- Remove unused symbols: _fdata, _text; only _edata and _end are needed by
  head.S
- Remove unused sections: .sbss, .stab, .gptab.sdata, .gptab.sbss
- Change the alignment to 16 bytes to ensure it is greater than any
  fundamental type of a MIPS compiler.
- Clean up comments
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1381/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The compressed vmlinux.bin is only a temp file so it's ok to use the same
suffix .z for them (.gz,.lzo,.lzma...) to remove several lines and simpify
the maintenance (no need to add the "suffix_$(xxx) := suffix" line).
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
To: linux-mips <linux-mips@linux-mips.org>
Cc: Alexander Clouter <alex@digriz.org.uk>
Cc: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Patchwork: https://patchwork.linux-mips.org/patch/1323/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

---

Define ASIC address, memory preallocations, and initialization code for the
Gaia platform.
Signed-off-by: David VomLehn <dvomlehn@cisco.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1519/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Nvram_getenv should behave like cfe_getenv. cfe_getenv returns 0 on
success and -9 if the value was not found. If the input was wrong -8
will be returned by cfe_getenv.  Change nvram_getenv to do the same.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1520/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

We reserve the 3.75GB - 4GB region of PCIe address space for device to
device transfers, making the corresponding physical memory under
direct mapping unavailable for DMA.

To allow for PCIe DMA to all physical memory we map this chunk of
physical memory with BAR1.  Because of the resulting discontinuity in
the mapping function, we remove a page of memory at each end of the
range so multi-page DMA buffers can never be allocated that span the
range.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1535/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The sixth argument of notify_die() is a signal number, the fifth is a
trap number.

Instead of passing a signal number in a randomly selected argument,
pass it in the sixth.  Extract the exception code from regs and pass
that as the trap number.

Get rid of redundant cast, and remove some gratuitous spaces.

Nobody actually does anything with the signal number or trap number,
but we might as well populate them with sensible values.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1532/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

It is initialized to zero and only ever read.  Remove it, and pass zero in
its place.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1531/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS now has KProbes support, so kprobes.txt should reflect it.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
To: ananth@in.ibm.com
To: anil.s.keshavamurthy@intel.com
To: davem@davemloft.net
To: masami.hiramatsu.pt@hitachi.com
Cc: linux-kernel@vger.kernel.org
Cc: hschauhan@nulltrace.org
Patchwork: https://patchwork.linux-mips.org/patch/1527/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This KProbes example is a little useless if it doesn't print anything.
For MIPS print similar messages to those produced on x86 and PPC.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
To: ananth@in.ibm.com
To: anil.s.keshavamurthy@intel.com
To: davem@davemloft.net
To: masami.hiramatsu.pt@hitachi.com
Cc: linux-kernel@vger.kernel.org
Cc: hschauhan@nulltrace.org
Patchwork: https://patchwork.linux-mips.org/patch/1528/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This patch is based on previous work by Sony and Himanshu Chauhan.

I have done some cleanup and implemented JProbes and KRETPROBES.  The
KRETPROBES part is pretty much copied verbatim from powerpc.  A possible
future enhance might be to factor out the common code.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: Himanshu Chauhan <hschauhan@nulltrace.org>
To: linux-mips@linux-mips.org
To: ananth@in.ibm.com,
To: anil.s.keshavamurthy@intel.com
To: davem@davemloft.net
To: masami.hiramatsu.pt@hitachi.com
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1525/
Patchwork: https://patchwork.linux-mips.org/patch/1530/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
To: ananth@in.ibm.com
To: anil.s.keshavamurthy@intel.com
To: davem@davemloft.net
To: masami.hiramatsu.pt@hitachi.com
Cc: linux-kernel@vger.kernel.org
Cc: hschauhan@nulltrace.org
Patchwork: https://patchwork.linux-mips.org/patch/1524/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
To: ananth@in.ibm.com
To: anil.s.keshavamurthy@intel.com
To: davem@davemloft.net
To: masami.hiramatsu.pt@hitachi.com
Cc: linux-kernel@vger.kernel.org,
Cc: hschauhan@nulltrace.org
Patchwork: https://patchwork.linux-mips.org/patch/1529/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This belongs into userland.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MSI-X interrupts are not supported yet for Octeon, return error if
MSI-X interrupts are requested by driver so that the driver will fall
back to use MSI interrupts.
Signed-off-by: Chandrakala Chavva <cchavva@caviumnetworks.com>
To: linux-mips@linux-mips.org
Cc: David Daney <ddaney@caviumnetworks.com>
Patchwork: https://patchwork.linux-mips.org/patch/1506/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1507/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The struct cpuinfo_mips.core field should be populated with the
physical core number.  For R2 CPUs, this is carried in the low 10 bits
of Ebase.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1505/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

