- 15 Aug, 2024 10 commits
-
-
Jie Wang authored
When config TC during the reset process, may cause a deadlock, the flow is as below: pf reset start │ ▼ ...... setup tc │ │ ▼ ▼ DOWN: napi_disable() napi_disable()(skip) │ │ │ ▼ ▼ ...... ...... │ │ ▼ │ napi_enable() │ ▼ UINIT: netif_napi_del() │ ▼ ...... │ ▼ INIT: netif_napi_add() │ ▼ ...... global reset start │ │ ▼ ▼ UP: napi_enable()(skip) ...... │ │ ▼ ▼ ...... napi_disable() In reset process, the driver will DOWN the port and then UINIT, in this case, the setup tc process will UP the port before UINIT, so cause the problem. Adds a DOWN process in UINIT to fix it. Fixes: bb6b94a8 ("net: hns3: Add reset interface implementation in client") Signed-off-by:Jie Wang <wangjie125@huawei.com> Signed-off-by:
Jijie Shao <shaojijie@huawei.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Peiyang Wang authored
Consider the followed case that the user change speed and reset the net interface. Before the hw change speed successfully, the driver get old old speed from hw by timer task. After reset, the previous speed is config to hw. As a result, the new speed is configed successfully but lost after PF reset. The followed pictured shows more dirrectly. +------+ +----+ +----+ | USER | | PF | | HW | +---+--+ +-+--+ +-+--+ | ethtool -s 100G | | +------------------>| set speed 100G | | +--------------------->| | | set successfully | | |<---------------------+---+ | |query cfg (timer task)| | | +--------------------->| | handle speed | | return 200G | | changing event | ethtool --reset |<---------------------+ | (100G) +------------------>| cfg previous speed |<--+ | | after reset (200G) | | +--------------------->| | | +---+ | |query cfg (timer task)| | | +--------------------->| | handle speed | | return 100G | | changing event | |<---------------------+ | (200G) | | |<--+ | |query cfg (timer task)| | +--------------------->| | | return 200G | | |<---------------------+ | | | v v v This patch save new speed if hw change speed successfully, which will be used after reset successfully. Fixes: 2d03eacc ("net: hns3: Only update mac configuation when necessary") Signed-off-by:Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by:
-
Jie Wang authored
Currently, if hns3 PF or VF FLR reset failed after five times retry, the reset done process will directly release the semaphore which has already released in hclge_reset_prepare_general. This will cause down operation fail. So this patch fixes it by adding reset state judgement. The up operation is only called after successful PF FLR reset. Fixes: 8627bded ("net: hns3: refactor the precedure of PF FLR") Fixes: f28368bb ("net: hns3: refactor the procedure of VF FLR") Signed-off-by:
-
Matthieu Baerts (NGI0) authored
When deleting netns, it is possible to still have some tasks running, e.g. background tasks like tcpdump running in the background, not stopped because the test has been interrupted. Before deleting the netns, it is then safer to kill all attached PIDs, if any. That should reduce some noises after the end of some tests, and help with the debugging of some issues. That's why this modification is seen as a "fix". Fixes: 25ae948b ("selftests/net: add lib.sh") Acked-by:
Mat Martineau <martineau@kernel.org> Signed-off-by:
Matthieu Baerts (NGI0) <matttbe@kernel.org> Acked-by:
Florian Westphal <fw@strlen.de> Reviewed-by:
Hangbin Liu <liuhangbin@gmail.com> Link: https://patch.msgid.link/20240813-upstream-net-20240813-selftests-net-lib-kill-v1-1-27b689b248b8@kernel.orgSigned-off-by:
-
Oleksij Rempel authored
