- 18 Apr, 2018 1 commit
-
-
Jon Maloy authored
When we delete a service item in tipc_nametbl_stop() we loop over all service ranges in the service's RB tree, and for each service range we loop over its pertaining publications while calling tipc_service_remove_publ() for each of them. However, tipc_service_remove_publ() has the side effect that it also removes the comprising service range item when there are no publications left. This leads to a "use-after-free" access when the inner loop continues to the next iteration, since the range item holding the list we are looping no longer exists. We fix this by moving the delete of the service range item outside the said function. Instead, we now let the two functions calling it test if the list is empty and perform the removal when that is the case. Reported-by: syzbot+d64b64afc55660106556@syzkaller.appspotmail.com Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 17 Apr, 2018 5 commits
-
-
Eric Biggers authored
Adding a dns_resolver key whose payload contains a very long option name resulted in that string being printed in full. This hit the WARN_ONCE() in set_precision() during the printk(), because printk() only supports a precision of up to 32767 bytes: precision 1000000 too large WARNING: CPU: 0 PID: 752 at lib/vsprintf.c:2189 vsnprintf+0x4bc/0x5b0 Fix it by limiting option strings (combined name + value) to a much more reasonable 128 bytes. The exact limit is arbitrary, but currently the only recognized option is formatted as "dnserror=%lu" which fits well within this limit. Also ratelimit the printks. Reproducer: perl -e 'print "#", "A" x 1000000, "\x00"' | keyctl padd dns_resolver desc @s This bug was found using syzkaller. Reported-by:Mark Rutland <mark.rutland@arm.com> Fixes: 4a2d7892 ("DNS: If the DNS server returns an error, allow that to be cached [ver #2]") Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Bert Kenward authored
For some firmware variants - specifically 'capture packed stream' - RSS filters are not valid. We must check if RSS is actually active rather than merely enabled. Fixes: 42356d9a ("sfc: support RSS spreading of ethtool ntuple filters") Signed-off-by:
Bert Kenward <bkenward@solarflare.com> Signed-off-by:
-
Toshiaki Makita authored
Syzkaller spotted an old bug which leads to reading skb beyond tail by 4 bytes on vlan tagged packets. This is caused because skb_vlan_tagged_multi() did not check skb_headlen. BUG: KMSAN: uninit-value in eth_type_vlan include/linux/if_vlan.h:283 [inline] BUG: KMSAN: uninit-value in skb_vlan_tagged_multi include/linux/if_vlan.h:656 [inline] BUG: KMSAN: uninit-value in vlan_features_check include/linux/if_vlan.h:672 [inline] BUG: KMSAN: uninit-value in dflt_features_check net/core/dev.c:2949 [inline] BUG: KMSAN: uninit-value in netif_skb_features+0xd1b/0xdc0 net/core/dev.c:3009 CPU: 1 PID: 3582 Comm: syzkaller435149 Not tainted 4.16.0+ #82 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676 eth_type_vlan include/linux/if_vlan.h:283 [inline] skb_vlan_tagged_multi include/linux/if_vlan.h:656 [inline] vlan_features_check include/linux/if_vlan.h:672 [inline] dflt_features_check net/core/dev.c:2949 [inline] netif_skb_features+0xd1b/0xdc0 net/core/dev.c:3009 validate_xmit_skb+0x89/0x1320 net/core/dev.c:3084 __dev_queue_xmit+0x1cb2/0x2b60 net/core/dev.c:3549 dev_queue_xmit+0x4b/0x60 net/core/dev.c:3590 packet_snd net/packet/af_packet.c:2944 [inline] packet_sendmsg+0x7c57/0x8a10 net/packet/af_packet.c:2969 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] sock_write_iter+0x3b9/0x470 net/socket.c:909 do_iter_readv_writev+0x7bb/0x970 include/linux/fs.h:1776 do_iter_write+0x30d/0xd40 fs/read_write.c:932 vfs_writev fs/read_write.c:977 [inline] do_writev+0x3c9/0x830 fs/read_write.c:1012 SYSC_writev+0x9b/0xb0 fs/read_write.c:1085 SyS_writev+0x56/0x80 fs/read_write.c:1082 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x43ffa9 RSP: 002b:00007fff2cff3948 EFLAGS: 00000217 ORIG_RAX: 0000000000000014 RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 000000000043ffa9 RDX: 0000000000000001 RSI: 0000000020000080 RDI: 0000000000000003 RBP: 00000000006cb018 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000217 R12: 00000000004018d0 R13: 