- 05 Jan, 2012 8 commits
-
-
Eric Dumazet authored
This adds support for byte queue limits (BQL) Since this driver collects bytes count in 'bytecount' field, use it also in igb_tx_map() Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> CC: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
A global variable is currently used to hold the virtual address of the CE4100 MDIO base register address. Store the address in the e1000_hw structure and update macros accordingly. Signed-off-by:
Florian Fainelli <ffainelli@freebox.fr> Tested-by:
-
Florian Fainelli authored
We are not unmapping ce4100_gbe_mdio_base_virt in exit path in case we are running on a CE4100 adapter, fix that. Signed-off-by:
-
Jesse Brandeburg authored
As reported by Steven Rostedt, e1000 has a lockdep splat added during the recent merge window. The issue is that cancel_delayed_work is called while holding our private mutex. There is no reason that I can see to hold the mutex during pci shutdown, it was more just paranoia that I put the mutex_lock around the call to e1000_down. In a quick survey lots of drivers handle locking differently when being called by the pci layer. The assumption here is that we don't need the mutexes' protection in this function because the driver could not be unloaded while in the shutdown handler which is only called at reboot or poweroff. Reported-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
-
John W. Linville authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/b43legacy/dma.c
-
John W. Linville authored
The ath6kl driver is causing build failures when the ath6kl bits are not built as modules. A better fix is forthcoming in a future release, but for now lets revert the problematic code. This reverts the following commits: fde57764 d70385a2 59d954ddSigned-off-by:
John W. Linville <linville@tuxdriver.com>
-
-
Yogesh Ashok Powar authored
Signed-off-by:
Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by:
Nishant Sarmukadam <nishants@marvell.com> Signed-off-by:
-
- 04 Jan, 2012 32 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: fix CAN MAINTAINERS SCM tree type mwifiex: fix crash during simultaneous scan and connect b43: fix regression in PIO case ath9k: Fix kernel panic in AR2427 in AP mode CAN MAINTAINERS update net: fsl: fec: fix build for mx23-only kernel sch_qfq: fix overflow in qfq_update_start() Revert "Bluetooth: Increase HCI reset timeout in hci_dev_do_close"
-
Al Viro authored
bitmap size sanity checks should be done *before* allocating ->s_root; there their cleanup on failure would be correct. As it is, we do iput() on root inode, but leak the root dentry... Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Acked-by:
Josh Boyer <jwboyer@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Oleg Nesterov authored
This is the temporary simple fix for 3.2, we need more changes in this area. 1. do_signal_stop() assumes that the running untraced thread in the stopped thread group is not possible. This was our goal but it is not yet achieved: a stopped-but-resumed tracee can clone the running thread which can initiate another group-stop. Remove WARN_ON_ONCE(!current->ptrace). 2. A new thread always starts with ->jobctl = 0. If it is auto-attached and this group is stopped, __ptrace_unlink() sets JOBCTL_STOP_PENDING but JOBCTL_STOP_SIGMASK part is zero, this triggers WANR_ON(!signr) in do_jobctl_trap() if another debugger attaches. Change __ptrace_unlink() to set the artificial SIGSTOP for report. Alternatively we could change ptrace_init_task() to copy signr from current, but this means we can copy it for no reason and hide the possible similar problems. Acked-by:
Tejun Heo <tj@kernel.org> Cc: <stable@kernel.org> [3.1] Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
-
Oleg Nesterov authored
Test-case: int main(void) { int pid, status; pid = fork(); if (!pid) { for (;;) { if (!fork()) return 0; if (waitpid(-1, &status, 0) < 0) { printf("ERR!! wait: %m\n"); return 0; } } } assert(ptrace(PTRACE_ATTACH, pid, 0,0) == 0); assert(waitpid(-1, NULL, 0) == pid); assert(ptrace(PTRACE_SETOPTIONS, pid, 0, PTRACE_O_TRACEFORK) == 0); do { ptrace(PTRACE_CONT, pid, 0, 0); pid = waitpid(-1, NULL, 0); } while (pid > 0); return 1; } It fails because ->real_parent sees its child in EXIT_DEAD state while the tracer is going to change the state back to EXIT_ZOMBIE in wait_task_zombie(). The offending commit is 823b018e which moved the EXIT_DEAD check, but in fact we should not blame it. The original code was not correct as well because it didn't take ptrace_reparented() into account and because we can't really trust ->ptrace. This patch adds the additional check to close this particular race but it doesn't solve the whole problem. We simply can't rely on ->ptrace in this case, it can be cleared if the tracer is multithreaded by the exiting ->parent. I think we should kill EXIT_DEAD altogether, we should always remove the soon-to-be-reaped child from ->children or at least we should never do the DEAD->ZOMBIE transition. But this is too complex for 3.2. Reported-and-tested-by:Denys Vlasenko <vda.linux@googlemail.com> Tested-by:
