- 24 Mar, 2014 40 commits
-
-
Lukasz Dorau authored
commit c59053a2 upstream. In the first place, the loop 'for' in the macro 'for_each_isci_host' (drivers/scsi/isci/host.h:314) is incorrect, because it accesses the 3rd element of 2 element array. After the 2nd iteration it executes the instruction: ihost = to_pci_info(pdev)->hosts[2] (while the size of the 'hosts' array equals 2) and reads an out of range element. In the second place, this loop is incorrectly optimized by GCC v4.8 (see http://marc.info/?l=linux-kernel&m=138998871911336&w=2). As a result, on platforms with two SCU controllers, the loop is executed more times than it can be (for i=0,1 and 2). It causes kernel panic during entering the S3 state and the following oops after 'rmmod isci': BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff8131360b>] __list_add+0x1b/0xc0 Oops: 0000 [#1] SMP RIP: 0010:[<ffffffff8131360b>] [<ffffffff8131360b>] __list_add+0x1b/0xc0 Call Trace: [<ffffffff81661b84>] __mutex_lock_slowpath+0x114/0x1b0 [<ffffffff81661c3f>] mutex_lock+0x1f/0x30 [<ffffffffa03e97cb>] sas_disable_events+0x1b/0x50 [libsas] [<ffffffffa03e9818>] sas_unregister_ha+0x18/0x60 [libsas] [<ffffffffa040316e>] isci_unregister+0x1e/0x40 [isci] [<ffffffffa0403efd>] isci_pci_remove+0x5d/0x100 [isci] [<ffffffff813391cb>] pci_device_remove+0x3b/0xb0 [<ffffffff813fbf7f>] __device_release_driver+0x7f/0xf0 [<ffffffff813fc8f8>] driver_detach+0xa8/0xb0 [<ffffffff813fbb8b>] bus_remove_driver+0x9b/0x120 [<ffffffff813fcf2c>] driver_unregister+0x2c/0x50 [<ffffffff813381f3>] pci_unregister_driver+0x23/0x80 [<ffffffffa04152f8>] isci_exit+0x10/0x1e [isci] [<ffffffff810d199b>] SyS_delete_module+0x16b/0x2d0 [<ffffffff81012a21>] ? do_notify_resume+0x61/0xa0 [<ffffffff8166ce29>] system_call_fastpath+0x16/0x1b The loop has been corrected. This patch fixes kernel panic during entering the S3 state and the above oops. Signed-off-by:
Lukasz Dorau <lukasz.dorau@intel.com> Reviewed-by:
Maciej Patelczyk <maciej.patelczyk@intel.com> Tested-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Williams authored
commit ddfadd77 upstream. Remove an erroneous BUG_ON() in the case of a hard reset timeout. The reset timeout handler puts the port into the "awaiting link-up" state. The timeout causes the device to be disconnected and we need to be in the awaiting link-up state to re-connect the port. The BUG_ON() made the incorrect assumption that resets never timeout and we always complete the reset in the "resetting" state. Testing this patch also uncovered that libata continues to attempt to reset the port long after the driver has torn down the context. Once the driver has committed to abandoning the link it must indicate to libata that recovery ends by returning -ENODEV from ->lldd_I_T_nexus_reset(). Acked-by:
David Milburn <dmilburn@redhat.com> Reported-by:
Xun Ni <xun.ni@intel.com> Tested-by:
-
Marc Kleine-Budde authored
commit 7e9e148a upstream. If flexcan_chip_start() in flexcan_open() fails, the interrupt is not freed, this patch adds the missing cleanup. Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Anton Blanchard authored
commit 0a13404d upstream. The unix socket code is using the result of csum_partial to hash into a lookup table: unix_hash_fold(csum_partial(sunaddr, len, 0)); csum_partial is only guaranteed to produce something that can be folded into a checksum, as its prototype explains: * returns a 32-bit number suitable for feeding into itself * or csum_tcpudp_magic The 32bit value should not be used directly. Depending on the alignment, the ppc64 csum_partial will return different 32bit partial checksums that will fold into the same 16bit checksum. This difference causes the following testcase (courtesy of Gustavo) to sometimes fail: #include <sys/socket.h> #include <stdio.h> int main() { int fd = socket(PF_LOCAL, SOCK_STREAM|SOCK_CLOEXEC, 0); int i = 1; setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &i, 4); struct sockaddr addr; addr.sa_family = AF_LOCAL; bind(fd, &addr, 2); listen(fd, 128); struct sockaddr_storage ss; socklen_t sslen = (socklen_t)sizeof(ss); getsockname(fd, (struct sockaddr*)&ss, &sslen); fd = socket(PF_LOCAL, SOCK_STREAM|SOCK_CLOEXEC, 0); if (connect(fd, (struct sockaddr*)&ss, sslen) == -1){ perror(NULL); return 1; } printf("OK\n"); return 0; } As suggested by davem, fix this by using csum_fold to fold the partial 32bit checksum into a 16bit checksum before using it. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Heinz Mauelshagen authored