Fix an issue where `devm_regulator_register()` would fail for PSE controllers that do not support current limit control, such as simple GPIO-based controllers like the podl-pse-regulator. The `REGULATOR_CHANGE_CURRENT` flag and `max_uA` constraint are now conditionally set only if the `pi_set_current_limit` operation is supported. This change prevents the regulator registration routine from attempting to call `pse_pi_set_current_limit()`, which would return `-EOPNOTSUPP` and cause the registration to fail. Fixes: 4a83abce ("net: pse-pd: Add new power limit get and set c33 features") Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Kory Maincent <kory.maincent@bootlin.com> Tested-by:
Kyle Swenson <kyle.swenson@est.tech> Link: https://patch.msgid.link/20240813073719.2304633-1-o.rempel@pengutronix.deSigned-off-by:
-
Marc Zyngier authored
Commit 94833add ("net: thunderx: Unembed netdev structure") had a go at dynamically allocating the netdev structures for the thunderx_bgx driver. This change results in my ThunderX box catching fire (to be fair, it is what it does best). The issues with this change are that: - bgx_lmac_enable() is called *after* bgx_acpi_register_phy() and bgx_init_of_phy(), both expecting netdev to be a valid pointer. - bgx_init_of_phy() populates the MAC addresses for *all* LMACs attached to a given BGX instance, and thus needs netdev for each of them to have been allocated. There is a few things to be said about how the driver mixes LMAC and BGX states which leads to this sorry state, but that's beside the point. To address this, go back to a situation where all netdev structures are allocated before the driver starts relying on them, and move the freeing of these structures to driver removal. Someone brave enough can always go and restructure the driver if they want. Fixes: 94833add ("net: thunderx: Unembed netdev structure") Signed-off-by:
Marc Zyngier <maz@kernel.org> Cc: Breno Leitao <leitao@debian.org> Cc: Sunil Goutham <sgoutham@marvell.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Simon Horman <horms@kernel.org> Reviewed-by:
Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20240812141322.1742918-1-maz@kernel.orgSigned-off-by:
-
Danielle Ratson authored
CMIS 5.2 standard section 9.4.2 defines four types of firmware update supported mechanism: None, only LPL, only EPL, both LPL and EPL. Currently, only LPL (Local Payload) type of write firmware block is supported. However, if the module supports both LPL and EPL the flashing process wrongly fails for no supporting LPL. Fix that, by allowing the write mechanism to be LPL or both LPL and EPL. Fixes: c4f78134 ("ethtool: cmis_fw_update: add a layer for supporting firmware update using CDB") Reported-by:
Vladyslav Mykhaliuk <vmykhaliuk@nvidia.com> Signed-off-by:
Danielle Ratson <danieller@nvidia.com> Reviewed-by:
Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/20240812140824.3718826-1-danieller@nvidia.comSigned-off-by:
-
Cong Wang authored
After a vsock socket has been added to a BPF sockmap, its prot->recvmsg has been replaced with vsock_bpf_recvmsg(). Thus the following recursiion could happen: vsock_bpf_recvmsg() -> __vsock_recvmsg() -> vsock_connectible_recvmsg() -> prot->recvmsg() -> vsock_bpf_recvmsg() again We need to fix it by calling the original ->recvmsg() without any BPF sockmap logic in __vsock_recvmsg(). Fixes: 634f1a71 ("vsock: support sockmap") Reported-by: syzbot+bdb4bd87b5e22058e2a4@syzkaller.appspotmail.com Tested-by: syzbot+bdb4bd87b5e22058e2a4@syzkaller.appspotmail.com Cc: Bobby Eshleman <bobby.eshleman@bytedance.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by:Cong Wang <cong.wang@bytedance.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Link: https://patch.msgid.link/20240812022153.86512-1-xiyou.wangcong@gmail.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wirelessJakub Kicinski authored
