- 06 Oct, 2020 23 commits
-
-
Jakub Kicinski authored
We don't have good validation policy for existing unsigned int attrs which serve as flags (for new ones we could use NLA_BITFIELD32). With increased use of policy dumping having the validation be expressed as part of the policy is important. Add validation policy in form of a mask of supported/valid bits. Support u64 in the uAPI to be future-proof, but really for now the embedded mask member can only hold 32 bits, so anything with bit 32+ set will always fail validation. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
There's a number of policies which check if type is a uint or sint. Factor the checking against the list of value sizes to a helper for easier reuse. v2: - new patch Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
To get the most out of parsing by the core, and to allow dumping full policies we need to specify which policy applies to nested attrs. For headers it's ethnl_header_policy. $ sed -i 's@\(ETHTOOL_A_.*HEADER\].*=\) { .type = NLA_NESTED },@\1\n\t\tNLA_POLICY_NESTED(ethnl_header_policy),@' net/ethtool/* Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Since ethtool uses strict attribute validation there's no need to initialize all attributes in policy tables. 0 is NLA_UNSPEC which is going to be rejected. Remove the NLA_REJECTs. Similarly attributes above maxattrs are rejected, so there's no need to always size the policy tables to ETHTOOL_A_..._MAX. v2: - new patch Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Similarly to get commands wire up the policies of set commands to get parsing by the core and policy dumps. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Wire up policies for get commands in struct nla_policy of the ethtool family. Make use of genetlink code attr validation and parsing, as well as allow dumping policies to user space. For every ETHTOOL_MSG_*_GET: - add 'ethnl_' prefix to policy name - add extern declaration in net/ethtool/netlink.h - wire up the policy & attr in ethtool_genl_ops[]. - remove .request_policy and .max_attr from ethnl_request_ops. Obviously core only records the first "layer" of parsed attrs so we still need to parse the sub-attrs of the nested header attribute. v2: - merge of patches 1 and 2 from v1 - remove stray empty lines in ops - also remove .max_attr Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Fabian Frederick says: ==================== drivers/net: add sw_netstats_rx_add helper This small patchset creates netstats addition dev_sw_netstats_rx_add() based on dev_lstats_add() and replaces some open coding in both drivers/net and net branches. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fabian Frederick authored
use new helper for netstats settings Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fabian Frederick authored
use new helper for netstats settings Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fabian Frederick authored
use new helper for netstats settings Signed-off-by: Fabian Frederick <fabf@skynet.be> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fabian Frederick authored
use new helper for netstats settings Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fabian Frederick authored
use new helper for netstats settings Signed-off-by: Fabian Frederick <fabf@skynet.be> Acked-by: Harald Welte <laforge@gnumonks.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fabian Frederick authored
use new helper for netstats settings Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fabian Frederick authored
use new helper for netstats settings Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fabian Frederick authored
use new helper for netstats settings Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Fabian Frederick authored
some drivers/network protocols update rx bytes/packets under u64_stats_update_begin/end sequence. Add a specific helper like dev_lstats_add() Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Igor Russkikh says: ==================== net: atlantic: phy tunables from mac driver This series implements phy tunables settings via MAC driver callbacks. AQC 10G devices use integrated MAC+PHY solution, where PHY is fully controlled by MAC firmware. Therefore, it is not possible to implement separate phy driver for these. We use ethtool ops callbacks to implement downshift and EDPC tunables. v3: fixed flaw in EDPD logic, from Andrew v2: comments from Andrew ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Igor Russkikh authored
Mediadetect is another name for the EDPD (energy detect power down). This feature allows device to save extra power when no link is available. PHY goes into the extreme power saving mode and only periodically wakes up and checks for the link. AQC devices has fixed check period of 6 seconds The feature may increase linkup time. Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Igor Russkikh authored