commit e893fba9 upstream. In order to avoid wasting cache space a partial block at the end of the origin device is not cached. Unfortunately, the check for such a partial block at the end of the origin device was flawed. Fix accesses beyond the end of the origin device that occured due to attempted promotion of an undetected partial block by: - initializing the per bio data struct to allow cache_end_io to work properly - recognizing access to the partial block at the end of the origin device - avoiding out of bounds access to the discard bitset Otherwise, users can experience errors like the following: attempt to access beyond end of device dm-5: rw=0, want=20971520, limit=20971456 ... device-mapper: cache: promotion failed; couldn't copy block Signed-off-by:
Heinz Mauelshagen <heinzm@redhat.com> Acked-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Heinz Mauelshagen authored
commit 8b9d9666 upstream. During demotion or promotion to a cache's >2TB fast device we must not truncate the cache block's associated sector to 32bits. The 32bit temporary result of from_cblock() caused a 32bit multiplication when calculating the sector of the fast device in issue_copy_real(). Use an intermediate 64bit type to store the 32bit from_cblock() to allow for proper 64bit multiplication. Here is an example of how this bug manifests on an ext4 filesystem: EXT4-fs error (device dm-0): ext4_mb_generate_buddy:756: group 17136, 32768 clusters in bitmap, 30688 in gd; block bitmap corrupt. JBD2: Spotted dirty metadata buffer (dev = dm-0, blocknr = 0). There's a risk of filesystem corruption in case of system crash. Signed-off-by:
-
Laura Abbott authored
commit 2af120bc upstream. We received several reports of bad page state when freeing CMA pages previously allocated with alloc_contig_range: BUG: Bad page state in process Binder_A pfn:63202 page:d21130b0 count:0 mapcount:1 mapping: (null) index:0x7dfbf page flags: 0x40080068(uptodate|lru|active|swapbacked) Based on the page state, it looks like the page was still in use. The page flags do not make sense for the use case though. Further debugging showed that despite alloc_contig_range returning success, at least one page in the range still remained in the buddy allocator. There is an issue with isolate_freepages_block. In strict mode (which CMA uses), if any pages in the range cannot be isolated, isolate_freepages_block should return failure 0. The current check keeps track of the total number of isolated pages and compares against the size of the range: if (strict && nr_strict_required > total_isolated) total_isolated = 0; After taking the zone lock, if one of the pages in the range is not in the buddy allocator, we continue through the loop and do not increment total_isolated. If in the last iteration of the loop we isolate more than one page (e.g. last page needed is a higher order page), the check for total_isolated may pass and we fail to detect that a page was skipped. The fix is to bail out if the loop immediately if we are in strict mode. There's no benfit to continuing anyway since we need all pages to be isolated. Additionally, drop the error checking based on nr_strict_required and just check the pfn ranges. This matches with what isolate_freepages_range does. Signed-off-by:
Laura Abbott <lauraa@codeaurora.org> Acked-by:
Minchan Kim <minchan@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by:
Michal Nazarewicz <mina86@mina86.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Arnd Bergmann authored
commit 0a8d8c44 upstream. Since commit d25f06ea "vmxnet3: fix netpoll race condition", the vmxnet3 driver fails to build when CONFIG_PCI_MSI is disabled, because it unconditionally references the vmxnet3_msix_rx() function. To fix this, use the same #ifdef in the caller that exists around the function definition. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Shreyas Bhatewara <sbhatewara@vmware.com> Cc: "VMware, Inc." <pv-drivers@vmware.com> Cc: "David S. Miller" <davem@davemloft.net> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Neil Horman authored
