- 09 Feb, 2017 40 commits
-
-
Thomas Gleixner authored
commit 1aa6cfd3 upstream. The recent conversion to the hotplug state machine kept two mechanisms from the original code: 1) The first_init logic which adds the number of online CPUs in a package to the refcount. That's wrong because the callbacks are executed for all online CPUs. Remove it so the refcounting is correct. 2) The on_each_cpu() call to undo box->init() in the error handling path. That's bogus because when the prepare callback fails no box has been initialized yet. Remove it. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Siewior <bigeasy@linutronix.de> Cc: Stephane Eranian <eranian@google.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Yasuaki Ishimatsu <yasu.isimatu@gmail.com> Fixes: 1a246b9f ("perf/x86/intel/uncore: Convert to hotplug state machine") Link: http://lkml.kernel.org/r/20170131230141.298032324@linutronix.deSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jason Gerecke authored
commit 282e4637 upstream. Commit 025bcc15 performed cleanup work on the 'wacom_pl_irq' function, making it follow the standards used in the rest of the codebase. The change unintiontionally allowed the function to send input events from reports that are not marked as being in prox. This can cause problems as the report values for X, Y, etc. are not guaranteed to be correct. In particular, occasionally the tablet will send a report with these values set to zero. If such a report is received it can caus an unexpected jump in the XY position. This patch surrounds more of the processing code with a proximity check, preventing these zeroed reports from overwriting the current state. To be safe, only the tool type and ABS_MISC events should be reported when the pen is marked as being out of prox. Fixes: 025bcc15 ("HID: wacom: Simplify 'wacom_pl_irq'") Signed-off-by:
Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by:
Ping Cheng <pingc@wacom.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Ardinartsev Nikita authored
commit 877a021e upstream. With NOGET quirk Logitech F510 is now fully workable in dinput mode including rumble effects (according to fftest). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=117091 [jkosina@suse.cz: fix patch format] Signed-off-by:
Ardinartsev Nikita <ardinar23@gmail.com> Acked-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
-
Colin Ian King authored
commit ed9ab428 upstream. Quirking the following AMI USB device with ALWAYS_POLL fixes an AMI virtual keyboard and mouse from not responding and timing out when it is attached to a ppc64el Power 8 system and when we have some rapid open/closes on the mouse device. usb 1-3: new high-speed USB device number 2 using xhci_hcd usb 1-3: New USB device found, idVendor=046b, idProduct=ff01 usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-3: Product: Virtual Hub usb 1-3: Manufacturer: American Megatrends Inc. usb 1-3: SerialNumber: serial usb 1-3.3: new high-speed USB device number 3 using xhci_hcd usb 1-3.3: New USB device found, idVendor=046b, idProduct=ff31 usb 1-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-3.3: Product: Virtual HardDisk Device usb 1-3.3: Manufacturer: American Megatrends Inc. usb 1-3.4: new low-speed USB device number 4 using xhci_hcd usb 1-3.4: New USB device found, idVendor=046b, idProduct=ff10 usb 1-3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-3.4: Product: Virtual Keyboard and Mouse usb 1-3.4: Manufacturer: American Megatrends Inc. With the quirk I have not been able to trigger the issue with half an hour of saturation soak testing. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Johannes Berg authored
commit 03c902bf upstream. When the firmware restarts in a situation in which any station has no queue reserved anymore because that queue was used, the code will crash trying to access the queue_info array at the offset 255, which is far too big. Fix this by checking that a queue is actually reserved before writing its status. Fixes: 8d98ae6e ("iwlwifi: mvm: re-assign old queues after hw restart in dqa mode") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Jürg Billeter authored
