Different IC has different phy setting of HDMI.
This patch separates the phy hardware relate part for mt8173.
Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

This patch adds dpi dirver suppot for both mt2701 and mt7623.
And also support other (existing or future) chips that use
the same binding and driver.
Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

Convert dpi driver to use drm_of_find_panel_or_bridge.
This changes some error messages to debug messages (in the graph core).
Graph connections are often "no connects" depending on the particular
board, so we want to avoid spurious messages. Plus the kernel is not a
DT validator.
related links:
[1] https://lkml.org/lkml/2017/2/3/716
[2] https://lkml.org/lkml/2017/2/3/719Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

different IC has different clock designed in HDMI, the factor for
calculate clock should be different. Usinng the data in of_node
to find this factor.
Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

The default timing of DPI data and clock is not match.
We could adjust this bit to make them match.
Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

The address of register DPI_H_FRE_CON is different in different IC.
Using of_node data to find this address.
Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

After the kernel 4.4, the DRM disable flow was changed, if DPI was
disableed before CRTC, it will cause warning message as following:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 1339 at ../../linux/linux-4.4.24-mtk/drivers/gpu/drm/drm_irq.c:1326 drm_wait_one_vblank+0x188/0x18c()
vblank wait timed out on crtc 0
Modules linked in: bridge mt8521p_ir_shim(O) i2c_eeprom(O) mtk_m4(O) fuse_ctrl(O) virtual_block(O) caamkeys(PO) chk(PO) amperctl(O) ledctl(O) apple_auth(PO) micctl(O) sensors(PO) lla(O) sdd(PO) ice40_fpga(O) psmon(O) event_queue(PO) utils(O) blackbox(O)
CPU: 0 PID: 1339 Comm: kworker/0:1 Tainted: P        W  O    4.4.24 #1
Hardware name: Mediatek Cortex-A7 (Device Tree)
Workqueue: events drm_mode_rmfb_work_fn
[<c001a710>] (unwind_backtrace) from [<c00151e4>] (show_stack+0x20/0x24)
[<c00151e4>] (show_stack) from [<c027961c>] (dump_stack+0x98/0xac)
[<c027961c>] (dump_stack) from [<c002ac54>] (warn_slowpath_common+0x94/0xc4)
[<c002ac54>] (warn_slowpath_common) from [<c002acc4>] (warn_slowpath_fmt+0x40/0x48)
[<c002acc4>] (warn_slowpath_fmt) from [<c03307ac>] (drm_wait_one_vblank+0x188/0x18c)
[<c03307ac>] (drm_wait_one_vblank) from [<c03307d8>] (drm_crtc_wait_one_vblank+0x28/0x2c)
[<c03307d8>] (drm_crtc_wait_one_vblank) from [<c034f48c>] (mtk_drm_crtc_disable+0x78/0x240)
[<c034f48c>] (mtk_drm_crtc_disable) from [<c03240d4>] (drm_atomic_helper_commit_modeset_disables+0x128/0x3b8)
[<c03240d4>] (drm_atomic_helper_commit_modeset_disables) from [<c0350a7c>] (mtk_atomic_complete+0x74/0xb4)
[<c0350a7c>] (mtk_atomic_complete) from [<c0350b24>] (mtk_atomic_commit+0x68/0x98)
[<c0350b24>] (mtk_atomic_commit) from [<c034ab48>] (drm_atomic_commit+0x54/0x74)
[<c034ab48>] (drm_atomic_commit) from [<c0325c4c>] (drm_atomic_helper_set_config+0x7c/0xa0)
[<c0325c4c>] (drm_atomic_helper_set_config) from [<c0338594>] (drm_mode_set_config_internal+0x68/0xe4)
[<c0338594>] (drm_mode_set_config_internal) from [<c033967c>] (drm_framebuffer_remove+0xe4/0x120)
[<c033967c>] (drm_framebuffer_remove) from [<c0339700>] (drm_mode_rmfb_work_fn+0x48/0x58)
[<c0339700>] (drm_mode_rmfb_work_fn) from [<c0043a38>] (process_one_work+0x154/0x50c)
[<c0043a38>] (process_one_work) from [<c0044074>] (worker_thread+0x284/0x568)
[<c0044074>] (worker_thread) from [<c0049dc4>] (kthread+0xec/0x104)
[<c0049dc4>] (kthread) from [<c0010678>] (ret_from_fork+0x14/0x3c)
---[ end trace 12ae5358e992abd5 ]---

so, we add refcount for DPI power on/off to protect the flow.
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
Signed-off-by: CK Hu <ck.hu@mediatek.com>

