Skip to content

L
linux
Switch branch/tag
  1. 16 Nov, 2016 4 commits
    • Gustavo Padovan's avatar
      drm/fence: add out-fences support · beaf5af4
      Gustavo Padovan authored 
      Support DRM out-fences by creating a sync_file with a fence for each CRTC
that sets the OUT_FENCE_PTR property.

We use the out_fence pointer received in the OUT_FENCE_PTR prop to send
the sync_file fd back to userspace.

The sync_file and fd are allocated/created before commit, but the
fd_install operation only happens after we know that commit succeed.

v2: Comment by Rob Clark:
	- Squash commit that adds DRM_MODE_ATOMIC_OUT_FENCE flag here.

    Comment by Daniel Vetter:
	- Add clean up code for out_fences

v3: Comments by Daniel Vetter:
	- create DRM_MODE_ATOMIC_EVENT_MASK
	- userspace should fill out_fences_ptr with the crtc_ids for which
	it wants fences back.

v4: Create OUT_FENCE_PTR properties and remove old approach.

v5: Comments by Brian Starkey:
	- Remove extra fence_get() in atomic_ioctl()
	- Check ret before iterating on the crtc_state
	- check ret before fd_install
	- set fence_state to NULL at the beginning
	- check fence_state->out_fence_ptr before put_user()
	- change order of fput() and put_unused_fd() on failure

     - Add access_ok() check to the out_fence_ptr received
     - Rebase after fence -> dma_fence rename
     - Store out_fence_ptr in the drm_atomic_state
     - Split crtc_setup_out_fence()
     - return -1 as out_fence with TEST_ONLY flag

v6: Comments by Daniel Vetter
	- Add prepare/unprepare_crtc_signaling()
	- move struct drm_out_fence_state to drm_atomic.c
	- mark get_crtc_fence() as static

    Comments by Brian Starkey
	- proper set fence_ptr fence_state array
	- isolate fence_idx increment

    - improve error handling

v7: Comments by Daniel Vetter
	- remove prefix from internal functions
	- make out_fence_ptr an s64 pointer
	- degrade DRM_INFO to DRM_DEBUG_ATOMIC when put_user fail
	- fix doc issues
	- filter out OUT_FENCE_PTR == NULL and do not fail in this case
	- add complete_crtc_signalling()
	- krealloc fence_state on demand

    Comment by Brian Starkey
	- remove unused crtc_state arg from get_out_fence()

v8: Comment by Brian Starkey
	- cancel events before check for !fence_state
	- convert a few lefovers u64 types for out_fence_ptr
	- fix memleak by assign fence_state earlier after realloc
	- proper accout num_fences in case of error

v9: Comment by Brian Starkey
	- memset last position of fence_state after krealloc
    Comments by Sean Paul
	- pass install_fds in complete_crtc_signaling() instead of ret

     - put_user(-1, fence_ptr) when decoding props

v10: Comment by Brian Starkey
	- remove unneeded num_fences increment on error path
	- kfree fence_state after installing fences fd

v11: rebase against latest drm-misc

v12: rebase again against latest drm-misc
Signed-off-by: default avatarGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Brian Starkey <brian.starkey@arm.com> (v10)
Reviewed-by: default avatarSean Paul <seanpaul@chromium.org>
Tested-by: Robert Foss <robert.foss@collabora.com> (v10)
[danvet: Appease checkpatch.]
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1479301221-13056-1-git-send-email-gustavo@padovan.org
      beaf5af4
    • Gustavo Padovan's avatar
      drm/fence: add fence timeline to drm_crtc · 6d6003c4
      Gustavo Padovan authored 
      Create one timeline context for each CRTC to be able to handle out-fences
and signal them. It adds a few members to struct drm_crtc: fence_context,
where we store the context we get from fence_context_alloc(), the
fence seqno and the fence lock, that we pass in fence_init() to be
used by the fence.