commit d25f06ea upstream. vmxnet3's netpoll driver is incorrectly coded. It directly calls vmxnet3_do_poll, which is the driver internal napi poll routine. As the netpoll controller method doesn't block real napi polls in any way, there is a potential for race conditions in which the netpoll controller method and the napi poll method run concurrently. The result is data corruption causing panics such as this one recently observed: PID: 1371 TASK: ffff88023762caa0 CPU: 1 COMMAND: "rs:main Q:Reg" #0 [ffff88023abd5780] machine_kexec at ffffffff81038f3b #1 [ffff88023abd57e0] crash_kexec at ffffffff810c5d92 #2 [ffff88023abd58b0] oops_end at ffffffff8152b570 #3 [ffff88023abd58e0] die at ffffffff81010e0b #4 [ffff88023abd5910] do_trap at ffffffff8152add4 #5 [ffff88023abd5970] do_invalid_op at ffffffff8100cf95 #6 [ffff88023abd5a10] invalid_op at ffffffff8100bf9b [exception RIP: vmxnet3_rq_rx_complete+1968] RIP: ffffffffa00f1e80 RSP: ffff88023abd5ac8 RFLAGS: 00010086 RAX: 0000000000000000 RBX: ffff88023b5dcee0 RCX: 00000000000000c0 RDX: 0000000000000000 RSI: 00000000000005f2 RDI: ffff88023b5dcee0 RBP: ffff88023abd5b48 R8: 0000000000000000 R9: ffff88023a3b6048 R10: 0000000000000000 R11: 0000000000000002 R12: ffff8802398d4cd8 R13: ffff88023af35140 R14: ffff88023b60c890 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffff88023abd5b50] vmxnet3_do_poll at ffffffffa00f204a [vmxnet3] #8 [ffff88023abd5b80] vmxnet3_netpoll at ffffffffa00f209c [vmxnet3] #9 [ffff88023abd5ba0] netpoll_poll_dev at ffffffff81472bb7 The fix is to do as other drivers do, and have the poll controller call the top half interrupt handler, which schedules a napi poll properly to recieve frames Tested by myself, successfully. Signed-off-by:
Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by:
-
Bjorn Helgaas authored
commit 3cdeb713 upstream. Andreas reported that after 1f42db78 ("PCI: Enable INTx if BIOS left them disabled"), pciehp surprise removal stopped working. This happens because pci_reenable_device() on the hotplug bridge (used in the pciehp_configure_device() path) clears the Interrupt Disable bit, which apparently breaks the bridge's MSI hotplug event reporting. Previously we cleared the Interrupt Disable bit in do_pci_enable_device(), which is used by both pci_enable_device() and pci_reenable_device(). But we use pci_reenable_device() after the driver may have enabled MSI or MSI-X, and we *set* Interrupt Disable as part of enabling MSI/MSI-X. This patch clears Interrupt Disable only when MSI/MSI-X has not been enabled. Fixes: 1f42db78 PCI: Enable INTx if BIOS left them disabled Link: https://bugzilla.kernel.org/show_bug.cgi?id=71691Reported-and-tested-by:
Andreas Noever <andreas.noever@gmail.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> CC: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by:
-
Radim Krčmář authored
commit 596f3142 upstream. We always disable cr8 intercept in its handler, but only re-enable it if handling KVM_REQ_EVENT, so there can be a window where we do not intercept cr8 writes, which allows an interrupt to disrupt a higher priority task. Fix this by disabling intercepts in the same function that re-enables them when needed. This fixes BSOD in Windows 2008. Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Reviewed-by:
Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Michael Kerrisk authored
commit 4f87dac3 upstream. While testing and documenting the msgrcv() MSG_COPY flag that Stanislav Kinsbursky added in commit 4a674f34 ("ipc: introduce message queue copy feature" => kernel 3.8), I discovered a couple of bugs in the implementation. The two bugs concern MSG_COPY interactions with other msgrcv() flags, namely: (A) MSG_COPY + MSG_EXCEPT (B) MSG_COPY + !IPC_NOWAIT The bugs are distinct (and the fix for the first one is obvious), however my fix for both is a single-line patch, which is why I'm combining them in a single mail, rather than writing two mails+patches. ===== (A) MSG_COPY + MSG_EXCEPT ===== With the addition of the MSG_COPY flag, there are now two msgrcv() flags--MSG_COPY and MSG_EXCEPT--that modify the meaning of the 'msgtyp' argument in unrelated ways. Specifying both in the same call is a logical error that is currently permitted, with the effect that MSG_COPY has priority and MSG_EXCEPT is ignored. The call should give an error if both flags are specified. The patch below implements that behavior. ===== (B) (B) MSG_COPY + !IPC_NOWAIT ===== The test code that was submitted in commit 3a665531 ("selftests: IPC message queue copy