More new features and fixes for 4.20:
- Add dynamic powergating support for VCN on picasso
- Scheduler cleanup
- Vega20 support for KFD
- DC cleanups and bug fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180927184348.2696-1-alexander.deucher@amd.com

drm/tegra: Changes for v4.20-rc1

This contains initial Tegra194 support as well as a couple of fixes for
DMA/IOMMU integration.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180927205051.30017-1-thierry.reding@gmail.com

Driver Changes:

- Bugzilla 107600: Fix stuttering video playback on MythTV on old hardware (Chris)
- Avoid black screen when using CSC coefficient matrix (Raviraj)
- Hammer PDs on Baytrail to make sure they reload (Chris)
- Capture some objects if unable to capture all, on error (Chris)
- Add W/A for 16 GB DIMMs on SKL+ (Mahesh)
- Only enable IPC for symmetric memory configurations on KBL+ (Mahesh)
- Assume pipe A to have maximum stride limits (Ville)
- Always update update OA contexts via context image (Tvrtko)
- Icelake enabling patches (Madhav, Dhinakaran)
- Add Icelake DMC firmware (Anusha)
- Fixes for CI found corner cases (Chris)
- Limit the backpressure for request allocation (Chris)
- Park GPU on module load so usage starts from known state (Chris)
- Flush tasklet when checking for idle (Chris)
- Use coherent write into the context image on BSW+ (Chris)
- Fix possible integer overflow for framebuffers that get aligned past 4GiB (Ville)
- Downgrade fence timeout from warn to notice and add debug hint (Chris)

- Fixes to multi function encoder code (Ville)
- Fix sprite plane check logic (Dan, Ville)
- PAGE_SIZE vs. I915_GTT_PAGE_SIZE fixes (Ville)
- Decode memory bandwidth and parameters for BXT and SKL+ (Mahesh)
- Overwrite BIOS set IPC value from KMS (Mahesh)
- Multiple pipe handling code cleanups/restructurings/optimizations (Ville)
- Spare low 4G address for non-48bit objects (Chris)
- Free context_setparam of struct_mutex (Chris)
- Delay updating ring register state on resume (Chris)
- Avoid unnecessarily copying overlay IOCTL parameters (Chris)
- Update GuC power domain states even without submission (Michal)
- Restore GuC preempt-context across S3/S4 (Chris)
- Add kernel selftest for rapid context switching (Chris)
- Keep runtime power management ref for live selftests (Chris)
- GEM code cleanups (Matt)
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180927095933.GA11458@jlahtine-desk.ger.corp.intel.com

drm-misc-next for 4.20:

UAPI Changes:
- None

Cross-subsystem Changes:
- MAINTAINERS: Move udl, mxsfb, and fsl-dcu into drm-misc (Stefan, Sean)

Core Changes:
- syncobj: Check condition before returning timeout in schedule() (Chris)

Driver Changes:
- various: First wave of drm_fbdev_generic_setup() conversions (Noralf)
- bochs/virtio: More format byte-order improvements (Gerd)
- mxsfb: A couple fixes + add runtime pm support (Leonard)
- virtio: Add vmap support for prime objects (Ezequiel)

Cc: Stefan Agner <stefan@agner.ch>
Cc: Sean Paul <sean@poorly.run>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Gerd Hoffman <kraxel@redhat.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20180927093950.GA180365@art_vandelay

having a delayed work item per job is redundant as we only need one
per scheduler to track the time out the currently executing job.

v2: the first element of the ring mirror list is the currently
executing job so we don't need a additional variable for it

v3: squash in fixes for v3d and etnaviv
Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Clang generates warnings when one enumerated type is implicitly
converted to another.

