- 10 Apr, 2024 29 commits
-
-
George Shen authored
[Why/How] Some issues may require a trace of the previous SMU messages from DC to understand the context and aid in debugging. Actual logging to be implemented when needed. Reviewed-by:
Josip Pavic <josip.pavic@amd.com> Acked-by:
Roman Li <roman.li@amd.com> Signed-off-by:
George Shen <george.shen@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Sung Joon Kim authored
[why] As per programming guide, we need to enable the virtual pixel clock via DTBCLK DTO and ungate the clock before we begin programming OPP/OPTC control registers. Otherwise, the double-buffered registers will be left pending until the clocks are enabled. [how] Move the DTBCLK DTO programming up to where we do the legacy DP DTO programming. Reviewed-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by:
Sung Joon Kim <sungjoon.kim@amd.com> Tested-by:
-
Wenjing Liu authored
[why] There is an ambiguity in subvp pipe topology log. The log doesn't show subvp relation to main stream and it is not clear that certain stream is an internal stream for subvp pipes. [how] Separate subvp pipe topology logging from main pipe topology. Log main stream indices instead of the internal stream for subvp pipes. The following is a sample log showing 2 streams with subvp enabled on both: pipe topology update ________________________ | plane0 slice0 stream0| |DPP1----OPP1----OTG1----| | plane0 slice0 stream1| |DPP0----OPP0----OTG0----| | (phantom pipes) | | plane0 slice0 stream0| |DPP3----OPP3----OTG3----| | plane0 slice0 stream1| |DPP2----OPP2----OTG2----| |________________________| Reviewed-by:
Alvin Lee <alvin.lee2@amd.com> Acked-by:
Wenjing Liu <wenjing.liu@amd.com> Tested-by:
-
Dillon Varone authored
[WHY&HOW] Update dmub and driver interface for future FAMS revisions. Reviewed-by:
Anthony Koo <anthony.koo@amd.com> Acked-by:
Dillon Varone <dillon.varone@amd.com> Tested-by:
-
Danijel Slivka authored
Apply this rule to all newer asics in sriov case. For asic with VF MMIO access protection avoid using CPU for VM table updates. CPU pagetable updates have issues with HDP flush as VF MMIO access protection blocks write to BIF_BX_DEV0_EPF0_VF0_HDP_MEM_COHERENCY_FLUSH_CNTL register during sriov runtime. Moved the check to amdgpu_device_init() to ensure it is done after amdgpu_device_ip_early_init() where the IP versions are discovered. Signed-off-by:
Danijel Slivka <danijel.slivka@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Arunpravin Paneer Selvam authored
Enable pipe1 support starting from SIENNA CICHLID asic Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2117Reviewed-by:
Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Signed-off-by:
ZhenGuo Yin <zhenguo.yin@amd.com> Signed-off-by:
-
ZhenGuo Yin authored
Use correct ref/mask for differnent gfx ring pipe. This should fix the gfx hang issue after enabling gfx pipe1. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2117Reviewed-by:
-
Joshua Aberback authored
[Why] The function to count the number of valid connectors does not guarantee that the first n indices are valid, only that there exist n valid indices. When invalid indices are present, this results in later valid connectors being missed, as processing would end after checking n indices. [How] - count valid indices separately from total indices examined - add explicit definition of MAX_LINKS Reviewed-by:
Joshua Aberback <joshua.aberback@amd.com> Tested-by:
-
Hersen Wu authored