Kalle Valo says: ==================== wireless fixes for v6.11 We have few fixes to drivers. The most important here is a fix for iwlwifi which caused major slowdowns for several users. * tag 'wireless-2024-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: iwlwifi: correctly lookup DMA address in SG table wifi: mt76: mt7921: fix NULL pointer access in mt7921_ipv6_addr_change wifi: brcmfmac: cfg80211: Handle SSID based pmksa deletion wifi: rtlwifi: rtl8192du: Initialise value32 in _rtl92du_init_queue_reserved_page wifi: ath12k: use 128 bytes aligned iova in transmit path for WCN7850 ==================== Link: https://patch.msgid.link/20240814171606.E14A0C116B1@smtp.kernel.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Abhinav Jain authored
Change expected_buf from (const void *) to (const char *) in function __recvpair(). This change fixes the below warnings during test compilation: ``` In file included from msg_oob.c:14: msg_oob.c: In function ‘__recvpair’: ../../kselftest_harness.h:106:40: warning: format ‘%s’ expects argument of type ‘char *’,but argument 6 has type ‘const void *’ [-Wformat=] ../../kselftest_harness.h:101:17: note: in expansion of macro ‘__TH_LOG’ msg_oob.c:235:17: note: in expansion of macro ‘TH_LOG’ ../../kselftest_harness.h:106:40: warning: format ‘%s’ expects argument of type ‘char *’,but argument 6 has type ‘const void *’ [-Wformat=] ../../kselftest_harness.h:101:17: note: in expansion of macro ‘__TH_LOG’ msg_oob.c:259:25: note: in expansion of macro ‘TH_LOG’ ``` Fixes: d098d772 ("selftest: af_unix: Add msg_oob.c.") Signed-off-by:
Abhinav Jain <jain.abhinav177@gmail.com> Reviewed-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20240814080743.1156166-1-jain.abhinav177@gmail.comSigned-off-by:
-
- 14 Aug, 2024 2 commits
-
-
Subash Abhinov Kasiviswanathan authored
This patch is based on the discussions between Neal Cardwell and Eric Dumazet in the link https://lore.kernel.org/netdev/20240726204105.1466841-1-quic_subashab@quicinc.com/ It was correctly pointed out that tp->window_clamp would not be updated in cases where net.ipv4.tcp_moderate_rcvbuf=0 or if (copied <= tp->rcvq_space.space). While it is expected for most setups to leave the sysctl enabled, the latter condition may not end up hitting depending on the TCP receive queue size and the pattern of arriving data. The updated check should be hit only on initial MSS update from TCP_MIN_MSS to measured MSS value and subsequently if there was an update to a larger value. Fixes: 05f76b2d ("tcp: Adjust clamping window for applications specifying SO_RCVBUF") Signed-off-by:
Sean Tranchetti <quic_stranche@quicinc.com> Signed-off-by:
Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eugene Syromiatnikov authored
ssn_offset field is u32 and is placed into the netlink response with nla_put_u32(), but only 2 bytes are reserved for the attribute payload in subflow_get_info_size() (even though it makes no difference in the end, as it is aligned up to 4 bytes). Supply the correct argument to the relevant nla_total_size() call to make it less confusing. Fixes: 5147dfb5 ("mptcp: allow dumping subflow context to userspace") Signed-off-by:
Eugene Syromiatnikov <esyr@redhat.com> Reviewed-by:
-
- 13 Aug, 2024 6 commits
-
-
David Thompson authored
A recent change to the driver exposed a bug where the MAC RX filters (unicast MAC, broadcast MAC, and multicast MAC) are configured and enabled before the RX path is fully initialized. The result of this bug is that after the PHY is started packets that match these MAC RX filters start to flow into the RX FIFO. And then, after rx_init() is completed, these packets will go into the driver RX ring as well. If enough packets are received to fill the RX ring (default size is 128 packets) before the call to request_irq() completes, the driver RX function becomes stuck. This bug is intermittent but is most likely to be seen where the oob_net0 interface is connected to a busy network with lots of broadcast and multicast traffic. All the MAC RX filters must be disabled until the RX path is ready, i.e. all initialization is done and all the IRQs are installed. Fixes: f7442a63 ("mlxbf_gige: call request_irq() after NAPI initialized") Reviewed-by:
Asmaa Mnebhi <asmaa@nvidia.com> Signed-off-by:
David Thompson <davthompson@nvidia.com> Reviewed-by:
-
Long Li authored
After napi_complete_done() is called when NAPI is polling in the current process context, another NAPI may be scheduled and start running in softirq on another CPU and may ring the doorbell before the current CPU does. When combined with unnecessary rings when there is no need to arm the CQ, it triggers error paths in the hardware. This patch fixes this by calling napi_complete_done() after doorbell rings. It limits the number of unnecessary rings when there is no need to arm. MANA hardware specifies that there must be one doorbell ring every 8 CQ wraparounds. This driver guarantees one doorbell ring as soon as the number of consumed CQEs exceeds 4 CQ wraparounds. In practical workloads, the 4 CQ wraparounds proves to be big enough that it rarely exceeds this limit before all the napi weight is consumed. To implement this, add a per-CQ counter cq->work_done_since_doorbell, and make sure the CQ is armed as soon as passing 4 wraparounds of the CQ. Cc: stable@vger.kernel.org Fixes: e1b5683f ("net: mana: Move NAPI from EQ to CQ") Reviewed-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
Long Li <longli@microsoft.com> Link: https://patch.msgid.link/1723219138-29887-1-git-send-email-longli@linuxonhyperv.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/ath/athKalle Valo authored
ath.git patch for v6.11 We have a single patch for the next 6.11-rc which introduces a workaround to ath12k which addresses a WCN7850 hardware issue that prevents proper operation with unaligned transmit buffers.
-
Benjamin Berg authored
The code to lookup the scatter gather table entry assumed that it was possible to use sg_virt() in order to lookup the DMA address in a mapped scatter gather table. However, this assumption is incorrect as the DMA mapping code may merge multiple entries into one. In that case, the DMA address space may have e.g. two consecutive pages which is correctly represented by the scatter gather list entry, however the virtual addresses for these two pages may differ and the relationship cannot be resolved anymore. Avoid this problem entirely by working with the offset into the mapped area instead of using virtual addresses. With that we only use the DMA length and DMA address from the scatter gather list entries. The underlying DMA/IOMMU code is therefore free to merge two entries into one even if the virtual addresses space for the area is not continuous. Fixes: 90db5075 ("wifi: iwlwifi: use already mapped data when TXing an AMSDU") Reported-by:
Chris Bainbridge <chris.bainbridge@gmail.com> Closes: https://lore.kernel.org/r/ZrNRoEbdkxkKFMBi@debian.localSigned-off-by:
Benjamin Berg <benjamin.berg@intel.com> Tested-by:
Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20240812110640.460514-1-benjamin@sipsolutions.net
-
Bert Karwatzki authored
When disabling wifi mt7921_ipv6_addr_change() is called as a notifier. At this point mvif->phy is already NULL so we cannot use it here. Signed-off-by:
Bert Karwatzki <spasswolf@web.de> Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
-
Kuniyuki Iwashima authored
In macb_suspend(), idev->ifa_list is fetched with rcu_access_pointer() and later the pointer is dereferenced as ifa->ifa_local. So, idev->ifa_list must be fetched with rcu_dereference(). Fixes: 0cb8de39 ("net: macb: Add ARP support to WOL") Signed-off-by:
-
- 12 Aug, 2024 11 commits
-
-
Zheng Zhang authored
When there are multiple ap interfaces on one band and with WED on, turning the interface down will cause a kernel panic on MT798X. Previously, cb_priv was freed in mtk_wed_setup_tc_block() without marking NULL,and mtk_wed_setup_tc_block_cb() didn't check the value, too. Assign NULL after free cb_priv in mtk_wed_setup_tc_block() and check NULL in mtk_wed_setup_tc_block_cb(). ---------- Unable to handle kernel paging request at virtual address 0072460bca32b4f5 Call trace: mtk_wed_setup_tc_block_cb+0x4/0x38 0xffffffc0794084bc tcf_block_playback_offloads+0x70/0x1e8 tcf_block_unbind+0x6c/0xc8 ... --------- Fixes: 79968444 ("net: ethernet: mtk_wed: introduce wed wo support") Signed-off-by:
Zheng Zhang <everything411@qq.com> Signed-off-by:
-
Haiyang Zhang authored
The MANA driver's RX buffer alloc_size is passed into napi_build_skb() to create SKB. skb_shinfo(skb) is located at the end of skb, and its alignment is affected by the alloc_size passed into napi_build_skb(). The size needs to be aligned properly for better performance and atomic operations. Otherwise, on ARM64 CPU, for certain MTU settings like 4000, atomic operations may panic on the skb_shinfo(skb)->dataref due to alignment fault. To fix this bug, add proper alignment to the alloc_size calculation. Sample panic info: [ 253.298819] Unable to handle kernel paging request at virtual address ffff000129ba5cce [ 253.300900] Mem abort info: [ 253.301760] ESR = 0x0000000096000021 [ 253.302825] EC = 0x25: DABT (current EL), IL = 32 bits [ 253.304268] SET = 0, FnV = 0 [ 253.305172] EA = 0, S1PTW = 0 [ 253.306103] FSC = 0x21: alignment fault Call trace: __skb_clone+0xfc/0x198 skb_clone+0x78/0xe0 raw6_local_deliver+0xfc/0x228 ip6_protocol_deliver_rcu+0x80/0x500 ip6_input_finish+0x48/0x80 ip6_input+0x48/0xc0 ip6_sublist_rcv_finish+0x50/0x78 ip6_sublist_rcv+0x1cc/0x2b8 ipv6_list_rcv+0x100/0x150 __netif_receive_skb_list_core+0x180/0x220 netif_receive_skb_list_internal+0x198/0x2a8 __napi_poll+0x138/0x250 net_rx_action+0x148/0x330 handle_softirqs+0x12c/0x3a0 Cc: stable@vger.kernel.org Fixes: 80f6215b ("net: mana: Add support for jumbo frame") Signed-off-by:
-
Frank Li authored
Add missed property phys, which indicate how connect to serdes phy. Fix below warning: arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dtb: fsl-mc@80c000000: dpmacs:ethernet@7: Unevaluated properties are not allowed ('phys' was unexpected) Signed-off-by:Frank Li <Frank.Li@nxp.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
David S. Miller authored
Pawel Dembicki says: ==================== net: dsa: vsc73xx: fix MDIO bus access and PHY opera This series are extracted patches from net-next series [0]. The VSC73xx driver has issues with PHY configuration. This patch series fixes most of them. The first patch synchronizes the register configuration routine with the datasheet recommendations. Patches 2-3 restore proper communication on the MDIO bus. Currently, the write value isn't sent to the MDIO register, and without a busy check, communication with the PHY can be interrupted. This causes the PHY to receive improper configuration and autonegotiation could fail. The fourth patch removes the PHY reset blockade, as it is no longer required. After fixing the MDIO operations, autonegotiation became possible. The last patch removes the blockade, which became unnecessary after the MDIO operations fix. [0] https://patchwork.kernel.org/project/netdevbpf/list/?series=874739&state=%2A&archive=both ==================== Signed-off-by:
-
Pawel Dembicki authored
When the vsc73xx mdio bus work properly, the generic autonegotiation configuration works well. Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by:
-
Pawel Dembicki authored
Resetting the VSC73xx PHY was problematic because the MDIO bus, without a busy check, read and wrote incorrect register values. My investigation indicates that resetting the PHY only triggers changes in configuration. However, improper register values written earlier were only exposed after a soft reset. The reset itself wasn't the issue; rather, the problem stemmed from incorrect read and write operations. A 'soft_reset' can now proceed normally. There are no reasons to keep the VSC73xx from being reset. This commit removes the reset blockade in the 'vsc73xx_phy_write' function. Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by:
-
Pawel Dembicki authored
The VSC73xx has a busy flag used during MDIO operations. It is raised when MDIO read/write operations are in progress. Without it, PHYs are misconfigured and bus operations do not work as expected. Fixes: 05bd97fc ("net: dsa: Add Vitesse VSC73xx DSA router driver") Reviewed-by:
-
Pawel Dembicki authored
In the 'vsc73xx_phy_write' function, the register value is missing, and the phy write operation always sends zeros. This commit passes the value variable into the proper register. Fixes: 05bd97fc ("net: dsa: Add Vitesse VSC73xx DSA router driver") Reviewed-by:
-
Pawel Dembicki authored
According to the datasheet description ("Port Mode Procedure" in 5.6.2), the VSC73XX_MAC_CFG_WEXC_DIS bit is configured only for half duplex mode. The WEXC_DIS bit is responsible for MAC behavior after an excessive collision. Let's set it as described in the datasheet. Fixes: 05bd97fc ("net: dsa: Add Vitesse VSC73xx DSA router driver") Reviewed-by: -
Radhey Shyam Pandey authored
In axiethernet header fix register defines comment description to be inline with IP documentation. It updates MAC configuration register, MDIO configuration register and frame filter control description. Fixes: 8a3b7a25 ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by:
Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Dan Carpenter authored
We can't dereference "skb" after calling vcc->push() because the skb is released. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by:
-
- 11 Aug, 2024 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-qDavid S. Miller authored
ueue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-08-07 (igc) This series contains updates to igc driver only. Faizal adjusts the size of the MAC internal buffer on i226 devices to resolve an errata for leaking packet transmits. He also corrects a condition in which qbv_config_change_errors are incorrectly counted. Lastly, he adjusts the conditions for resetting the adapter when changing TSN Tx mode and corrects the conditions in which gtxoffset register is set. ==================== Signed-off-by: -
Moon Yeounsu authored
`ip_hdr(skb)->ihl << 2` is the same as `ip_hdrlen(skb)` Therefore, we should use a well-defined function not a bit shift to find the header length. It also compresses two lines to a single line. Signed-off-by:
Moon Yeounsu <yyyynoom@gmail.com> Reviewed-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
- 10 Aug, 2024 9 commits
-
-
Janne Grunau authored
wpa_supplicant 2.11 sends since 1efdba5fdc2c ("Handle PMKSA flush in the driver for SAE/OWE offload cases") SSID based PMKSA del commands. brcmfmac is not prepared and tries to dereference the NULL bssid and pmkid pointers in cfg80211_pmksa. PMKID_V3 operations support SSID based updates so copy the SSID. Fixes: a96202ac ("wifi: brcmfmac: cfg80211: Add support for PMKID_V3 operations") Cc: stable@vger.kernel.org # 6.4.x Signed-off-by:Janne Grunau <j@jannau.net> Reviewed-by:
Neal Gompa <neal@gompa.dev> Acked-by:
Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by:
-
Jakub Kicinski authored
Tariq Toukan says: ==================== mlx5 misc fixes 2024-08-08 This patchset provides misc bug fixes from the team to the mlx5 core and Eth drivers. ==================== Link: https://patch.msgid.link/20240808144107.2095424-1-tariqt@nvidia.comSigned-off-by:
-
Gal Pressman authored