feature test") shows MSG_COPY being used in conjunction with IPC_NOWAIT. In other words, if there is no message at the position 'msgtyp'. return immediately with the error in ENOMSG. What was not (fully) tested is the behavior if MSG_COPY is specified *without* IPC_NOWAIT, and there is an odd behavior. If the queue contains less than 'msgtyp' messages, then the call blocks until the next message is written to the queue. At that point, the msgrcv() call returns a copy of the newly added message, regardless of whether that message is at the ordinal position 'msgtyp'. This is clearly bogus, and problematic for applications that might want to make use of the MSG_COPY flag. I considered the following possible solutions to this problem: (1) Force the call to block until a message *does* appear at the position 'msgtyp'. (2) If the MSG_COPY flag is specified, the kernel should implicitly add IPC_NOWAIT, so that the call fails with ENOMSG for this case. (3) If the MSG_COPY flag is specified, but IPC_NOWAIT is not, generate an error (probably, EINVAL is the right one). I do not know if any application would really want to have the functionality of solution (1), especially since an application can determine in advance the number of messages in the queue using msgctl() IPC_STAT. Obviously, this solution would be the most work to implement. Solution (2) would have the effect of silently fixing any applications that tried to employ broken behavior. However, it would mean that if we later decided to implement solution (1), then user-space could not easily detect what the kernel supports (but, since I'm somewhat doubtful that solution (1) is needed, I'm not sure that this is much of a problem). Solution (3) would have the effect of informing broken applications that they are doing something broken. The downside is that this would cause a ABI breakage for any applications that are currently employing the broken behavior. However: a) Those applications are almost certainly not getting the results they expect. b) Possibly, those applications don't even exist, because MSG_COPY is currently hidden behind CONFIG_CHECKPOINT_RESTORE. The upside of solution (3) is that if we later decided to implement solution (1), user-space could determine what the kernel supports, via the error return. In my view, solution (3) is mildly preferable to solution (2), and solution (1) could still be done later if anyone really cares. The patch below implements solution (3). PS. For anyone out there still listening, it's the usual story: documenting an API (and the thinking about, and the testing of the API, that documentation entails) is the one of the single best ways of finding bugs in the API, as I've learned from a lot of experience. Best to do that documentation before releasing the API. Signed-off-by:
Michael Kerrisk <mtk.manpages@gmail.com> Acked-by:
Stanislav Kinsbursky <skinsbursky@parallels.com> Cc: Stanislav Kinsbursky <skinsbursky@parallels.com> Cc: Serge Hallyn <serge.hallyn@canonical.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
-
Alex Deucher authored
commit d03874c8 upstream. We need to check for DVI vs. HDMI when setting up duallink since HDMI is single link only. Fixes 4k modes on newer asics. bug: https://bugs.freedesktop.org/show_bug.cgi?id=75223Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Artem Fetishev authored
commit 70335abb upstream. The expected logic of proc_map_files_get_link() is either to return 0 and initialize 'path' or return an error and leave 'path' uninitialized. By the time dname_to_vma_addr() returns 0 the corresponding vma may have already be gone. In this case the path is not initialized but the return value is still 0. This results in 'general protection fault' inside d_path(). Steps to reproduce: CONFIG_CHECKPOINT_RESTORE=y fd = open(...); while (1) { mmap(fd, ...); munmap(fd, ...); } ls -la /proc/$PID/map_files Addresses https://bugzilla.kernel.org/show_bug.cgi?id=68991Signed-off-by:
Artem Fetishev <artem_fetishev@epam.com> Signed-off-by:
Aleksandr Terekhov <aleksandr_terekhov@epam.com> Reported-by: <wiebittewas@gmail.com> Acked-by:
Pavel Emelyanov <xemul@parallels.com> Acked-by:
Cyrill Gorcunov <gorcunov@openvz.org> Reviewed-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Nicholas Bellinger authored
