- 29 Mar, 2023 23 commits
-
-
Kuniyuki Iwashima authored
We'll call memset(&tmp, 0, sizeof(tmp)) later. Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kuniyuki Iwashima authored
Some code defines the IPv6 wildcard address as a local variable and use it with memcmp() or ipv6_addr_equal(). Let's use in6addr_any and ipv6_addr_any() instead. Signed-off-by:
Mark Bloch <mbloch@nvidia.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
David S. Miller authored
Bobby Eshleman says: ==================== Add support for sockmap to vsock. We're testing usage of vsock as a way to redirect guest-local UDS requests to the host and this patch series greatly improves the performance of such a setup. Compared to copying packets via userspace, this improves throughput by 121% in basic testing. Tested as follows. Setup: guest unix dgram sender -> guest vsock redirector -> host vsock server Threads: 1 Payload: 64k No sockmap: - 76.3 MB/s - The guest vsock redirector was "socat VSOCK-CONNECT:2:1234 UNIX-RECV:/path/to/sock" Using sockmap (this patch): - 168.8 MB/s (+121%) - The guest redirector was a simple sockmap echo server, redirecting unix ingress to vsock 2:1234 egress. - Same sender and server programs *Note: these numbers are from RFC v1 Only the virtio transport has been tested. The loopback transport was used in writing bpf/selftests, but not thoroughly tested otherwise. This series requires the skb patch. Changes in v4: - af_vsock: fix parameter alignment in vsock_dgram_recvmsg() - af_vsock: add TCP_ESTABLISHED comment in vsock_dgram_connect() - vsock/bpf: change ret type to bool Changes in v3: - vsock/bpf: Refactor wait logic in vsock_bpf_recvmsg() to avoid backwards goto - vsock/bpf: Check psock before acquiring slock - vsock/bpf: Return bool instead of int of 0 or 1 - vsock/bpf: Wrap macro args __sk/__psock in parens - vsock/bpf: Place comment trailer */ on separate line Changes in v2: - vsock/bpf: rename vsock_dgram_* -> vsock_* - vsock/bpf: change sk_psock_{get,put} and {lock,release}_sock() order to minimize slock hold time - vsock/bpf: use "new style" wait - vsock/bpf: fix bug in wait log - vsock/bpf: add check that recvmsg sk_type is one dgram, seqpacket, or stream. Return error if not one of the three. - virtio/vsock: comment __skb_recv_datagram() usage - virtio/vsock: do not init copied in read_skb() - vsock/bpf: add ifdef guard around struct proto in dgram_recvmsg() - selftests/bpf: add vsock loopback config for aarch64 - selftests/bpf: add vsock loopback config for s390x - selftests/bpf: remove vsock device from vmtest.sh qemu machine - selftests/bpf: remove CONFIG_VIRTIO_VSOCKETS=y from config.x86_64 - vsock/bpf: move transport-related (e.g., if (!vsk->transport)) checks out of fast path ==================== Signed-off-by:Bobby Eshleman <bobby.eshleman@bytedance.com> Signed-off-by:
-
Bobby Eshleman authored
Add a test case testing the redirection from connectible AF_VSOCK sockets to connectible AF_UNIX sockets. Signed-off-by:
Stefano Garzarella <sgarzare@redhat.com> Signed-off-by:
-
Bobby Eshleman authored
Add vsock loopback to the test kernel. This allows sockmap for vsock to be tested. Signed-off-by:
-
Bobby Eshleman authored
This patch adds sockmap support for vsock sockets. It is intended to be usable by all transports, but only the virtio and loopback transports are implemented. SOCK_STREAM, SOCK_DGRAM, and SOCK_SEQPACKET are all supported. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Reviewed-by:
-
Bobby Eshleman authored
This adds the vsock_perf binary to the gitignore file. Fixes: 8abbffd2 ("test/vsock: vsock_perf utility") Signed-off-by:
Arseniy Krasnov <AVKrasnov@sberdevices.ru> Reviewed-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Donald Hunter says: ==================== ynl: add support for user headers and struct attrs Add support for user headers and struct attrs to YNL. This patchset adds features to ynl and add a partial spec for openvswitch that demonstrates use of the features. Patch 1-4 add features to ynl Patch 5 adds partial openvswitch specs that demonstrate the new features Patch 6-7 add documentation for legacy structs and for sub-type ==================== Link: https://lore.kernel.org/r/20230327083138.96044-1-donald.hunter@gmail.comSigned-off-by:
-
Donald Hunter authored
Add a definition for sub-type to the protocol spec doc and a description of its usage for C arrays in genetlink-legacy. Signed-off-by:
Donald Hunter <donald.hunter@gmail.com> Reviewed-by:
Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by:
-
Donald Hunter authored
Describe the genetlink-legacy support for using struct definitions for fixed headers and for binary attributes. Signed-off-by:
-
Donald Hunter authored
The openvswitch family has a fixed header, uses struct attrs and has array values. This partial spec demonstrates these features in the YNL CLI. These specs are sufficient to create, delete and dump datapaths and to dump vports: $ ./tools/net/ynl/cli.py \ --spec Documentation/netlink/specs/ovs_datapath.yaml \ --do dp-new --json '{ "dp-ifindex": 0, "name": "demo", "upcall-pid": 0}' None $ ./tools/net/ynl/cli.py \ --spec Documentation/netlink/specs/ovs_datapath.yaml \ --dump dp-get --json '{ "dp-ifindex": 0 }' [{'dp-ifindex': 3, 'masks-cache-size': 256, 'megaflow-stats': {'cache-hits': 0, 'mask-hit': 0, 'masks': 0, 'pad1': 0, 'padding': 0}, 'name': 'test', 'stats': {'flows': 0, 'hit': 0, 'lost': 0, 'missed': 0}, 'user-features': {'dispatch-upcall-per-cpu', 'tc-recirc-sharing', 'unaligned'}}, {'dp-ifindex': 48, 'masks-cache-size': 256, 'megaflow-stats': {'cache-hits': 0, 'mask-hit': 0, 'masks': 0, 'pad1': 0, 'padding': 0}, 'name': 'demo', 'stats': {'flows': 0, 'hit': 0, 'lost': 0, 'missed': 0}, 'user-features': set()}] $ ./tools/net/ynl/cli.py \ --spec Documentation/netlink/specs/ovs_datapath.yaml \ --do dp-del --json '{ "dp-ifindex": 0, "name": "demo"}' None $ ./tools/net/ynl/cli.py \ --spec Documentation/netlink/specs/ovs_vport.yaml \ --dump vport-get --json '{ "dp-ifindex": 3 }' [{'dp-ifindex': 3, 'ifindex': 3, 'name': 'test', 'port-no': 0, 'stats': {'rx-bytes': 0, 'rx-dropped': 0, 'rx-errors': 0, 'rx-packets': 0, 'tx-bytes': 0, 'tx-dropped': 0, 'tx-errors': 0, 'tx-packets': 0}, 'type': 'internal', 'upcall-pid': [0], 'upcall-stats': {'fail': 0, 'success': 0}}] Signed-off-by: -
Donald Hunter authored
Add support for netlink families that add an optional fixed header structure after the genetlink header and before any attributes. The fixed-header can be specified on a per op basis, or once for all operations, which serves as a default value that can be overridden. Signed-off-by:
-
Donald Hunter authored
Add support for decoding attributes that contain C structs. Signed-off-by:
-
Donald Hunter authored
Add support for decoding C arrays from binay blobs in genetlink-legacy messages. Signed-off-by:
-
Donald Hunter authored
Add python classes for struct definitions to nlspec Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5-updates-2023-03-20 mlx5 dynamic msix This patch series adds support for dynamic msix vectors allocation in mlx5. Eli Cohen Says: ================ The following series of patches modifies mlx5_core to work with the dynamic MSIX API. Currently, mlx5_core allocates all the interrupt vectors it needs and distributes them amongst the consumers. With the introduction of dynamic MSIX support, which allows for allocation of interrupts more than once, we now allocate vectors as we need them. This allows other drivers running on top of mlx5_core to allocate interrupt vectors for their own use. An example for this is mlx5_vdpa, which uses these vectors to propagate interrupts directly from the hardware to the vCPU [1]. As a preparation for using this series, a use after free issue is fixed in lib/cpu_rmap.c and the allocator for rmap entries has been modified. A complementary API for irq_cpu_rmap_add() has also been introduced. [1] https://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux.git/patch/?id=0f2bf1fcae96a83b8c5581854713c9fc3407556e ================ * tag 'mlx5-updates-2023-03-20' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: Provide external API for allocating vectors net/mlx5: Use one completion vector if eth is disabled net/mlx5: Refactor calculation of required completion vectors net/mlx5: Move devlink registration before mlx5_load net/mlx5: Use dynamic msix vectors allocation net/mlx5: Refactor completion irq request/release code net/mlx5: Improve naming of pci function vectors net/mlx5: Use newer affinity descriptor net/mlx5: Modify struct mlx5_irq to use struct msi_map net/mlx5: Fix wrong comment net/mlx5e: Coding style fix, add empty line lib: cpu_rmap: Add irq_cpu_rmap_remove to complement irq_cpu_rmap_add lib: cpu_rmap: Use allocator for rmap entries lib: cpu_rmap: Avoid use after free on rmap->obj array entries ==================== Link: https://lore.kernel.org/r/20230324231341.29808-1-saeed@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
