One EPROBE_DEFER handling fix for the JDI LT070ME05000, a timing fix for
the AUO G121EAN01 panel, an integer overflow and a memory leak fixes for
the qaic accel, a use-after-free fix for nouveau and a revert for an
alleged fix in EDID parsing.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3olqt33em5uhxzjbqghwcwnvmw73h7bxkbdxookmnkecymd4vc@7ogm6gewpprq

Merge tag 'drm-intel-fixes-2023-08-17' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Fix the flow for ignoring GuC SLPC efficient frequency selection (Vinay)
- Fix SDVO panel_type initialization (Jani)
- Fix display probe for IVB Q and IVB D GT2 server (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZN4yduyBU1Ev9dc7@intel.com

This reverts commit ca62297b.

Commit ca62297b ("drm/edid: Fix csync detailed mode parsing") fixed
EDID detailed mode sync parsing. Unfortunately, there are quite a few
displays out there that have bogus (zero) sync field that are broken by
the change. Zero means analog composite sync, which is not right for
digital displays, and the modes get rejected. Regardless, it used to
work, and it needs to continue to work. Revert the change.

Rejecting modes with analog composite sync was the part that fixed the
gitlab issue 8146 [1]. We'll need to get back to the drawing board with
that.

[1] https://gitlab.freedesktop.org/drm/intel/-/issues/8146

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8789
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8930
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9044
Fixes: ca62297b ("drm/edid: Fix csync detailed mode parsing")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.4+
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230815101907.2900768-1-jani.nikula@intel.com

We can't simply free the connector after calling drm_connector_init on it.
We need to clean up the drm side first.

It might not fix all regressions from commit 2b5d1c29
("drm/nouveau/disp: PIOR DP uses GPIO for HPD, not PMGR AUX interrupts"),
but at least it fixes a memory corruption in error handling related to
that commit.

Link: https://lore.kernel.org/lkml/20230806213107.GFZNARG6moWpFuSJ9W@fat_crate.local/
Fixes: 95983aea ("drm/nouveau/disp: add connector class")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230814144933.3956959-1-kherbst@redhat.com

The encode_dma() function has some validation on in_trans->size but it
would be more clear to move those checks to find_and_map_user_pages().

The encode_dma() had two checks:

	if (in_trans->addr + in_trans->size < in_trans->addr || !in_trans->size)
		return -EINVAL;

The in_trans->addr variable is the starting address.  The in_trans->size
variable is the total size of the transfer.  The transfer can occur in
parts and the resources->xferred_dma_size tracks how many bytes we have
already transferred.

This patch introduces a new variable "remaining" which represents the
amount we want to transfer (in_trans->size) minus the amount we have
already transferred (resources->xferred_dma_size).

I have modified the check for if in_trans->size is zero to instead check
if in_trans->size is less than resources->xferred_dma_size.  If we have
already transferred more bytes than in_trans->size then there are negative
bytes remaining which doesn't make sense.  If there are zero bytes
remaining to be copied, just return success.

The check in encode_dma() checked that "addr + size" could not overflow
and barring a driver bug that should work, but it's easier to check if
we do this in parts.  First check that "in_trans->addr +
resources->xferred_dma_size" is safe.  Then check that "xfer_start_addr +
remaining" is safe.

My final concern was that we are dealing with u64 values but on 32bit
systems the kmalloc() function will truncate the sizes to 32 bits.  So
I calculated "total = in_trans->size + offset_in_page(xfer_start_addr);"
and returned -EINVAL if it were >= SIZE_MAX.  This will not affect 64bit
systems.

Fixes: 129776ac ("accel/qaic: Add control path")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/24d3348b-25ac-4c1b-b171-9dae7c43e4e0@moroto.mountain

The temporary buffer storing slicing configuration data from user is only
freed on error.  This is a memory leak.  Free the buffer unconditionally.

Fixes: ff13be83 ("accel/qaic: Add datapath")
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230802145937.14827-1-quic_jhugo@quicinc.com

The current display probe is unable to differentiate between IVB Q and
IVB D GT2 server, as they both have the same device id, but different
subvendor and subdevice. This leads to the latter being misidentified as
the former, and should just end up not having a display. However, the no
display case returns a NULL as the display device info, and promptly
oopses.

