- 29 May, 2019 31 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 1GbE Intel Wired LAN Driver Updates 2019-05-28 This series contains updates to e1000e, igb and igc. Feng adds additional information on a warning message when a read of a hardware register fails. Gustavo A. R. Silva fixes up two "fall through" code comments so that the checkers can actually determine that we did comment that the case statement is falling through to the next case. Sasha does some cleanup on the igc driver by removing duplicate white space and removed a unneeded workaround for igc. Adds support for flow control to the igc driver. Konstantin Khlebnikov reverts a previous fix which was causing a false positive for a hardware hang. Provides a fix so that when link is lost the packets in the transmit queue are flushed and wakes the transmit queue when the NIC is ready to send packets. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
David S. Miller authored
David Ahern says: ==================== net: API and initial implementation for nexthop objects This set contains the API and initial implementation for nexthops as standalone objects. Patch 1 contains the UAPI and updates to selinux struct. Patch 2 contains the barebones code for nexthop commands, rbtree maintenance and notifications. Patch 3 then adds support for IPv4 gateways along with handling of netdev events. Patch 4 adds support for IPv6 gateways. Patch 5 has the implementation of the encap attributes. Patch 6 adds support for nexthop groups. At the end of this set, nexthop objects can be created and deleted and userspace can monitor nexthop events, but ipv4 and ipv6 routes can not use them yet. Once the nexthop struct is defined, follow on sets add it to fib{6}_info and handle it within the respective code before routes can be inserted using them. ==================== Signed-off-by: -
David Ahern authored
Allow the creation of nexthop groups which reference other nexthop objects to create multipath routes: +--------------+ +------------+ +--------------+ | | nh nh_grp --->| nh_grp_entry |-+ +------------+ +---------|----+ ^ | | +------------+ +----------------+ +--->| nh, weight | nh_parent +------------+ A group entry points to a nexthop with a weight for that hop within the group. The nexthop has a list_head, grp_list, for tracking which groups it is a member of and the group entry has a reference back to the parent. The grp_list is used when a nexthop is deleted - to efficiently remove it from groups using it. If a nexthop group spec is given, no other attributes can be set. Each nexthop id in a group spec must already exist. Similar to single nexthops, the specification of a nexthop group can be updated so that data is managed with rcu locking. Add path selection function to account for multiple paths and add ipv{4,6}_good_nh helpers to know that if a neighbor entry exists it is in a good state. Update NETDEV event handling to rebalance multipath nexthop groups if a nexthop is deleted due to a link event (down or unregister). When a nexthop is removed any groups using it are updated. Groups using a nexthop a tracked via a grp_list. Nexthop dumps can be limited to groups only by adding NHA_GROUPS to the request. Signed-off-by:David Ahern <dsahern@gmail.com> Signed-off-by:
-
David Ahern authored
Add support for NHA_ENCAP and NHA_ENCAP_TYPE. Leverages the existing code for lwtunnel within fib_nh_common, so the only change needed is handling the attributes in the nexthop code. Signed-off-by:
-
David Ahern authored
Handle IPv6 gateway in a nexthop spec. If nh_family is set to AF_INET6, NHA_GATEWAY is expected to be an IPv6 address. Add ipv6 option to gw in nh_config to hold the address, add fib6_nh to nh_info to leverage the ipv6 initialization and cleanup code. Update nh_fill_node to dump the v6 address. Signed-off-by:
-
David Ahern authored
Add support for IPv4 nexthops. If nh_family is set to AF_INET, then NHA_GATEWAY is expected to be an IPv4 address. Register for netdev events to be notified of admin up/down changes as well as deletes. A hash table is used to track nexthop per devices to quickly convert device events to the affected nexthops. Signed-off-by:
-
David Ahern authored
