- 11 May, 2016 7 commits
-
-
Dan Streetman authored
commit da6ccaaa upstream. Make the "Attempted send on closed socket" error messages generated in nbd_request_handler() ratelimited. When the nbd socket is shutdown, the nbd_request_handler() function emits an error message for every request remaining in its queue. If the queue is large, this will spam a large amount of messages to the log. There's no need for a separate error message for each request, so this patch ratelimits it. In the specific case this was found, the system was virtual and the error messages were logged to the serial port, which overwhelmed it. Fixes: 4d48a542 ("nbd: fix I/O hang on disconnected nbds") Signed-off-by:
Dan Streetman <dan.streetman@canonical.com> Signed-off-by:
Markus Pargmann <mpa@pengutronix.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andy Shevchenko authored
commit 84cb36ca upstream. We forgot to remove the clock tree if something goes wrong in ->probe(). Add a call to intel_lpss_unregister_clock() on error path in ->probe() to fix the potential issue. Fixes: 4b45efe8 (mfd: Add support for Intel Sunrisepoint LPSS devices) Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Julian Anastasov authored
commit f719e375 upstream. Jiri Bohac is reporting for a problem where the attempt to reschedule existing connection to another real server needs proper redirect for the conntrack used by the IPVS connection. For example, when IPVS connection is created to NAT-ed real server we alter the reply direction of conntrack. If we later decide to select different real server we can not alter again the conntrack. And if we expire the old connection, the new connection is left without conntrack. So, the only way to redirect both the IPVS connection and the Netfilter's conntrack is to drop the SYN packet that hits existing connection, to wait for the next jiffie to expire the old connection and its conntrack and to rely on client's retransmission to create new connection as usually. Jiri Bohac provided a fix that drops all SYNs on rescheduling, I extended his patch to do such drops only for connections that use conntrack. Here is the original report from Jiri Bohac: Since commit dc7b3eb9 ("ipvs: Fix reuse connection if real server is dead"), new connections to dead servers are redistributed immediately to new servers. The old connection is expired using ip_vs_conn_expire_now() which sets the connection timer to expire immediately. However, before the timer callback, ip_vs_conn_expire(), is run to clean the connection's conntrack entry, the new redistributed connection may already be established and its conntrack removed instead. Fix this by dropping the first packet of the new connection instead, like we do when the destination server is not available. The timer will have deleted the old conntrack entry long before the first packet of the new connection is retransmitted. Fixes: dc7b3eb9 ("ipvs: Fix reuse connection if real server is dead") Signed-off-by:
Jiri Bohac <jbohac@suse.cz> Signed-off-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
Marco Angaroni authored
commit 7617a24f upstream. The IPVS SIP persistence engine is not able to parse the SIP header "Call-ID" when such header is inserted in the first positions of the SIP message. When IPVS is configured with "--pe sip" option, like for example: ipvsadm -A -u 1.2.3.4:5060 -s rr --pe sip -p 120 -o some particular messages (see below for details) do not create entries in the connection template table, which can be listed with: ipvsadm -Lcn --persistent-conn Problematic SIP messages are SIP responses having "Call-ID" header positioned just after message first line: SIP/2.0 200 OK [Call-ID header here] [rest of the headers] When "Call-ID" header is positioned down (after a few other headers) it is correctly recognized. This is due to the data offset used in get_callid function call inside ip_vs_pe_sip.c file: since dptr already points to the start of the SIP message, the value of dataoff should be initially 0. Otherwise the header is searched starting from some bytes after the first character of the SIP message. Fixes: 758ff033 ("IPVS: sip persistence engine") Signed-off-by:
Marco Angaroni <marcoangaroni@gmail.com> Acked-by:
-
Arnd Bergmann authored
commit 3f20efba upstream. ip_vs_fill_iph_skb_off() may not find an IP header, and gcc has determined that ip_vs_sip_fill_param() then incorrectly accesses the protocol fields: net/netfilter/ipvs/ip_vs_pe_sip.c: In function 'ip_vs_sip_fill_param': net/netfilter/ipvs/ip_vs_pe_sip.c:76:5: error: 'iph.protocol' may be used uninitialized in this function [-Werror=maybe-uninitialized] if (iph.protocol != IPPROTO_UDP) ^ net/netfilter/ipvs/ip_vs_pe_sip.c:81:10: error: 'iph.len' may be used uninitialized in this function [-Werror=maybe-uninitialized] dataoff = iph.len + sizeof(struct udphdr); ^ This adds a check for the ip_vs_fill_iph_skb_off() return code before looking at the ip header data returned from it. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: b0e010c5 ("ipvs: replace ip_vs_fill_ip4hdr with ip_vs_fill_iph_skb_off") Acked-by:
-
Hariprasad S authored
commit 32cc92c7 upstream. For T4, kernel mode qps don't use the user doorbell. User mode qps during flow control db ringing are forced into kernel, where user doorbell is treated as kernel doorbell and proper bar2 offset in bar2 virtual space is calculated, which incase of T4 is a bogus address, causing a kernel panic due to illegal write during doorbell ringing. In case of T4, kernel mode qp bar2 virtual address should be 0. Added T4 check during bar2 virtual address calculation to return 0. Fixed Bar2 range checks based on bar2 physical address. The below oops will be fixed <1>BUG: unable to handle kernel paging request at 000000000002aa08 <1>IP: [<ffffffffa011d800>] c4iw_uld_control+0x4e0/0x880 [iw_cxgb4] <4>PGD 1416a8067 PUD 15bf35067 PMD 0 <4>Oops: 0002 [#1] SMP <4>last sysfs file: /sys/devices/pci0000:00/0000:00:03.0/0000:02:00.4/infiniband/cxgb4_0/node_guid <4>CPU 5 <4>Modules linked in: rdma_ucm rdma_cm ib_cm ib_sa ib_mad ib_uverbs ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_CHECKSUM iptable_mangle iptable_filter ip_tables bridge autofs4 target_core_iblock target_core_file target_core_pscsi target_core_mod configfs bnx2fc cnic uio fcoe libfcoe libfc scsi_transport_fc scsi_tgt 8021q garp stp llc cpufreq_ondemand acpi_cpufreq freq_table mperf vhost_net macvtap macvlan tun kvm uinput microcode iTCO_wdt iTCO_vendor_support sg joydev serio_raw i2c_i801 i2c_core lpc_ich mfd_core e1000e ptp pps_core ioatdma dca i7core_edac edac_core shpchp ext3 jbd mbcache sd_mod crc_t10dif pata_acpi ata_generic ata_piix iw_cxgb4 iw_cm ib_core ib_addr cxgb4 ipv6 dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan] <4> Supermicro X8ST3/X8ST3 <4>RIP: 0010:[<ffffffffa011d800>] [<ffffffffa011d800>] c4iw_uld_control+0x4e0/0x880 [iw_cxgb4] <4>RSP: 0000:ffff880155a03db0 EFLAGS: 00010006 <4>RAX: 000000000000001d RBX: ffff88013ae5fc00 RCX: ffff880155adb180 <4>RDX: 000000000002aa00 RSI: 0000000000000001 RDI: ffff88013ae5fdf8 <4>RBP: ffff880155a03e10 R08: 0000000000000000 R09: 0000000000000001 <4>R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 <4>R13: 000000000000001d R14: ffff880156414ab0 R15: ffffe8ffffc05b88 <4>FS: 0000000000000000(0000) GS:ffff8800282a0000(0000) knlGS:0000000000000000 <4>CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b <4>CR2: 000000000002aa08 CR3: 000000015bd0e000 CR4: 00000000000007e0 <4>DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 <4>DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 <4>Process cxgb4 (pid: 394, threadinfo ffff880155a00000, task ffff880156414ab0) <4>Stack: <4> ffff880156415068 ffff880155adb180 ffff880155a03df0 