commit a2a99cea upstream. This patch fixes a bug in iscsit_get_tpg_from_np() where the tpg->tpg_state sanity check was looking for TPG_STATE_FREE, instead of != TPG_STATE_ACTIVE. The latter is expected during a normal TPG shutdown once the tpg_state goes into TPG_STATE_INACTIVE in order to reject any new incoming login attempts. Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Rafael J. Wysocki authored
commit a4e90bed upstream. If the HW Reduced ACPI mode bit is set in the FADT, ACPICA uses the optional sleep control and sleep status registers for making the system enter sleep states (including S5), so it is not possible to use system sleep states or power it off using ACPI if the HW Reduced ACPI mode bit is set and those registers are not available. For this reason, add a new function, acpi_sleep_state_supported(), checking if the HW Reduced ACPI mode bit is set and whether or not system sleep states are usable in that case in addition to checking the return value of acpi_get_sleep_type_data() and make the ACPI sleep setup routines use that function to check the availability of system sleep states. Among other things, this prevents the kernel from attempting to use ACPI for powering off HW Reduced ACPI systems without the sleep control and sleep status registers, because ACPI power off doesn't have a chance to work on them. That allows alternative power off mechanisms that may actually work to be used on those systems. The affected machines include Dell Venue 8 Pro, Asus T100TA, Haswell Desktop SDP and Ivy Bridge EP Demo depot. References: https://bugzilla.kernel.org/show_bug.cgi?id=70931Reported-by:
Adam Williamson <awilliam@redhat.com> Tested-by:
Aubrey Li <aubrey.li@linux.intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Trond Myklebust authored
commit e1253be0 upstream. When nfs4_set_rw_stateid() can fails by returning EIO to indicate that the stateid is completely invalid, then it makes no sense to have it trigger a retry of the READ or WRITE operation. Instead, we should just have it fall through and attempt a recovery. This fixes an infinite loop in which the client keeps replaying the same bad stateid back to the server. Reported-by:
Andy Adamson <andros@netapp.com> Link: http://lkml.kernel.org/r/1393954269-3974-1-git-send-email-andros@netapp.comSigned-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Trond Myklebust authored
commit 755a48a7 upstream. The clean-up in commit 36281caa ended up removing a NULL pointer check that is needed in order to prevent an Oops in nfs_async_inode_return_delegation(). Reported-by:
"Yan, Zheng" <zheng.z.yan@intel.com> Link: http://lkml.kernel.org/r/5313E9F6.2020405@intel.com Fixes: 36281caa (NFSv4: Further clean-ups of delegation stateid validation) Signed-off-by:
-
Gabor Juhos authored
commit 61d1cf16 upstream. The 'ath79_spi_setup_cs' function initializes the chip select line of a given SPI device in order to make sure that the device is inactive. If the SPI_CS_HIGH bit is set for a given device, it means that the CS line of that device is active HIGH so it must be set to LOW initially. In case of GPIO CS lines, the 'ath79_spi_setup_cs' function does the opposite of that due to the wrong GPIO flags. Fix the code to use the correct GPIO flags. Reported-by:
Ronald Wahl <ronald.wahl@raritan.com> Signed-off-by:
Gabor Juhos <juhosg@openwrt.org> Signed-off-by:
Mark Brown <broonie@linaro.org> Signed-off-by:
-
Michele Baldessari authored
commit b28a613e upstream. Via commit 87809942 "libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk for Seagate Momentus SpinPoint M8" we added a quirk for disks named "ST1000LM024 HN-M101MBB" with firmware revision "2AR10001". As reported on https://bugzilla.redhat.com/show_bug.cgi?id=1073901, we need to also add firmware revision 2BA30001 as it is broken as well. Reported-by:
Nicholas <arealityfarbetween@googlemail.com> Signed-off-by:
Michele Baldessari <michele@acksyn.org> Tested-by:
Guilherme Amadio <guilherme.amadio@gmail.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Tejun Heo authored