Lukasz Michalik <lmi@ift.uni.wroc.pl> Acked-by:
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
* git://git.samba.org/sfrench/cifs-2.6: [CIFS] default ntlmv2 for cifs mount delayed to 3.3 cifs: fix bad buffer length check in coalesce_t2
-
Mihai Maruseac authored
This ensures a linear behaviour when filling /proc/net/if_inet6 thus making ifconfig run really fast on IPv6 only addresses. In fact, with this patch and the IPv4 one sent a while ago, ifconfig will run in linear time regardless of address type. IPv4 related patch: f04565dd dev: use name hash for dev_seq_ops ... Some statistics (running ifconfig > /dev/null on a different setup): iface count / IPv6 no-patch time / IPv6 patched time / IPv4 time ---------------------------------------------------------------- 6250 | 0.23 s | 0.13 s | 0.11 s 12500 | 0.62 s | 0.28 s | 0.22 s 25000 | 2.91 s | 0.57 s | 0.46 s 50000 | 11.37 s | 1.21 s | 0.94 s 128000 | 86.78 s | 3.05 s | 2.54 s Signed-off-by:
Mihai Maruseac <mmaruseac@ixiacom.com> Cc: Daniel Baluta <dbaluta@ixiacom.com> Signed-off-by:
-
Florian Fainelli authored
checkpatch.pl complained about the line exceding 80 columns, and the comment was actually on the same line as the code, fix that. Signed-off-by:
Florian Fainelli <florian@openwrt.org> Signed-off-by:
-
Florian Fainelli authored
instead of __attribute__((__aligned(size)__)) Signed-off-by:
-
Florian Fainelli authored
Bit 1 is the reset bit of the MAC status machine register, define and use it. Signed-off-by:
-
Florian Fainelli authored
MAC_RST bit is already defined, use it instead of 0x1 where applicable. Signed-off-by:
-
Florian Fainelli authored
Define more MCR0-register bits and use them in place of the bits values. Signed-off-by:
-
Florian Fainelli authored
Since the conversion to phylib (3831861b: r6040: implement phylib) some PHY-related variables and definitions are now useless, remove them. Signed-off-by:
-
Florian Fainelli authored
We should use an unique MDIO bus name which does not clash with anything else in the system like the Fixed MDIO bus. The bus is now named: r6040-<card number> which is unique in the system. Reported-by:
Vladimir Kolpakov <vova.kolpakov@gmail.com> Signed-off-by:
-
Neil Horman authored
Recently Dave noticed that a test we did in ipv6_add_addr to see if we next hop route for the interface we're adding an addres to was wrong (see commit 7ffbcecb). for one, it never triggers, and two, it was completely wrong to begin with. This test was meant to cover this section of RFC 4429: 3.3 Modifications to RFC 2462 Stateless Address Autoconfiguration * (modifies section 5.5) A host MAY choose to configure a new address as an Optimistic Address. A host that does not know the SLLAO of its router SHOULD NOT configure a new address as Optimistic. A router SHOULD NOT configure an Optimistic Address. This patch should bring us into proper compliance with the above clause. Since we only add a SLAAC address after we've received a RA which may or may not contain a source link layer address option, we can pass a pointer to that option to addrconf_prefix_rcv (which may be null if the option is not present), and only set the optimistic flag if the option was found in the RA. Change notes: (v2) modified the new parameter to addrconf_prefix_rcv to be a bool rather than a pointer to make its use more clear as per request from davem. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> CC: "David S. Miller" <davem@davemloft.net> CC: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by:
-
Mohammed Shafi Shajakhan authored
ieee80211_offchannel_enable_all_ps function is no longer used and looks like its logic is extensively handled in ieee80211_offchannel_stop_vifs Signed-off-by:
Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by:
-
Yogesh Ashok Powar authored