ffffffffa00a344b <4><d> 00000000000003e8 ffff880155920000 0000000000000004 ffff880155920000 <4><d> ffff88015592d438 ffffffffa00a3860 ffff880155a03fd8 ffffe8ffffc05b88 <4>Call Trace: <4> [<ffffffffa00a344b>] ? enable_txq_db+0x2b/0x80 [cxgb4] <4> [<ffffffffa00a3860>] ? process_db_full+0x0/0xa0 [cxgb4] <4> [<ffffffffa00a38a6>] process_db_full+0x46/0xa0 [cxgb4] <4> [<ffffffff8109fda0>] worker_thread+0x170/0x2a0 <4> [<ffffffff810a6aa0>] ? autoremove_wake_function+0x0/0x40 <4> [<ffffffff8109fc30>] ? worker_thread+0x0/0x2a0 <4> [<ffffffff810a660e>] kthread+0x9e/0xc0 <4> [<ffffffff8100c28a>] child_rip+0xa/0x20 <4> [<ffffffff810a6570>] ? kthread+0x0/0xc0 <4> [<ffffffff8100c280>] ? child_rip+0x0/0x20 <4>Code: e9 ba 00 00 00 66 0f 1f 44 00 00 44 8b 05 29 07 02 00 45 85 c0 0f 85 71 02 00 00 8b 83 70 01 00 00 45 0f b7 ed c1 e0 0f 44 09 e8 <89> 42 08 0f ae f8 66 c7 83 82 01 00 00 00 00 44 0f b7 ab dc 01 <1>RIP [<ffffffffa011d800>] c4iw_uld_control+0x4e0/0x880 [iw_cxgb4] <4> RSP <ffff880155a03db0> <4>CR2: 000000000002aa08` Based on original work by Bharat Potnuri <bharat@chelsio.com> Fixes: 74217d4c ("iw_cxgb4: support for bar2 qid densities exceeding the page size") Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Reviewed-by:
Leon Romanovsky <leon@leon.nu> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit e924c60d which was commit 7f821fc9 upstream. It shouldn't have been applied as the original was already in 4.4. Reported-by:
Jiri Slaby <jslaby@suse.cz> Cc: Michael Neuling <mikey@neuling.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
- 04 May, 2016 33 commits
-
-
Greg Kroah-Hartman authored
-
Dan Carpenter authored
commit c4924e92 upstream. The info->status[] array has 3 elements. We are using size MAX77843_MUIC_IRQ_NUM (16) instead of MAX77843_MUIC_STATUS_NUM (3) as intended. Fixes: 135d9f7d ('extcon: max77843: Clear IRQ bits state before request IRQ') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Jaewon Kim <jaewon02.kim@samsung.com> Reviewed-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> [cw00.choi: Modify the patch title] Signed-off-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
-
Arnd Bergmann authored
commit 042d4460 upstream. The newly added STM code uses SRCU, but does not ensure that this code is part of the kernel: drivers/built-in.o: In function `stm_source_link_show': include/linux/srcu.h:221: undefined reference to `__srcu_read_lock' include/linux/srcu.h:238: undefined reference to `__srcu_read_unlock' drivers/built-in.o: In function `stm_source_link_drop': include/linux/srcu.h:221: undefined reference to `__srcu_read_lock' include/linux/srcu.h:238: undefined reference to `__srcu_read_unlock' This adds a Kconfig 'select' statement like all the other SRCU using drivers have. Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by:
-
Arnd Bergmann authored
commit 3deb9438 upstream. gcc-6 found a dubious indentation in the megasas_mgmt_fw_ioctl function: drivers/scsi/megaraid/megaraid_sas_base.c: In function 'megasas_mgmt_fw_ioctl': drivers/scsi/megaraid/megaraid_sas_base.c:6658:4: warning: statement is indented as if it were guarded by... [-Wmisleading-indentation] kbuff_arr[i] = NULL; ^~~~~~~~~ drivers/scsi/megaraid/megaraid_sas_base.c:6653:3: note: ...this 'if' clause, but it is not if (kbuff_arr[i]) ^~ The code is actually correct, as there is no downside in clearing a NULL pointer again. This clarifies the code and avoids the warning by adding extra curly braces. Signed-off-by:
Hannes Reinecke <hare@suse.com> Acked-by:
Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
NeilBrown authored
commit a6ab1e81 upstream. sunrpc_cache_pipe_upcall() can detect a race if CACHE_PENDING is no longer set. In this case it aborts the queuing of the upcall. However it has already taken a new counted reference on "h" and doesn't "put" it, even though it frees the data structure holding the reference. So let's delay the "cache_get" until we know we need it. Fixes: f9e1aedc ("sunrpc/cache: remove races with queuing an upcall.") Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Caesar Wang authored