commit 7941c59e upstream. Mistakenly, the driver is trying to load the 8000C firmware with an incorrect name (i.e. with two hyphens where there should be only one) and that fails. Fix that by removing the hyphen from the format macro. Fixes: e1ba684f ("iwlwifi: 8000: fix MODULE_FIRMWARE input") Signed-off-by:
Jürg Billeter <j@bitron.ch> Signed-off-by:
-
Andy Shevchenko authored
commit 19b26d92 upstream. Not every pin can be configured. Add missed check to prevent access violation. Fixes: 4e80c8f5 ("pinctrl: intel: Add Intel Merrifield pin controller support") Acked-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Andy Shevchenko authored
commit 1b89970d upstream. Debounce value is set globally per community. Otherwise user will easily get a kernel crash when they start using the feature: BUG: unable to handle kernel paging request at ffffc900003be000 IP: byt_gpio_dbg_show+0xa9/0x430 Make it clear in byt_gpio_reg(). Note that this fix just prevents kernel to crash, but doesn't make any difference to the existing logic. It means the last caller will win the trade and debounce value will be configured accordingly. The actual logic fix needs to be thought about and it's not as important as crash fix. That's why the latter goes separately and right now. Fixes: 658b476c ("pinctrl: baytrail: Add debounce configuration") Cc: Cristina Ciocan <cristina.ciocan@intel.com> Signed-off-by:
Jean Delvare <jdelvare@suse.de> Acked-by:
-
Michael S. Tsirkin authored
commit 0d5415b4 upstream. This reverts commit c7070619. This has been shown to regress on some ARM systems: by forcing on DMA API usage for ARM systems, we have inadvertently kicked open a hornets' nest in terms of cache-coherency. Namely that unless the virtio device is explicitly described as capable of coherent DMA by firmware, the DMA APIs on ARM and other DT-based platforms will assume it is non-coherent. This turns out to cause a big problem for the likes of QEMU and kvmtool, which generate virtio-mmio devices in their guest DTs but neglect to add the often-overlooked "dma-coherent" property; as a result, we end up with the guest making non-cacheable accesses to the vring, the host doing so cacheably, both talking past each other and things going horribly wrong. We are working on a safer work-around. Fixes: c7070619 ("vring: Force use of DMA API for ARM-based systems with legacy devices") Reported-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Rafał Miłecki authored
commit 7195439d upstream. This reverts commit 4c81acab ("bcma: init serial console directly from ChipCommon code") as it broke IRQ assignment. Getting IRQ with bcma_core_irq helper on SoC requires MIPS core to be set. It happens *after* ChipCommon initialization so we can't do this so early. This fixes a user reported regression. It wasn't critical as serial was still somehow working but lack of IRQs was making in unreliable. Fixes: 4c81acab ("bcma: init serial console directly from ChipCommon code") Reported-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Douglas Miller authored
commit 966d2b04 upstream. percpu_ref_tryget() and percpu_ref_tryget_live() should return "true" IFF they acquire a reference. But the return value from atomic_long_inc_not_zero() is a long and may have high bits set, e.g. PERCPU_COUNT_BIAS, and the return value of the tryget routines is bool so the reference may actually be acquired but the routines return "false" which results in a reference leak since the caller assumes it does not need to do a corresponding percpu_ref_put(). This was seen when performing CPU hotplug during I/O, as hangs in blk_mq_freeze_queue_wait where percpu_ref_kill (blk_mq_freeze_queue_start) raced with percpu_ref_tryget (blk_mq_timeout_work). Sample stack trace: __switch_to+0x2c0/0x450 __schedule+0x2f8/0x970 schedule+0x48/0xc0 blk_mq_freeze_queue_wait+0x94/0x120 blk_mq_queue_reinit_work+0xb8/0x180 blk_mq_queue_reinit_prepare+0x84/0xa0 cpuhp_invoke_callback+0x17c/0x600 cpuhp_up_callbacks+0x58/0x150 _cpu_up+0xf0/0x1c0 do_cpu_up+0x120/0x150 cpu_subsys_online+0x64/0xe0 device_online+0xb4/0x120 online_store+0xb4/0xc0 dev_attr_store+0x68/0xa0 sysfs_kf_write+0x80/0xb0 kernfs_fop_write+0x17c/0x250 __vfs_write+0x6c/0x1e0 vfs_write+0xd0/0x270 SyS_write+0x6c/0x110 system_call+0x38/0xe0 Examination of the queue showed a single reference (no PERCPU_COUNT_BIAS, and __PERCPU_REF_DEAD, __PERCPU_REF_ATOMIC set) and no requests. However, conditions at the time of the race are count of PERCPU_COUNT_BIAS + 0 and __PERCPU_REF_DEAD and __PERCPU_REF_ATOMIC set. The fix is to make the tryget routines use an actual boolean internally instead of the atomic long result truncated to a int. Fixes: e625305b percpu-refcount: make percpu_ref based on longs instead of ints Link: https://bugzilla.kernel.org/show_bug.cgi?id=190751Signed-off-by:
Douglas Miller <dougmill@linux.vnet.ibm.com> Reviewed-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Fixes: e625305b ("percpu-refcount: make percpu_ref based on longs instead of ints") Signed-off-by:
-
Rask Ingemann Lambertsen authored
commit d0e287a4 upstream. A typo or copy-paste bug means that the register access intended for regulator dcdce goes to dcdcb instead. This patch corrects it. Fixes: 2ca342d3 (regulator: axp20x: Support AXP806 variant) Signed-off-by:
Rask Ingemann Lambertsen <rask@formelder.dk> Acked-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Halil Pasic authored
commit cda8bba0 upstream. Currently, under certain circumstances vhost_init_is_le does just a part of the initialization job, and depends on vhost_reset_is_le being called too. For this reason vhost_vq_init_access used to call vhost_reset_is_le when vq->private_data is NULL. This is not only counter intuitive, but also real a problem because it breaks vhost_net. The bug was introduced to vhost_net with commit 2751c988 ("vhost: cross-endian support for legacy devices"). The symptom is corruption of the vq's used.idx field (virtio) after VHOST_NET_SET_BACKEND was issued as a part of the vhost shutdown on a vq with pending descriptors. Let us make sure the outcome of vhost_init_is_le never depend on the state it is actually supposed to initialize, and fix virtio_net by removing the reset from vhost_vq_init_access. With the above, there is no reason for vhost_reset_is_le to do just half of the job. Let us make vhost_reset_is_le reinitialize is_le. Signed-off-by:
Halil Pasic <pasic@linux.vnet.ibm.com> Reported-by:
Michael A. Tebolt <miket@us.ibm.com> Reported-by:
Dr. David Alan Gilbert <dgilbert@redhat.com> Fixes: commit 2751c988 ("vhost: cross-endian support for legacy devices") Signed-off-by:
Greg Kurz <groug@kaod.org> Tested-by:
-
Gabriel Krisman Bertazi authored
commit 161e6d44 upstream. One of our kernelCI boxes hanged at boot because a faulty eSDHC device was triggering spurious CARD_INT interrupts for SD cards, causing CMD52 reads, which are not allowed for SD devices. This adds a sanity check to the interruption path, preventing that illegal command from getting sent if the CARD_INT interruption should be disabled. This quirk allows that particular machine to resume boot despite the faulty hardware, instead of getting hung dealing with thousands of mishandled interrupts. Suggested-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
Gabriel Krisman Bertazi <krisman@collabora.co.uk> Acked-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Tejun Heo authored