In case of firmware crash, reload the firmware and reconfigure it by triggering ieee80211_hw_restart; mac80211 utility function. V2 Addressed following comments from Lennert: - Stop the queues during reload - Removed atomic_t declaration for hw_restart - Extend the firmware reload support for sta firmware as well - Other misc changes Signed-off-by:
-
Yogesh Ashok Powar authored
Ideally, hardware/firmware initialization is complete after the drv_start routine. In mac80211 restart code (ieee80211_reconfig), defer calling the driver commands i.e. setup fragmentation threshold, rts threshold and coverage class till drv_start routine is called. Signed-off-by:
-
Mohammed Shafi Shajakhan authored
for EDMA chip AR_Q_TXE (tx enable for each queue) is read only Signed-off-by:
-
Gertjan van Wingerde authored
According to the latest Ralink vendor drivers, this seems to be the real RF chipset type. Signed-off-by:
Gertjan van Wingerde <gwingerde@gmail.com> Acked-by:
Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by:
-
Gertjan van Wingerde authored
Signed-off-by:
-
Jakub Kiciński authored
When USB driver requires padding at the end of frame or URB it will report this need by increasing return value of get_tx_data_len callback. Common USB code uses that return value as desired URB length. Ensure that appropriate part of skb's tailroom exists and is zeroed. Signed-off-by:
Jakub Kicinski <kubakici@wp.pl> Acked-by:
-
Jakub Kiciński authored
Older USB drivers does not append end padding to skb but instead report it in size of data to be transmitted to HW. rt2800usb should follow that behaviour. Custom write_tx_data callback which was adding pad to skb is not be needed any more. Thanks to this patch frames handed back from rt2800usb to mac80211 will no longer contain end padding. Signed-off-by:
-
Gertjan van Wingerde authored
Signed-off-by:
-
Gertjan van Wingerde authored
Signed-off-by:
-
Gertjan van Wingerde authored
According to the latest USB ID database these are all RT2770 / RT2870 / RT307x devices. Signed-off-by:
-
Christian Lamparter authored
Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
-
Larry Finger authored
Testing on the openSUSE wireless forum has shown that a Linksys WUSB54GC v3 with USB ID 1737:0077 works with rt2800usb when the ID is written to /sys/.../new_id. This ID can therefore be moved out of UNKNOWN. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Acked-by:
-
Mohammed Shafi Shajakhan authored
this is being recently introduced by the commit a85e1d55 Cc: Paul Stewart <pstew@google.com> Signed-off-by:
-
Stanislav Yakovlev authored
Removes reset_port since it isn't used anywhere as suggested by Johannes Berg. Signed-off-by:
Stanislav Yakovlev <stas.yakovlev@gmail.com> Signed-off-by:
-
Mohammed Shafi Shajakhan authored
kernel panic occurs when we create an IBSS mode and leave it for sometime without any joiner and this is introduced by the commit ec2b774e where we don't put proper braces for 'list_for_each_entry_safe' and we pass an invalid 'sta' pointer to __sta_info_destroy EIP is at __list_add+0xe/0xa0 EAX: f3b63db4 EBX: 00000000 ECX: eab88c1c EDX: 00000000 ESI: 00000000 EDI: 00000246 EBP: f3b63d80 ESP: f3b63d58 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process kworker/u:2 (pid: 198, ti=f3b62000 task=f3afbea0 task.ti=f3b62000) Stack: 00000000 00000000 f9ef9821 00000000 00000000 eab88c30 f3b63d80 c017f623 eab88bf0 eab88bf0 f3b63dd0 c066f925 00000000 00000002 00000000 f9ef9821 f3b63da0 c0180a2b eab88c1c eab88c30 00000002 f3afbea0 eab88bf4 f3b63db4 Call Trace: [<f9ef9821>] ? __ieee80211_stop_tx_ba_session+0x31/0x60 [mac80211] [<c017f623>] ? debug_mutex_add_waiter+0x23/0x60 [<c066f925>] __mutex_lock_common+0xd5/0x390 [<f9ef9821>] ? __ieee80211_stop_tx_ba_session+0x31/0x60 [mac80211] [<c0180a2b>] ? trace_hardirqs_off+0xb/0x10 [<c066fd37>] mutex_lock_nested+0x47/0x60 [<f9ef9821>] ? __ieee80211_stop_tx_ba_session+0x31/0x60 [mac80211] [<f9ef9821>] __ieee80211_stop_tx_ba_session+0x31/0x60 [mac80211] [<f9ef8989>] ieee80211_sta_tear_down_BA_sessions+0x39/0x60 [mac80211] [<f9ef1a67>] __sta_info_destroy+0x57/0x780 [mac80211] [<f9ef2223>] ieee80211_sta_expire+0x93/0xb0 [mac80211] [<f9efc8f6>] ieee80211_ibss_work+0x2d6/0x530 [mac80211] Cc: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by:
-
Mohammed Shafi Shajakhan authored
when we run high bandwidth UDP traffic and we trigger a scan, the scan state machine seems to be looping in SUSPEND->RESUME->DECISION->SUSPEND and SET_CHANNEL seems to be never called as 'tx_empty' is never true while running UDP traffic. fix this by settting SET_CHANNEL state when we get into RESUME state. Cc: Leela Kella <leela@qca.qualcomm.com> Signed-off-by:
-