[Why] Mst slot nums equals to pbn / pbn_div. Today, pbn_div refers to dm_mst_get_pbn_divider -> dc_link_bandwidth_kbps. In dp_link_bandwidth_kbps, which includes effect of FEC overhead already. As result, we should not include effect of FEC overhead again while calculating pbn by kpbs_to_peak_pbn (stream_kbps). [How] Include FEC overhead within dp_link_bandwidth_kbps. Remove FEC overhead from kbps_to_peak_pbn. Reviewed-by:
Wayne Lin <wayne.lin@amd.com> Acked-by:
Hersen Wu <hersenxs.wu@amd.com> Tested-by:
-
Tao Zhou authored
SDMA_CNTL is not set in some cases, driver configures it by itself. v2: simplify code Signed-off-by:
Tao Zhou <tao.zhou1@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Leon Huang authored
[Why] Dmub provides several Replay residency calculation methods, but current interface only supports either ALPM or PHY mode [How] Modify the interface for supporting different types of Replay residency calculation. Reviewed-by:
Robin Chen <robin.chen@amd.com> Acked-by:
Leon Huang <leon.huang1@amd.com> Tested-by:
-
Daniel Miess authored
[Why] With root clock optimization now enabled for DCN35 there are still RCO registers still not being toggled [How] Add in logic to toggle RCO registers for DPPCLK, DPSTREAMCLK and DSCCLK Reviewed-by:
Charlene Liu <charlene.liu@amd.com> Acked-by:
Daniel Miess <daniel.miess@amd.com> Tested-by:
-
Wenjing Liu authored
[why] There could be cases that we are transition from MPC to ODM combine. In this case if we map pipes before unmapping MPC pipes, we might temporarly run out of pipes. The change reorders pipe resource allocation. So we unmapping pipes before mapping new pipes. Reviewed-by:
-
Samson Tam authored
[Why] In two display configuration, switching between subvp and non-subvp may cause underflow because it moves an existing pipe between displays [How] Create helper function for applying pipe split flags Apply pipe split flags prior to deciding on subvp During subvp check, do not merge pipes, so it can retain previous pipe configuration Add check for prev odm pipe in subvp check For single display subvp case, use same odm policy for phantom pipes as main subvp pipe Reviewed-by:
Samson Tam <samson.tam@amd.com> Tested-by:
-
Hersen Wu authored
[Why] Mode pbn is not calculated correctly because timing pixel encoding is not checked within convert_dc_color_depth_into_bpc. [How] Get mode kbps from dc_bandwidth_in_kbps_from_timing, then calculate pbn by kbps_to_peak_pbn. Reviewed-by:
-
Mounika Adhuri authored
[why & how] Modified definitions of 1 function and 2 structs to remove warnings on certain specific compiler configurations due to redefinition. Reviewed-by:
Martin Leung <martin.leung@amd.com> Acked-by:
Mounika Adhuri <moadhuri@amd.com> Tested-by:
-
Yifan Zhang authored
This patch to add smu 14.0.1 support Reviewed-by:
Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by:
-
lima1002 authored
update ppsmc.h pmfw.h and driver_if.h for smu v14_0_1 Reviewed-by:
lima1002 <li.ma@amd.com> Signed-off-by:
-
shaoyunl authored
From MES version 0x54, the log entry increased and require the log buffer size to be increased. The 16k is maximum size agreed Signed-off-by:
shaoyunl <shaoyun.liu@amd.com> Acked-by:
-
Alex Deucher authored
Covers GPU page fault debugging and adds a reference to umr. v2: update client ids to include SQC/G v3: Remove duplicate text v4: add umr documentation link, fix typo Reviewed-by:
Feifei Xu <Feifei.Xu@amd.com> Signed-off-by:
-
shaoyunl authored