The queue stats API queries the queues according to the real_num_[tr]x_queues, in case the device is down and channels were not yet created, don't try to query their statistics. To trigger the panic, run this command before the interface is brought up: ./cli.py --spec ../../../Documentation/netlink/specs/netdev.yaml --dump qstats-get --json '{"ifindex": 4}' BUG: kernel NULL pointer dereference, address: 0000000000000c00 PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 3 UID: 0 PID: 977 Comm: python3 Not tainted 6.10.0+ #40 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5e_get_queue_stats_rx+0x3c/0xb0 [mlx5_core] Code: fc 55 48 63 ee 53 48 89 d3 e8 40 3d 70 e1 85 c0 74 58 4c 89 ef e8 d4 07 04 00 84 c0 75 41 49 8b 84 24 f8 39 00 00 48 8b 04 e8 <48> 8b 90 00 0c 00 00 48 03 90 40 0a 00 00 48 89 53 08 48 8b 90 08 RSP: 0018:ffff888116be37d0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888116be3868 RCX: 0000000000000004 RDX: ffff88810ada4000 RSI: 0000000000000000 RDI: ffff888109df09c0 RBP: 0000000000000000 R08: 0000000000000004 R09: 0000000000000004 R10: ffff88813461901c R11: ffffffffffffffff R12: ffff888109df0000 R13: ffff888109df09c0 R14: ffff888116be38d0 R15: 0000000000000000 FS: 00007f4375d5c740(0000) GS:ffff88852c980000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000c00 CR3: 0000000106ada006 CR4: 0000000000370eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? __die+0x1f/0x60 ? page_fault_oops+0x14e/0x3d0 ? exc_page_fault+0x73/0x130 ? asm_exc_page_fault+0x22/0x30 ? mlx5e_get_queue_stats_rx+0x3c/0xb0 [mlx5_core] netdev_nl_stats_by_netdev+0x2a6/0x4c0 ? __rmqueue_pcplist+0x351/0x6f0 netdev_nl_qstats_get_dumpit+0xc4/0x1b0 genl_dumpit+0x2d/0x80 netlink_dump+0x199/0x410 __netlink_dump_start+0x1aa/0x2c0 genl_family_rcv_msg_dumpit+0x94/0xf0 ? __pfx_genl_start+0x10/0x10 ? __pfx_genl_dumpit+0x10/0x10 ? __pfx_genl_done+0x10/0x10 genl_rcv_msg+0x116/0x2b0 ? __pfx_netdev_nl_qstats_get_dumpit+0x10/0x10 ? __pfx_genl_rcv_msg+0x10/0x10 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x21a/0x340 netlink_sendmsg+0x1f4/0x440 __sys_sendto+0x1b6/0x1c0 ? do_sock_setsockopt+0xc3/0x180 ? __sys_setsockopt+0x60/0xb0 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x50/0x110 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f43757132b0 Code: c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 1d 45 31 c9 45 31 c0 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 68 c3 0f 1f 80 00 00 00 00 41 54 48 83 ec 20 RSP: 002b:00007ffd258da048 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007ffd258da0f8 RCX: 00007f43757132b0 RDX: 000000000000001c RSI: 00007f437464b850 RDI: 0000000000000003 RBP: 00007f4375085de0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: ffffffffc4653600 R14: 0000000000000001 R15: 00007f43751a6147 </TASK> Modules linked in: netconsole xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core zram zsmalloc mlx5_core fuse [last unloaded: netconsole] CR2: 0000000000000c00 ---[ end trace 0000000000000000 ]--- RIP: 0010:mlx5e_get_queue_stats_rx+0x3c/0xb0 [mlx5_core] Code: fc 55 48 63 ee 53 48 89 d3 e8 40 3d 70 e1 85 c0 74 58 4c 89 ef e8 d4 07 04 00 84 c0 75 41 49 8b 84 24 f8 39 00 00 48 8b 04 e8 <48> 8b 90 00 0c 00 00 48 03 90 40 0a 00 00 48 89 53 08 48 8b 90 08 RSP: 0018:ffff888116be37d0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888116be3868 RCX: 0000000000000004 RDX: ffff88810ada4000 RSI: 0000000000000000 RDI: ffff888109df09c0 RBP: 0000000000000000 R08: 0000000000000004 R09: 0000000000000004 R10: ffff88813461901c R11: ffffffffffffffff R12: ffff888109df0000 R13: ffff888109df09c0 R14: ffff888116be38d0 R15: 0000000000000000 FS: 00007f4375d5c740(0000) GS:ffff88852c980000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000c00 CR3: 0000000106ada006 CR4: 0000000000370eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 7b66ae53 ("net/mlx5e: Add per queue netdev-genl stats") Signed-off-by:Gal Pressman <gal@nvidia.com> Signed-off-by:
Tariq Toukan <tariqt@nvidia.com> Reviewed-by:
Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/20240808144107.2095424-6-tariqt@nvidia.comSigned-off-by:
-
Cosmin Ratiu authored