As the IVB Q case is rare, and we're anyway moving towards GMD ID,
handle the identification requiring subvendor and subdevice as a special
case first, instead of unnecessarily growing the intel_display_ids[]
array with subvendor and subdevice.

[    5.425298] BUG: kernel NULL pointer dereference, address: 0000000000000000
[    5.426059] #PF: supervisor read access in kernel mode
[    5.426810] #PF: error_code(0x0000) - not-present page
[    5.427570] PGD 0 P4D 0
[    5.428285] Oops: 0000 [#1] PREEMPT SMP PTI
[    5.429035] CPU: 0 PID: 137 Comm: (udev-worker) Not tainted 6.4.0-1-amd64 #1  Debian 6.4.4-1
[    5.429759] Hardware name: HP HP Z220 SFF Workstation/HP Z220 SFF Workstation, BIOS 4.19-218-gb184e6e0a1 02/02/2023
[    5.430485] RIP: 0010:intel_device_info_driver_create+0xf1/0x120 [i915]
[    5.431338] Code: 48 8b 97 80 1b 00 00 89 8f c0 1b 00 00 48 89 b7 b0 1b 00 00 48 89 97 b8 1b 00 00 0f b7 fd e8 76 e8 14 00 48 89 83 50 1b 00 00 <48> 8b 08 48 89 8b c4 1b 00 00 48 8b 48 08 48 89 8b cc 1b 00 00 8b
[    5.432920] RSP: 0018:ffffb8254044fb98 EFLAGS: 00010206
[    5.433707] RAX: 0000000000000000 RBX: ffff923076e80000 RCX: 0000000000000000
[    5.434494] RDX: 0000000000000260 RSI: 0000000100001000 RDI: 000000000000016a
[    5.435277] RBP: 000000000000016a R08: ffffb8254044fb00 R09: 0000000000000000
[    5.436055] R10: ffff922d02761de8 R11: 00657361656c6572 R12: ffffffffc0e5d140
[    5.436867] R13: ffff922d00b720d0 R14: 0000000076e80000 R15: ffff923078c0cae8
[    5.437646] FS:  00007febd19a18c0(0000) GS:ffff92307c000000(0000) knlGS:0000000000000000
[    5.438434] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    5.439218] CR2: 0000000000000000 CR3: 000000010256e002 CR4: 00000000001706f0
[    5.440009] Call Trace:
[    5.440824]  <TASK>
[    5.441611]  ? __die+0x23/0x70
[    5.442394]  ? page_fault_oops+0x17d/0x4c0
[    5.443173]  ? exc_page_fault+0x7f/0x180
[    5.443949]  ? asm_exc_page_fault+0x26/0x30
[    5.444756]  ? intel_device_info_driver_create+0xf1/0x120 [i915]
[    5.445652]  ? intel_device_info_driver_create+0xea/0x120 [i915]
[    5.446545]  i915_driver_probe+0x7f/0xb60 [i915]
[    5.447431]  ? drm_privacy_screen_get+0x15c/0x1a0 [drm]
[    5.448240]  local_pci_probe+0x45/0xa0
[    5.449013]  pci_device_probe+0xc7/0x240
[    5.449748]  really_probe+0x19e/0x3e0
[    5.450464]  ? __pfx___driver_attach+0x10/0x10
[    5.451172]  __driver_probe_device+0x78/0x160
[    5.451870]  driver_probe_device+0x1f/0x90
[    5.452601]  __driver_attach+0xd2/0x1c0
[    5.453293]  bus_for_each_dev+0x88/0xd0
[    5.453989]  bus_add_driver+0x116/0x220
[    5.454672]  driver_register+0x59/0x100
[    5.455336]  i915_init+0x25/0xc0 [i915]
[    5.456104]  ? __pfx_i915_init+0x10/0x10 [i915]
[    5.456882]  do_one_initcall+0x5d/0x240
[    5.457511]  do_init_module+0x60/0x250
[    5.458126]  __do_sys_finit_module+0xac/0x120
[    5.458721]  do_syscall_64+0x60/0xc0
[    5.459314]  ? syscall_exit_to_user_mode+0x1b/0x40
[    5.459897]  ? do_syscall_64+0x6c/0xc0
[    5.460510]  entry_SYSCALL_64_after_hwframe+0x72/0xdc
[    5.461082] RIP: 0033:0x7febd20b0eb9
[    5.461648] Code: 08 89 e8 5b 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 2f 1f 0d 00 f7 d8 64 89 01 48
[    5.462905] RSP: 002b:00007fffabb1ba78 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[    5.463554] RAX: ffffffffffffffda RBX: 0000561e6304f410 RCX: 00007febd20b0eb9
[    5.464201] RDX: 0000000000000000 RSI: 00007febd2244f0d RDI: 0000000000000015
[    5.464869] RBP: 00007febd2244f0d R08: 0000000000000000 R09: 000000000000000a
[    5.465512] R10: 0000000000000015 R11: 0000000000000246 R12: 0000000000020000
[    5.466124] R13: 0000000000000000 R14: 0000561e63032b60 R15: 000000000000000a
[    5.466700]  </TASK>
[    5.467271] Modules linked in: i915(+) drm_buddy video crc32_pclmul sr_mod hid_generic wmi crc32c_intel i2c_algo_bit sd_mod cdrom drm_display_helper cec usbhid rc_core ghash_clmulni_intel hid sha512_ssse3 ttm sha512_generic xhci_pci ehci_pci xhci_hcd ehci_hcd nvme ahci drm_kms_helper nvme_core libahci t10_pi libata psmouse aesni_intel scsi_mod crypto_simd i2c_i801 scsi_common crc64_rocksoft_generic cryptd i2c_smbus drm lpc_ich crc64_rocksoft crc_t10dif e1000e usbcore crct10dif_generic usb_common crct10dif_pclmul crc64 crct10dif_common button
[    5.469750] CR2: 0000000000000000
[    5.470364] ---[ end trace 0000000000000000 ]---
[    5.470971] RIP: 0010:intel_device_info_driver_create+0xf1/0x120 [i915]
[    5.471699] Code: 48 8b 97 80 1b 00 00 89 8f c0 1b 00 00 48 89 b7 b0 1b 00 00 48 89 97 b8 1b 00 00 0f b7 fd e8 76 e8 14 00 48 89 83 50 1b 00 00 <48> 8b 08 48 89 8b c4 1b 00 00 48 8b 48 08 48 89 8b cc 1b 00 00 8b
[    5.473034] RSP: 0018:ffffb8254044fb98 EFLAGS: 00010206
[    5.473698] RAX: 0000000000000000 RBX: ffff923076e80000 RCX: 0000000000000000
[    5.474371] RDX: 0000000000000260 RSI: 0000000100001000 RDI: 000000000000016a
[    5.475045] RBP: 000000000000016a R08: ffffb8254044fb00 R09: 0000000000000000
[    5.475725] R10: ffff922d02761de8 R11: 00657361656c6572 R12: ffffffffc0e5d140
[    5.476405] R13: ffff922d00b720d0 R14: 0000000076e80000 R15: ffff923078c0cae8
[    5.477124] FS:  00007febd19a18c0(0000) GS:ffff92307c000000(0000) knlGS:0000000000000000
[    5.477811] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    5.478499] CR2: 0000000000000000 CR3: 000000010256e002 CR4: 00000000001706f0