The MES log might slow down the performance for extra step of log the data, disable it by default and introduce a parameter can enable it when necessary Signed-off-by:
-
Tim Huang authored
While doing multiple S4 stress tests, GC/RLC/PMFW get into an invalid state resulting into hard hangs. Adding a GFX reset as workaround just before sending the MP1_UNLOAD message avoids this failure. Signed-off-by:
Tim Huang <Tim.Huang@amd.com> Acked-by:
-
Yang Wang authored
refine function signature of amdgpu_aca_get_error_data(); Signed-off-by:
Yang Wang <kevinyang.wang@amd.com> Reviewed-by:
-
Li Ma authored
There is a new DCN veriosn 3.5.1 need to load Signed-off-by:
-
Lijo Lazar authored
For SOC21 ASICs, there is an issue in re-enabling PM features if a suspend got aborted. In such cases, reset the device during resume phase. This is a workaround till a proper solution is finalized. Signed-off-by:
Lijo Lazar <lijo.lazar@amd.com> Reviewed-by:
-
Sunil Khatri authored
Add FW information of all the IP's in the devcoredump. Signed-off-by:
Sunil Khatri <sunil.khatri@amd.com> Reviewed-by:
-
Lang Yu authored
Otherwise the old one will be used during GPU reset. That's not expected. Signed-off-by:
Lang Yu <Lang.Yu@amd.com> Reviewed-by:
-
Lijo Lazar authored
Downgrade to debug information when IBs are skipped. Also, use dev_* to identify the device. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Asad Kamal <asad.kamal@amd.com> Signed-off-by:
-
Yang Wang authored
v1: add a new enumeration type to identify device attribute node, this method is relatively more efficient compared with 'strcmp' in update_attr() function. v2: rename device_attr_type to device_attr_id. Signed-off-by:
Ma Jun <majun@amd.com> Reviewed-by:
-
- 27 Mar, 2024 11 commits
-
-
Alex Deucher authored
There are cases where soft reset seems to succeed, but does not, so always use mode1/2 for now. Reviewed-by:
Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by:
-
Harish Kasiviswanathan authored
Currently, with F32 HWS GPU reset is only when unmap queue fails. However, if compute queue doesn't repond to preemption request in time unmap will return without any error. In this case, only preemption error is logged and Reset is not triggered. Call GPU reset in this case also. Reviewed-by:
Mukul Joshi <mukul.joshi@amd.com> Signed-off-by:
-
Johannes Weiner authored
An errant disk backup on my desktop got into debugfs and triggered the following deadlock scenario in the amdgpu debugfs files. The machine also hard-resets immediately after those lines are printed (although I wasn't able to reproduce that part when reading by hand): [ 1318.016074][ T1082] ====================================================== [ 1318.016607][ T1082] WARNING: possible circular locking dependency detected [ 1318.017107][ T1082] 6.8.0-rc7-00015-ge0c8221b72c0 #17 Not tainted [ 1318.017598][ T1082] ------------------------------------------------------ [ 1318.018096][ T1082] tar/1082 is trying to acquire lock: [ 1318.018585][ T1082] ffff98c44175d6a0 (&mm->mmap_lock){++++}-{3:3}, at: __might_fault+0x40/0x80 [ 1318.019084][ T1082] [ 1318.019084][ T1082] but task is already holding lock: [ 1318.020052][ T1082] ffff98c4c13f55f8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: amdgpu_debugfs_mqd_read+0x6a/0x250 [amdgpu] [ 1318.020607][ T1082] [ 1318.020607][ T1082] which lock already depends on the new lock. [ 1318.020607][ T1082] [ 1318.022081][ T1082] [ 1318.022081][ T1082] the existing dependency chain (in reverse order) is: [ 1318.023083][ T1082] [ 1318.023083][ T1082] -> #2 (reservation_ww_class_mutex){+.