commit 70044d71 upstream. PREPARE_[DELAYED_]WORK() are being phased out. They have few users and a nasty surprise in terms of reentrancy guarantee as workqueue considers work items to be different if they don't have the same work function. firewire core-device and sbp2 have been been multiplexing work items with multiple work functions. Introduce fw_device_workfn() and sbp2_lu_workfn() which invoke fw_device->workfn and sbp2_logical_unit->workfn respectively and always use the two functions as the work functions and update the users to set the ->workfn fields instead of overriding work functions using PREPARE_DELAYED_WORK(). This fixes a variety of possible regressions since a2c1c57b "workqueue: consider work function when searching for busy work items" due to which fw_workqueue lost its required non-reentrancy property. Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: linux1394-devel@lists.sourceforge.net Signed-off-by:
-
Stefan Richter authored
commit 89875833 upstream. Commit 8408dc1c "firewire: net: use dev_printk API" introduced a use-after-free in a failure path. fwnet_transmit_packet_failed(ptask) may free ptask, then the dev_err() call dereferenced it. The fix is straightforward; simply reorder the two calls. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit 45ab2813 upstream. If a module fails to add its tracepoints due to module tainting, do not create the module event infrastructure in the debugfs directory. As the events will not work and worse yet, they will silently fail, making the user wonder why the events they enable do not display anything. Having a warning on module load and the events not visible to the users will make the cause of the problem much clearer. Link: http://lkml.kernel.org/r/20140227154923.265882695@goodmis.org Fixes: 6d723736 "tracing/events: add support for modules to TRACE_EVENT" Acked-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Zhang Rui authored
commit b355cee8 upstream. ACPI table may export resource entry with 0 length. But the current code interprets this kind of resource in a wrong way. It will create a resource structure with res->end = acpi_resource->start + acpi_resource->len - 1; This patch fixes a problem on my machine that a platform device fails to be created because one of its ACPI IO resource entry (start = 0, end = 0, length = 0) is translated into a generic resource with start = 0, end = 0xffffffff. Signed-off-by:
Zhang Rui <rui.zhang@intel.com> Signed-off-by:
-
Li Zefan authored
commit 99afb0fd upstream. It's not safe to access task's cpuset after releasing task_lock(). Holding callback_mutex won't help. Signed-off-by:
Li Zefan <lizefan@huawei.com> Signed-off-by:
-
Chuansheng Liu authored
commit c685689f upstream. We hit one rare case below: T1 calling disable_irq(), but hanging at synchronize_irq() always; The corresponding irq thread is in sleeping state; And all CPUs are in idle state; After analysis, we found there is one possible scenerio which causes T1 is waiting there forever: CPU0 CPU1 synchronize_irq() wait_event() spin_lock() atomic_dec_and_test(&threads_active) insert the __wait into queue spin_unlock() if(waitqueue_active) atomic_read(&threads_active) wake_up() Here after inserted the __wait into queue on CPU0, and before test if queue is empty on CPU1, there is no barrier, it maybe cause it is not visible for CPU1 immediately, although CPU0 has updated the queue list. It is similar for CPU0 atomic_read() threads_active also. So we'd need one smp_mb() before waitqueue_active.that, but removing the waitqueue_active() check solves it as wel l and it makes things simple and clear. Signed-off-by:
Chuansheng Liu <chuansheng.liu@intel.com> Cc: Xiaoming Wang <xiaoming.wang@intel.com> Link: http://lkml.kernel.org/r/1393212590-32543-1-git-send-email-chuansheng.liu@intel.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Julius Werner authored
commit d86db25e upstream. The DELAY_INIT quirk only reduces the frequency of enumeration failures with the Logitech HD Pro C920 and C930e webcams, but does not quite eliminate them. We have found that adding a delay of 100ms between the first and second Get Configuration request makes the device enumerate perfectly reliable even after several weeks of extensive testing. The reasons for that are anyone's guess, but since the DELAY_INIT quirk already delays enumeration by a whole second, wating for another 10th of that isn't really a big deal for the one other device that uses it, and it will resolve the problems with these webcams. Signed-off-by:
Julius Werner <jwerner@chromium.org> Signed-off-by:
-
Julius Werner authored