commit 07cd1294 upstream. While refactoring cgroup creation, a5bca215 ("cgroup: factor out cgroup_create() out of cgroup_mkdir()") incorrectly onlined subsystems before the new cgroup is associated with it kernfs_node. This is fine for cgroup proper but cgroup_name/path() depend on the associated kernfs_node and if a subsystem makes the new cgroup_subsys_state visible, which they're allowed to after onlining, it can lead to NULL dereference. The current code performs cgroup creation and subsystem onlining in cgroup_create() and cgroup_mkdir() makes the cgroup and subsystems visible afterwards. There's no reason to online the subsystems early and we can simply drop cgroup_apply_control_enable() call from cgroup_create() so that the subsystems are onlined and made visible at the same time. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Fixes: a5bca215 ("cgroup: factor out cgroup_create() out of cgroup_mkdir()") Signed-off-by:
-
Oliver Hartkopp authored
commit a06393ed upstream. When removing a bcm tx operation either a hrtimer or a tasklet might run. As the hrtimer triggers its associated tasklet and vice versa we need to take care to mutually terminate both handlers. Reported-by:
Michael Josenhans <michael.josenhans@web.de> Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Tested-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 79c6f448 upstream. The hwlat tracer creates a kernel thread at start of the tracer. It is pinned to a single CPU and will move to the next CPU after each period of running. If the user modifies the migration thread's affinity, it will not change after that happens. The original code created the thread at the first instance it was called, but later was changed to destroy the thread after the tracer was finished, and would not be created until the next instance of the tracer was established. The code that initialized the affinity was only called on the initial instantiation of the tracer. After that, it was not initialized, and the previous affinity did not match the current newly created one, making it appear that the user modified the thread's affinity when it did not, and the thread failed to migrate again. Fixes: 0330f7aa ("tracing: Have hwlat trace migrate across tracing_cpumask CPUs") Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Michal Hocko authored
commit 5abf186a upstream. do_generic_file_read() can be told to perform a large request from userspace. If the system is under OOM and the reading task is the OOM victim then it has an access to memory reserves and finishing the full request can lead to the full memory depletion which is dangerous. Make sure we rather go with a short read and allow the killed task to terminate. Link: http://lkml.kernel.org/r/20170201092706.9966-3-mhocko@kernel.orgSigned-off-by:
Michal Hocko <mhocko@suse.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Toshi Kani authored
commit a96dfddb upstream. Reading a sysfs "memoryN/valid_zones" file leads to the following oops when the first page of a range is not backed by struct page. show_valid_zones() assumes that 'start_pfn' is always valid for page_zone(). BUG: unable to handle kernel paging request at ffffea017a000000 IP: show_valid_zones+0x6f/0x160 This issue may happen on x86-64 systems with 64GiB or more memory since their memory block size is bumped up to 2GiB. [1] An example of such systems is desribed below. 0x3240000000 is only aligned by 1GiB and this memory block starts from 0x3200000000, which is not backed by struct page. BIOS-e820: [mem 0x0000003240000000-0x000000603fffffff] usable Since test_pages_in_a_zone() already checks holes, fix this issue by extending this function to return 'valid_start' and 'valid_end' for a given range. show_valid_zones() then proceeds with the valid range. [1] 'Commit bdee237c ("x86: mm: Use 2GB memory block size on large-memory x86-64 systems")' Link: http://lkml.kernel.org/r/20170127222149.30893-3-toshi.kani@hpe.comSigned-off-by:
Toshi Kani <toshi.kani@hpe.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Zhang Zhen <zhenzhang.zhang@huawei.com> Cc: Reza Arbab <arbab@linux.vnet.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Toshi Kani authored