Fixes: 69d43981 ("drm/i915/display: Make display responsible for probing its own IP")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8991
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804084600.1005818-1-jani.nikula@intel.com
(cherry picked from commit 14351883)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Commit 3f9ffce5 ("drm/i915: Do panel VBT init early if the VBT
declares an explicit panel type") started using -1 as the value for
unset panel_type. It gets initialized in intel_panel_init_alloc(), but
the SDVO code never calls it.

Call intel_panel_init_alloc() to initialize the panel, including the
panel_type.
Reported-by: Tomi Leppänen <tomi@tomin.site>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8896
Fixes: 3f9ffce5 ("drm/i915: Do panel VBT init early if the VBT declares an explicit panel type")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.1+
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Tested-by: Tomi Leppänen <tomi@tomin.site>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803122706.838721-1-jani.nikula@intel.com
(cherry picked from commit 26e60294)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

This should be done before the soft min/max frequencies are restored.
When we disable the "Ignore efficient frequency" flag, GuC does not
actually bring the requested freq down to RPn.

Specifically, this scenario-

- ignore efficient freq set to true
- reduce min to RPn (from efficient)
- suspend
- resume (includes GuC load, restore soft min/max, restore efficient freq)
- validate min freq has been resored to RPn

This will fail if we didn't first restore(disable, in this case) efficient
freq flag before setting the soft min frequency.

v2: Bring the min freq down to RPn when we disable efficient freq (Rodrigo)
Also made the change to set the min softlimit to RPn at init. Otherwise, we
were storing RPe there.