commit e0429362 upstream. We've encountered a rare issue when enumerating two Logitech webcams after a reboot that doesn't power cycle the USB ports. They are spewing random data (possibly some leftover UVC buffers) on the second (full-sized) Get Configuration request of the enumeration phase. Since the data is random this can potentially cause all kinds of odd behavior, and since it occasionally happens multiple times (after the kernel issues another reset due to the garbled configuration descriptor), it is not always recoverable. Set the USB_DELAY_INIT quirk that seems to work around the issue. Signed-off-by:
-
Daniel J Blueman authored
commit 847d7970 upstream. For systems with multiple servers and routed fabric, all northbridges get assigned to the first server. Fix this by also using the node reported from the PCI bus. For single-fabric systems, the northbriges are on PCI bus 0 by definition, which are on NUMA node 0 by definition, so this is invarient on most systems. Tested on fam10h and fam15h single and multi-fabric systems and candidate for stable. Signed-off-by:
Daniel J Blueman <daniel@numascale.com> Acked-by:
Steffen Persvold <sp@numascale.com> Acked-by:
Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1394710981-3596-1-git-send-email-daniel@numascale.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Linus Torvalds authored
commit b01d4e68 upstream. It's an enum, not a #define, you can't use it in asm files. Introduced in commit 5fa10196 ("x86: Ignore NMIs that come in during early boot"), and sadly I didn't compile-test things like I should have before pushing out. My weak excuse is that the x86 tree generally doesn't introduce stupid things like this (and the ARM pull afterwards doesn't cause me to do a compile-test either, since I don't cross-compile). Cc: Don Zickus <dzickus@redhat.com> Cc: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
H. Peter Anvin authored
commit 5fa10196 upstream. Don Zickus reports: A customer generated an external NMI using their iLO to test kdump worked. Unfortunately, the machine hung. Disabling the nmi_watchdog made things work. I speculated the external NMI fired, caused the machine to panic (as expected) and the perf NMI from the watchdog came in and was latched. My guess was this somehow caused the hang. ---- It appears that the latched NMI stays latched until the early page table generation on 64 bits, which causes exceptions to happen which end in IRET, which re-enable NMI. Therefore, ignore NMIs that come in during early execution, until we have proper exception handling. Reported-and-tested-by:
Don Zickus <dzickus@redhat.com> Link: http://lkml.kernel.org/r/1394221143-29713-1-git-send-email-dzickus@redhat.comSigned-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
Markus Pargmann authored
commit 30c21971 upstream. There are some direct ops->enable in the regulator core driver. This is a potential issue as the function _regulator_do_enable() handles gpio regulators and the normal ops->enable calls. These gpio regulators are simply ignored when ops->enable is called directly. One possible bug is that boot-on and always-on gpio regulators are not enabled on registration. This patch replaces all ops->enable calls by _regulator_do_enable. [Handle missing enable operations -- broonie] Signed-off-by:
Markus Pargmann <mpa@pengutronix.de> Signed-off-by:
-
Linus Walleij authored
commit 052450fd upstream. Due to a problem in the MFD Kconfig it was not possible to compile the UCB battery driver for the Collie SA1100 system, in turn making it impossible to compile in the battery driver. (See patch "mfd: include all drivers in subsystem menu".) After fixing the MFD Kconfig (separate patch) a compile error appears in the Collie battery driver due to the <mach/collie.h> implicitly requiring <mach/hardware.h> through <linux/gpio.h> via <mach/gpio.h> prior to commit 40ca061b "ARM: 7841/1: sa1100: remove complex GPIO interface". Fix this up by including the required header into <mach/collie.h>. Cc: Andrea Adami <andrea.adami@gmail.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Anton Blanchard authored
commit a5b2cf5b upstream. The 64bit relocation code places a few symbols in the text segment. These symbols are only 4 byte aligned where they need to be 8 byte aligned. Add an explicit alignment. Signed-off-by:
Laurent Dufour <ldufour@linux.vnet.ibm.com> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Takashi Iwai authored