0000000000401960 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314 kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321 slab_post_alloc_hook mm/slab.h:445 [inline] slab_alloc_node mm/slub.c:2737 [inline] __kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369 __kmalloc_reserve net/core/skbuff.c:138 [inline] __alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206 alloc_skb include/linux/skbuff.h:984 [inline] alloc_skb_with_frags+0x1d4/0xb20 net/core/skbuff.c:5234 sock_alloc_send_pskb+0xb56/0x1190 net/core/sock.c:2085 packet_alloc_skb net/packet/af_packet.c:2803 [inline] packet_snd net/packet/af_packet.c:2894 [inline] packet_sendmsg+0x6444/0x8a10 net/packet/af_packet.c:2969 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] sock_write_iter+0x3b9/0x470 net/socket.c:909 do_iter_readv_writev+0x7bb/0x970 include/linux/fs.h:1776 do_iter_write+0x30d/0xd40 fs/read_write.c:932 vfs_writev fs/read_write.c:977 [inline] do_writev+0x3c9/0x830 fs/read_write.c:1012 SYSC_writev+0x9b/0xb0 fs/read_write.c:1085 SyS_writev+0x56/0x80 fs/read_write.c:1082 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Fixes: 58e998c6 ("offloading: Force software GSO for multiple vlan tags.") Reported-and-tested-by: syzbot+0bbe42c764feafa82c5a@syzkaller.appspotmail.com Signed-off-by:
Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by:
-
Nicolas Dechesne authored
To ensure that qrtr can be loaded automatically, when needed, if it is compiled as module. Signed-off-by:
Nicolas Dechesne <nicolas.dechesne@linaro.org> Signed-off-by:
-
Stefan Hajnoczi authored
Commit c1eef220 ("vsock: always call vsock_init_tables()") introduced a module_init() function without a corresponding module_exit() function. Modules with an init function can only be removed if they also have an exit function. Therefore the vsock module was considered "permanent" and could not be removed. This patch adds an empty module_exit() function so that "rmmod vsock" works. No explicit cleanup is required because: 1. Transports call vsock_core_exit() upon exit and cannot be removed while sockets are still alive. 2. vsock_diag.ko does not perform any action that requires cleanup by vsock.ko. Fixes: c1eef220 ("vsock: always call vsock_init_tables()") Reported-by:
Xiumei Mu <xmu@redhat.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jorgen Hansen <jhansen@vmware.com> Signed-off-by:
Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by:
Jorgen Hansen <jhansen@vmware.com> Signed-off-by:
-
- 16 Apr, 2018 12 commits
-
-
Randy Dunlap authored
Make lib/textsearch.c usable as kernel-doc. Add textsearch() function family to kernel-api documentation. Fix kernel-doc warnings in <linux/textsearch.h>: ../include/linux/textsearch.h:65: warning: Incorrect use of kernel-doc format: * get_next_block - fetch next block of data ../include/linux/textsearch.h:82: warning: Incorrect use of kernel-doc format: * finish - finalize/clean a series of get_next_block() calls Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
David S. Miller authored
Eric Dumazet says: ==================== tipc: Better check user provided attributes syzbot reported a crash in __tipc_nl_net_set() While fixing it, I also had to fix an old bug involving TIPC_NLA_NET_ADDR ==================== Acked-by:
-
Eric Dumazet authored
syzbot reported a crash in __tipc_nl_net_set() caused by NULL dereference. We need to check that both TIPC_NLA_NET_NODEID and TIPC_NLA_NET_NODEID_W1 are present. We also need to make sure userland provided u64 attributes. Fixes: d50ccc2d ("tipc: add 128-bit node identifier") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Ying Xue <ying.xue@windriver.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Eric Dumazet authored
Before syzbot/KMSAN bites, add the missing policy for TIPC_NLA_NET_ADDR Fixes: 27c21416 ("tipc: add net set to new netlink api") Signed-off-by:
-
Gao Feng authored
It would allocate memory in this function when the cork->opt is NULL. But the memory isn't freed if failed in the latter rt check, and return error directly. It causes the memleak if its caller is ip_make_skb which also doesn't free the cork->opt when meet a error. Now move the rt check ahead to avoid the memleak. Signed-off-by:
Gao Feng <gfree.wind@vip.163.com> Signed-off-by:
-
Eric Dumazet authored
In order to remove the race caught by syzbot [1], we need to lock the socket before using po->tp_version as this could change under us otherwise. This means lock_sock() and release_sock() must be done by packet_set_ring() callers. [1] : BUG: KMSAN: uninit-value in packet_set_ring+0x1254/0x3870 net/packet/af_packet.c:4249 CPU: 0 PID: 20195 Comm: syzkaller707632 Not tainted 4.16.0+ #83 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676 packet_set_ring+0x1254/0x3870 net/packet/af_packet.c:4249 packet_setsockopt+0x12c6/0x5a90 net/packet/af_packet.c:3662 SYSC_setsockopt+0x4b8/0x570 net/socket.c:1849 SyS_setsockopt+0x76/0xa0 net/socket.c:1828 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x449099 RSP: 002b:00007f42b5307ce8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 000000000070003c RCX: 0000000000449099 RDX: 0000000000000005 RSI: 0000000000000107 RDI: 0000000000000003 RBP: 0000000000700038 R08: 000000000000001c R09: 0000000000000000 R10: 00000000200000c0 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000080eecf R14: 00007f42b53089c0 R15: 0000000000000001 Local variable description: ----req_u@packet_setsockopt Variable was created at: packet_setsockopt+0x13f/0x5a90 net/packet/af_packet.c:3612 SYSC_setsockopt+0x4b8/0x570 net/socket.c:1849 Fixes: f6fb8f10 ("af-packet: TPACKET_V3 flexible buffer implementation.") Signed-off-by:
-
Thomas Falcon authored
Due to a firmware bug, the hypervisor can send an interrupt to a transmit or receive queue just prior to a partition migration, not allowing the device enough time to handle it and send an EOI. When the partition migrates, the interrupt is lost but an "EOI-pending" flag for the interrupt line is still set in firmware. No further interrupts will be sent until that flag is cleared, effectively freezing that queue. To workaround this, the driver will disable the hardware interrupt and send an H_EOI signal prior to re-enabling it. This will flush the pending EOI and allow the driver to continue operation. Signed-off-by:
Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by:
-
Soheil Hassas Yeganeh authored
Clear tp->packets_out when purging the write queue, otherwise tcp_rearm_rto() mistakenly assumes TCP write queue is not empty. This results in NULL pointer dereference. Also, remove the redundant `tp->packets_out = 0` from tcp_disconnect(), since tcp_disconnect() calls tcp_write_queue_purge(). Fixes: a27fd7a8 (tcp: purge write queue upon RST) Reported-by:
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Reported-by:
Sami Farin <hvtaifwkbgefbaei@gmail.com> Tested-by:
Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Paolo Abeni authored
When parsing the options provided by the user space, team_nl_cmd_options_set() insert them in a temporary list to send multiple events with a single message. While each option's attribute is correctly validated, the code does not check for duplicate entries before inserting into the event list. Exploiting the above, the syzbot was able to trigger the following splat: kernel BUG at lib/list_debug.c:31! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 4466 Comm: syzkaller556835 Not tainted 4.16.0+ #17 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__list_add_valid+0xaa/0xb0 lib/list_debug.c:29 RSP: 0018:ffff8801b04bf248 EFLAGS: 00010286 RAX: 0000000000000058 RBX: ffff8801c8fc7a90 RCX: 0000000000000000 RDX: 0000000000000058 RSI: ffffffff815fbf41 RDI: ffffed0036097e3f RBP: ffff8801b04bf260 R08: ffff8801b0b2a700 R09: ffffed003b604f90 R10: ffffed003b604f90 R11: ffff8801db027c87 R12: ffff8801c8fc7a90 R13: ffff8801c8fc7a90 R14: dffffc0000000000 R15: 0000000000000000 FS: 0000000000b98880(0000) GS:ffff8801db000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000043fc30 CR3: 00000001afe8e000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __list_add include/linux/list.h:60 [inline] list_add include/linux/list.h:79 [inline] team_nl_cmd_options_set+0x9ff/0x12b0 drivers/net/team/team.c:2571 genl_family_rcv_msg+0x889/0x1120 net/netlink/genetlink.c:599 genl_rcv_msg+0xc6/0x170 net/netlink/genetlink.c:624 netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2448 genl_rcv+0x28/0x40 net/netlink/genetlink.c:635 