commit deb88a2a upstream. Patch series "fix a kernel oops when reading sysfs valid_zones", v2. A sysfs memory file is created for each 2GiB memory block on x86-64 when the system has 64GiB or more memory. [1] When the start address of a memory block is not backed by struct page, i.e. a memory range is not aligned by 2GiB, reading its 'valid_zones' attribute file leads to a kernel oops. This issue was observed on multiple x86-64 systems with more than 64GiB of memory. This patch-set fixes this issue. Patch 1 first fixes an issue in test_pages_in_a_zone(), which does not test the start section. Patch 2 then fixes the kernel oops by extending test_pages_in_a_zone() to return valid [start, end). Note for stable kernels: The memory block size change was made by commit bdee237c ("x86: mm: Use 2GB memory block size on large-memory x86-64 systems"), which was accepted to 3.9. However, this patch-set depends on (and fixes) the change to test_pages_in_a_zone() made by commit 5f0f2887 ("mm/memory_hotplug.c: check for missing sections in test_pages_in_a_zone()"), which was accepted to 4.4. So, I recommend that we backport it up to 4.4. [1] 'Commit bdee237c ("x86: mm: Use 2GB memory block size on large-memory x86-64 systems")' This patch (of 2): test_pages_in_a_zone() does not check 'start_pfn' when it is aligned by section since 'sec_end_pfn' is set equal to 'pfn'. Since this function is called for testing the range of a sysfs memory file, 'start_pfn' is always aligned by section. Fix it by properly setting 'sec_end_pfn' to the next section pfn. Also make sure that this function returns 1 only when the range belongs to a zone. Link: http://lkml.kernel.org/r/20170127222149.30893-2-toshi.kani@hpe.comSigned-off-by:
-
Rabin Vincent authored
commit 81ddd8c0 upstream. Reviewed-by:
Jeff Layton <jlayton@redhat.com> file_info_lock is not initalized in initiate_cifs_search(), leading to the following splat after a simple "mount.cifs ... dir && ls dir/": BUG: spinlock bad magic on CPU#0, ls/486 lock: 0xffff880009301110, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0 CPU: 0 PID: 486 Comm: ls Not tainted 4.9.0 #27 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ffffc900042f3db0 ffffffff81327533 0000000000000000 ffff880009301110 ffffc900042f3dd0 ffffffff810baf75 ffff880009301110 ffffffff817ae077 ffffc900042f3df0 ffffffff810baff6 ffff880009301110 ffff880008d69900 Call Trace: [<ffffffff81327533>] dump_stack+0x65/0x92 [<ffffffff810baf75>] spin_dump+0x85/0xe0 [<ffffffff810baff6>] spin_bug+0x26/0x30 [<ffffffff810bb159>] do_raw_spin_lock+0xe9/0x130 [<ffffffff8159ad2f>] _raw_spin_lock+0x1f/0x30 [<ffffffff8127e50d>] cifs_closedir+0x4d/0x100 [<ffffffff81181cfd>] __fput+0x5d/0x160 [<ffffffff81181e3e>] ____fput+0xe/0x10 [<ffffffff8109410e>] task_work_run+0x7e/0xa0 [<ffffffff81002512>] exit_to_usermode_loop+0x92/0xa0 [<ffffffff810026f9>] syscall_return_slowpath+0x49/0x50 [<ffffffff8159b484>] entry_SYSCALL_64_fastpath+0xa7/0xa9 Fixes: 3afca265 ("Clarify locking of cifs file and tcon structures and make more granular") Signed-off-by:
Rabin Vincent <rabinv@axis.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Dan Streetman authored
commit d7b028f5 upstream. Add zswap_init_failed bool that prevents changing any of the module params, if init_zswap() fails, and set zswap_enabled to false. Change 'enabled' param to a callback, and check zswap_init_failed before allowing any change to 'enabled', 'zpool', or 'compressor' params. Any driver that is built-in to the kernel will not be unloaded if its init function returns error, and its module params remain accessible for users to change via sysfs. Since zswap uses param callbacks, which assume that zswap has been initialized, changing the zswap params after a failed initialization will result in WARNING due to the param callbacks expecting a pool to already exist. This prevents that by immediately