commit c5eda4c1 upstream. The mixer widget (NID 0x20) of AD1884 and AD1984 codecs isn't connected directly to the actual I/O paths but only via another mixer widget (NID 0x21). We need a similar fix as we did for AD1882. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Marius Knaust authored
commit a6b92b66 upstream. Signed-off-by:
Marius Knaust <marius.knaust@gmail.com> Signed-off-by:
-
Takashi Iwai authored
commit e805ca8b upstream. Logitech C500 (046d:0807) needs the same workaround like other Logitech Webcams. Signed-off-by:
-
Roman Volkov authored
commit 3dd77654 upstream. Actually CS4245 connected to the I2S channel 1 for capture, not channel 2. Otherwise capturing and playback does not work for CS4245. Signed-off-by:
Roman Volkov <v1ron@mail.ru> Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
-
Rob Clark authored
commit 9ef7506f upstream. A few of the simpler TTM drivers (cirrus, ast, mgag200) do not implement this function. Yet can end up somehow with an evicted bo: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [< (null)>] (null) PGD 16e761067 PUD 16e6cf067 PMD 0 Oops: 0010 [#1] SMP Modules linked in: bnep bluetooth rfkill fuse ip6t_rpfilter ip6t_REJECT ipt_REJECT xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw iptable_filter ip_tables sg btrfs zlib_deflate raid6_pq xor dm_queue_length iTCO_wdt iTCO_vendor_support coretemp kvm dcdbas dm_service_time microcode serio_raw pcspkr lpc_ich mfd_core i7core_edac edac_core ses enclosure ipmi_si ipmi_msghandler shpchp acpi_power_meter mperf nfsd auth_rpcgss nfs_acl lockd uinput sunrpc dm_multipath xfs libcrc32c ata_generic pata_acpi sr_mod cdrom sd_mod usb_storage mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit lpfc drm_kms_helper ttm crc32c_intel ata_piix bfa drm ixgbe libata i2c_core mdio crc_t10dif ptp crct10dif_common pps_core scsi_transport_fc dca scsi_tgt megaraid_sas bnx2 dm_mirror dm_region_hash dm_log dm_mod CPU: 16 PID: 2572 Comm: X Not tainted 3.10.0-86.el7.x86_64 #1 Hardware name: Dell Inc. PowerEdge R810/0H235N, BIOS 0.3.0 11/14/2009 task: ffff8801799dabc0 ti: ffff88016c884000 task.ti: ffff88016c884000 RIP: 0010:[<0000000000000000>] [< (null)>] (null) RSP: 0018:ffff88016c885ad8 EFLAGS: 00010202 RAX: ffffffffa04e94c0 RBX: ffff880178937a20 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000240004 RDI: ffff880178937a00 RBP: ffff88016c885b60 R08: 00000000000171a0 R09: ffff88007cf171a0 R10: ffffea0005842540 R11: ffffffff810487b9 R12: ffff880178937b30 R13: ffff880178937a00 R14: ffff88016c885b78 R15: ffff880179929400 FS: 00007f81ba2ef980(0000) GS:ffff88007cf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000016e763000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffffffffa0306fae ffff8801799295c0 0000000000260004 0000000000000001 ffff88016c885b60 ffffffffa0307669 00ff88007cf17738 ffff88017cf17700 ffff880178937a00 ffff880100000000 ffff880100000000 0000000079929400 Call Trace: [<ffffffffa0306fae>] ? ttm_bo_handle_move_mem+0x54e/0x5b0 [ttm] [<ffffffffa0307669>] ? ttm_bo_mem_space+0x169/0x340 [ttm] [<ffffffffa0307bd7>] ttm_bo_move_buffer+0x117/0x130 [ttm] [<ffffffff81130001>] ? perf_event_init_context+0x141/0x220 [<ffffffffa0307cb1>] ttm_bo_validate+0xc1/0x130 [ttm] [<ffffffffa04e7377>] mgag200_bo_pin+0x87/0xc0 [mgag200] [<ffffffffa04e56c4>] mga_crtc_cursor_set+0x474/0xbb0 [mgag200] [<ffffffff811971d2>] ? __mem_cgroup_commit_charge+0x152/0x3b0 [<ffffffff815c4182>] ? mutex_lock+0x12/0x2f [<ffffffffa0201433>] drm_mode_cursor_common+0x123/0x170 [drm] [<ffffffffa0205231>] drm_mode_cursor_ioctl+0x41/0x50 [drm] [<ffffffffa01f5ca2>] drm_ioctl+0x502/0x630 [drm] [<ffffffff815cbab4>] ? __do_page_fault+0x1f4/0x510 [<ffffffff8101cb68>] ? __restore_xstate_sig+0x218/0x4f0 [<ffffffff811b4445>] do_vfs_ioctl+0x2e5/0x4d0 [<ffffffff8124488e>] ? file_has_perm+0x8e/0xa0 [<ffffffff811b46b1>] SyS_ioctl+0x81/0xa0 [<ffffffff815d05d9>] system_call_fastpath+0x16/0x1b Code: Bad RIP value. RIP [< (null)>] (null) RSP <ffff88016c885ad8> CR2: 0000000000000000 Signed-off-by:
Rob Clark <rclark@redhat.com> Reviewed-by:
Jérôme Glisse <jglisse@redhat.com> Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
Will Deacon authored
commit afa31d8e upstream. The res variable is written before we've finished with the input operands (namely the lock address), so ensure that we mark it as `early clobber' to avoid unintended register sharing. Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