PHY downshift allows phy to try renegotiate if link is unstable and can carry higher speed. AQC devices has integrated PHY which is controlled by MAC firmware. Thus, driver defines new ethtool callbacks to implement phy tunables via netdev. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Igor Russkikh authored
Define get/set phy tunable callbacks in ethtool ops. This will allow MAC drivers with integrated PHY still to implement these tunables. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
Currently skb_dump has a restriction to only dump full packet for the first 5 socket buffers, then only headers will be printed. Remove this arbitrary and confusing restriction, which is only documented vaguely ("up to") in the comments above the prototype. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
Currently we skip calling tcp_cleanup_rbuf() when packets are moved into the OoO queue or simply dropped. In both cases we still increment tp->copied_seq, and we should ask the TCP stack to check for ack. Fixes: c76c6956 ("mptcp: call tcp_cleanup_rbuf on subflows") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller authored
Rejecting non-native endian BTF overlapped with the addition of support for it. The rest were more simple overlapping changes, except the renesas ravb binding update, which had to follow a file move as well as a YAML conversion. Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 05 Oct, 2020 8 commits
-
-
git://git.infradead.org/linux-platform-drivers-x86Linus Torvalds authored
Pull x86 platform driver fixes from Andy Shevchenko: "We have some fixes for Tablet Mode reporting in particular, that users are complaining a lot about. Summary: - Attempt #3 of enabling Tablet Mode reporting w/o regressions - Improve battery recognition code in ASUS WMI driver - Fix Kconfig dependency warning for Fujitsu and LG laptop drivers - Add fixes in Thinkpad ACPI driver for _BCL method and NVRAM polling - Fix power supply extended topology in Mellanox driver - Fix memory leak in OLPC EC driver - Avoid static struct device in Intel PMC core driver - Add support for the touchscreen found in MPMAN Converter9 2-in-1 - Update MAINTAINERS to reflect the real state of affairs" * tag 'platform-drivers-x86-v5.9-2' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: thinkpad_acpi: re-initialize ACPI buffer size when reuse MAINTAINERS: Add Mark Gross and Hans de Goede as x86 platform drivers maintainers platform/x86: intel-vbtn: Switch to an allow-list for SW_TABLET_MODE reporting platform/x86: intel-vbtn: Revert "Fix SW_TABLET_MODE always reporting 1 on the HP Pavilion 11 x360" platform/x86: intel_pmc_core: do not create a static struct device platform/x86: mlx-platform: Fix extended topology configuration for power supply units platform/x86: pcengines-apuv2: Fix typo on define of AMD_FCH_GPIO_REG_GPIO55_DEVSLP0 platform/x86: fix kconfig dependency warning for FUJITSU_LAPTOP platform/x86: fix kconfig dependency warning for LG_LAPTOP platform/x86: thinkpad_acpi: initialize tp_nvram_state variable platform/x86: intel-vbtn: Fix SW_TABLET_MODE always reporting 1 on the HP Pavilion 11 x360 platform/x86: asus-wmi: Add BATC battery name to the list of supported platform/x86: asus-nb-wmi: Revert "Do not load on Asus T100TA and T200TA" platform/x86: touchscreen_dmi: Add info for the MPMAN Converter9 2-in-1 Documentation: laptops: thinkpad-acpi: fix underline length build warning Platform: OLPC: Fix memleak in olpc_ec_probe
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Make sure SKB control block is in the proper state during IPSEC ESP-in-TCP encapsulation. From Sabrina Dubroca. 2) Various kinds of attributes were not being cloned properly when we build new xfrm_state objects from existing ones. Fix from Antony Antony. 3) Make sure to keep BTF sections, from Tony Ambardar. 4) TX DMA channels need proper locking in lantiq driver, from Hauke Mehrtens. 5) Honour route MTU during forwarding, always. From Maciej Żenczykowski. 6) Fix races in kTLS which can result in crashes, from Rohit Maheshwari. 7) Skip TCP DSACKs with rediculous sequence ranges, from Priyaranjan Jha. 8) Use correct address family in xfrm state lookups, from Herbert Xu. 9) A bridge FDB flush should not clear out user managed fdb entries with the ext_learn flag set, from Nikolay Aleksandrov. 10) Fix nested locking of netdev address lists, from Taehee Yoo. 11) Fix handling of 32-bit DATA_FIN values in mptcp, from Mat Martineau. 12) Fix r8169 data corruptions on RTL8402 chips, from Heiner Kallweit. 13) Don't free command entries in mlx5 while comp handler could still be running, from Eran Ben Elisha. 14) Error flow of request_irq() in mlx5 is busted, due to an off by one we try to free and IRQ never allocated. From Maor Gottlieb. 