into kroah.com:/home/greg/linux/BK/usb-2.6

into home.osdl.org:/home/torvalds/v2.5/linux

into wopr.codemonkey.org.uk:/mnt/nfs/sepia/bar/src/kernel/2.6/trees/cpufreq

(Blah about unused variables).
This code still won't be used, as its still not tested/debugged properly
on a Nehemiah.

We got half multipliers horribly wrong, which made us think we could
clock the CPU much higher than we actually could.

Now that longhaul=1 matches more than 1 CPU, this broke.

These CPUs are actually only longhaul v1 compliant.
This was catastrophic, as the MSRs moved between v1 and v2.
There was also massive confusion in the documentation regarding Ezra.
It's not another variant, so 'v2' never existed.
Renamed v3 (Powersaver) to v2 as a result of this.

into home.osdl.org:/home/torvalds/v2.5/linux

This code is from ancient history when TCP did not used SKB cloning.

cause NULL pointer references in /proc.

Moreover, it's questionable whether the whole thing makes sense at all. 
Per-thread state is good.

Cset exclude: davem@nuts.ninka.net|ChangeSet|20031005193942|01097
Cset exclude: akpm@osdl.org[torvalds]|ChangeSet|20031005180420|42200
Cset exclude: akpm@osdl.org[torvalds]|ChangeSet|20031005180411|42211

Previously, one could configure a kernel that wouldn't link by doing a 'make
allnoconfig' and then a 'make menuconfig' and enabling CONFIG_EXPERIMENTAL,
CONFIG_PCI, CONFIG_USB_GADGET, and CONFIG_USB_ETH.

This usb driver needs ide_fix_driveid from drivers/ide/ide-ops.c, which
needs BLK_DEV_IDE ("Enhanced IDE/MFM/RLL disk/cdrom/tape/floppy
support") to get built.

Without this patch, you can configure an un-linkable kernel by doing make
allnoconfig, make menuconfig, and setting CONFIG_PCI, CONFIG_USB,
CONFIG_USB_STORAGE, and CONFIG_USB_STORAGE_ISD200 only.

I've got a new toy. This obviously correct 4 liner patches
the two files:

net/sunrpc/clnt.c does not compile if RPC_DEBUG is not enabled, due to
the fact that tk_pid is protected by RPC_DEBUG (which in turn depends on
CONFIG_SYSCTL).

The printk's that use it don't actually need to print it out at all,
the rpc_task tag isn't really interesting here.

Acked by Trond Myklebust.

The Zoran driver doesn't include <asm/io.h> and thus won't compile
on architectures where that doesn't get implicitly included through
some other path.

Add the proper includes.

This is the latest iteration of the workaround for the Athlon/Opteron
prefetch erratum.  Sometimes the CPU would incorrectly report an
exception on prefetch.

This supercedes the previous dumb workaround of checking for AMD CPUs in
prefetch().  That one bloated the kernel by several KB and lead to lots
of unnecessary checks in hot paths. 

Also this one handles user space faults too, so the kernel can
effectively isolte the user space from caring about this errata.

Instead it handles it in the slow path of the exception handler (the
check is only done when the kernel would normally trigger seg fault or
crash anyways)

All the serious criticisms to the previous patches have been addressed. 
It checks segment bases now, handles vm86 mode and avoids deadlocks when
the prefetch exception happened inside mmap_sem.

This includes review and fixes from Jamie Lokier and Andrew Morton.
Opcode decoder based on code from Richard Brunner.

This resolves a bug in osdl bugtraq (#1261) by making
some more driver names match their module names.  Such
mismatches are bad because scripts often need to add
special cases, handling multiple names for drivers.

usually this would be too trivial, but is so obviously stupid that
people might think that there's some hidden trick in there.

We should not check for NULL _after_ following a pointer.
Consider it a small tiny step towards cleaning up this code.

In drivers/usb/core/hcd-pci.c, the code forgets to set hcd->state to
USB_STATE_SUSPENDED on suspend.  The effect is that on resume, the
code refuses to wake the HCD up, and instead prints a message saying
the interface hasn't been suspended.

The patch below fixes this.  It is against 2.6.0-test6.  With this
patch I can suspend and resume my Apple PowerBook G4, and the USB
works after resuming.

Module names in Kconfig help texts should match those in Makefiles. Please apply.

This holds minor net2280 cleanups:

  - Cleaner handling for cases where dma_alloc_coherent() must be
    used instead of kmalloc().  (Kmalloc is more memory-efficient
    for the "small buffers" case.)   Both MIPS cases should work,
    as well as others.

  - Prefetch cachelines on PIO paths.

The first of those gets rid of one <linux/version.h> usage, no
longer useful now that 2.4 and 2.6 versions have forked.

This fixes some problems with timing calculations (primarily for ia64)
and adds an operation to send panic strings to the IPMI event log on a
panic.

Since 2.6.0-test6, ftape can't be configured as a built-in driver.
test6 changed ftape-init.c to call ftape_proc_destroy() also in
the non-MODULE case; however, ftape_proc_destroy() is only defined
when the driver is built as a module. The result is a linkage error.

This fixes this by deleting the #if MODULE around ftape_proc_destroy()'s
definition.

on lots of PCI-only setups that have no ISA anywhere.

 - add vbi device handling for dvb-c cards with analog module
 - fix error handling upon device initialization
 - fix DD1_INIT handling of DVB-C w/ analog module installed.  (Jon
   Burgess)

 - fixed some return values in device attach functions
 - allow private data to be associated with frontend devices here, too
 - misc bugfixes and performance improvements (endianess, function split up)

 - applied latest changes by Juergen Peitz (great work!)
  o as a workaround for the lockup problem the data valid signal is
    checked after every channel switch.  If it is not set FEC parameters
    are set again.
  o disabled autoprobing if FEC settings are known (from sp887x). 
  o added support for FE_READ_UNCORRECTED_BLOCKS (from sp887x).
  o added support for FE_SLEEP (from sp887x).
  o bit error rate is now not only read from register 0xC07 but also
    from 0xC08 (from sp887x). 
  o I2C feedthrough to the tuner is now only enabled when needed (from
    sp887x).
  o Added FE_CAN_QAM_AUTO and FE_CAN_HIERARCHY_AUTO to
    dvb_frontend_info.
  o Removed obsolete setting of default frontend parameters in
    sp8870_init.
  o Removed obsolete module parameter 'loadcode' because changes in the
    saa7146 driver made firmware loading very fast.

 - simplify and sanitize add/del handling for dvb net devices

 - allow private data to be associated with dvb frontend devices
   (Andreas Oberritter)
 - fixed fe_count countint in nxt6000 frontend driver (Andreas
   Oberritter)

 - add some debug and safety checks for video/vbi capture buffer
   handling
 - add new flag SAA7146_USE_PORT_B_FOR_VBI, so we can distinguish on
   which video port to apply the vbi workaround
 - add del_timer(...) for vbi capture queue and vbi_read timers,
   prevents oopses on vbi usage

 - replace alps_bsrv2 driver by generic ves1893 & ves1993 driver
   (Andreas Oberritter)