Replace all local variables 'mlwsw_hwmon_attr' by 'mlxsw_hwmon_attr'.
All variable prefixes should start with 'mlxsw' according to the naming
convention, so 'mlwsw' is changed to 'mlxsw'.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver registers with both the hwmon and thermal subsystems.
Therefore, there is no need for the thermal subsystem to automatically
create hwmon entries upon registration of a thermal zone, as this
results in duplicate information.

Avoid creation of virtual hwmon objects by thermal subsystem by
registering a thermal zone with 'no_hwmon' set to 'true'.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Only VLAN entries installed on the bridge device itself should be
considered when checking whether a packet with a specific VLAN can be
mirrored via a bridge device. VLAN entries only used to keep context
(i.e., entries with 'BRIDGE_VLAN_INFO_BRENTRY' unset) should be ignored.

Fix this by preventing mirroring when the VLAN entry does not have the
'BRIDGE_VLAN_INFO_BRENTRY' flag set.

Fixes: ddaff504 ("mlxsw: spectrum: remove guards against !BRIDGE_VLAN_INFO_BRENTRY")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Avoid trap group setting if driver is not capable of EMAD support.
For example, "mlxsw_minimal" driver works over I2C bus, overs which
EMADs cannot be sent.
Validation is performed by testing feature 'MLXSW_BUS_F_TXRX'.

Fixes: 74e0494d ("mlxsw: core: Move basic_trap_groups_set() call out of EMAD init code")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/mctp/device.c:140:11: warning: Assigned value is garbage or undefined
[clang-analyzer-core.uninitialized.Assign]
        mcb->idx = idx;

- Not a real problem due to how the callback runs, fix the warning.

net/mctp/route.c:458:4: warning: Value stored to 'msk' is never read
[clang-analyzer-deadcode.DeadStores]
        msk = container_of(key->sk, struct mctp_sock, sk);

- 'msk' dead assignment can be removed here.
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Matt Johnston says:

====================
mctp: Fix incorrect refs for extended addr

This fixes an incorrect netdev unref and also addresses the race
condition identified by Jakub in v2. Thanks for the review.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In the extended addressing local route output codepath
dev_get_by_index_rcu() doesn't take a dev_hold() so we shouldn't
dev_put().
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Previously there was a race that could allow the mctp_dev refcount
to hit zero:

rcu_read_lock();
mdev = __mctp_dev_get(dev);
// mctp_unregister() happens here, mdev->refs hits zero
mctp_dev_hold(dev);
rcu_read_unlock();

Now we make __mctp_dev_get() take the hold itself. It is safe to test
against the zero refcount because __mctp_dev_get() is called holding
rcu_read_lock and mctp_dev uses kfree_rcu().
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alvin Šipraga says:

====================
net: dsa: realtek: fix PHY register read corruption

These two patches fix the issue reported by Arınç where PHY register
reads sometimes return garbage data.

v1 -> v2:

- no code changes
- just update the commit message of patch 2 to reflect the conclusion
  of further investigation requested by Vladimir
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Realtek switches in the rtl8365mb family can access the PHY registers of
the internal PHYs via the switch registers. This method is called
indirect access. At a high level, the indirect PHY register access
method involves reading and writing some special switch registers in a
particular sequence. This works for both SMI and MDIO connected
switches.

Currently the rtl8365mb driver does not take any care to serialize the
aforementioned access to the switch registers. In particular, it is
permitted for other driver code to access other switch registers while
the indirect PHY register access is ongoing. Locking is only done at the
regmap level. This, however, is a bug: concurrent register access, even
to unrelated switch registers, risks corrupting the PHY register value
read back via the indirect access method described above.

Arınç reported that the switch sometimes returns nonsense data when
reading the PHY registers. In particular, a value of 0 causes the
kernel's PHY subsystem to think that the link is down, but since most
reads return correct data, the link then flip-flops between up and down
over a period of time.