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0x58b/0x740 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x9f0/0xfa0 net/netlink/af_netlink.c:1901 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:639 ___sys_sendmsg+0x805/0x940 net/socket.c:2117 __sys_sendmsg+0x115/0x270 net/socket.c:2155 SYSC_sendmsg net/socket.c:2164 [inline] SyS_sendmsg+0x29/0x30 net/socket.c:2162 do_syscall_64+0x29e/0x9d0 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x4458b9 RSP: 002b:00007ffd1d4a7278 EFLAGS: 00000213 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000000000000001b RCX: 00000000004458b9 RDX: 0000000000000010 RSI: 0000000020000d00 RDI: 0000000000000004 RBP: 00000000004a74ed R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000213 R12: 00007ffd1d4a7348 R13: 0000000000402a60 R14: 0000000000000000 R15: 0000000000000000 Code: 75 e8 eb a9 48 89 f7 48 89 75 e8 e8 d1 85 7b fe 48 8b 75 e8 eb bb 48 89 f2 48 89 d9 4c 89 e6 48 c7 c7 a0 84 d8 87 e8 ea 67 28 fe <0f> 0b 0f 1f 40 00 48 b8 00 00 00 00 00 fc ff df 55 48 89 e5 41 RIP: __list_add_valid+0xaa/0xb0 lib/list_debug.c:29 RSP: ffff8801b04bf248 This changeset addresses the avoiding list_add() if the current option is already present in the event list. Reported-and-tested-by: syzbot+4d4af685432dc0e56c91@syzkaller.appspotmail.com Signed-off-by:Paolo Abeni <pabeni@redhat.com> Fixes: 2fcdb2c9 ("team: allow to send multiple set events in one message") Signed-off-by:
-
Maxime Chevallier authored
Marvell's PPv2 controller has a Packet Header parser, which uses a fixed-size TCAM array of filter entries. The mvpp2 driver reserves some ranges among the 256 TCAM entries to perform MAC and VID filtering. The rest of the TCAM ids are freely usable for other features, such as IPv4 proto matching. This commit fixes the MVPP2_PE_LAST_FREE_TID define that sets the end of the "free range", which included the MAC range. This could therefore allow some other features to use entries dedicated to MAC filtering, lowering the number of unicast/multicast addresses that could be allowed before switching to promiscuous mode. Fixes: 10fea26c ("net: mvpp2: Add support for unicast filtering") Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
-
Dan Carpenter authored
This patch is just wrong, sorry. I was trying to fix a static checker warning and misread the code. The reference taken in macsec_newlink() is released in macsec_free_netdev() when the netdevice is destroyed. This reverts commit 5dcd8400. Reported-by:
Laura Abbott <labbott@redhat.com> Fixes: 5dcd8400 ("macsec: missing dev_put() on error in macsec_newlink()") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Wang Sheng-Hui authored
The tools are located at tootls/bpf/ instead of tools/net/. Update the filter.txt doc. Signed-off-by:
Wang Sheng-Hui <shhuiw@foxmail.com> Signed-off-by:
-
- 14 Apr, 2018 4 commits
-
-
David S. Miller authored
Edward Cree says: ==================== sfc: ARFS fixes Three issues introduced by my recent asynchronous filter handling changes: 1. The old filter_rfs_insert would replace a matching filter of equal priority; we need to pass the appropriate argument to filter_insert to make it do the same. 2. We're lying to the kernel with our return value from ndo_rx_flow_steer, so we need to lie consistently when calling rps_may_expire_flow. This is only a partial fix, as the lie still prevents us from steering multiple flows with the same ID to different queues; a proper fix that stops us lying at all will hopefully follow later. 3. It's possible to cause the kernel to hammer ndo_rx_flow_steer very hard, so make sure we don't build up too huge a backlog of workitems. Possibly it would be better to fix #3 on the kernel side; I have a patch which I think does that but it's not a regression in 4.17 so isn't 'net' material. There's also the issue that we come up in the bad configuration that triggers #3 by default, but that too is a problem for another time. ==================== Signed-off-by: -
Edward Cree authored