drivers/gpu/drm/amd/amdgpu/../powerplay/hwmgr/ppatomfwctrl.c:532:57:
warning: implicit conversion from enumeration type 'enum
atom_smu11_syspll0_clock_id' to different enumeration type 'BIOS_CLKID'
      (aka 'enum atom_smu9_syspll0_clock_id') [-Wenum-conversion]
        if (!pp_atomfwctrl_get_clk_information_by_clkid(hwmgr,
SMU11_SYSPLL0_SOCCLK_ID, &frequency))

In this case, that is expected behavior. To make that clear to Clang
without explicitly casting these values, change id's type to uint8_t
in pp_atomfwctrl_get_clk_information_by_clkid so no conversion happens.
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Firmware have the workaround to replace the atomic Ops with read-modify-write on CP side.
User should not expect atomic Ops on system memory works normally if system didn't not
support it.
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-By: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

R40 DE2 mixers are similar to those found in A83T, except it needs
different clock settings.

Add a compatibles for them.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-14-jernej.skrabec@siol.net

This reverts commit 3510e7a7.

During the 4.19 merge window for drm-misc, two patches critical to
supporting the display pipeline on the Allwinner R40 SoC were missed.
They were applied later but missed the merge window deadline. As a
result 4.19-rc1 kernel would crash on the R40 when it couldn't parse
the new device tree structure. We ended up removing support for the
R40 display pipeline for 4.19.

Since the missing patches are already merged for 4.20, we can now
revert the commit that removed support.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180921142743.8711-1-wens@csie.org

Backmerging 4.19-rc5 to pick up sun4i fix
Signed-off-by: Sean Paul <seanpaul@chromium.org>

Fix some indentation issues.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

expects argument of type ‘unsigned int’ has type ‘long int’

Fixes: 52e211c1 ("drm/amdgpu:Add error message when register failed to reach expected value")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add flag AMD_PG_SUPPORT_DPG to enable DPG mode on Picasso
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add functions to support VCN DPG pause mode.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add DPG pause state to support VCN DPG mode.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add DPG mode start/stop/mc_resume/clock_gating to
support vcn 1.0 DPG mode.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Some registers read/write needs program through SDRAM pool under
DPG mode.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add DPG support flag for VCN DPG mode.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

New register offset/mask need to be added to support VCN DPG mode.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Use register UVD_SCRATCH9 for VCN ring/ib test. Since those registers
can't be directly accessed under DPG(Dynamic Power Gate) mode.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Everything that isn't related to the IH ring.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add a callback to amdgpu_ih_process to remove most of the IV logic.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Only print the warning if there was actually some fence processed
from the SW fallback timer.

v2: Add return value to amdgpu_fence_process to let
amdgpu_fence_fallback know fences were actually
processed and then print the warning.

v3: Always return true if seq != last_seq
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Cleanup amdgpu_ih.c to be able to handle multiple interrupt rings.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We always want those to be setup correctly.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

That is superflous here.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

While the apg_end address is 0xffffffff, if add 1 with it, the value will be
overflow and roll back to 0. So when 0 is written to
mmMC_VM_SYSTEM_APERTURE_HIGH_ADDR, the system aperture is actually disabled. And
so any access to vram will trigger a page fault.

Raven2's HW issue only need increase the vram end address, and needn't do it on
the agp.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Need to disable dpm features before halt rlc.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

the CG related registers have been programed in golden setting
PG register default value is 0.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hang Zhou <hang.zhou@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

before halt rlc/cp, need to
1. enter rlc safe mode
2. wait rlc/cp idle
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hang Zhou <hang.zhou@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

change function name gfx_v6/7/8/9_0_gpu_init to
gfx_v6/7/8/9_0_constants_init.
this function is just for init gfx constants such
as max pipes, render backends...
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Deactivate SW interrupt fallback when all emited fences are completed.
Also switch interrupt SW fallback message from INFO to WARN.

v2: shorten the warning message a bit and only re-activate the timer during
processing if it was already activated before. (Christian)
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Suggested-by: Christian Konig <Christian.Koenig@amd.com>
Reviewed-and-Tested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add Vega20 device IDs, device info and enable it in KFD.
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>