Link: https://gitlab.freedesktop.org/drm/intel/-/issues/8736
Fixes: 55f9720d ("drm/i915/guc/slpc: Provide sysfs for efficient freq")
Fixes: 95ccf312 ("drm/i915/guc/slpc: Allow SLPC to use efficient frequency")
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230726010044.3280402-1-vinay.belgaumkar@intel.com
(cherry picked from commit 28e67111)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Commit 03e909ac ("drm/panel: simple: Add support for AUO G121EAN01.4
panel") added support for this panel model, but the timings it implements
are very different from what the datasheet describes. I checked both the
G121EAN01.0 datasheet from [0] and the G121EAN01.4 one from [1] and they
all have the same timings: for example the LVDS clock typical value is 74.4
MHz, not 66.7 MHz as implemented.

Replace the timings with the ones from the documentation. These timings
have been tested and the clock frequencies verified with an oscilloscope to
ensure they are correct.

Also use struct display_timing instead of struct drm_display_mode in order
to also specify the minimum and maximum values.

[0] https://embedded.avnet.com/product/g121ean01-0/
[1] https://embedded.avnet.com/product/g121ean01-4/

Fixes: 03e909ac ("drm/panel: simple: Add support for AUO G121EAN01.4 panel")
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804151239.835216-1-luca.ceresoli@bootlin.com

Use the dev_err_probe() helper to simplify error handling during probe.
This also handle scenario, when EDEFER is returned and useless error is printed.

Fixes error:
panel-jdi-lt070me05000 4700000.dsi.0: cannot get enable-gpio -517
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230812185239.378582-1-david@ixit.cz

Merge tag 'kbuild-fixes-v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Clear errno before calling getline()

 - Fix a modpost warning for ARCH=alpha

* tag 'kbuild-fixes-v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  alpha: remove __init annotation from exported page_is_ram()
  scripts/kallsyms: Fix build failure by setting errno before calling getline()

Merge tag 'platform-drivers-x86-v6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform drivers fixes from Hans de Goede:

 -  lenovo-ymc driver causes keyboard + touchpad to not work with >= 6.4
    on some Thinkbook models, fix this

 -  A set of small fixes for mlx-platform

 -  Other small fixes and hw-id additions

* tag 'platform-drivers-x86-v6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: lenovo-ymc: Only bind on machines with a convertible DMI chassis-type
  platform: mellanox: Change register offset addresses
  platform: mellanox: mlx-platform: Modify graceful shutdown callback and power down mask
  platform: mellanox: mlx-platform: Fix signals polarity and latch mask
  platform: mellanox: Fix order in exit flow
  platform/x86: ISST: Reduce noise for missing numa information in logs
  platform/x86: msi-ec: Fix the build
  ACPI: scan: Create platform device for CS35L56
  platform/x86/amd/pmf: Fix unsigned comparison with less than zero

Pull SCSI fixes from James Bottomley:
 "Eleven small fixes, ten in drivers.

  Of the two fixes marked core, one is in the raid helper class (used by
  some raid device drivers) and the other one is the /proc/scsi/scsi
  parsing fix for potential reads beyond the end of the buffer"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qedf: Fix firmware halt over suspend and resume
  scsi: qedi: Fix firmware halt over suspend and resume
  scsi: qedi: Fix potential deadlock on &qedi_percpu->p_work_lock
  scsi: lpfc: Remove reftag check in DIF paths
  scsi: ufs: renesas: Fix private allocation
  scsi: snic: Fix possible memory leak if device_add() fails
  scsi: core: Fix possible memory leak if device_add() fails
  scsi: core: Fix legacy /proc parsing buffer overflow
  scsi: 53c700: Check that command slot is not NULL
  scsi: fnic: Replace return codes in fnic_clean_pending_aborts()
  scsi: storvsc: Fix handling of virtual Fibre Channel timeouts

The lenovo-ymc driver is causing the keyboard + touchpad to stop working
on some regular laptop models such as the Lenovo ThinkBook 13s G2 ITL 20V9.

The problem is that there are YMC WMI GUID methods in the ACPI tables
of these laptops, despite them not being Yogas and lenovo-ymc loading
causes libinput to see a SW_TABLET_MODE switch with state 1.