We don't state explicitly that reverts need to be submitted as a patch. It occasionally comes up. Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230327172646.2622943-1-kuba@kernel.orgSigned-off-by:
-
Tom Rix authored
clang with W=1 reports drivers/net/ethernet/8390/axnet_cs.c:653:9: error: variable 'xfer_count' set but not used [-Werror,-Wunused-but-set-variable] int xfer_count = count; ^ This variable is not used so remove it. Signed-off-by:Tom Rix <trix@redhat.com> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230327235423.1777590-1-trix@redhat.comSigned-off-by:
-
Wolfram Sang authored
This reverts commit ce1fdb06. It turned out this actually introduces a race condition. netif_running() is not a suitable check for get_stats. Reported-by:
Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
-
Jakub Kicinski authored
Thomas Gleixner says: ==================== net, refcount: Address dst_entry reference count scalability issues This is version 3 of this series. Version 2 can be found here: https://lore.kernel.org/lkml/20230307125358.772287565@linutronix.de Wangyang and Arjan reported a bottleneck in the networking code related to struct dst_entry::__refcnt. Performance tanks massively when concurrency on a dst_entry increases. This happens when there are a large amount of connections to or from the same IP address. The memtier benchmark when run on the same host as memcached amplifies this massively. But even over real network connections this issue can be observed at an obviously smaller scale (due to the network bandwith limitations in my setup, i.e. 1Gb). How to reproduce: Run memcached with -t $N and memtier_benchmark with -t $M and --ratio=1:100 on the same machine. localhost connections amplify the problem. Start with the defaults for $N and $M and increase them. Depending on your machine this will tank at some point. But even in reasonably small $N, $M scenarios the refcount operations and the resulting false sharing fallout becomes visible in perf top. At some point it becomes the dominating issue. There are two factors which make this reference count a scalability issue: 1) False sharing dst_entry:__refcnt is located at offset 64 of dst_entry, which puts it into a seperate cacheline vs. the read mostly members located at the beginning of the struct. That prevents false sharing vs. the struct members in the first 64 bytes of the structure, but there is also dst_entry::lwtstate which is located after the reference count and in the same cache line. This member is read after a reference count has been acquired. The other problem is struct rtable, which embeds a struct dst_entry at offset 0. struct dst_entry has a size of 112 bytes, which means that the struct members of rtable which follow the dst member share the same cache line as dst_entry::__refcnt. Especially rtable::rt_genid is also read by the contexts which have a reference count acquired already. When dst_entry:__refcnt is incremented or decremented via an atomic operation these read accesses stall and contribute to the performance problem. 2) atomic_inc_not_zero() A reference on dst_entry:__refcnt is acquired via atomic_inc_not_zero() and released via atomic_dec_return(). atomic_inc_not_zero() is implemted via a atomic_try_cmpxchg() loop, which exposes O(N^2) behaviour under contention with N concurrent operations. Contention scalability is degrading with even a small amount of contenders and gets worse from there. Lightweight instrumentation exposed an average of 8!! retry loops per atomic_inc_not_zero() invocation in a inc()/dec() loop running concurrently on 112 CPUs. There is nothing which can be done to make atomic_inc_not_zero() more scalable. The following series addresses these issues: 1) Reorder and pad struct dst_entry to prevent the false sharing. 