret = submit_flush_wait(sbi); atomic_inc(&fcc->issued_flush); -> Here, fcc illegal return ret; } Signed-off-by:
Yunlei He <heyunlei@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> [bwh: Backported to 4.9: adjust context] Signed-off-by:
-
Brian Norris authored
commit 63238173 upstream. This reverts commit 7f3ef5de. It causes new warnings [1] on shutdown when running the Google Kevin or Scarlet (RK3399) boards under Chrome OS. Presumably our usage of DRM is different than what Marc and Heiko test. We're looking at a different approach (e.g., [2]) to replace this, but IMO the revert should be taken first, as it already propagated to -stable. [1] Report here: http://lkml.kernel.org/lkml/20181205030127.GA200921@google.com WARNING: CPU: 4 PID: 2035 at drivers/gpu/drm/drm_mode_config.c:477 drm_mode_config_cleanup+0x1c4/0x294 ... Call trace: drm_mode_config_cleanup+0x1c4/0x294 rockchip_drm_unbind+0x4c/0x8c component_master_del+0x88/0xb8 rockchip_drm_platform_remove+0x2c/0x44 rockchip_drm_platform_shutdown+0x20/0x2c platform_drv_shutdown+0x2c/0x38 device_shutdown+0x164/0x1b8 kernel_restart_prepare+0x40/0x48 kernel_restart+0x20/0x68 ... Memory manager not clean during takedown. WARNING: CPU: 4 PID: 2035 at drivers/gpu/drm/drm_mm.c:950 drm_mm_takedown+0x34/0x44 ... drm_mm_takedown+0x34/0x44 rockchip_drm_unbind+0x64/0x8c component_master_del+0x88/0xb8 rockchip_drm_platform_remove+0x2c/0x44 rockchip_drm_platform_shutdown+0x20/0x2c platform_drv_shutdown+0x2c/0x38 device_shutdown+0x164/0x1b8 kernel_restart_prepare+0x40/0x48 kernel_restart+0x20/0x68 ... [2] https://patchwork.kernel.org/patch/10556151/ https://www.spinics.net/lists/linux-rockchip/msg21342.html [PATCH] drm/rockchip: shutdown drm subsystem on shutdown Fixes: 7f3ef5de ("drm/rockchip: Allow driver to be shutdown on reboot/kexec") Cc: Jeffy Chen <jeffy.chen@rock-chips.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Vicente Bergas <vicencb@gmail.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: stable@vger.kernel.org Signed-off-by:
Brian Norris <briannorris@chromium.org> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20181205181657.177703-1-briannorris@chromium.orgSigned-off-by:
-
Radu Rendec authored
commit 78e7b15e upstream. The arch_teardown_msi_irqs() function assumes that controller ops pointers were already checked in arch_setup_msi_irqs(), but this assumption is wrong: arch_teardown_msi_irqs() can be called even when arch_setup_msi_irqs() returns an error (-ENOSYS). This can happen in the following scenario: - msi_capability_init() calls pci_msi_setup_msi_irqs() - pci_msi_setup_msi_irqs() returns -ENOSYS - msi_capability_init() notices the error and calls free_msi_irqs() - free_msi_irqs() calls pci_msi_teardown_msi_irqs() This is easier to see when CONFIG_PCI_MSI_IRQ_DOMAIN is not set and pci_msi_setup_msi_irqs() and pci_msi_teardown_msi_irqs() are just aliases to arch_setup_msi_irqs() and arch_teardown_msi_irqs(). The call to free_msi_irqs() upon pci_msi_setup_msi_irqs() failure seems legit, as it does additional cleanup; e.g. list_del(&entry->list) and kfree(entry) inside free_msi_irqs() do happen (MSI descriptors are allocated before pci_msi_setup_msi_irqs() is called and need to be cleaned up if that fails). Fixes: 6b2fd7ef ("PCI/MSI/PPC: Remove arch_msi_check_device()") Cc: stable@vger.kernel.org # v3.18+ Signed-off-by:
Radu Rendec <radu.rendec@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 2840f84f upstream. The following commands will cause a memory leak: # cd /sys/kernel/tracing # mkdir instances/foo # echo schedule > instance/foo/set_ftrace_filter # rmdir instances/foo The reason is that the hashes that hold the filters to set_ftrace_filter and set_ftrace_notrace are not freed if they contain any data on the instance and the instance is removed. Found by kmemleak detector. Cc: stable@vger.kernel.org Fixes: 591dffda ("ftrace: Allow for function tracing instance to filter functions") Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 3cec638b upstream. When create_event_filter() fails in set_trigger_filter(), the filter may still be allocated and needs to be freed. The caller expects the data->filter to be updated with the new filter, even if the new filter failed (we could add an error message by setting set_str parameter of create_event_filter(), but that's another update). But because the error would just exit, filter was left hanging and nothing could free it. Found by kmemleak detector. Cc: stable@vger.kernel.org Fixes: bac5fb97 ("tracing: Add and use generic set_trigger_filter() implementation") Reviewed-by:
Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by:
-
Aaro Koskinen authored