This in turn causes libinput to ignore events from the builtin keyboard
and touchpad, since it filters those out for a Yoga in tablet mode.

Similar issues with false-positive SW_TABLET_MODE=1 reporting have
been seen with the intel-hid driver.

Copy the intel-hid driver approach to fix this and only bind to the WMI
device on machines where the DMI chassis-type indicates the machine
is a convertible.

Add a 'force' module parameter to allow overriding the chassis-type check
so that users can easily test if the YMC interface works on models which
report an unexpected chassis-type.

Fixes: e82882cd ("platform/x86: Add driver for Yoga Tablet Mode switch")
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2229373
Cc: André Apitzsch <git@apitzsch.eu>
Cc: stable@vger.kernel.org
Tested-by: Andrew Kallmeyer <kallmeyeras@gmail.com>
Tested-by: Gergő Köteles <soyer@irl.hu>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230812144818.383230-1-hdegoede@redhat.com

Move debug register offsets to different location due to hardware changes.

Fixes: dd635e33 ("platform: mellanox: Introduce support of new Nvidia L1 switch")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230813083735.39090-5-vadimp@nvidia.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Use kernel_power_off() instead of kernel_halt() to pass through
machine_power_off() -> pm_power_off(), otherwise axillary power does
not go off.

Change "power down" bitmask.

Fixes: dd635e33 ("platform: mellanox: Introduce support of new Nvidia L1 switch")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230813083735.39090-4-vadimp@nvidia.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Change polarity of chassis health and power signals and fix latch reset
mask for L1 switch.

Fixes: dd635e33 ("platform: mellanox: Introduce support of new Nvidia L1 switch")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230813083735.39090-3-vadimp@nvidia.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Fix exit flow order: call mlxplat_post_exit() after
mlxplat_i2c_main_exit() in order to unregister main i2c driver before
to "mlxplat" driver.

Fixes: 0170f616 ("platform: mellanox: Split initialization procedure")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20230813083735.39090-2-vadimp@nvidia.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Pull btrfs fixes from David Sterba:
 "More fixes, some of them going back to older releases and there are
  fixes for hangs in stress tests regarding space caching:

   - fixes and progress tracking for hangs in free space caching, found
     by test generic/475

   - writeback fixes, write pages in integrity mode and skip writing
     pages that have been written meanwhile

   - properly clear end of extent range after an error

   - relocation fixes:
      - fix race betwen qgroup tree creation and relocation
      - detect and report invalid reloc roots"

* tag 'for-6.5-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: set cache_block_group_error if we find an error
  btrfs: reject invalid reloc tree root keys with stack dump
  btrfs: exit gracefully if reloc roots don't match
  btrfs: avoid race between qgroup tree creation and relocation
  btrfs: properly clear end of the unreserved range in cow_file_range
  btrfs: don't wait for writeback on clean pages in extent_write_cache_pages
  btrfs: don't stop integrity writeback too early
  btrfs: wait for actual caching progress during allocation

Pull gpio fixes from Bartosz Golaszewski:

 - mark virtual chips exposed by gpio-sim as ones that can sleep
   (callbacks must not be called from interrupt context)

 - fix an off-by-one error in gpio-ws16c48

* tag 'gpio-fixes-for-v6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: ws16c48: Fix off-by-one error in WS16C48 resource region extent
  gpio: sim: mark the GPIO chip as a one that can sleep

The only remaining consumer is new_inode, where it showed up in 2001 as
commit c37fa164 ("v2.4.9.9 -> v2.4.9.10") in a historical repo [1]
with a changelog which does not mention it.

Since then the line got only touched up to keep compiling.

While it may have been of benefit back in the day, it is guaranteed to
at best not get in the way in the multicore setting -- as the code
performs *a lot* of work between the prefetch and actual lock acquire,
any contention means the cacheline is already invalid by the time the
routine calls spin_lock().  It adds spurious traffic, for short.

On top of it prefetch is notoriously tricky to use for single-threaded
purposes, making it questionable from the get go.

As such, remove it.

I admit upfront I did not see value in benchmarking this change, but I
can do it if that is deemed appropriate.

Removal from new_inode and of the entire thing are in the same patch as
requested by Linus, so whatever weird looks can be directed at that guy.