2) Implement and use a reference count implementation which avoids the atomic_inc_not_zero() problem. It is slightly less performant in the case of the final 0 -> -1 transition, but the deconstruction of these objects is a low frequency event. get()/put() pairs are in the hotpath and that's what this implementation optimizes for. The algorithm of this reference count is only suitable for RCU managed objects. Therefore it cannot replace the refcount_t algorithm, which is also based on atomic_inc_not_zero(), due to a subtle race condition related to the 0 -> -1 transition and the final verdict to mark the reference count dead. See details in patch 2/3. It might be just my lack of imagination which declares this to be impossible and I'd be happy to be proven wrong. As a bonus the new rcuref implementation provides underflow/overflow detection and mitigation while being performance wise on par with open coded atomic_inc_not_zero() / atomic_dec_return() pairs even in the non-contended case. The combination of these two changes results in performance gains in micro benchmarks and also localhost and networked memtier benchmarks talking to memcached. It's hard to quantify the benchmark results as they depend heavily on the micro-architecture and the number of concurrent operations. The overall gain of both changes for localhost memtier ranges from 1.2X to 3.2X and from +2% to %5% range for networked operations on a 1Gb connection. A micro benchmark which enforces maximized concurrency shows a gain between 1.2X and 4.7X!!! Obviously this is focussed on a particular problem and therefore needs to be discussed in detail. It also requires wider testing outside of the cases which this is focussed on. Though the false sharing issue is obvious and should be addressed independent of the more focussed reference count changes. The series is also available from git: git://git.kernel.org/pub/scm/linux/kernel/git/tglx/devel.git rcuref Changes vs. V2: - Rename __refcnt to __rcuref (Linus) - Fix comments and changelogs (Mark, Qiuxu) - Fixup kernel doc of generated atomic_add_negative() variants I want to say thanks to Wangyang who analyzed the issue and provided the initial fix for the false sharing problem. Further thanks go to Arjan Peter, Marc, Will and Borislav for valuable input and providing test results on machines which I do not have access to, and to Linus and Eric, Qiuxu and Mark for helpful feedback. ==================== Link: https://lore.kernel.org/r/20230323102649.764958589@linutronix.deSigned-off-by: -
Thomas Gleixner authored
Under high contention dst_entry::__refcnt becomes a significant bottleneck. atomic_inc_not_zero() is implemented with a cmpxchg() loop, which goes into high retry rates on contention. Switch the reference count to rcuref_t which results in a significant performance gain. Rename the reference count member to __rcuref to reflect the change. The gain depends on the micro-architecture and the number of concurrent operations and has been measured in the range of +25% to +130% with a localhost memtier/memcached benchmark which amplifies the problem massively. Running the memtier/memcached benchmark over a real (1Gb) network connection the conversion on top of the false sharing fix for struct dst_entry::__refcnt results in a total gain in the 2%-5% range over the upstream baseline. Reported-by:
Wangyang Guo <wangyang.guo@intel.com> Reported-by:
Arjan Van De Ven <arjan.van.de.ven@intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20230307125538.989175656@linutronix.de Link: https://lore.kernel.org/r/20230323102800.215027837@linutronix.deSigned-off-by:
-
Wangyang Guo authored
dst_entry::__refcnt is highly contended in scenarios where many connections happen from and to the same IP. The reference count is an atomic_t, so the reference count operations have to take the cache-line exclusive. Aside of the unavoidable reference count contention there is another significant problem which is caused by that: False sharing. perf top identified two affected read accesses. dst_entry::lwtstate and rtable::rt_genid. dst_entry:__refcnt is located at offset 64 of dst_entry, which puts it into a seperate cacheline vs. the read mostly members located at the beginning of the struct. That prevents false sharing vs. the struct members in the first 64 bytes of the structure, but there is also dst_entry::lwtstate which is located after the reference count and in the same cache line. This member is read after a reference count has been acquired. struct rtable embeds a struct dst_entry at offset 0. struct dst_entry has a size of 112 bytes, which means that the struct members of rtable which follow the dst member share the same cache line as