Barebones start point for nexthops. Implementation for RTM commands, notifications, management of rbtree for holding nexthops by id, and kernel side data structures for nexthops and nexthop config. Nexthops are maintained in an rbtree sorted by id. Similar to routes, nexthops are configured per namespace using netns_nexthop struct added to struct net. Nexthop notifications are sent when a nexthop is added or deleted, but NOT if the delete is due to a device event or network namespace teardown (which also involves device events). Applications are expected to use the device down event to flush nexthops and any routes used by the nexthops. Signed-off-by:
-
David Ahern authored
New UAPI for nexthops as standalone objects: - defines netlink ancillary header, struct nhmsg - RTM commands for nexthop objects, RTM_*NEXTHOP, - RTNLGRP for nexthop notifications, RTNLGRP_NEXTHOP, - Attributes for creating nexthops, NHA_* - Attribute for route specs to specify a nexthop by id, RTA_NH_ID. The nexthop attributes and semantics follow the route and RTA ones for device, gateway and lwt encap. Unique to nexthop objects are a blackhole and a group which contains references to other nexthop objects. With the exception of blackhole and group, nexthop objects MUST contain a device. Gateway and encap are optional. Nexthop groups can only reference other pre-existing nexthops by id. If the NHA_ID attribute is present that id is used for the nexthop. If not specified, one is auto assigned. Dump requests can include attributes: - NHA_GROUPS to return only nexthop groups, - NHA_MASTER to limit dumps to nexthops with devices enslaved to the given master (e.g., VRF) - NHA_OIF to limit dumps to nexthops using given device nlmsg_route_perms in selinux code is updated for the new RTM comands. Signed-off-by:
-
David S. Miller authored
Huazhong Tan says: ==================== code optimizations & bugfixes for HNS3 driver This patch-set includes code optimizations and bugfixes for the HNS3 ethernet controller driver. [patch 1/12] fixes a compile warning reported by kbuild test robot. [patch 2/12] fixes HNS3_RXD_GRO_SIZE_M macro definition error. [patch 3/12] adds a debugfs command to dump firmware information. [patch 4/12 - 10/12] adds some code optimizaions and cleanups for reset and driver unloading. [patch 11/12 - 12/12] adds two bugfixes. ==================== Signed-off-by: -
Huazhong Tan authored
When hclge_bind_ring_with_vector() fails, hclge_map_unmap_ring_to_vf_vector() returns the error directly, so nobody will free the memory allocated by hclge_get_ring_chain_from_mbx(). So hclge_free_vector_ring_chain() should be called no matter hclge_bind_ring_with_vector() fails or not. Fixes: 84e095d6 ("net: hns3: Change PF to add ring-vect binding & resetQ to mailbox") Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
-
Huazhong Tan authored
hns3_uninit_phy() should be called before checking HNS3_NIC_STATE_INITED flags, otherwise when this checking fails, there is nobody to call hns3_uninit_phy(). Fixes: c8a8045b ("net: hns3: Fix NULL deref when unloading driver") Signed-off-by:
-
Huazhong Tan authored
When unloading driver, the reset task should not be scheduled anymore. If disable IRQ before cancel ongoing reset task, the IRQ may be re-enabled by the reset task. This patch uses HCLGE_STATE_REMOVING/HCLGEVF_STATE_REMOVING flag to indicate that the driver is unloading, and we should stop new coming reset service to be scheduled, otherwise, reset service will access some resource which has been freed by unloading. Signed-off-by:
-
Huazhong Tan authored
When reset happens, the hardware reset should begin after the driver has finished its preparatory work, otherwise it may cause some hardware error. Before Hardware's reset, it will wait for the driver to write bit HCLGE_NIC_CMQ_ENABLE of register HCLGE_NIC_CSQ_DEPTH_REG to 1, while the driver finishes its preparatory work will do that. BTW, since some cases this register will be cleared, so it needs some sync time before driver's writing. Signed-off-by:
-
Huazhong Tan authored
hclgevf_init_client_instance() is a little bloated and there is some duplicated code. This patch adds some cleanup for it. Signed-off-by:
-
Huazhong Tan authored
hclge_init_client_instance() is a little bloated and there is some duplicated code. This patch adds some cleanup for it. Signed-off-by:
-
Huazhong Tan authored