v2: Comment by Daniel Stone:
	- add BUG_ON() to fence_to_crtc() macro

v3: Comment by Ville Syrjälä
	- Use more meaningful name as crtc timeline name

v4: Comments by Brian Starkey
	- Use even more meaninful name for the crtc timeline
	- add doc for timeline_name
    Comment by Daniel Vetter
	- use in-line style for comments

    - rebase after fence -> dma_fence rename

v5: Comment by Daniel Vetter
	- Add doc for drm_crtc_fence_ops

v6: Comment by Chris Wilson
	- Move fence_to_crtc to drm_crtc.c
	- Move export of drm_crtc_fence_ops to drm_crtc_internal.h

    - rebase against latest drm-misc
Signed-off-by: default avatarGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v5)
Reviewed-by: Sean Paul <seanpaul@chromium.org> (v5)
Tested-by: Robert Foss <robert.foss@collabora.com> (v5)
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1479220628-10204-1-git-send-email-gustavo@padovan.org
      6d6003c4
    • Gustavo Padovan's avatar
      drm/fence: add in-fences support · 96260142
      Gustavo Padovan authored 
      There is now a new property called IN_FENCE_FD attached to every plane
state that receives sync_file fds from userspace via the atomic commit
IOCTL.

The fd is then translated to a fence (that may be a fence_array
subclass or just a normal fence) and then used by DRM to fence_wait() for
all fences in the sync_file to signal. So it only commits when all
framebuffers are ready to scanout.

v2: Comments by Daniel Vetter:
	- remove set state->fence = NULL in destroy phase
	- accept fence -1 as valid and just return 0
	- do not call fence_get() - sync_file_fences_get() already calls it
	- fence_put() if state->fence is already set, in case userspace
	set the property more than once.

v3: WARN_ON if fence is set but state has no FB

v4: Comment from Maarten Lankhorst
	- allow set fence with no related fb

v5: rename FENCE_FD to IN_FENCE_FD

v6: Comments by Daniel Vetter:
	- rename plane_state->in_fence back to "fence"
	- re-introduce WARN_ON if fence set but no fb

     - rebase after fence -> dma_fence rename

v7: Comments by Brian Starkey
	- set state->fence to NULL when duplicating the state
	- fail if IN_FENCE_FD was already set

v8: rebase against latest drm-misc
Signed-off-by: default avatarGustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: default avatarBrian Starkey <brian.starkey@arm.com>
Reviewed-by: default avatarSean Paul <seanpaul@chromium.org>
Tested-by: default avatarRobert Foss <robert.foss@collabora.com>
[danvet: Rebase onto extracted drm_mode_config.[hc].]
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
      96260142
    • Jianqun Xu's avatar
      drm/bridge: analogix_dp: return error if transfer none byte · 19423ba7
      Jianqun Xu authored 
      Reference from drm_dp_aux description (about transfer):
Upon success, the implementation should return the number of payload bytes
that were transferred, or a negative error-code on failure. Helpers
propagate errors from the .transfer() function, with the exception of
the -EBUSY error, which causes a transaction to be retried. On a short,
helpers will return -EPROTO to make it simpler to check for failure.

The analogix_dp_transfer will return num_transferred, but if there is none
byte been transferred, the return value will be 0, which means success, we
should return error-code if transfer none byte.

for (retry = 0; retry < 32; retry++) {
	err = aux->transfer(aux, &msg);
	if (err < 0) {
		if (err == -EBUSY)
			continue;

		goto unlock;
	}
}

Cc: zain wang <wzz@rock-chips.com>
Reviewed-by: default avatarSean Paul <seanpaul@chromium.org>
Signed-off-by: default avatarJianqun Xu <jay.xu@rock-chips.com>
Signed-off-by: default avatarArchit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1479255219-7243-1-git-send-email-jay.xu@rock-chips.com
      19423ba7
  3. 15 Nov, 2016 24 commits
  5. 14 Nov, 2016 12 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7