commit 43b4eb9f upstream. As the Dan report the smatch check the thermal driver warning: drivers/thermal/rockchip_thermal.c:551 rockchip_configure_from_dt() warn: impossible condition '(thermal->tshut_temp > ((~0 >> 1))) => (s32min-s32max > s32max)' Although The shut_temp read from DT is u32,the temperature is currently represented as int not long in the thermal driver. Let's change to make shut_temp instead of the thermal->tshut_temp for the condition. Fixes: commit 437df217 ("thermal: rockchip: consistently use int for temperatures") Reported-by:
Caesar Wang <wxt@rock-chips.com> Signed-off-by:
Eduardo Valentin <edubezval@gmail.com> Signed-off-by:
-
Al Viro authored
commit 6b87b70c upstream. Prior to 3.13 make allmodconfig KCONFIG_ALLCONFIG=/dev/null used to be equivalent to make allmodconfig; these days it hardwires MODULES to n. In fact, any KCONFIG_ALLCONFIG that doesn't set MODULES explicitly is treated as if it set it to n. Regression had been introduced by commit cfa98f ("kconfig: do not override symbols already set"); what happens is that conf_read_simple() does sym_calc_value(modules_sym) on exit, which leaves SYMBOL_VALID set and has conf_set_all_new_symbols() skip modules_sym. It's pretty easy to fix - simply move that call of sym_calc_value() into the callers, except for the ones in KCONFIG_ALLCONFIG handling. Objections? Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Fixes: cfa98f2e ("kconfig: do not override symbols already set") Signed-off-by:
Michal Marek <mmarek@suse.com> Signed-off-by:
-
Guo-Fu Tseng authored
commit 81422e67 upstream. According to Documentation/power/devices.txt The driver should not use device_set_wakeup_enable() which is the policy for user to decide. Using device_init_wakeup() to initialize dev->power.should_wakeup and dev->power.can_wakeup on driver initialization. And use device_may_wakeup() on suspend to decide if WoL function should be enabled on NIC. Reported-by:
Diego Viola <diego.viola@gmail.com> Signed-off-by:
Guo-Fu Tseng <cooldavid@cooldavid.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Guo-Fu Tseng authored
commit 0772a99b upstream. Otherwise it might be back on resume right after going to suspend in some hardware. Reported-by:
-
Fabio Estevam authored
commit 33b96d2c upstream. Currently we have an incorrect behaviour when multiple devices are present under the weim node. For example: &weim { ... status = "okay"; sram@0,0 { ... status = "okay"; }; mram@0,0 { ... status = "disabled"; }; }; In this case only the 'sram' device should be probed and not 'mram'. However what happens currently is that the status variable is ignored, causing the 'sram' device to be disabled and 'mram' to be enabled. Change the weim_parse_dt() function to use for_each_available_child_of_node()so that the devices marked with 'status = disabled' are not probed. Suggested-by:
Wolfgang Netbal <wolfgang.netbal@sigmatek.at> Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by:
Sascha Hauer <s.hauer@pengutronix.de> Acked-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Robert Jarzmik authored
commit 07c6b2d0 upstream. Since the switch from mmp_pdma to pxa_dma driver for pxa architectures, the pxa_dma requires 2 arguments, namely the requestor line and the requested priority. Fix the only left device node which was still passing only one argument, making the pxa3xx-nand driver misbehave in a device-tree configuration, ie. failing all data transfers. Fixes: c943646d ("ARM: dts: pxa: add dma engine node to pxa3xx-nand") Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Lior Amsalem authored