When VF NIC client's init_instance() succeeds, it means this client has been registered successfully, so we use HCLGEVF_STATE_NIC_REGISTERED to indicate that. And before calling VF NIC client's uninit_instance(), we clear this state. So any operation of VF NIC client from HCLGEVF is not allowed if this state is not set. Signed-off-by:
-
Huazhong Tan authored
When PF ROCE client's init_instance() succeeds, it means this client has been registered successfully, so we use HCLGE_STATE_ROCE_REGISTERED to indicate that. And before calling PF ROCE client's uninit_instance(), we clear this state. So any operation of the ROCE client from HCLGE is not allowed if this state is not set. Signed-off-by:
-
Huazhong Tan authored
When PF NIC client's init_instance() succeeds, it means this client has been registered successfully, so we use HCLGE_STATE_NIC_REGISTERED to indicate that. And before calling PF NIC client's uninit_instance(), we clear this state. So any operation of PF NIC client from HCLGE is not allowed if this state is not set. Signed-off-by:
-
Zhongzhu Liu authored
This patch prints firmware statistics information. debugfs command: echo dump m7 info > cmd estuary:/dbg/hns3/0000:7d:00.0$ echo dump m7 info > cmd [ 172.577240] hns3 0000:7d:00.0: 0x00000000 0x00000000 0x00000000 [ 172.583471] hns3 0000:7d:00.0: 0x00000000 0x00000000 0x00000000 [ 172.589552] hns3 0000:7d:00.0: 0x00000030 0x00000000 0x00000000 [ 172.595632] hns3 0000:7d:00.0: 0x00000000 0x00000000 0x00000000 estuary:/dbg/hns3/0000:7d:00.0$ Signed-off-by:
Zhongzhu Liu <liuzhongzhu@huawei.com> Signed-off-by:
-
Yunsheng Lin authored
According to hardware user menual, the GRO_SIZE is 14 bits width, the HNS3_RXD_GRO_SIZE_M is 10 bits width now, which may cause hardware GRO received packet error problem. Fixes: a6d53b97 ("net: hns3: Adds GRO params to SKB for the stack") Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
-
Jian Shen authored
The ifdef condition of function hclge_add_fd_entry_by_arfs() is unnecessary. It may cause compile warning when CONFIG_RFS_ACCEL is not chosen. This patch fixes it by removing the ifdef condition. Fixes: d93ed94f ("net: hns3: add aRFS support for PF") Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
-
Xue Chaojing authored
in set_rx_mode, __dev_mc_sync and netdev_for_each_mc_addr will repeatedly set the multicast mac address. so we delete this loop. Signed-off-by:
Xue Chaojing <xuechaojing@huawei.com> Signed-off-by:
-
David S. Miller authored
Eric Dumazet says: ==================== inet: frags: followup to 'inet-frags-avoid-possible-races-at-netns-dismantle' Latest patch series ('inet-frags-avoid-possible-races-at-netns-dismantle') brought another syzbot report shown in the third patch changelog. While fixing the issue, I had to call inet_frags_fini() later in IPv6 and ilowpan. Also I believe a completion is needed to ensure proper dismantle at module removal. ==================== Signed-off-by: -
Eric Dumazet authored
As caught by syzbot [1], the rcu grace period that is respected before fqdir_rwork_fn() proceeds and frees fqdir is not enough to prevent inet_frag_destroy_rcu() being run after the freeing. We need a proper rcu_barrier() synchronization to replace the one we had in inet_frags_fini() We also have to fix a potential problem at module removal : inet_frags_fini() needs to make sure that all queued work queues (fqdir_rwork_fn) have completed, otherwise we might call kmem_cache_destroy() too soon and get another use-after-free. [1] BUG: KASAN: use-after-free in inet_frag_destroy_rcu+0xd9/0xe0 net/ipv4/inet_fragment.c:201 Read of size 8 at addr ffff88806ed47a18 by task swapper/1/0 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.2.0-rc1+ #2 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:188 __kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 kasan_report+0x12/0x20 mm/kasan/common.c:614 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:132 inet_frag_destroy_rcu+0xd9/0xe0 net/ipv4/inet_fragment.c:201 __rcu_reclaim kernel/rcu/rcu.h:222 [inline] rcu_do_batch kernel/rcu/tree.c:2092 [inline] invoke_rcu_callbacks kernel/rcu/tree.c:2310 [inline] rcu_core+0xba5/0x1500 kernel/rcu/tree.c:2291 __do_softirq+0x25c/0x94c kernel/softirq.c:293 invoke_softirq kernel/softirq.c:374 [inline] irq_exit+0x180/0x1d0 kernel/softirq.c:414 exiting_irq