While at it, drop 0x prefix.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
To: kernel-janitors@vger.kernel.org
Cc: Chris Dearman <chris@mips.com>
Cc: "Robert P. J. Day" <rpjday@crashcourse.ca>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: André Goddard Rosa <andre.goddard@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1458/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

LOONGSON2_PERFCNT_IRQ is used for the irq number of the performance
overflow interrupts; LOONGSON_PERFCNT_IRQ is unused so remove it.
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1494/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

On FuLoong-2F IP6 is shared by the performance counter overflow interrupt
and the Bonito northbridge interrupt.  To reduce overhead only call
do_IRQ() when oprofile is enabled to reduce overhead.

This patch adds an inline function do_perfcnt_IRQ() to hide the #if's ,
which can be shared by the other Loongson machines, i.e. gdium.
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1492/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

set_irq_trigger_mode() is not needed on all platforms so remove it
and move the related source code to mach_init_irq().

This will allow gdium to share the common irq.c without adding an empty
set_irq_trigger_mode().
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1493/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The OCTEON is a MIPS64 based SOC family with an on chip watchdog unit.

The driver is split into two source files one for the C code and one
for assembly.  Assembly is needed to handle the NMI and then print the
machine state before the reboot is triggered.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Marc Zyngier <maz@misterjones.org>
Cc: Thierry Reding <thierry.reding@avionic-design.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
To: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org,
Patchwork: https://patchwork.linux-mips.org/patch/1503/Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 create mode 100644 drivers/watchdog/octeon-wdt-main.c
 create mode 100644 drivers/watchdog/octeon-wdt-nmi.S

This is used by the forthcoming OCTEON watchdog patch.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
To: wim@iguana.be
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1498/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The forthcoming Octeon watchdog driver will use them.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
To: wim@iguana.be
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1499/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The forthcoming watchdog driver will use it.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
To: wim@iguana.be
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1499/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

A 'select EXPORT_UASM' in Kconfig will cause the uasm to be exported
for use in modules.  When it is exported, all the uasm data and code
cease to be __init and __initdata.

Also daddiu_bug cannot be __cpuinitdata if uasm is exported.  The
cleanest thing is to just make it normal data.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
To: wim@iguana.be
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1500/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

These are OCTEON specific instructions.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
To: wim@iguana.be
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1496/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
To: wim@iguana.be
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1495/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Power throttling make deterministic delay loops impossible.
Re-implement delays using the cycle counter.  This also allows us to
get rid of the code that calculates loops per jiffy.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1317/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Add support for the qi_lb60 (a.k.a QI Ben NanoNote) clamshell device.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1472/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Add support for the battery voltage measurement part of the JZ4740 ADC unit.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1416/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Add support for reading the ADCIN pin of the ADC unit on JZ4740 SoCs.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: lm-sensors@lm-sensors.org
Acked-by: Jean Delvare <khali@linux-fr.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1425/Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Add OHCI glue code for JZ4740 SoCs OHCI module.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: linux-usb@vger.kernel.org
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1411/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Matt Fleming <matt@console-pimps.org>
Cc: linux-mmc@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1463/
Patchwork: https://patchwork.linux-mips.org/patch/1523/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Add support for the NAND controller on JZ4740 SoCs.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: linux-mtd@lists.infradead.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1470/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Add support for the LCD controller on JZ4740 SoCs.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-fbdev@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1470/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Add support for the RTC unit on JZ4740 SoCs.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Paul Gortmaker <p_gortmaker@yahoo.com>
Cc: rtc-linux@googlegroups.com
Acked-by: Wan ZongShun <mcuos.com@gmail.com>
Cc: linux-mips@linux-mips.org 
Cc: linux-kernel@vger.kernel.org
Cc: Alessandro Zummo <a.zummo@towertech.it>,
Patchwork: https://patchwork.linux-mips.org/patch/1424/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Add the Kbuild files for the JZ4740 architecture and adds JZ4740 support
to the MIPS Kbuild files.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1406/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Add platform devices for all the JZ4740 platform drivers.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1469/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Add support for initializing arcs_cmdline on JZ4740 based machines and
provides a prom_putchar implementation.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1404/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The JZ4740 UART interface is almost 16550 compatible.
The UART module needs to be enabled by setting a bit in the FCR register
and it has support for receive timeout interrupts.  Instead of adding yet
another machine specific quirk to the 8250 serial driver we provide a
serial_out implementation which sets the required additional flags.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1403/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>