The aforementioned bug can be readily observed by:

 1. Enabling ftrace events for regmap and mdio
 2. Polling BSMR PHY register for a connected port;
    it should always read the same (e.g. 0x79ed)
 3. Wait for step 2 to give a different value

Example command for step 2:

    while true; do phytool read swp2/2/0x01; done

On my i.MX8MM, the above steps will yield a bogus value for the BSMR PHY
register within a matter of seconds. The interleaved register access it
then evident in the trace log:

 kworker/3:4-70      [003] .......  1927.139849: regmap_reg_write: ethernet-switch reg=1004 val=bd
     phytool-16816   [002] .......  1927.139979: regmap_reg_read: ethernet-switch reg=1f01 val=0
 kworker/3:4-70      [003] .......  1927.140381: regmap_reg_read: ethernet-switch reg=1005 val=0
     phytool-16816   [002] .......  1927.140468: regmap_reg_read: ethernet-switch reg=1d15 val=a69
 kworker/3:4-70      [003] .......  1927.140864: regmap_reg_read: ethernet-switch reg=1003 val=0
     phytool-16816   [002] .......  1927.140955: regmap_reg_write: ethernet-switch reg=1f02 val=2041
 kworker/3:4-70      [003] .......  1927.141390: regmap_reg_read: ethernet-switch reg=1002 val=0
     phytool-16816   [002] .......  1927.141479: regmap_reg_write: ethernet-switch reg=1f00 val=1
 kworker/3:4-70      [003] .......  1927.142311: regmap_reg_write: ethernet-switch reg=1004 val=be
     phytool-16816   [002] .......  1927.142410: regmap_reg_read: ethernet-switch reg=1f01 val=0
 kworker/3:4-70      [003] .......  1927.142534: regmap_reg_read: ethernet-switch reg=1005 val=0
     phytool-16816   [002] .......  1927.142618: regmap_reg_read: ethernet-switch reg=1f04 val=0
     phytool-16816   [002] .......  1927.142641: mdio_access: SMI-0 read  phy:0x02 reg:0x01 val:0x0000 <- ?!
 kworker/3:4-70      [003] .......  1927.143037: regmap_reg_read: ethernet-switch reg=1001 val=0
 kworker/3:4-70      [003] .......  1927.143133: regmap_reg_read: ethernet-switch reg=1000 val=2d89
 kworker/3:4-70      [003] .......  1927.143213: regmap_reg_write: ethernet-switch reg=1004 val=be
 kworker/3:4-70      [003] .......  1927.143291: regmap_reg_read: ethernet-switch reg=1005 val=0
 kworker/3:4-70      [003] .......  1927.143368: regmap_reg_read: ethernet-switch reg=1003 val=0
 kworker/3:4-70      [003] .......  1927.143443: regmap_reg_read: ethernet-switch reg=1002 val=6

The kworker here is polling MIB counters for stats, as evidenced by the
register 0x1004 that we are writing to (RTL8365MB_MIB_ADDRESS_REG). This
polling is performed every 3 seconds, but is just one example of such
unsynchronized access. In Arınç's case, the driver was not using the
switch IRQ, so the PHY subsystem was itself doing polling analogous to
phytool in the above example.

A test module was created [see second Link] to simulate such spurious
switch register accesses while performing indirect PHY register reads
and writes. Realtek was also consulted to confirm whether this is a
known issue or not. The conclusion of these lines of inquiry is as
follows:

1. Reading of PHY registers via indirect access will be aborted if,
   after executing the read operation (via a write to the
   INDIRECT_ACCESS_CTRL_REG), any register is accessed, other than
   INDIRECT_ACCESS_STATUS_REG.

2. The PHY register indirect read is only complete when
   INDIRECT_ACCESS_STATUS_REG reads zero.

3. The INDIRECT_ACCESS_DATA_REG, which is read to get the result of the
   PHY read, will contain the result of the last successful read
   operation. If there was spurious register access and the indirect
   read was aborted, then this register is not guaranteed to hold
   anything meaningful and the PHY read will silently fail.