commit b3a7f31e upstream. The Armada 375 has the same SATA IP as Armada 370 and Armada XP, which requires the PHY speed to be set in the LP_PHY_CTL register for SATA hotplug to work. Therefore, this commit updates the compatible string used to describe the SATA IP in Armada 375 from marvell,orion-sata to marvell,armada-370-sata. Fixes: 4de59085 ("ARM: mvebu: add Device Tree description of the Armada 375 SoC") Signed-off-by:
Lior Amsalem <alior@marvell.com> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
Arnd Bergmann authored
commit dc7eb9d5 upstream. We cannot select a symbol that has disabled dependencies, so we get a warning if we ever enable EXYNOS_THERMAL without also turning on THERMAL_OF: warning: (ARCH_EXYNOS) selects EXYNOS_THERMAL which has unmet direct dependencies (THERMAL && (ARCH_EXYNOS || COMPILE_TEST) && THERMAL_OF) This adds another 'select' in the platform code to avoid that case. Alternatively, we could decide to not select EXYNOS_THERMAL here and instead make it a user option. Signed-off-by:
-
Arnd Bergmann authored
commit ef2b1d77 upstream. The atlas7 clock controller driver registers a reset controller for itself, which causes a link error when the subsystem is disabled: drivers/built-in.o: In function `atlas7_clk_init': drivers/clk/sirf/clk-atlas7.c:1681: undefined reference to `reset_controller_register' As the clk driver does not have a Kconfig symbol for itself but it always built-in when the platform is enabled, we have to ensure that the reset controller subsystem is also built-in in this case. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Fixes: 301c5d29 ("clk: sirf: add CSR atlas7 clk and reset support") Signed-off-by:
-
Pali Rohár authored
commit 98f42221 upstream. Based on CPU type choose generic omap3 or omap3430 specific cpuidle parameters. Parameters for omap3430 were measured on Nokia N900 device and added by commit 5a1b1d3a ("OMAP3: RX-51: Pass cpu idle parameters") which were later removed by commit 231900af ("ARM: OMAP3: cpuidle - remove rx51 cpuidle parameters table") due to huge code complexity. This patch brings cpuidle parameters for omap3430 devices again, but uses simple condition based on CPU type. Fixes: 231900af ("ARM: OMAP3: cpuidle - remove rx51 cpuidle parameters table") Signed-off-by:
Pali Rohár <pali.rohar@gmail.com> Acked-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Jan Kara authored
commit 01127848 upstream. When doing delayed allocation, update of on-disk inode size is postponed until IO submission time. However hole punch or zero range fallocate calls can end up discarding the tail page cache page and thus on-disk inode size would never be properly updated. Make sure the on-disk inode size is updated before truncating page cache. Signed-off-by:
Jan Kara <jack@suse.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Jan Kara authored
commit 32ebffd3 upstream. Current code implementing FALLOC_FL_COLLAPSE_RANGE and FALLOC_FL_INSERT_RANGE is prone to races with buffered writes and page faults. If buffered write or write via mmap manages to squeeze between filemap_write_and_wait_range() and truncate_pagecache() in the fallocate implementations, the written data is simply discarded by truncate_pagecache() although it should have been shifted. Fix the problem by moving filemap_write_and_wait_range() call inside i_mutex and i_mmap_sem. That way we are protected against races with both buffered writes and page faults. Signed-off-by:
-
Jan Kara authored
commit 17048e8a upstream. Currently ext4_alloc_file_blocks() was handling protection against unlocked DIO. However we now need to sometimes call it under i_mmap_sem and sometimes not and DIO protection ranks above it (although strictly speaking this cannot currently create any deadlocks). Also ext4_zero_range() was actually getting & releasing unlocked DIO protection twice in some cases. Luckily it didn't introduce any real bug but it was a land mine waiting to be stepped on. So move DIO protection out from ext4_alloc_file_blocks() into the two callsites. Signed-off-by:
-
Jan Kara authored
commit ea3d7209 upstream. Currently, page faults and hole punching are completely unsynchronized. This can result in page fault faulting in a page into a range that we are punching after truncate_pagecache_range() has been called and thus we can end up with a page mapped to disk blocks that will be shortly freed. Filesystem corruption will shortly follow. Note that the same race is avoided for truncate by checking page fault offset against i_size but there isn't similar mechanism available for punching holes. Fix the problem by creating new rw semaphore i_mmap_sem in inode and grab it for writing over truncate, hole punching, and other functions removing blocks from extent tree and for read over page faults. We cannot easily use i_data_sem for this since that ranks below transaction start and we need something ranking above it so that it can be held over the whole truncate / hole punching operation. Also remove various workarounds we had in the code to reduce race window when page fault could have created pages with stale mapping information. Signed-off-by:
-
Borislav Petkov authored
commit f594bae0 upstream. I'm surprised this remained undocumented since at least 2011. And it is actually a very useful switch, as Steve and I came to realize recently. Add the text from 2cba3ffb ("perf stat: Add -d -d and -d -d -d options to show more CPU events") which added the incrementing aspect to -d. Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Marcin Ślusarz authored
commit 89fee59b upstream. Steam frequently puts game binaries in folders with spaces. Note: "(deleted)" markers are now treated as part of the file name. Signed-off-by:
Marcin Ślusarz <marcin.slusarz@gmail.com> Acked-by:
Namhyung Kim <namhyung@kernel.org> Fixes: 60648033 ("perf tools: Use sscanf for parsing /proc/pid/maps") Link: http://lkml.kernel.org/r/20160119190303.GA17579@marcin-Inspiron-7720Signed-off-by:
-
Namhyung Kim authored
commit c221acb0 upstream. When this feature was introduced a check was made if there was a resolved symbol under the cursor, it got lost in commit ea7cd592 ("perf hists browser: Split popup menu actions - part 2"), reinstate it. Signed-off-by:
-
Ezequiel García authored
commit 20c07a5b upstream. Since commit 807f16d4 ("mtd: core: set some defaults when dev.parent is set"), it's now legal for drivers to call nand_scan and nand_scan_ident without setting mtd.owner. Drop the check and while at it remove the BUG() abuse. Fixes: 807f16d4 ("mtd: core: set some defaults when dev.parent is set") Signed-off-by:
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Acked-by:
Boris Brezillon <boris.brezillon@free-electrons.com> [Brian: editorial note - while commit 807f16d4 wasn't explicitly broken, some follow-up commits in the v4.4 release broke a few drivers, since they would hit this BUG() if they used nand_scan() and were built as modules] Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Florian Fainelli authored
commit d267aefc upstream. The BRCMNAND controller revision 7.1 is almost 100% compatible with the previous v6.0 register offset layout, except for the Correctable Error Reporting Threshold registers. Fix this by adding another table with the correct offsets for CORR_THRESHOLD and CORR_THRESHOLD_EXT. Fixes: 27c5b17c ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Cyrille Pitchen authored