exiting any of the param callbacks if initialization failed. This was reported here: https://marc.info/?l=linux-mm&m=147004228125528&w=4 And fixes this WARNING: [ 429.723476] WARNING: CPU: 0 PID: 5140 at mm/zswap.c:503 __zswap_pool_current+0x56/0x60 The warning is just noise, and not serious. However, when init fails, zswap frees all its percpu dstmem pages and its kmem cache. The kmem cache might be serious, if kmem_cache_alloc(NULL, gfp) has problems; but the percpu dstmem pages are definitely a problem, as they're used as temporary buffer for compressed pages before copying into place in the zpool. If the user does get zswap enabled after an init failure, then zswap will likely Oops on the first page it tries to compress (or worse, start corrupting memory). Fixes: 90b0fc26 ("zswap: change zpool/compressor at runtime") Link: http://lkml.kernel.org/r/20170124200259.16191-2-ddstreet@ieee.orgSigned-off-by:
Dan Streetman <dan.streetman@canonical.com> Reported-by:
Marcin Miroslaw <marcin@mejor.pl> Cc: Seth Jennings <sjenning@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by:
-
J. Bruce Fields authored
commit 034dd34f upstream. Olga Kornievskaia says: "I ran into this oops in the nfsd (below) (4.10-rc3 kernel). To trigger this I had a client (unsuccessfully) try to mount the server with krb5 where the server doesn't have the rpcsec_gss_krb5 module built." The problem is that rsci.cred is copied from a svc_cred structure that gss_proxy didn't properly initialize. Fix that. [120408.542387] general protection fault: 0000 [#1] SMP ... [120408.565724] CPU: 0 PID: 3601 Comm: nfsd Not tainted 4.10.0-rc3+ #16 [120408.567037] Hardware name: VMware, Inc. VMware Virtual = Platform/440BX Desktop Reference Platform, BIOS 6.00 07/02/2015 [120408.569225] task: ffff8800776f95c0 task.stack: ffffc90003d58000 [120408.570483] RIP: 0010:gss_mech_put+0xb/0x20 [auth_rpcgss] ... [120408.584946] ? rsc_free+0x55/0x90 [auth_rpcgss] [120408.585901] gss_proxy_save_rsc+0xb2/0x2a0 [auth_rpcgss] [120408.587017] svcauth_gss_proxy_init+0x3cc/0x520 [auth_rpcgss] [120408.588257] ? __enqueue_entity+0x6c/0x70 [120408.589101] svcauth_gss_accept+0x391/0xb90 [auth_rpcgss] [120408.590212] ? try_to_wake_up+0x4a/0x360 [120408.591036] ? wake_up_process+0x15/0x20 [120408.592093] ? svc_xprt_do_enqueue+0x12e/0x2d0 [sunrpc] [120408.593177] svc_authenticate+0xe1/0x100 [sunrpc] [120408.594168] svc_process_common+0x203/0x710 [sunrpc] [120408.595220] svc_process+0x105/0x1c0 [sunrpc] [120408.596278] nfsd+0xe9/0x160 [nfsd] [120408.597060] kthread+0x101/0x140 [120408.597734] ? nfsd_destroy+0x60/0x60 [nfsd] [120408.598626] ? kthread_park+0x90/0x90 [120408.599448] ret_from_fork+0x22/0x30 Fixes: 1d658336 "SUNRPC: Add RPC based upcall mechanism for RPCGSS auth" Cc: Simo Sorce <simo@redhat.com> Reported-by:
Olga Kornievskaia <kolga@netapp.com> Tested-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Kinglong Mee authored
commit d19fb70d upstream. nfsd assigns the nfs4_free_lock_stateid to .sc_free in init_lock_stateid(). If nfsd doesn't go through init_lock_stateid() and put stateid at end, there is a NULL reference to .sc_free when calling nfs4_put_stid(ns). This patch let the nfs4_stid.sc_free assignment to nfs4_alloc_stid(). Fixes: 356a95ec "nfsd: clean up races in lock stateid searching..." Signed-off-by:
Kinglong Mee <kinglongmee@gmail.com> Reviewed-by:
-
Reza Arbab authored
commit a0615a16 upstream. When setting a 2MB pte, radix__map_kernel_page() is using the address ptep = (pte_t *)pudp; Fix this conversion to use pmdp instead. Use pmdp_ptep() to do this instead of casting the pointer. Fixes: 2bfd65e4 ("powerpc/mm/radix: Add radix callbacks for early init routines") Reviewed-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Reza Arbab <arbab@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Michael Ellerman authored