4. PHY writes do not appear to be affected by this mechanism.

5. Other similar access routines, such as for MIB counters, although
   similar to the PHY indirect access method, are actually table access.
   Table access is not affected by spurious reads or writes of other
   registers. However, concurrent table access is not allowed. Currently
   this is protected via mib_lock, so there is nothing to fix.

The above statements are corroborated both via the test module and
through consultation with Realtek. In particular, Realtek states that
this is simply a property of the hardware design and is not a hardware
bug.

To fix this problem, one must guard against regmap access while the
PHY indirect register read is executing. Fix this by using the newly
introduced "nolock" regmap in all PHY-related functions, and by aquiring
the regmap mutex at the top level of the PHY register access callbacks.
Although no issue has been observed with PHY register _writes_, this
change also serializes the indirect access method there. This is done
purely as a matter of convenience and for reasons of symmetry.

Fixes: 4af2950c ("net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC")
Link: https://lore.kernel.org/netdev/CAJq09z5FCgG-+jVT7uxh1a-0CiiFsoKoHYsAWJtiKwv7LXKofQ@mail.gmail.com/
Link: https://lore.kernel.org/netdev/871qzwjmtv.fsf@bang-olufsen.dk/Reported-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reported-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently there is no way for Realtek DSA subdrivers to serialize
consecutive regmap accesses. In preparation for a bugfix relating to
indirect PHY register access - which involves a series of regmap
reads and writes - add a facility for subdrivers to serialize their
regmap access.

Specifically, a mutex is added to the driver private data structure and
the standard regmap is initialized with custom lock/unlock ops which use
this mutex. Then, a "nolock" variant of the regmap is added, which is
functionally equivalent to the existing regmap except that regmap
locking is disabled. Functions that wish to serialize a sequence of
regmap accesses may then lock the newly introduced driver-owned mutex
before using the nolock regmap.

Doing things this way means that subdriver code that doesn't care about
serialized register access - i.e. the vast majority of code - needn't
worry about synchronizing register access with an external lock: it can
just continue to use the original regmap.

Another advantage of this design is that, while regmaps with locking
disabled do not expose a debugfs interface for obvious reasons, there
still exists the original regmap which does expose this interface. This
interface remains safe to use even combined with driver codepaths that
use the nolock regmap, because said codepaths will use the same mutex
to synchronize access.

With respect to disadvantages, it can be argued that having
near-duplicate regmaps is confusing. However, the naming is rather
explicit, and examples will abound.

Finally, while we are at it, rename realtek_smi_mdio_regmap_config to
realtek_smi_regmap_config. This makes it consistent with the naming
realtek_mdio_regmap_config in realtek-mdio.c.
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The logic from switchdev_handle_port_obj_add_foreign() is directly
adapted from switchdev_handle_fdb_event_to_device(), which already
detects events on foreign interfaces and reoffloads them towards the
switchdev neighbors.

However, when we have a simple br0 <-> bond0 <-> swp0 topology and the
switchdev_handle_port_obj_add_foreign() gets called on bond0, we get
stuck into an infinite recursion:

1. bond0 does not pass check_cb(), so we attempt to find switchdev
   neighbor interfaces. For that, we recursively call
   __switchdev_handle_port_obj_add() for bond0's bridge, br0.

2. __switchdev_handle_port_obj_add() recurses through br0's lowers,
   essentially calling __switchdev_handle_port_obj_add() for bond0

3. Go to step 1.

This happens because switchdev_handle_fdb_event_to_device() and
switchdev_handle_port_obj_add_foreign() are not exactly the same.
The FDB event helper special-cases LAG interfaces with its lag_mod_cb(),
so this is why we don't end up in an infinite loop - because it doesn't
attempt to treat LAG interfaces as potentially foreign bridge ports.