Link: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/fs/inode.c?id=c37fa164f793735b32aa3f53154ff1a7659e6442 [1]
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull char / misc driver fixes from Greg KH:
 "Here are some small char/misc driver fixes for 6.5-rc6 that resolve
  some reported issues. Included in here are:

   - bunch of iio driver fixes for reported problems

   - interconnect driver fixes

   - counter driver build fix

   - cardreader driver fixes

   - binder driver fixes

   - other tiny driver fixes

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'char-misc-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
  misc: tps6594-esm: Disable ESM for rev 1 PMIC
  misc: rtsx: judge ASPM Mode to set PETXCFG Reg
  binder: fix memory leak in binder_init()
  iio: cros_ec: Fix the allocation size for cros_ec_command
  tools/counter: Makefile: Replace rmdir by rm to avoid make,clean failure
  iio: imu: lsm6dsx: Fix mount matrix retrieval
  iio: adc: meson: fix core clock enable/disable moment
  iio: core: Prevent invalid memory access when there is no parent
  iio: frequency: admv1013: propagate errors from regulator_get_voltage()
  counter: Fix menuconfig "Counter support" submenu entries disappearance
  dt-bindings: iio: adi,ad74115: remove ref from -nanoamp
  iio: adc: ina2xx: avoid NULL pointer dereference on OF device match
  iio: light: bu27008: Fix intensity data type
  iio: light: bu27008: Fix scale format
  iio: light: bu27034: Fix scale format
  iio: adc: ad7192: Fix ac excitation feature
  interconnect: qcom: sa8775p: add enable_mask for bcm nodes
  interconnect: qcom: sm8550: add enable_mask for bcm nodes
  interconnect: qcom: sm8450: add enable_mask for bcm nodes
  interconnect: qcom: Add support for mask-based BCMs
  ...

Pull USB / Thunderbolt driver fixes from Greg KH:
 "Here are some small USB and Thunderbolt driver fixes for reported
  problems. Included in here are:

   - thunderbolt driver memory leak fix

   - thunderbolt display flicker fix

   - usb dwc3 driver fix

   - usb gadget uvc disconnect crash fix

   - usb typec Kconfig build dependency fix

   - usb typec small fixes

   - usb-con-gpio bugfix

   - usb-storage old driver bugfix

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  thunderbolt: Fix memory leak in tb_handle_dp_bandwidth_request()
  usb: dwc3: Properly handle processing of pending events
  usb-storage: alauda: Fix uninit-value in alauda_check_media()
  usb: common: usb-conn-gpio: Prevent bailing out if initial role is none
  USB: Gadget: core: Help prevent panic during UVC unconfigure
  usb: typec: mux: intel: Add dependency on USB_COMMON
  usb: typec: nb7vpq904m: Add an error handling path in nb7vpq904m_probe()
  usb: typec: altmodes/displayport: Signal hpd when configuring pin assignment
  usb: typec: tcpm: Fix response to vsafe0V event
  thunderbolt: Fix Thunderbolt 3 display flickering issue on 2nd hot plug onwards

Pull x86 fixes from Borislav Petkov:

 - Do not parse the confidential computing blob on non-AMD hardware as
   it leads to an EFI config table ending up unmapped

 - Use the correct segment selector in the 32-bit version of getcpu() in
   the vDSO

 - Make sure vDSO and VVAR regions are placed in the 47-bit VA range
   even on 5-level paging systems

 - Add models 0x90-0x91 to the range of AMD Zenbleed-affected CPUs

* tag 'x86_urgent_for_v6.5_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu/amd: Enable Zenbleed fix for AMD Custom APU 0405
  x86/mm: Fix VDSO and VVAR placement on 5-level paging machines
  x86/linkage: Fix typo of BUILD_VDSO in asm/linkage.h
  x86/vdso: Choose the right GDT_ENTRY_CPUNODE for 32-bit getcpu() on 64-bit kernel
  x86/sev: Do not try to parse for the CC blob on non-AMD hardware

Pull x86 mitigation fixes from Borislav Petkov:
 "The first set of fallout fixes after the embargo madness. There will
  be another set next week too.