Previously, an ethtool rx flow with no attrs would not be added to the NIC as it has no rules to configure the hw with, but it would be reported as successful to the caller (return code 0). This is confusing for the user as ethtool then reports "Added rule $num", but no rule was actually added. This change corrects that by instead reporting these wrong rules as -EINVAL. Fixes: b29c61da ("net/mlx5e: Ethtool steering flow validation refactoring") Signed-off-by:
Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by:
Saeed Mahameed <saeedm@nvidia.com> Reviewed-by:
Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by:
-
Dragos Tatulea authored
mlx5e_safe_reopen_channels() requires the state lock taken. The referenced changed in the Fixes tag removed the lock to fix another issue. This patch adds it back but at a later point (when calling mlx5e_safe_reopen_channels()) to avoid the deadlock referenced in the Fixes tag. Fixes: eab0da38 ("net/mlx5e: Fix possible deadlock on mlx5e_tx_timeout_work") Signed-off-by:
Moshe Shemesh <moshe@nvidia.com> Signed-off-by:
-
Dragos Tatulea authored
During latency tests (netperf TCP_RR) a 30% degradation of HW GRO vs SW GRO was observed. This is due to SHAMPO triggering timeout filler CQEs instead of delivering the CQE for the packet. Having a short timeout for SHAMPO doesn't bring any benefits as it is the driver that does the merging, not the hardware. On the contrary, it can have a negative impact: additional filler CQEs are generated due to the timeout. As there is no way to disable this timeout, this change sets it to the maximum value. Instead of using the packet_merge.timeout parameter which is also used for LRO, set the value directly when filling in the rest of the SHAMPO parameters in mlx5e_build_rq_param(). Fixes: 99be5617 ("net/mlx5e: SHAMPO, Re-enable HW-GRO") Signed-off-by:
-
Tariq Toukan authored
Unconditionally calling the MPIR query on BF separate mode yields the FW syndrome below [1]. Do not call it unless admin clearly specified the SD group, i.e. expressing the intention of using the multi-PF netdev feature. This fix covers cases not covered in commit fca3b479 ("net/mlx5: Do not query MPIR on embedded CPU function"). [1] mlx5_cmd_out_err:808:(pid 8267): ACCESS_REG(0x805) op_mod(0x1) failed, status bad system state(0x4), syndrome (0x685f19), err(-5) Fixes: 678eb448 ("net/mlx5: SD, Implement basic query and instantiation") Signed-off-by:
-
Jakub Kicinski authored
Jakub Sitnicki says: ==================== Don't take HW USO path when packets can't be checksummed by device This series addresses a recent regression report from syzbot [1]. After enabling UDP_SEGMENT for egress devices which don't support checksum offload [2], we need to tighten down the checks which let packets take the HW USO path. The fix consists of two parts: 1. don't let devices offer USO without checksum offload, and 2. force software USO fallback in presence of IPv6 extension headers. [1] https://lore.kernel.org/all/000000000000e1609a061d5330ce@google.com/ [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=10154dbded6d6a2fecaebdfda206609de0f121a9 v3: https://lore.kernel.org/r/20240807-udp-gso-egress-from-tunnel-v3-0-8828d93c5b45@cloudflare.com v2: https://lore.kernel.org/r/20240801-udp-gso-egress-from-tunnel-v2-0-9a2af2f15d8d@cloudflare.com v1: https://lore.kernel.org/r/20240725-udp-gso-egress-from-tunnel-v1-0-5e5530ead524@cloudflare.com ==================== Link: https://patch.msgid.link/20240808-udp-gso-egress-from-tunnel-v4-0-f5c5b4149ab9@cloudflare.comSigned-off-by:
-
Jakub Sitnicki authored
After enabling UDP GSO for devices not offering checksum offload, we have hit a regression where a bad offload warning can be triggered when sending a datagram with IPv6 extension headers. Extend the UDP GSO IPv6 tests to cover this scenario. Reviewed-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
Jakub Sitnicki <jakub@cloudflare.com> Link: https://patch.msgid.link/20240808-udp-gso-egress-from-tunnel-v4-3-f5c5b4149ab9@cloudflare.comSigned-off-by:
-