arch/x86/include/asm/apic.h:536 [inline] smp_apic_timer_interrupt+0x13b/0x550 arch/x86/kernel/apic/apic.c:1068 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:806 </IRQ> RIP: 0010:native_safe_halt+0xe/0x10 arch/x86/include/asm/irqflags.h:61 Code: ff ff 48 89 df e8 f2 95 8c fa eb 82 e9 07 00 00 00 0f 00 2d e4 45 4b 00 f4 c3 66 90 e9 07 00 00 00 0f 00 2d d4 45 4b 00 fb f4 <c3> 90 55 48 89 e5 41 57 41 56 41 55 41 54 53 e8 8e 18 42 fa e8 99 RSP: 0018:ffff8880a98e7d78 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff13 RAX: 1ffffffff1164e11 RBX: ffff8880a98d4340 RCX: 0000000000000000 RDX: dffffc0000000000 RSI: 0000000000000006 RDI: ffff8880a98d4bbc RBP: ffff8880a98e7da8 R08: ffff8880a98d4340 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 R13: ffffffff88b27078 R14: 0000000000000001 R15: 0000000000000000 arch_cpu_idle+0xa/0x10 arch/x86/kernel/process.c:571 default_idle_call+0x36/0x90 kernel/sched/idle.c:94 cpuidle_idle_call kernel/sched/idle.c:154 [inline] do_idle+0x377/0x560 kernel/sched/idle.c:263 cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:354 start_secondary+0x34e/0x4c0 arch/x86/kernel/smpboot.c:267 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243 Allocated by task 8877: save_stack+0x23/0x90 mm/kasan/common.c:71 set_track mm/kasan/common.c:79 [inline] __kasan_kmalloc mm/kasan/common.c:489 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:462 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:503 kmem_cache_alloc_trace+0x151/0x750 mm/slab.c:3555 kmalloc include/linux/slab.h:547 [inline] kzalloc include/linux/slab.h:742 [inline] fqdir_init include/net/inet_frag.h:115 [inline] ipv6_frags_init_net+0x48/0x460 net/ipv6/reassembly.c:513 ops_init+0xb3/0x410 net/core/net_namespace.c:130 setup_net+0x2d3/0x740 net/core/net_namespace.c:316 copy_net_ns+0x1df/0x340 net/core/net_namespace.c:439 create_new_namespaces+0x400/0x7b0 kernel/nsproxy.c:107 unshare_nsproxy_namespaces+0xc2/0x200 kernel/nsproxy.c:206 ksys_unshare+0x440/0x980 kernel/fork.c:2692 __do_sys_unshare kernel/fork.c:2760 [inline] __se_sys_unshare kernel/fork.c:2758 [inline] __x64_sys_unshare+0x31/0x40 kernel/fork.c:2758 do_syscall_64+0xfd/0x680 arch/x86/entry/common.c:301 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 17: save_stack+0x23/0x90 mm/kasan/common.c:71 set_track mm/kasan/common.c:79 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:451 kasan_slab_free+0xe/0x10 mm/kasan/common.c:459 __cache_free mm/slab.c:3432 [inline] kfree+0xcf/0x220 mm/slab.c:3755 fqdir_rwork_fn+0x33/0x40 net/ipv4/inet_fragment.c:154 process_one_work+0x989/0x1790 kernel/workqueue.c:2269 worker_thread+0x98/0xe40 kernel/workqueue.c:2415 kthread+0x354/0x420 kernel/kthread.c:255 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352 The buggy address belongs to the object at ffff88806ed47a00 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 24 bytes inside of 512-byte region [ffff88806ed47a00, ffff88806ed47c00) The buggy address belongs to the page: page:ffffea0001bb51c0 refcount:1 mapcount:0 mapping:ffff8880aa400940 index:0x0 flags: 0x1fffc0000000200(slab) raw: 01fffc0000000200 ffffea000282a788 ffffea0001bb53c8 ffff8880aa400940 raw: 0000000000000000 ffff88806ed47000 0000000100000006 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88806ed47900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88806ed47980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88806ed47a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88806ed47a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88806ed47b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 3c8fc878 ("inet: frags: rework rhashtable dismantle") Signed-off-by:Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Eric Dumazet authored
Both IPv6 and 6lowpan are calling inet_frags_fini() too soon. inet_frags_fini() is dismantling a kmem_cache, that might be needed later when unregister_pernet_subsys() eventually has to remove frags queues from hash tables and free them. This fixes potential use-after-free, and is a prereq for the following patch. Fixes: d4ad4d22 ("inet: frags: use kmem_cache for inet_frag_queue") Signed-off-by:
-
Eric Dumazet authored
fqdir_init() is not fast path and is getting bigger. Signed-off-by:
-
Willem de Bruijn authored