15) Fix leak when dumping netlink policies, from Johannes Berg. 16) Sendpage cannot be performed when a page is a slab page, or the page count is < 1. Some subsystems such as nvme were doing so. Create a "sendpage_ok()" helper and use it as needed, from Coly Li. 17) Don't leak request socket when using syncookes with mptcp, from Paolo Abeni. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits) net/core: check length before updating Ethertype in skb_mpls_{push,pop} net: mvneta: fix double free of txq->buf net_sched: check error pointer in tcf_dump_walker() net: team: fix memory leak in __team_options_register net: typhoon: Fix a typo Typoon --> Typhoon net: hinic: fix DEVLINK build errors net: stmmac: Modify configuration method of EEE timers tcp: fix syn cookied MPTCP request socket leak libceph: use sendpage_ok() in ceph_tcp_sendpage() scsi: libiscsi: use sendpage_ok() in iscsi_tcp_segment_map() drbd: code cleanup by using sendpage_ok() to check page for kernel_sendpage() tcp: use sendpage_ok() to detect misused .sendpage nvme-tcp: check page by sendpage_ok() before calling kernel_sendpage() net: add WARN_ONCE in kernel_sendpage() for improper zero-copy send net: introduce helper sendpage_ok() in include/linux/net.h net: usb: pegasus: Proper error handing when setting pegasus' MAC address net: core: document two new elements of struct net_device netlink: fix policy dump leak net/mlx5e: Fix race condition on nhe->n pointer in neigh update net/mlx5e: Fix VLAN create flow ...
-
Jisheng Zhang authored
Convert m88e1318_get_wol() to use the well implemented phy_read_paged() instead of open coding it. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Reviewed-by: Marek Behún <kabel@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
A driver may refuse to enable VLAN filtering for any reason beyond what the DSA framework cares about, such as: - having tc-flower rules that rely on the switch being VLAN-aware - the particular switch does not support VLAN, even if the driver does (the DSA framework just checks for the presence of the .port_vlan_add and .port_vlan_del pointers) - simply not supporting this configuration to be toggled at runtime Currently, when a driver rejects a configuration it cannot support, it does this from the commit phase, which triggers various warnings in switchdev. So propagate the prepare phase to drivers, to give them the ability to refuse invalid configurations cleanly and avoid the warnings. Since we need to modify all function prototypes and check for the prepare phase from within the drivers, take that opportunity and move the existing driver restrictions within the prepare phase where that is possible and easy. Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Woojung Huh <woojung.huh@microchip.com> Cc: Microchip Linux Driver Support <UNGLinuxDriver@microchip.com> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Landen Chao <Landen.Chao@mediatek.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Jonathan McDowell <noodles@earth.li> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Aaron Ma authored
Evaluating ACPI _BCL could fail, then ACPI buffer size will be set to 0. When reuse this ACPI buffer, AE_BUFFER_OVERFLOW will be triggered. Re-initialize buffer size will make ACPI evaluate successfully. Fixes: 46445b6b ("thinkpad-acpi: fix handle locate for video and query of _BCL") Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-
David S. Miller authored
Rikard Falkeborn says: ==================== net: Constify struct genl_small_ops Make a couple of static struct genl_small_ops const to allow the compiler to put them in read-only memory. Patches are independent. v2: Rebase on net-next, genl_ops -> genl_small_ops ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rikard Falkeborn authored
The only usage of these is to assign their address to the small_ops field in the genl_family struct, which is a const pointer, and applying ARRAY_SIZE() on them. Make them const to allow the compiler to put them in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rikard Falkeborn authored
The only usages of mptcp_pm_ops is to assign its address to the small_ops field of the genl_family struct, which is a const pointer, and applying ARRAY_SIZE() on it. Make it const to allow the compiler to put it in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 04 Oct, 2020 9 commits
-
-
Linus Torvalds authored
-
Xie He authored
1. Keep the code for the normal (non-error) flow at the lowest indentation level. And use "goto drop" for all error handling. 2. Replace code that pads short Ethernet frames with a "__skb_pad" call. 3. Change "dev_kfree_skb" to "kfree_skb" in error handling code. "kfree_skb" is the correct function to call when dropping an skb due to an error. "dev_kfree_skb", which is an alias of "consume_skb", is for dropping skbs normally (not due to an error). Cc: Krzysztof Halasa <khc@pm.waw.pl> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Guillaume Nault authored