A misconfigured system (e.g. with all interrupts affinitised to all CPUs) may produce a storm of ARFS steering events. With the existing sfc ARFS implementation, that could create a backlog of workitems that grinds the system to a halt. To prevent this, limit the number of workitems that may be in flight for a given SFC device to 8 (EFX_RPS_MAX_IN_FLIGHT), and return EBUSY from our ndo_rx_flow_steer method if the limit is reached. Given this limit, also store the workitems in an array of slots within the struct efx_nic, rather than dynamically allocating for each request. The limit should not negatively impact performance, because it is only likely to be hit in cases where ARFS will be ineffective anyway. Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
Edward Cree authored
When we inserted an ARFS filter for ndo_rx_flow_steer(), we didn't know what the filter ID would be, so we just returned 0. Thus, we must also pass 0 as the filter ID when calling rps_may_expire_flow() for it, and rely on the flow_id to identify what we're talking about. Fixes: 3af0f342 ("sfc: replace asynchronous filter operations") Signed-off-by:
-
Edward Cree authored
Necessary to allow redirecting a flow when the application moves. Fixes: 3af0f342 ("sfc: replace asynchronous filter operations") Signed-off-by:
-
- 13 Apr, 2018 18 commits
-
-
David S. Miller authored
Guillaume Nault says: ==================== l2tp: remove unsafe calls to l2tp_tunnel_find_nth() Using l2tp_tunnel_find_nth() is racy, because the returned tunnel can go away as soon as this function returns. This series introduce l2tp_tunnel_get_nth() as a safe replacement to fixes these races. With this series, all unsafe tunnel/session lookups are finally gone. ==================== Acked-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Guillaume Nault authored
Use l2tp_tunnel_get_nth() instead of l2tp_tunnel_find_nth(), to be safe against concurrent tunnel deletion. Use the same mechanism as in l2tp_ppp.c for dropping the reference taken by l2tp_tunnel_get_nth(). That is, drop the reference just before looking up the next tunnel. In case of error, drop the last accessed tunnel in l2tp_dfs_seq_stop(). That was the last use of l2tp_tunnel_find_nth(). Fixes: 0ad66140 ("l2tp: Add debugfs files for dumping l2tp debug info") Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Guillaume Nault authored
Use l2tp_tunnel_get_nth() instead of l2tp_tunnel_find_nth(), to be safe against concurrent tunnel deletion. Unlike sessions, we can't drop the reference held on tunnels in pppol2tp_seq_show(). Tunnels are reused across several calls to pppol2tp_seq_start() when iterating over sessions. These iterations need the tunnel for accessing the next session. Therefore the only safe moment for dropping the reference is just before searching for the next tunnel. Normally, the last invocation of pppol2tp_next_tunnel() doesn't find any new tunnel, so it drops the last tunnel without taking any new reference. However, in case of error, pppol2tp_seq_stop() is called directly, so we have to drop the reference there. Fixes: fd558d18 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by:
-
Guillaume Nault authored
l2tp_tunnel_find_nth() is unsafe: no reference is held on the returned tunnel, therefore it can be freed whenever the caller uses it. This patch defines l2tp_tunnel_get_nth() which works similarly, but also takes a reference on the returned tunnel. The caller then has to drop it after it stops using the tunnel. Convert netlink dumps to make them safe against concurrent tunnel deletion. Fixes: 309795f4 ("l2tp: Add netlink control API for L2TP") Signed-off-by:
-
Jason Wang authored
We tends to batch submitting packets during XDP_TX. This requires to kick virtqueue after a batch, we tried to do it through xdp_do_flush_map() which only makes sense for devmap not XDP_TX. So explicitly kick the virtqueue in this case. Reported-by:
Kimitoshi Takahashi <ktaka@nii.ac.jp> Tested-by:
-
Richard Cochran authored
The DSA stack passes received PTP frames to this driver via mv88e6xxx_port_rxtstamp() for deferred delivery. The driver then queues the frame and kicks the worker thread. The work callback reads out the latched receive time stamp and then works through the queue, delivering any non-matching frames without a time stamp. If a new frame arrives after the worker thread has read out the time stamp register but enters the queue before the worker finishes processing the queue, that frame will be delivered without a time stamp. This patch fixes the race by moving the queue onto a list on the stack before reading out the latched time stamp value. Fixes: c6fe0ad2 ("net: dsa: mv88e6xxx: add rx/tx timestamping support") Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Wolfgang Bumiller authored