Test the IPv6 flowlabel control and datapath interfaces: Acquire and release the right to use flowlabels with socket option IPV6_FLOWLABEL_MGR. Then configure flowlabels on send and read them on recv with cmsg IPV6_FLOWINFO. Also verify auto-flowlabel if not explicitly set. This helped identify the issue fixed in commit 95c16925 ("ipv6: invert flowlabel sharing check in process and user mode") Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Camelia Groza authored
Add support to configure multiple prioritized TX traffic classes with mqprio. Configure one BD ring per TC for the moment, one netdev queue per TC. Signed-off-by:
Camelia Groza <camelia.groza@nxp.com> Signed-off-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by:
-
David S. Miller authored
Neil Armstrong says: ==================== net: stmmac: dwmac-meson: update with SPDX Licence identifier Update the SPDX Licence identifier for the Amlogic Meson6 and Meson8 dwmac glue drivers. ==================== Signed-off-by: -
Neil Armstrong authored
Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Reviewed-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
-
Neil Armstrong authored
Signed-off-by:
-
- 28 May, 2019 9 commits
-
-
Sasha Neftin authored
The default flow control settings for the i225 device is both 'rx' and 'tx' pause frames. There is no depend on the NVM value. This patch comes to fix this and clean up the driver code. Signed-off-by:
Sasha Neftin <sasha.neftin@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Sasha Neftin authored
This change adds flow control settings. This is required to enable the legacy flow control support. Signed-off-by:
-
Konstantin Khlebnikov authored
Driver does not want to keep packets in Tx queue when link is lost. But present code only reset NIC to flush them, but does not prevent queuing new packets. Moreover reset sequence itself could generate new packets via netconsole and NIC falls into endless reset loop. This patch wakes Tx queue only when NIC is ready to send packets. This is proper fix for problem addressed by commit 0f9e980b ("e1000e: fix cyclic resets at link up with active tx"). Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Suggested-by:
Alexander Duyck <alexander.duyck@gmail.com> Tested-by:
Joseph Yasi <joe.yasi@gmail.com> Tested-by:
Oleksandr Natalenko <oleksandr@redhat.com> Signed-off-by:
-
Konstantin Khlebnikov authored
This reverts commit 0f9e980b. That change cased false-positive warning about hardware hang: e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready e1000e 0000:00:1f.6 eth0: Detected Hardware Unit Hang: TDH <0> TDT <1> next_to_use <1> next_to_clean <0> buffer_info[next_to_clean]: time_stamp <fffba7a7> next_to_watch <0> jiffies <fffbb140> next_to_watch.status <0> MAC Status <40080080> PHY Status <7949> PHY 1000BASE-T Status <0> PHY Extended Status <3000> PCI Status <10> e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx Besides warning everything works fine. Original issue will be fixed property in following patch. Signed-off-by:
-
Sasha Neftin authored
Enables a resend request after the completion timeout workaround is not relevant for i225 device. This patch is clean code relevant this workaround. Minor cosmetic fixes, replace the 'spaces' with 'tabs' Signed-off-by:
-
Sasha Neftin authored
Few function pointers from phy_operations structure were unused. This patch cleans those. Signed-off-by:
-
Sasha Neftin authored
Collision threshold and threshold's shift has been defined twice. This patch comes to fix that. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/net/ethernet/intel/igb/e1000_82575.c: In function ‘igb_get_invariants_82575’: drivers/net/ethernet/intel/igb/e1000_82575.c:636:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (igb_sgmii_uses_mdio_82575(hw)) { ^ drivers/net/ethernet/intel/igb/e1000_82575.c:642:2: note: here case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by:"Gustavo A. R. Silva" <gustavo@embeddedor.com> Tested-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/net/ethernet/intel/igb/igb_main.c: In function ‘__igb_notify_dca’: drivers/net/ethernet/intel/igb/igb_main.c:6694:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (dca_add_requester(dev) == 0) { ^ drivers/net/ethernet/intel/igb/igb_main.c:6701:2: note: here case DCA_PROVIDER_REMOVE: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by:
-