Openvswitch allows to drop a packet's Ethernet header, therefore skb_mpls_push() and skb_mpls_pop() might be called with ethernet=true and mac_len=0. In that case the pointer passed to skb_mod_eth_type() doesn't point to an Ethernet header and the new Ethertype is written at unexpected locations. Fix this by verifying that mac_len is big enough to contain an Ethernet header. Fixes: fa4e0f88 ("net/sched: fix corrupted L2 header with MPLS 'push' and 'pop' actions") Signed-off-by: Guillaume Nault <gnault@redhat.com> Acked-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tom Rix authored
clang static analysis reports this problem: drivers/net/ethernet/marvell/mvneta.c:3465:2: warning: Attempt to free released memory kfree(txq->buf); ^~~~~~~~~~~~~~~ When mvneta_txq_sw_init() fails to alloc txq->tso_hdrs, it frees without poisoning txq->buf. The error is caught in the mvneta_setup_txqs() caller which handles the error by cleaning up all of the txqs with a call to mvneta_txq_sw_deinit which also frees txq->buf. Since mvneta_txq_sw_deinit is a general cleaner, all of the partial cleaning in mvneta_txq_sw_deinit()'s error handling is not needed. Fixes: 2adb719d ("net: mvneta: Implement software TSO") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Cong Wang authored
Although we take RTNL on dump path, it is possible to skip RTNL on insertion path. So the following race condition is possible: rtnl_lock() // no rtnl lock mutex_lock(&idrinfo->lock); // insert ERR_PTR(-EBUSY) mutex_unlock(&idrinfo->lock); tc_dump_action() rtnl_unlock() So we have to skip those temporary -EBUSY entries on dump path too. Reported-and-tested-by: syzbot+b47bc4f247856fb4d9e1@syzkaller.appspotmail.com Fixes: 0fedc63f ("net_sched: commit action insertions together") Cc: Vlad Buslov <vladbu@mellanox.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Anant Thazhemadam authored
The variable "i" isn't initialized back correctly after the first loop under the label inst_rollback gets executed. The value of "i" is assigned to be option_count - 1, and the ensuing loop (under alloc_rollback) begins by initializing i--. Thus, the value of i when the loop begins execution will now become i = option_count - 2. Thus, when kfree(dst_opts[i]) is called in the second loop in this order, (i.e., inst_rollback followed by alloc_rollback), dst_optsp[option_count - 2] is the first element freed, and dst_opts[option_count - 1] does not get freed, and thus, a memory leak is caused. This memory leak can be fixed, by assigning i = option_count (instead of option_count - 1). Fixes: 80f7c668 ("team: add support for per-port options") Reported-by: syzbot+69b804437cfec30deac3@syzkaller.appspotmail.com Tested-by: syzbot+69b804437cfec30deac3@syzkaller.appspotmail.com Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: net-next updates. This series starts off with the usual update of the firmware interface spec. A new firmware status bit in the interface will be used in patch add the infrastructure to read the firmware status very early during driver probe and this will allow patch #4 to do the recovery if needed. The rest of the patches add improvements to the current RX reset logic by localizing the reset to the affected RX ring only and to reset only if firmware has determined that the RX ring is in permanent error state. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Currently, the driver will schedule RX ring reset when we get a buffer error in the RX completion record. These RX buffer errors can be due to normal out-of-buffer conditions or a permanent error in the RX ring. Because the driver cannot distinguish between these 2 conditions, we assume all these buffer errors require reset. This is very disruptive when it is just a normal out-of-buffer condition. Newer firmware will now monitor the rings for the permanent failure and will send a notification to the driver when it happens. This allows the driver to reset only when such a notification is received. In environments where we have predominently out-of-buffer conditions, we now can avoid these unnecessary resets. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
There is logic in the RX path to detect unexpected handles in the RX completion. We'll print a warning and schedule a reset. The next expected handle is then set to 0xffff which is guaranteed to not match any valid handle. This will force all remaining packets in the ring to be discarded before the reset. There can be hundreds of these packets remaining in the ring and there is no need to print the warnings for these forced errors. Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-