commit 3b5394a3 upstream. This patch remove the micron_quad_enable() function which force the Quad SPI mode. However, once this mode is enabled, the Micron memory expect ALL commands to use the SPI 4-4-4 protocol. Hence a failure does occur when calling spi_nor_wait_till_ready() right after the update of the Enhanced Volatile Configuration Register (EVCR) in the micron_quad_enable() as the SPI controller driver is not aware about the protocol change. Since there is almost no performance increase using Fast Read 4-4-4 commands instead of Fast Read 1-1-4 commands, we rather keep on using the Extended SPI mode than enabling the Quad SPI mode. Let's take the example of the pretty standard use of 8 dummy cycles during Fast Read operations on 64KB erase sectors: Fast Read 1-1-4 requires 8 cycles for the command, then 24 cycles for the 3byte address followed by 8 dummy clock cycles and finally 65536*2 cycles for the read data; so 131112 clock cycles. On the other hand the Fast Read 4-4-4 would require 2 cycles for the command, then 6 cycles for the 3byte address followed by 8 dummy clock cycles and finally 65536*2 cycles for the read data. So 131088 clock cycles. The theorical bandwidth increase is 0.0%. Now using Fast Read operations on 512byte pages: Fast Read 1-1-4 needs 8+24+8+(512*2) = 1064 clock cycles whereas Fast Read 4-4-4 would requires 2+6+8+(512*2) = 1040 clock cycles. Hence the theorical bandwidth increase is 2.3%. Consecutive reads for non sequential pages is not a relevant use case so The Quad SPI mode is not worth it. mtd_speedtest seems to confirm these figures. Signed-off-by:
Cyrille Pitchen <cyrille.pitchen@atmel.com> Fixes: 548cd3ab ("mtd: spi-nor: Add quad I/O support for Micron SPI NOR") Signed-off-by:
-
Geert Uytterhoeven authored
commit ff1cab37 upstream. The BSP team noticed that there is spin/mutex lock issue on sh-sci when CPUFREQ is used. The issue is that the notifier function may call mutex_lock() while the spinlock is held, which can lead to a BUG(). This may happen if CPUFREQ is changed while another CPU calls clk_get_rate(). Taking the spinlock was added to the notifier function in commit e552de24 ("sh-sci: add platform device private data"), to protect the list of serial ports against modification during traversal. At that time the Common Clock Framework didn't exist yet, and clk_get_rate() just returned clk->rate without taking a mutex. Note that since commit d535a230 ("serial: sh-sci: Require a device per port mapping."), there's no longer a list of serial ports to traverse, and taking the spinlock became superfluous. To fix the issue, just remove the cpufreq notifier: 1. The notifier doesn't work correctly: all it does is update stored clock rates; it does not update the divider in the hardware. The divider will only be updated when calling sci_set_termios(). I believe this was broken back in 2004, when the old drivers/char/sh-sci.c driver (where the notifier did update the divider) was replaced by drivers/serial/sh-sci.c (where the notifier just updated port->uartclk). Cfr. full-history-linux commits 6f8deaef2e9675d9 ("[PATCH] sh: port sh-sci driver to the new API") and 3f73fe878dc9210a ("[PATCH] Remove old sh-sci driver"). 2. On modern SoCs, the sh-sci parent clock rate is no longer related to the CPU clock rate anyway, so using a cpufreq notifier is futile. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Eryu Guan authored
commit 5e1021f2 upstream. ext4_reserve_inode_write() in ext4_mark_inode_dirty() could fail on error (e.g. EIO) and iloc.bh can be NULL in this case. But the error is ignored in the following "if" condition and ext4_expand_extra_isize() might be called with NULL iloc.bh set, which triggers NULL pointer dereference. This is uncovered by commit 8b4953e1 ("ext4: reserve code points for the project quota feature"), which enlarges the ext4_inode size, and run the following script on new kernel but with old mke2fs: #/bin/bash mnt=/mnt/ext4 devname=ext4-error dev=/dev/mapper/$devname fsimg=/home/fs.img trap cleanup 0 1 2 3 9 15 cleanup() { umount $mnt >/dev/null 2>&1 dmsetup remove $devname losetup -d $backend_dev rm -f $fsimg exit 0 } rm -f $fsimg fallocate -l 1g $fsimg backend_dev=`losetup -f --show $fsimg` devsize=`blockdev --getsz $backend_dev` good_tab="0 $devsize linear $backend_dev 0" error_tab="0 $devsize error $backend_dev 0" dmsetup create $devname --table "$good_tab" mkfs -t ext4 $dev mount -t ext4 -o errors=continue,strictatime $dev $mnt dmsetup load $devname --table "$error_tab" && dmsetup resume $devname echo 3 > /proc/sys/vm/drop_caches ls -l $mnt exit 0 [ Patch changed to simplify the function a tiny bit. -- Ted ] Signed-off-by:
Eryu Guan <guaneryu@gmail.com> Signed-off-by:
-
Karol Herbst authored
commit cfa52c0c upstream. Because Linux might use bigger pages than the 4K pages to handle those mmio ioremaps, the kmmio code shouldn't rely on the pade id as it currently does. Using the memory address instead of the page id lets us look up how big the page is and what its base address is, so that we won't get a page fault within the same page twice anymore. Tested-by:
Pierre Moreau <pierre.morrow@free.fr> Signed-off-by:
Karol Herbst <nouveau@karolherbst.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: linux-mm@kvack.org Cc: linux-x86_64@vger.kernel.org Cc: nouveau@lists.freedesktop.org Cc: pq@iki.fi Cc: rostedt@goodmis.org Link: http://lkml.kernel.org/r/1456966991-6861-1-git-send-email-nouveau@karolherbst.deSigned-off-by:
-
Arnaldo Carvalho de Melo authored
commit a55e5663 upstream. We were dropping the reference we possibly held but not obtaining one for the new maps, which we will drop at perf_evlist__delete(), fix it. This was caught by Steven Noonan in some of the machines which would produce this output when caught by glibc debug mechanisms: $ sudo perf test 21 21: Test object code reading :*** Error in `perf': corrupted double-linked list: 0x00000000023ffcd0 *** ======= Backtrace: ========= /usr/lib/libc.so.6(+0x72055)[0x7f25be0f3055] /usr/lib/libc.so.6(+0x779b6)[0x7f25be0f89b6] /usr/lib/libc.so.6(+0x7a0ed)[0x7f25be0fb0ed] /usr/lib/libc.so.6(__libc_calloc+0xba)[0x7f25be0fceda] perf(parse_events_lex_init_extra+0x38)[0x4cfff8] perf(parse_events+0x55)[0x4a0615] perf(perf_evlist__config+0xcf)[0x4eeb2f] perf[0x479f82] perf(test__code_reading+0x1e)[0x47ad4e] perf(cmd_test+0x5dd)[0x46452d] perf[0x47f4e3] perf(main+0x603)[0x42c723] /usr/lib/libc.so.6(__libc_start_main+0xf0)[0x7f25be0a1610] perf(_start+0x29)[0x42c859] Further investigation using valgrind led to the reference count imbalance fixed in this patch. Reported-and-Tested-by:
Steven Noonan <steven@uplinklabs.net> Report-Link: http://lkml.kernel.org/r/CAKbGBLjC2Dx5vshxyGmQkcD+VwiAQLbHoXA9i7kvRB2-2opHZQ@mail.gmail.com Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Fixes: f30a79b0 ("perf tools: Add reference counting for cpu_map object") Link: http://lkml.kernel.org/n/tip-j0u1bdhr47sa511sgg76kb8h@git.kernel.orgSigned-off-by:
-
Michael Hennerich authored
commit f3df53e4 upstream. Fix RDAC read back errors caused by a typo. Value must shift by 2. Fixes: a4bd3949 ("drivers/misc/ad525x_dpot.c: new features") Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
-
Krzysztof Kozlowski authored
commit fb166ba1 upstream. The regmap_irq_get_virq() can return 0 or -EINVAL in error conditions but driver checked only for value of 0. This could lead to a cast of -EINVAL to an unsigned int used as a interrupt number for devm_request_threaded_irq(). Although this is not yet fatal (devm_request_threaded_irq() will just fail with -EINVAL) but might be a misleading when diagnosing errors. Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
Alexandre Belloni authored
commit aaa3cee5 upstream. The rv8803 has its own driver that should be used. Remove its id from the rx8025 driver. Fixes: b1f9d790Signed-off-by:
-
Dan Carpenter authored
commit 8c09b9fd upstream. We call spin_lock_irqrestore with "flags" set to zero instead of to the value from spin_lock_irqsave(). Fixes: aaaf5fbf ('rtc: add driver for DS1685 family of real time clocks') Signed-off-by:
-