The problem is solved by looking ahead through the bridge's lowers to
see whether there is any switchdev interface that is foreign to the @dev
we are currently processing. This stops the recursion described above at
step 1: __switchdev_handle_port_obj_add(bond0) will not create another
call to __switchdev_handle_port_obj_add(br0). Going one step upper
should only happen when we're starting from a bridge port that has been
determined to be "foreign" to the switchdev driver that passes the
foreign_dev_check_cb().

Fixes: c4076cdd ("net: switchdev: introduce switchdev_handle_port_obj_{add,del} for foreign interfaces")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ever-vigilant Linux kernel test robot reminded us that
we need to use the correct include files to be sure that
all the build variations will work correctly.  Adding the
vmalloc.h include takes care of declaring our use of vzalloc()
and vfree().

drivers/net/ethernet/pensando/ionic/ionic_lif.c:396:17: error: implicit
declaration of function 'vfree'; did you mean 'kvfree'?

drivers/net/ethernet/pensando/ionic/ionic_lif.c:531:21: warning:
assignment to 'struct ionic_desc_info *' from 'int' makes pointer from
integer without a cast

Fixes: 116dce0f ("ionic: Use vzalloc for large per-queue related buffers")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Link: https://lore.kernel.org/r/20220223015731.22025-1-snelson@pensando.ioSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Eric Dumazet says:

====================
tcp: take care of another syzbot issue

This is a minor issue: It took months for syzbot to find a C repro,
and even with it, I had to spend a lot of time to understand KFENCE
was a prereq. With the default kfence 500ms interval, I had to be
very patient to trigger the kernel warning and perform my analysis.

This series targets net-next tree, because I added a new generic helper
in the first patch, then fixed the issue in the second one.
They can be backported once proven solid.
====================

Link: https://lore.kernel.org/r/20220222032113.4005821-1-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

syzbot found another way to trigger the infamous WARN_ON_ONCE(delta < len)
in skb_try_coalesce() [1]

I was able to root cause the issue to kfence.

When kfence is in action, the following assertion is no longer true:

int size = xxxx;
void *ptr1 = kmalloc(size, gfp);
void *ptr2 = kmalloc(size, gfp);

if (ptr1 && ptr2)
	ASSERT(ksize(ptr1) == ksize(ptr2));

We attempted to fix these issues in the blamed commits, but forgot
that TCP was possibly shifting data after skb_unclone_keeptruesize()
has been used, notably from tcp_retrans_try_collapse().

So we not only need to keep same skb->truesize value,
we also need to make sure TCP wont fill new tailroom
that pskb_expand_head() was able to get from a
addr = kmalloc(...) followed by ksize(addr)

Split skb_unclone_keeptruesize() into two parts:

1) Inline skb_unclone_keeptruesize() for the common case,
   when skb is not cloned.

2) Out of line __skb_unclone_keeptruesize() for the 'slow path'.