dst_entry::__refcnt. Especially rtable::rt_genid is also read by the contexts which have a reference count acquired already. When dst_entry:__refcnt is incremented or decremented via an atomic operation these read accesses stall. This was found when analysing the memtier benchmark in 1:100 mode, which amplifies the problem extremly. Move the rt[6i]_uncached[_list] members out of struct rtable and struct rt6_info into struct dst_entry to provide padding and move the lwtstate member after that so it ends up in the same cache line. The resulting improvement depends on the micro-architecture and the number of CPUs. It ranges from +20% to +120% with a localhost memtier/memcached benchmark. [ tglx: Rearrange struct ] Signed-off-by:
Arjan van de Ven <arjan@linux.intel.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipJakub Kicinski authored
Pulling rcurefs from Peter for tglx's work. Link: https://lore.kernel.org/all/20230328084534.GE4253@hirez.programming.kicks-ass.net/Signed-off-by:
-
- 28 Mar, 2023 17 commits
-
-
Saeed Mahameed authored
The cited commit caused the following build break in mlx5 due to a change in size of MAX_SKB_FRAGS. error: format '%lu' expects argument of type 'long unsigned int', but argument 7 has type 'unsigned int' [-Werror=format=] Fix this by explicit casting. Fixes: 3948b059 ("net: introduce a config option to tweak MAX_SKB_FRAGS") Signed-off-by:Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20230328200723.125122-1-saeed@kernel.orgSigned-off-by:
-
Grygorii Strashko authored
By default, the tagged ingress packets to the switch from the host port P0 get internal switch priority assigned equal to the DMA CPPI channel number they came from, unless CPSW_P0_CONTROL_REG.RX_REMAP_VLAN is enabled. This causes issues with applying QoS policies and mapping packets on external port fifos, because the default configuration is vlan_aware and DMA CPPI channels are shared between all external ports. Hence enable CPSW_P0_CONTROL_REG.RX_REMAP_VLAN so packet will preserve internal switch priority assigned following the VLAN(priority) tag no matter through which DMA CPPI Channels packets enter the switch. Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
Siddharth Vadapalli <s-vadapalli@ti.com> Link: https://lore.kernel.org/r/20230327092103.3256118-1-s-vadapalli@ti.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Grygorii Strashko authored
Enable rate limiting TX DMA queues for CPSW interface by configuring the rate in absolute Mb/s units per TX queue. Example: ethtool -L eth0 tx 4 echo 100 > /sys/class/net/eth0/queues/tx-0/tx_maxrate echo 200 > /sys/class/net/eth0/queues/tx-1/tx_maxrate echo 50 > /sys/class/net/eth0/queues/tx-2/tx_maxrate echo 30 > /sys/class/net/eth0/queues/tx-3/tx_maxrate # disable echo 0 > /sys/class/net/eth0/queues/tx-0/tx_maxrate Signed-off-by: -
Paolo Abeni authored
Arseniy Krasnov says: ==================== allocate multiple skbuffs on tx This adds small optimization for tx path: instead of allocating single skbuff on every call to transport, allocate multiple skbuff's until credit space allows, thus trying to send as much as possible data without return to af_vsock.c. Also this patchset includes second patch which adds check and return from 'virtio_transport_get_credit()' and 'virtio_transport_put_credit()' when these functions are called with 0 argument. This is needed, because zero argument makes both functions to behave as no-effect, but both of them always tries to acquire spinlock. Moreover, first patch always calls function 'virtio_transport_put_credit()' with zero argument in case of successful packet transmission. ==================== Link: https://lore.kernel.org/r/b0d15942-65ba-3a32-ba8d-fed64332d8f6@sberdevices.ruSigned-off-by:
-
Arseniy Krasnov authored
Both of these functions have no effect when input argument is 0, so to avoid useless spinlock access, check argument before it. Signed-off-by:
-
Arseniy Krasnov authored
This adds small optimization for tx path: instead of allocating single skbuff on every call to transport, allocate multiple skbuff's until credit space allows, thus trying to send as much as possible data without return to af_vsock.c. Signed-off-by:
-
Thomas Gleixner authored