commit b5fa0f7f upstream. Anton says: In commit 4db73271 ("powerpc: Add option to use jump label for cpu_has_feature()") and commit c12e6f24 ("powerpc: Add option to use jump label for mmu_has_feature()") we added: BUILD_BUG_ON(!__builtin_constant_p(feature)) to cpu_has_feature() and mmu_has_feature() in order to catch usage issues (such as cpu_has_feature(cpu_has_feature(X), which has happened once in the past). Unfortunately LLVM isn't smart enough to resolve this, and it errors out. I work around it in my clang/LLVM builds of the kernel, but I have just discovered that it causes a lot of issues for the bcc (eBPF) trace tool (which uses LLVM). For now just #ifdef it away for clang builds. Fixes: 4db73271 ("powerpc: Add option to use jump label for cpu_has_feature()") Fixes: c12e6f24 ("powerpc: Add option to use jump label for mmu_has_feature()") Reported-by:
Anton Blanchard <anton@samba.org> Tested-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by:
-
Darren Stevens authored
commit af2b7fa1 upstream. prom_init.c calls 'instance-to-package' twice, but the return is not checked during prom_find_boot_cpu(). The result is then passed to prom_getprop(), which could be PROM_ERROR. Add a return check to prevent this. This was found on a pasemi system, where CFE doesn't have a working 'instance-to package' prom call. Before Commit 5c0484e2 ('powerpc: Endian safe trampoline') the area around addr 0 was mostly 0's and this doesn't cause a problem. Once the macro 'FIXUP_ENDIAN' has been added to head_64.S, the low memory area now has non-zero values, which cause the prom_getprop() call to hang. mpe: Also confirmed that under SLOF if 'instance-to-package' did fail with PROM_ERROR we would crash in SLOF. So the bug is not specific to CFE, it's just that other open firmwares don't trigger it because they have a working 'instance-to-package'. Fixes: 5c0484e2 ("powerpc: Endian safe trampoline") Signed-off-by:
Darren Stevens <darren@stevens-zone.net> Signed-off-by:
-
Gavin Shan authored
commit f05fea5b upstream. In __eeh_clear_pe_frozen_state(), we should pass the flag's value instead of its address to eeh_unfreeze_pe(). The isolated flag is cleared if no error returned from __eeh_clear_pe_frozen_state(). We never observed the error from the function. So the isolated flag should have been always cleared, no real issue is caused because of the misused @flag. This fixes the code by passing the value of @flag to eeh_unfreeze_pe(). Fixes: 5cfb20b9 ("powerpc/eeh: Emulate EEH recovery for VFIO devices") Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
-
Damien Le Moal authored
commit 2dae9955 upstream. For an ATA device supporting the sense data reporting feature set, a failed command will trigger the execution of ata_eh_request_sense if the result task file of the failed command has the ATA_SENSE bit set (sense data available bit). ata_eh_request_sense executes the REQUEST SENSE DATA EXT command to retrieve the sense data of the failed command. On success of REQUEST SENSE DATA EXT, the ATA_SENSE bit will NOT be set (the command succeeded) but ata_eh_request_sense nevertheless tests the availability of sense data by testing that bit presence in the result tf of the REQUEST SENSE DATA EXT command. This leads us to falsely assume that request sense data failed and to the warning message: atax.xx: request sense failed stat 50 emask 0 Upon success of REQUEST SENSE DATA EXT, set the ATA_SENSE bit in the result task file command so that sense data can be returned by ata_eh_request_sense. Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
-
Tejun Heo authored
commit e0edc8c5 upstream. Marko reports that CX1-JB512-HP shows the same timeout issues as CX1-JB256-HP. Let's apply MAX_SEC_128 to all devices in the series. Signed-off-by:
Marko Koski-Vähälä <marko@koski-vahala.com> Signed-off-by:
-
Arvind Yadav authored
commit 064c3db9 upstream. Here, If devm_ioremap will fail. It will return NULL. Then hpriv->base = NULL - 0x20000; Kernel can run into a NULL-pointer dereference. This error check will avoid NULL pointer dereference. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