WARNING: CPU: 1 PID: 6490 at net/core/skbuff.c:5295 skb_try_coalesce+0x1235/0x1560 net/core/skbuff.c:5295
Modules linked in:
CPU: 1 PID: 6490 Comm: syz-executor161 Not tainted 5.17.0-rc4-syzkaller-00229-g4f12b742 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:skb_try_coalesce+0x1235/0x1560 net/core/skbuff.c:5295
Code: bf 01 00 00 00 0f b7 c0 89 c6 89 44 24 20 e8 62 24 4e fa 8b 44 24 20 83 e8 01 0f 85 e5 f0 ff ff e9 87 f4 ff ff e8 cb 20 4e fa <0f> 0b e9 06 f9 ff ff e8 af b2 95 fa e9 69 f0 ff ff e8 95 b2 95 fa
RSP: 0018:ffffc900063af268 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 00000000ffffffd5 RCX: 0000000000000000
RDX: ffff88806fc05700 RSI: ffffffff872abd55 RDI: 0000000000000003
RBP: ffff88806e675500 R08: 00000000ffffffd5 R09: 0000000000000000
R10: ffffffff872ab659 R11: 0000000000000000 R12: ffff88806dd554e8
R13: ffff88806dd9bac0 R14: ffff88806dd9a2c0 R15: 0000000000000155
FS:  00007f18014f9700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020002000 CR3: 000000006be7a000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 tcp_try_coalesce net/ipv4/tcp_input.c:4651 [inline]
 tcp_try_coalesce+0x393/0x920 net/ipv4/tcp_input.c:4630
 tcp_queue_rcv+0x8a/0x6e0 net/ipv4/tcp_input.c:4914
 tcp_data_queue+0x11fd/0x4bb0 net/ipv4/tcp_input.c:5025
 tcp_rcv_established+0x81e/0x1ff0 net/ipv4/tcp_input.c:5947
 tcp_v4_do_rcv+0x65e/0x980 net/ipv4/tcp_ipv4.c:1719
 sk_backlog_rcv include/net/sock.h:1037 [inline]
 __release_sock+0x134/0x3b0 net/core/sock.c:2779
 release_sock+0x54/0x1b0 net/core/sock.c:3311
 sk_wait_data+0x177/0x450 net/core/sock.c:2821
 tcp_recvmsg_locked+0xe28/0x1fd0 net/ipv4/tcp.c:2457
 tcp_recvmsg+0x137/0x610 net/ipv4/tcp.c:2572
 inet_recvmsg+0x11b/0x5e0 net/ipv4/af_inet.c:850
 sock_recvmsg_nosec net/socket.c:948 [inline]
 sock_recvmsg net/socket.c:966 [inline]
 sock_recvmsg net/socket.c:962 [inline]
 ____sys_recvmsg+0x2c4/0x600 net/socket.c:2632
 ___sys_recvmsg+0x127/0x200 net/socket.c:2674
 __sys_recvmsg+0xe2/0x1a0 net/socket.c:2704
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: c4777efa ("net: add and use skb_unclone_keeptruesize() helper")
Fixes: 097b9146 ("net: fix up truesize of cloned skb in skb_prepare_for_shift()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We have multiple places where this helper is convenient,
and plan using it in the following patch.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

All other skbs allocated for TCP tx are using MAX_TCP_HEADER already.

MAX_HEADER can be too small for some cases (like eBPF based encapsulation),
so this can avoid extra pskb_expand_head() in lower stacks.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220222031115.4005060-1-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add option to shift the clock by a specified number of nanoseconds.

The new argument -n will specify the number of nanoseconds to add to the
ptp clock. Since the API doesn't support negative shifts those needs to
be calculated by subtracting full seconds and adding a nanosecond offset.
Signed-off-by: Maciek Machnikowski <maciek@machnikowski.net>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/20220221200637.125595-1-maciek@machnikowski.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].

This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().

This issue was found with the help of Coccinelle and audited and fixed,
manually.

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.16/process/deprecated.html#zero-length-and-one-element-arrays

Link: https://github.com/KSPP/linux/issues/79Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20220221173415.GA1149599@embeddedorSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Vladimir Oltean reports that probing on DSA drivers that aren't yet
populating supported_interfaces now fails. Fix this by allowing
phylink to detect whether DSA actually provides an underlying
mac_select_pcs() implementation.
Reported-by: Vladimir Oltean <olteanv@gmail.com>
Fixes: bde01822 ("net: dsa: add support for phylink mac_select_pcs()")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/E1nMCD6-00A0wC-FG@rmk-PC.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

30 seconds is too long interval especially if it used with ip -s l.
Reduce polling interval to 5 sec.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20220221084129.3660124-1-o.rempel@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Alexandra Winter says:

====================
s390/net: updates 2022-02-21

Just cleanup. No functional changes, as currently virt=phys in s390.
====================

Link: https://lore.kernel.org/r/20220221145633.3869621-1-wintera@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Fix virtual vs physical address confusion (which currently are the same).
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Fix virtual vs physical address confusion (which currently are the same).
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Another thing making netns dismantles potentially very slow is located
in gro_cells_destroy(),
whenever cleanup_net() has to remove a device using gro_cells framework.