atomic_t based reference counting, including refcount_t, uses atomic_inc_not_zero() for acquiring a reference. atomic_inc_not_zero() is implemented with a atomic_try_cmpxchg() loop. High contention of the reference count leads to retry loops and scales badly. There is nothing to improve on this implementation as the semantics have to be preserved. Provide rcuref as a scalable alternative solution which is suitable for RCU managed objects. Similar to refcount_t it comes with overflow and underflow detection and mitigation. rcuref treats the underlying atomic_t as an unsigned integer and partitions this space into zones: 0x00000000 - 0x7FFFFFFF valid zone (1 .. (INT_MAX + 1) references) 0x80000000 - 0xBFFFFFFF saturation zone 0xC0000000 - 0xFFFFFFFE dead zone 0xFFFFFFFF no reference rcuref_get() unconditionally increments the reference count with atomic_add_negative_relaxed(). rcuref_put() unconditionally decrements the reference count with atomic_add_negative_release(). This unconditional increment avoids the inc_not_zero() problem, but requires a more complex implementation on the put() side when the count drops from 0 to -1. When this transition is detected then it is attempted to mark the reference count dead, by setting it to the midpoint of the dead zone with a single atomic_cmpxchg_release() operation. This operation can fail due to a concurrent rcuref_get() elevating the reference count from -1 to 0 again. If the unconditional increment in rcuref_get() hits a reference count which is marked dead (or saturated) it will detect it after the fact and bring back the reference count to the midpoint of the respective zone. The zones provide enough tolerance which makes it practically impossible to escape from a zone. The racy implementation of rcuref_put() requires to protect rcuref_put() against a grace period ending in order to prevent a subtle use after free. As RCU is the only mechanism which allows to protect against that, it is not possible to fully replace the atomic_inc_not_zero() based implementation of refcount_t with this scheme. The final drop is slightly more expensive than the atomic_dec_return() counterpart, but that's not the case which this is optimized for. The optimization is on the high frequeunt get()/put() pairs and their scalability. The performance of an uncontended rcuref_get()/put() pair where the put() is not dropping the last reference is still on par with the plain atomic operations, while at the same time providing overflow and underflow detection and mitigation. The performance of rcuref compared to plain atomic_inc_not_zero() and atomic_dec_return() based reference counting under contention: - Micro benchmark: All CPUs running a increment/decrement loop on an elevated reference count, which means the 0 to -1 transition never happens. The performance gain depends on microarchitecture and the number of CPUs and has been observed in the range of 1.3X to 4.7X - Conversion of dst_entry::__refcnt to rcuref and testing with the localhost memtier/memcached benchmark. That benchmark shows the reference count contention prominently. The performance gain depends on microarchitecture and the number of CPUs and has been observed in the range of 1.1X to 2.6X over the previous fix for the false sharing issue vs. struct dst_entry::__refcnt. When memtier is run over a real 1Gb network connection, there is a small gain on top of the false sharing fix. The two changes combined result in a 2%-5% total gain for that networked test. Reported-by:Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20230323102800.158429195@linutronix.de
-
Thomas Gleixner authored
atomic_add_negative() does not provide the relaxed/acquire/release variants. Provide them in preparation for a new scalable reference count algorithm. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20230323102800.101763813@linutronix.de
-
Jakub Kicinski authored