-
Peter Zijlstra authored
commit 0b3589be upstream. Andres reported that MMAP2 records for anonymous memory always have their protection field 0. Turns out, someone daft put the prot/flags generation code in the file branch, leaving them unset for anonymous memory. Reported-by:
Andres Freund <andres@anarazel.de> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Don Zickus <dzickus@redhat.com Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@gmail.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@kernel.org Cc: anton@ozlabs.org Cc: namhyung@kernel.org Fixes: f972eb63 ("perf: Pass protection and flags bits through mmap2 interface") Link: http://lkml.kernel.org/r/20170126221508.GF6536@twins.programming.kicks-ass.netSigned-off-by:
-
Peter Zijlstra authored
commit a76a82a3 upstream. Dmitry reported a KASAN use-after-free on event->group_leader. It turns out there's a hole in perf_remove_from_context() due to event_function_call() not calling its function when the task associated with the event is already dead. In this case the event will have been detached from the task, but the grouping will have been retained, such that group operations might still work properly while there are live child events etc. This does however mean that we can miss a perf_group_detach() call when the group decomposes, this in turn can then lead to use-after-free. Fix it by explicitly doing the group detach if its still required. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Tested-by:
-
Ard Biesheuvel authored
commit 11e3b725 upstream. Update the ARMv8 Crypto Extensions and the plain NEON AES implementations in CBC and CTR modes to return the next IV back to the skcipher API client. This is necessary for chaining to work correctly. Note that for CTR, this is only done if the request is a round multiple of the block size, since otherwise, chaining is impossible anyway. Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Salvatore Benedetto authored
commit d6040764 upstream. Make sure CRYPTO_ALG_DEAD bit is cleared before proceeding with the algorithm registration. This fixes qat-dh registration when driver is restarted Signed-off-by:
Salvatore Benedetto <salvatore.benedetto@intel.com> Signed-off-by:
-
Ilia Mirkin authored
commit 24bf7ae3 upstream. Based on the xf86-video-nv code, NFORCE (NV1A) and NFORCE2 (NV1F) have a different way of retrieving clocks. See the nv_hw.c:nForceUpdateArbitrationSettings function in the original code for how these clocks were accessed. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54587Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Alastair Bridgewater authored
commit d347583a upstream. Store the ELD correctly, not just enough copies of the first byte to pad out the given ELD size. Signed-off-by:
Alastair Bridgewater <alastair.bridgewater@gmail.com> Fixes: 120b0c39 ("drm/nv50-/disp: audit and version SOR_HDA_ELD method") Reviewed-by:
-
Alex Deucher authored
commit 57bcd0a6 upstream. Missing check for crtcs present. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=193341 https://bugs.freedesktop.org/show_bug.cgi?id=99387Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alexander Stein authored
commit cdca06e4 upstream. According to VLI64 Intel Atom E3800 Specification Update (#329901) concurrent read accesses may result in returning 0xffffffff and write accesses may be dropped silently. To workaround all accesses must be protected by locks. Signed-off-by:
Alexander Stein <alexander.stein@systec-electronic.com> Acked-by:
-
Johan Hovold authored
commit 8e9faa15 upstream. In case of a zero-length report, the gpio direction_input callback would currently return success instead of an errno. Fixes: 1ffb3c40 ("HID: cp2112: make transfer buffers DMA capable") Signed-off-by:
Johan Hovold <johan@kernel.org> Reviewed-by:
-