+.}-{3:3}: [ 1318.024114][ T1082] __ww_mutex_lock.constprop.0+0xe0/0x12f0 [ 1318.024639][ T1082] ww_mutex_lock+0x32/0x90 [ 1318.025161][ T1082] dma_resv_lockdep+0x18a/0x330 [ 1318.025683][ T1082] do_one_initcall+0x6a/0x350 [ 1318.026210][ T1082] kernel_init_freeable+0x1a3/0x310 [ 1318.026728][ T1082] kernel_init+0x15/0x1a0 [ 1318.027242][ T1082] ret_from_fork+0x2c/0x40 [ 1318.027759][ T1082] ret_from_fork_asm+0x11/0x20 [ 1318.028281][ T1082] [ 1318.028281][ T1082] -> #1 (reservation_ww_class_acquire){+.+.}-{0:0}: [ 1318.029297][ T1082] dma_resv_lockdep+0x16c/0x330 [ 1318.029790][ T1082] do_one_initcall+0x6a/0x350 [ 1318.030263][ T1082] kernel_init_freeable+0x1a3/0x310 [ 1318.030722][ T1082] kernel_init+0x15/0x1a0 [ 1318.031168][ T1082] ret_from_fork+0x2c/0x40 [ 1318.031598][ T1082] ret_from_fork_asm+0x11/0x20 [ 1318.032011][ T1082] [ 1318.032011][ T1082] -> #0 (&mm->mmap_lock){++++}-{3:3}: [ 1318.032778][ T1082] __lock_acquire+0x14bf/0x2680 [ 1318.033141][ T1082] lock_acquire+0xcd/0x2c0 [ 1318.033487][ T1082] __might_fault+0x58/0x80 [ 1318.033814][ T1082] amdgpu_debugfs_mqd_read+0x103/0x250 [amdgpu] [ 1318.034181][ T1082] full_proxy_read+0x55/0x80 [ 1318.034487][ T1082] vfs_read+0xa7/0x360 [ 1318.034788][ T1082] ksys_read+0x70/0xf0 [ 1318.035085][ T1082] do_syscall_64+0x94/0x180 [ 1318.035375][ T1082] entry_SYSCALL_64_after_hwframe+0x46/0x4e [ 1318.035664][ T1082] [ 1318.035664][ T1082] other info that might help us debug this: [ 1318.035664][ T1082] [ 1318.036487][ T1082] Chain exists of: [ 1318.036487][ T1082] &mm->mmap_lock --> reservation_ww_class_acquire --> reservation_ww_class_mutex [ 1318.036487][ T1082] [ 1318.037310][ T1082] Possible unsafe locking scenario: [ 1318.037310][ T1082] [ 1318.037838][ T1082] CPU0 CPU1 [ 1318.038101][ T1082] ---- ---- [ 1318.038350][ T1082] lock(reservation_ww_class_mutex); [ 1318.038590][ T1082] lock(reservation_ww_class_acquire); [ 1318.038839][ T1082] lock(reservation_ww_class_mutex); [ 1318.039083][ T1082] rlock(&mm->mmap_lock); [ 1318.039328][ T1082] [ 1318.039328][ T1082] *** DEADLOCK *** [ 1318.039328][ T1082] [ 1318.040029][ T1082] 1 lock held by tar/1082: [ 1318.040259][ T1082] #0: ffff98c4c13f55f8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: amdgpu_debugfs_mqd_read+0x6a/0x250 [amdgpu] [ 1318.040560][ T1082] [ 1318.040560][ T1082] stack backtrace: [ 1318.041053][ T1082] CPU: 22 PID: 1082 Comm: tar Not tainted 6.8.0-rc7-00015-ge0c8221b72c0 #17 3316c85d50e282c5643b075d1f01a4f6365e39c2 [ 1318.041329][ T1082] Hardware name: Gigabyte Technology Co., Ltd. B650 AORUS PRO AX/B650 AORUS PRO AX, BIOS F20 12/14/2023 [ 1318.041614][ T1082] Call Trace: [ 1318.041895][ T1082] <TASK> [ 1318.042175][ T1082] dump_stack_lvl+0x4a/0x80 [ 1318.042460][ T1082] check_noncircular+0x145/0x160 [ 1318.042743][ T1082] __lock_acquire+0x14bf/0x2680 [ 1318.043022][ T1082] lock_acquire+0xcd/0x2c0 [ 1318.043301][ T1082] ? __might_fault+0x40/0x80 [ 1318.043580][ T1082] ? __might_fault+0x40/0x80 [ 1318.043856][ T1082] __might_fault+0x58/0x80 [ 1318.044131][ T1082] ? __might_fault+0x40/0x80 [ 1318.044408][ T1082] amdgpu_debugfs_mqd_read+0x103/0x250 [amdgpu 8fe2afaa910cbd7654c8cab23563a94d6caebaab] [ 1318.044749][ T1082] full_proxy_read+0x55/0x80 [ 1318.045042][ T1082] vfs_read+0xa7/0x360 [ 1318.045333][ T1082] ksys_read+0x70/0xf0 [ 1318.045623][ T1082] do_syscall_64+0x94/0x180 [ 1318.045913][ T1082] ? do_syscall_64+0xa0/0x180 [ 1318.046201][ T1082] ? lockdep_hardirqs_on+0x7d/0x100 [ 1318.046487][ T1082] ? do_syscall_64+0xa0/0x180 [ 1318.046773][ T1082] ? do_syscall_64+0xa0/0x180 [ 1318.047057][ T1082] ? do_syscall_64+0xa0/0x180 [ 1318.047337][ T1082] ? do_syscall_64+0xa0/0x180 [ 1318.047611][ T1082] entry_SYSCALL_64_after_hwframe+0x46/0x4e [ 1318.047887][ T1082] RIP: 0033:0x7f480b70a39d [ 1318.048162][ T1082] Code: 91 ba 0d 00 f7 d8 64 89 02 b8 ff ff ff ff eb b2 e8 18 a3 01 00 0f 1f 84 00 00 00 00 00 80 3d a9 3c 0e 00 00 74 17 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 5b c3 66 2e 0f 1f 84 00 00 00 00 00 53 48 83 [ 1318.048769][ T1082] RSP: 002b:00007ffde77f5c68 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 1318.049083][ T1082] RAX: ffffffffffffffda RBX: 0000000000000800 RCX: 00007f480b70a39d [ 1318.049392][ T1082] RDX: 0000000000000800 RSI: 000055c9f2120c00 RDI: 0000000000000008 [ 1318.049703][ T1082] RBP: 0000000000000800 R08: 000055c9f2120a94 R09: 0000000000000007 [ 1318.050011][ T1082] R10: 0000000000000000 R11: 0000000000000246 R12: 000055c9f2120c00 [ 1318.050324][ T1082] R13: 0000000000000008 R14: 0000000000000008 R15: 0000000000000800 [ 1318.050638][ T1082] </TASK> amdgpu_debugfs_mqd_read() holds a reservation when it calls put_user(), which may fault and acquire the mmap_sem. This violates the established locking order. Bounce the mqd data through a kernel buffer to get put_user() out of the illegal section. Fixes: 445d85e3 ("drm/amdgpu: add debugfs interface for reading MQDs") Cc: stable@vger.kernel.org # v6.5+ Reviewed-by:Shashank Sharma <shashank.sharma@amd.com> Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
-
Lang Yu authored
Share same codes with 4.0.5 and enable collaborate mode for VPE. Signed-off-by:
Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com> Acked-by:
-
Lang Yu authored
Align with FW changes. Signed-off-by:
-
Xi Liu authored
[WHY & HOW] DCN351 and DCN35 should use the same bounding box and IP settings. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by:
Jun Lei <jun.lei@amd.com> Acked-by:
Alex Hung <alex.hung@amd.com> Signed-off-by:
Xi Liu <xi.liu@amd.com> Tested-by:
-
Aric Cyr authored
This version brings along following fixes: - Fix some bound and NULL check - Fix nonseamless transition from ODM + MPO to ODM + subvp - Allow Z8 when stutter threshold is not met - Remove plane and stream pointers from dc scratch - Remove read/write to external register - Increase number of hpo dp link encoders - Increase clock table size - Add new IPS config mode - Build scaling params when a new plane is appended - Refactor DML2 interfaces - Allow idle opts for no flip case on PSR panel Acked-by:
Tom Chung <chiahsuan.chung@amd.com> Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Tested-by:
-
Muhammad Ahmed authored
[why] Driver crashes when pipe idx not set properly [how] Add code to skip the pipe that idx not set properly Reviewed-by:
Muhammad Ahmed <ahmed.ahmed@amd.com> Tested-by:
-
Anthony Koo authored
- Add Display PHY FSM command interface for automated testing Acked-by:
-
Dillon Varone authored
[WHY&HOW] Converting the watermark set structure to a union and modifying some interfaces to accommodate future usage. Reviewed-by:
Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by:
-
Alvin Lee authored
[Why&How] Remove several plane and stream pointers from dc for code refactoring. Reviewed-by:
-