When coming from ndisc_netdev_event() in net/ipv6/ndisc.c, neigh_ifdown() is called with &nd_tbl, locking this while clearing the proxy neighbor entries when eg. deleting an interface. Calling the table's pndisc_destructor() with the lock still held, however, can cause a deadlock: When a multicast listener is available an IGMP packet of type ICMPV6_MGM_REDUCTION may be sent out. When reaching ip6_finish_output2(), if no neighbor entry for the target address is found, __neigh_create() is called with &nd_tbl, which it'll want to lock. Move the elements into their own list, then unlock the table and perform the destruction. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199289 Fixes: 6fd6ce20 ("ipv6: Do not depend on rt->n in ip6_finish_output2().") Signed-off-by:
Wolfgang Bumiller <w.bumiller@proxmox.com> Signed-off-by:
-
Xin Long authored
pf->cmp_addr() is called before binding a v6 address to the sock. It should not check ports, like in sctp_inet_cmp_addr. But sctp_inet6_cmp_addr checks the addr by invoking af(6)->cmp_addr, sctp_v6_cmp_addr where it also compares the ports. This would cause that setsockopt(SCTP_SOCKOPT_BINDX_ADD) could bind multiple duplicated IPv6 addresses after Commit 40b4f0fd ("sctp: lack the check for ports in sctp_v6_cmp_addr"). This patch is to remove af->cmp_addr called in sctp_inet6_cmp_addr, but do the proper check for both v6 addrs and v4mapped addrs. v1->v2: - define __sctp_v6_cmp_addr to do the common address comparison used for both pf and af v6 cmp_addr. Fixes: 40b4f0fd ("sctp: lack the check for ports in sctp_v6_cmp_addr") Reported-by:
Jianwen Ji <jiji@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
David S. Miller authored
Merge branch 'nfp-improve-signal-handing-on-FW-waits-and-flower-control-message-Jakub Kicinski says: ==================== nfp: improve signal handing on FW waits and flower control message processing The first part of this set aims to improve handling of interrupted waits. Patch 1 makes waiting for management FW responses uninterruptible while patch 2 adds a message when signal arrives while waiting for an NFP mutex. We can't interrupt execution of FW commands so uninterruptible sleep seems reasonable there. Exiting a wait for a mutex should be clean and have no side affects so we are allowing to abort it. Note that both waits have rather large timeouts (tens of seconds). Patches 3 and 4 improve flower offload operation under heavy load. Currently there is no cap on the number of queued FW notifications. Some of the notifications have to be processed from a workqueue which may lead to very large number of messages getting queued if workqueue never gets a chance to run. Pieter puts a limit on number of queued messages, tries to drop some messages we ignore without queuing and process more important messages first. ==================== Signed-off-by: -
Pieter Jansen van Vuuren authored
Introduce a second skb list for handling control messages and limit the number of allowed messages. Some control messages are considered more crucial than others, resulting in the need for a second skb list. By splitting the list into a separate high and low priority list we can ensure that messages on the high list get added to the head of the list that gets processed, this however has no functional impact. Previously there was no limit on the number of messages allowed on the queue, this could result in the queue growing boundlessly and eventually the host running out of memory. Fixes: b985f870 ("nfp: process control messages in workqueue in flower app") Signed-off-by:
Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
-
Pieter Jansen van Vuuren authored
Previously we processed the route ack control messages in the workqueue, this unnecessarily loads the workqueue. We can deal with these messages sooner as we know we are going to drop them. Fixes: 8e6a9046 ("nfp: flower vxlan neighbour offload") Signed-off-by:
-
Jakub Kicinski authored
When waiting for an NFP mutex is interrupted print a message to make root causing later error messages easier. Signed-off-by:
Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by:
-
Jakub Kicinski authored
We currently allow signals to interrupt the wait for management FW commands. Exiting the wait should not cause trouble, the FW will just finish executing the command in the background and new commands will wait for the old one to finish. However, this may not be what users expect (Ctrl-C not actually stopping the command). Moreover some systems routinely request link information with signals pending (Ubuntu 14.04 runs a landscape-sysinfo python tool from MOTD) worrying users with errors like these: nfp 0000:04:00.0: nfp_nsp: Error -512 waiting for code 0x0007 to start nfp 0000:04:00.0: nfp: reading port table failed -512 Make the wait for management FW responses non-interruptible. Fixes: 1a64821c ("nfp: add support for service processor access") Signed-off-by:
-
Jon Maloy authored
The stack variable 'dnode' in __tipc_sendmsg() may theoretically end up tipc_node_get_mtu() as an unitilalized variable. We fix this by intializing the variable at declaration. We also add a default else clause to the two conditional ones already there, so that we never end up in the named function if the given address type is illegal. Reported-by: syzbot+b0975ce9355b347c1546@syzkaller.appspotmail.com Signed-off-by:
-
Doron Roberts-Kedes authored
strp_data_ready resets strp->need_bytes to 0 if strp_peek_len indicates that the remainder of the message has been received. However, do_strp_work does not reset strp->need_bytes to 0. If do_strp_work completes a partial message, the value of strp->need_bytes will continue to reflect the needed bytes of the previous message, causing future invocations of strp_data_ready to return early if strp->need_bytes is less than strp_peek_len. Resetting strp->need_bytes to 0 in __strp_recv on handing a full message to the upper layer solves this problem. __strp_recv also calculates strp->need_bytes using stm->accum_len before stm->accum_len has been incremented by cand_len. This can cause strp->need_bytes to be equal to the full length of the message instead of the full length minus the accumulated length. This, in turn, causes strp_data_ready to return early, even when there is sufficient data to complete the partial message. Incrementing stm->accum_len before using it to calculate strp->need_bytes solves this problem. Found while testing net/tls_sw recv path. Fixes: 43a0c675 ("strparser: Stream parser for messages") Signed-off-by:
Doron Roberts-Kedes <doronrk@fb.com> Signed-off-by:
-
Anders Roxell authored
Script in_netns.sh isn't installed. -------------------- running psock_fanout test -------------------- ./run_afpackettests: line 12: ./in_netns.sh: No such file or directory [FAIL] -------------------- running psock_tpacket test -------------------- ./run_afpackettests: line 22: ./in_netns.sh: No such file or directory [FAIL] In current code added in_netns.sh to be installed. Fixes: cc30c93f ("selftests/net: ignore background traffic in psock_fanout") Signed-off-by:
Anders Roxell <anders.roxell@linaro.org> Signed-off-by:
-
David S. Miller authored
Nathan Fontenot says: ==================== ibmvnic: Fix parameter change request handling When updating parameters for the ibmvnic driver there is a possibility of entering an infinite loop if a return value other that a partial success is received from sending the login CRQ. Also, a deadlock can occur on the rtnl lock if netdev_notify_peers() is called during driver reset for a parameter change reset. This patch set corrects both of these issues by updating the return code handling in ibmvnic_login() nand gaurding against calling netdev_notify_peers() for parameter change requests. Updates for V2: Correct spelling mistakes in commit messages. ==================== Signed-off-by: -
Nathan Fontenot authored
When attempting to change the driver parameters, such as the MTU value or number of queues, do not call netdev_notify_peers(). Doing so will deadlock on the rtnl_lock. Signed-off-by:
Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by:
-