   - A first series of cleanups/unifications and documentation
     improvements to the SRSO and GDS mitigations code which got
     postponed to after the embargo date

   - Fix the SRSO aliasing addresses assertion so that the LLVM linker
     can parse it too"

* tag 'x86_bugs_for_v6.5_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  driver core: cpu: Fix the fallback cpu_show_gds() name
  x86: Move gds_ucode_mitigated() declaration to header
  x86/speculation: Add cpu_show_gds() prototype
  driver core: cpu: Make cpu_show_not_affected() static
  x86/srso: Fix build breakage with the LLVM linker
  Documentation/srso: Document IBPB aspect and fix formatting
  driver core: cpu: Unify redundant silly stubs
  Documentation/hw-vuln: Unify filename specification in index

Pull tpm irq fixes from Jarkko Sakkinen:
 "These change the probing and enabling of interrupts advertised by the
  platform firmware (i.e. ACPI, Device Tree) to be an opt-in for tpm_tis,
  which can be set from the kernel command-line.

  Note that the opt-in change is only for the PC MMIO tpm_tis module. It
  does not affect other similar drivers using IRQs, like tpm_tis_spi and
  synquacer"

* tag 'tpmdd-v6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  tpm_tis: Opt-in interrupts
  tpm: tpm_tis: Fix UPX-i11 DMI_MATCH condition

Pull rdma fixes from Jason Gunthorpe:
 "A few small bugs:

   - Fix longstanding mlx5 bug where ODP would fail with certain MR
     alignments

   - cancel work to prevent a hfi1 UAF

   - MAINTAINERS update

   - UAF, missing mutex_init and an error unwind bug in bnxt_re"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/bnxt_re: Initialize dpi_tbl_lock mutex
  RDMA/bnxt_re: Fix error handling in probe failure path
  RDMA/bnxt_re: Properly order ib_device_unalloc() to avoid UAF
  MAINTAINERS: Remove maintainer of HiSilicon RoCE
  IB/hfi1: Fix possible panic during hotplug remove
  RDMA/umem: Set iova in ODP flow

Pull zonefs fix from Damien Le Moal:

 - The switch to using iomap for executing a direct synchronous write to
   sequential files using a zone append BIO overlooked cases where the
   BIO built by iomap is too large and needs splitting, which is not
   allowed with zone append.

   Fix this by using regular write commands instead. The use of zone
   append commands will be reintroduced later with proper support from
   iomap.

* tag 'zonefs-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
  zonefs: fix synchronous direct writes to sequential files

Merge tag 'hwmon-for-v6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - Fix sporadic comunication errors in pmbus/bel-pfe and
   aquacomputer_d5next drivers

* tag 'hwmon-for-v6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (aquacomputer_d5next) Add selective 200ms delay after sending ctrl report
  hwmon: (pmbus/bel-pfe) Enable PMBUS_SKIP_STATUS_CHECK for pfe1100

Cc: stable@vger.kernel.org # v6.4+
Link: https://lore.kernel.org/linux-integrity/CAHk-=whRVp4h8uWOX1YO+Y99+44u4s=XxMK4v00B6F1mOfqPLg@mail.gmail.com/
Fixes: e644b2f4 ("tpm, tpm_tis: Enable interrupt test")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

The patch which made it to the kernel somehow changed the
match condition from
DMI_MATCH(DMI_PRODUCT_NAME, "UPX-TGL01")
to
DMI_MATCH(DMI_PRODUCT_VERSION, "UPX-TGL")

Revert back to the correct match condition to disable the
interrupt mode on the board.

Cc: stable@vger.kernel.org # v6.4+
Fixes: edb13d7b ("tpm: tpm_tis: Disable interrupts *only* for AEON UPX-i11")
Link: https://lore.kernel.org/lkml/20230524085844.11580-1-peter.ujfalusi@linux.intel.com/Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>

Merge tag 'mm-hotfixes-stable-2023-08-11-13-44' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "14 hotfixes. 11 of these are cc:stable and the remainder address
  post-6.4 issues, or are not considered suitable for -stable
  backporting"

* tag 'mm-hotfixes-stable-2023-08-11-13-44' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm/damon/core: initialize damo_filter->list from damos_new_filter()
  nilfs2: fix use-after-free of nilfs_root in dirtying inodes via iput
  selftests: cgroup: fix test_kmem_basic false positives
  fs/proc/kcore: reinstate bounce buffer for KCORE_TEXT regions
  MAINTAINERS: add maple tree mailing list
  mm: compaction: fix endless looping over same migrate block
  selftests: mm: ksm: fix incorrect evaluation of parameter
  hugetlb: do not clear hugetlb dtor until allocating vmemmap
  mm: memory-failure: avoid false hwpoison page mapped error info
  mm: memory-failure: fix potential unexpected return value from unpoison_memory()
  mm/swapfile: fix wrong swap entry type for hwpoisoned swapcache page
  radix tree test suite: fix incorrect allocation size for pthreads
  crypto, cifs: fix error handling in extract_iter_to_sg()
  zsmalloc: fix races between modifications of fullness and isolated