Merge tag 'linux-can-next-for-6.4-20230327' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2023-03-27 The first 2 patches by Geert Uytterhoeven add transceiver support and improve the error messages in the rcar_canfd driver. Cai Huoqing contributes 3 patches which remove a redundant call to pci_clear_master() in the c_can, ctucanfd and kvaser_pciefd driver. Frank Jungclaus's patch replaces the struct esd_usb_msg with a union in the esd_usb driver to improve readability. Markus Schneider-Pargmann contributes 5 patches to improve the performance in the m_can driver, especially for SPI attached controllers like the tcan4x5x. * tag 'linux-can-next-for-6.4-20230327' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: can: m_can: Keep interrupts enabled during peripheral read can: m_can: Disable unused interrupts can: m_can: Remove double interrupt enable can: m_can: Always acknowledge all interrupts can: m_can: Remove repeated check for is_peripheral can: esd_usb: Improve code readability by means of replacing struct esd_usb_msg with a union can: kvaser_pciefd: Remove redundant pci_clear_master can: ctucanfd: Remove redundant pci_clear_master can: c_can: Remove redundant pci_clear_master can: rcar_canfd: Improve error messages can: rcar_canfd: Add transceiver support ==================== Link: https://lore.kernel.org/r/20230327073354.1003134-1-mkl@pengutronix.deSigned-off-by:
-
Jakub Kicinski authored
Shay Agroskin says: ==================== Add tx push buf len param to ethtool This patchset adds a new sub-configuration to ethtool get/set queue params (ethtool -g) called 'tx-push-buf-len'. This configuration specifies the maximum number of bytes of a transmitted packet a driver can push directly to the underlying device ('push' mode). The motivation for pushing some of the bytes to the device has the advantages of - Allowing a smart device to take fast actions based on the packet's header - Reducing latency for small packets that can be copied completely into the device This new param is practically similar to tx-copybreak value that can be set using ethtool's tunable but conceptually serves a different purpose. While tx-copybreak is used to reduce the overhead of DMA mapping and makes no sense to use if less than the whole segment gets copied, tx-push-buf-len allows to improve performance by analyzing the packet's data (usually headers) before performing the DMA operation. The configuration can be queried and set using the commands: $ ethtool -g [interface] # ethtool -G [interface] tx-push-buf-len [number of bytes] This patchset also adds support for the new configuration in ENA driver for which this parameter ensures efficient resources management on the device side. ==================== Link: https://lore.kernel.org/r/20230323163610.1281468-1-shayagr@amazon.comSigned-off-by: -
Shay Agroskin authored
LLQ is auto enabled by the device and disabling it isn't supported on new ENA generations while on old ones causes sub-optimal performance. This patch adds advertisement of push-mode when LLQ mode is used, but rejects an attempt to modify it. Reviewed-by:
Michal Kubiak <michal.kubiak@intel.com> Signed-off-by:
Shay Agroskin <shayagr@amazon.com> Signed-off-by:
-
Shay Agroskin authored
The ENA driver allows for two distinct values for the number of bytes of the packet's payload that can be written directly to the device. For a value of 224 the driver turns on Large LLQ Header mode in which the first 224 of the packet's payload are written to the LLQ. Reviewed-by:
-
Shay Agroskin authored
With the ability to modify LLQ entry size, the size of packet's payload that can be written directly to the device changes. This patch makes the driver recalculate this information every device negotiation (also called device reset). Reviewed-by:
-
David Arinzon authored
Allow configuring the device with large LLQ headers. The Low Latency Queue (LLQ) allows the driver to write the first N bytes of the packet, along with the rest of the TX descriptors directly into device (N can be either 96 or 224 for large LLQ headers configuration). Having L4 TCP/UDP headers contained in the first 96 bytes of the packet is required to get maximum performance from the device. Reviewed-by:
David Arinzon <darinzon@amazon.com> Signed-off-by:
-
Shay Agroskin authored
Move ena_calc_io_queue_size() implementation closer to the file's beginning so that it can be later called from ena_device_init() function without adding a function declaration. Also add an empty line at some spots to separate logical blocks in funcitons. Reviewed-by:
-
Shay Agroskin authored
This attribute, which is part of ethtool's ring param configuration allows the user to specify the maximum number of the packet's payload that can be written directly to the device. Example usage: # ethtool -G [interface] tx-push-buf-len [number of bytes] Co-developed-by: -
Shay Agroskin authored
Similar to NL_SET_ERR_MSG_FMT, add a macro which sets netlink policy error message with a format string. Signed-off-by:
-