commit e8cde625 upstream. Since v2.6.22 or so there has been reports [1] about OMAP MMC being broken on OMAP15XX based hardware (OMAP5910 and OMAP310). The breakage seems to have been caused by commit 46a6730e ("mmc-omap: Fix omap to use MMC_POWER_ON") that changed clock enabling to be done on MMC_POWER_ON. This can happen multiple times in a row, and on 15XX the hardware doesn't seem to like it and the MMC just stops responding. Fix by memorizing the power mode and do the init only when necessary. Before the patch (on Palm TE): mmc0: new SD card at address b368 mmcblk0: mmc0:b368 SDC 977 MiB mmci-omap mmci-omap.0: command timeout (CMD18) mmci-omap mmci-omap.0: command timeout (CMD13) mmci-omap mmci-omap.0: command timeout (CMD13) mmci-omap mmci-omap.0: command timeout (CMD12) [x 6] mmci-omap mmci-omap.0: command timeout (CMD13) [x 6] mmcblk0: error -110 requesting status mmci-omap mmci-omap.0: command timeout (CMD8) mmci-omap mmci-omap.0: command timeout (CMD18) mmci-omap mmci-omap.0: command timeout (CMD13) mmci-omap mmci-omap.0: command timeout (CMD13) mmci-omap mmci-omap.0: command timeout (CMD12) [x 6] mmci-omap mmci-omap.0: command timeout (CMD13) [x 6] mmcblk0: error -110 requesting status mmcblk0: recovery failed! print_req_error: I/O error, dev mmcblk0, sector 0 Buffer I/O error on dev mmcblk0, logical block 0, async page read mmcblk0: unable to read partition table After the patch: mmc0: new SD card at address b368 mmcblk0: mmc0:b368 SDC 977 MiB mmcblk0: p1 The patch is based on a fix and analysis done by Ladislav Michl. Tested on OMAP15XX/OMAP310 (Palm TE), OMAP1710 (Nokia 770) and OMAP2420 (Nokia N810). [1] https://marc.info/?t=123175197000003&r=1&w=2 Fixes: 46a6730e ("mmc-omap: Fix omap to use MMC_POWER_ON") Reported-by:
Ladislav Michl <ladis@linux-mips.org> Reported-by:
Andrzej Zaborowski <balrogg@gmail.com> Tested-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Cc: stable@vger.kernel.org Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Jeff Moyer authored
commit a538e3ff upstream. Matthew pointed out that the ioctx_table is susceptible to spectre v1, because the index can be controlled by an attacker. The below patch should mitigate the attack for all of the aio system calls. Cc: stable@vger.kernel.org Reported-by:
Matthew Wilcox <willy@infradead.org> Reported-by:
Jeff Moyer <jmoyer@redhat.com> Signed-off-by:
-
Chen-Yu Tsai authored
commit 478b6767 upstream. Pin PH11 is used on various A83T board to detect a change in the OTG port's ID pin, as in when an OTG host cable is plugged in. The incorrect offset meant the gpiochip/irqchip was activating the wrong pin for interrupts. Fixes: 4730f33f ("pinctrl: sunxi: add allwinner A83T PIO controller support") Cc: <stable@vger.kernel.org> Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Acked-by:
Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Guenter Roeck authored
[ Upstream commit 64c3f648 ] Once in a while I see build errors similar to the following when building images from a clean tree. Building powerpc:virtex-ml507:44x/virtex5_defconfig ... failed ------------ Error log: arch/powerpc/boot/treeboot-akebono.c:37:20: fatal error: libfdt.h: No such file or directory Building powerpc:bamboo:smpdev:44x/bamboo_defconfig ... failed ------------ Error log: arch/powerpc/boot/treeboot-akebono.c:37:20: fatal error: libfdt.h: No such file or directory arch/powerpc/boot/treeboot-currituck.c:35:20: fatal error: libfdt.h: No such file or directory Rebuilds will succeed. Turns out that several source files in arch/powerpc/boot/ include libfdt.h, but Makefile dependencies are incomplete. Let's fix that. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Ingo Molnar authored
[ Upstream commit 8e7df2b5 ] While it uses %pK, there's still few reasons to read this file as non-root. Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Acked-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Davidlohr Bueso authored
[ Upstream commit a8ec14d4 ] Add a 'max_endpoint' parameter such that users may easily limit the size of the intervals that are randomly generated. Link: http://lkml.kernel.org/r/20170518174936.20265-4-dave@stgolabs.netSigned-off-by:
Davidlohr Bueso <dbueso@suse.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Davidlohr Bueso authored
[ Upstream commit 0b548e33 ] Fengguang reported soft lockups while running the rbtree and interval tree test modules. The logic for these tests all occur in init phase, and we currently are pounding with the default values for number of nodes and number of iterations of each test. Reduce the latter by two orders of magnitude. This does not influence the value of the tests in that one thousand times by default is enough to get the picture. Link: http://lkml.kernel.org/r/20171109161715.xai2dtwqw2frhkcm@linux-n805Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