Commit

  522b1d69 ("x86/cpu/amd: Add a Zenbleed fix")

provided a fix for the Zen2 VZEROUPPER data corruption bug affecting
a range of CPU models, but the AMD Custom APU 0405 found on SteamDeck
was not listed, although it is clearly affected by the vulnerability.

Add this CPU variant to the Zenbleed erratum list, in order to
unconditionally enable the fallback fix until a proper microcode update
is available.

Fixes: 522b1d69 ("x86/cpu/amd: Add a Zenbleed fix")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230811203705.1699914-1-cristian.ciocaltea@collabora.com

The WinSystems WS16C48 I/O address region spans offsets 0x0 through 0xA,
which is a total of 11 bytes. Fix the WS16C48_EXTENT define to the
correct value of 11 so that access to necessary device registers is
properly requested in the ws16c48_probe() callback by the
devm_request_region() function call.

Fixes: 2c05a0f2 ("gpio: ws16c48: Implement and utilize register structures")
Cc: stable@vger.kernel.org
Cc: Paul Demetrotion <pdemetrotion@winsystems.com>
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Pull ACPI fixes from Rafael Wysocki:
 "Rework the handling of interrupt overrides on AMD Zen-based machines
  to avoid recently introduced regressions (Hans de Goede).

  Note that this is intended as a short-term mitigation for 6.5 and the
  long-term approach will be to attempt to use the configuration left by
  the BIOS, but it requires more investigation"

* tag 'acpi-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: resource: Add IRQ override quirk for PCSpecialist Elimina Pro 16 M
  ACPI: resource: Honor MADT INT_SRC_OVR settings for IRQ1 on AMD Zen
  ACPI: resource: Always use MADT override IRQ settings for all legacy non i8042 IRQs
  ACPI: resource: revert "Remove "Zen" specific match and quirks"

Pull power management fixes from Rafael Wysocki:
 "These fix an amd-pstate cpufreq driver issues and recently introduced
  hibernation-related breakage.

  Specifics:

   - Make amd-pstate use device_attributes as expected by the CPU root
     kobject (Thomas Weißschuh)

   - Restore the previous behavior of resume_store() when hibernation is
     not available which is to return the full number of bytes that were
     to be written by user space (Vlastimil Babka)"

* tag 'pm-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: amd-pstate: fix global sysfs attribute type
  PM: hibernate: fix resume_store() return value when hibernation not available

Pull block fixes from Jens Axboe:

 - NVMe pull request via Keith:
      - Fixes for request_queue state (Ming)
      - Another uuid quirk (August)

 - RCU poll fix for NVMe (Ming)

 - Fix for an IO stall with polled IO (me)

 - Fix for blk-iocost stats enable/disable accounting (Chengming)

 - Regression fix for large pages for zram (Christoph)

* tag 'block-6.5-2023-08-11' of git://git.kernel.dk/linux:
  nvme: core: don't hold rcu read lock in nvme_ns_chr_uring_cmd_iopoll
  blk-iocost: fix queue stats accounting
  block: don't make REQ_POLLED imply REQ_NOWAIT
  block: get rid of unused plug->nowait flag
  zram: take device and not only bvec offset into account
  nvme-pci: add NVME_QUIRK_BOGUS_NID for Samsung PM9B1 256G and 512G
  nvme-rdma: fix potential unbalanced freeze & unfreeze
  nvme-tcp: fix potential unbalanced freeze & unfreeze
  nvme: fix possible hang when removing a controller during error recovery

Pull io_uring fixes from Jens Axboe:
 "A followup fix for the parisc/SHM_COLOUR fix, also from Helge, which
  is heading to stable.

  And then just the io_uring equivalent of the RESOLVE_CACHED fix in
  commit a0fc452a from last week for build_open_flags()"

* tag 'io_uring-6.5-2023-08-11' of git://git.kernel.dk/linux:
  io_uring/parisc: Adjust pgoff in io_uring mmap() for parisc
  io_uring: correct check for O_TMPFILE