RTNL is not held at this stage, so synchronize_net()
is calling synchronize_rcu():

netdev_run_todo()
 ip_tunnel_dev_free()
  gro_cells_destroy()
   synchronize_net()
    synchronize_rcu() // Ouch.

This patch uses call_rcu(), and gave me a 25x performance improvement
in my tests.

cleanup_net() is no longer blocked ~10 ms per synchronize_rcu()
call.

In the case we could not allocate the memory needed to queue the
deferred free, use synchronize_rcu_expedited()

v2: made percpu_free_defer_callback() static
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20220220041155.607637-1-eric.dumazet@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Russell King says:

====================
net: dsa: b53: convert to phylink_generic_validate() and mark as non-legacy

This series converts b53 to use phylink_generic_validate() and also
marks this driver as non-legacy.

Patch 1 cleans up an if() condition to be more readable before we
proceed with the conversion.

Patch 2 populates the supported_interfaces and mac_capabilities members
of phylink_config.

Patch 3 drops the use of phylink_helper_basex_speed() which is now not
necessary.

Patch 4 switches the driver to use phylink_generic_validate()

Patch 5 marks the driver as non-legacy.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The B53 driver does not make use of the speed, duplex, pause or
advertisement in its phylink_mac_config() implementation, so it can be
marked as a non-legacy driver.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Switch the Broadcom b53 driver to using the phylink_generic_validate()
implementation by removing its own .phylink_validate method and
associated code.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that we have a better method to select SFP interface modes, we
no longer need to use phylink_helper_basex_speed() in a driver's
validation function.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Populate the supported interfaces and MAC capabilities for the Broadcom
B53 DSA switches in preparation to using these for the generic
validation functionality.

The interface modes are derived from:
- b53_serdes_phylink_validate()
- SRAB mux configuration
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

I've stared at this if() statement for a while trying to work out if
it really does correspond with the comment above, and it does seem to.
However, let's make it more readable and phrase it in the same way as
the comment.

Also add a FIXME into the comment - we appear to deny Gigabit modes for
802.3z interface modes, but 802.3z interface modes only operate at
gigabit and above.
Reviewed-by: Florian Fainelli &lt;f.fainelli@gmail.com&gt;                            Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

This code dereferences "skb" after calling dev_kfree_skb().

Fixes: 2dc95a4d ("net: Add dm9051 driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220221105440.GA10045@kiliSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In hsr, lockdep_is_held() is needed for rcu_dereference_bh_check().
But if lockdep is not enabled, lockdep_is_held() causes a build error:

    ERROR: modpost: "lockdep_is_held" [net/hsr/hsr.ko] undefined!

Thus, this patch solved by adding lockdep_hsr_is_held(). This helper
function calls the lockdep_is_held() when lockdep is enabled, and returns 1
if not defined.

Fixes: e7f27420 ("net: hsr: fix suspicious RCU usage warning in hsr_node_get_first()")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Juhee Kang <claudiajkang@gmail.com>
Link: https://lore.kernel.org/r/20220220153250.5285-1-claudiajkang@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Rakesh Babu Saladi says:

====================
RVU AF and NETDEV drivers' PTP updates.

Patch 1: Add suppot such that RVU drivers support new timestamp format.
Patch 2: This patch adds workaround for PTP errata.

Changes made from  v1 to v2
1. CC'd Richard Cochran to review PTP related patches.
2. Removed a patch from the old patch series. Will submit the removed patch
separately.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds workaround for PTP errata given below.

1. At the time of 1 sec rollover of nano-second counter,
   the nano-second counter is set to 0. However, it should
   be set to (existing counter_value - 10^9). This leads to
   an accumulating error in the timestamp value with each sec
   rollover.
2. Additionally, the nano-second counter currently is rolling
   over at 'h3B9A_C9FF. It should roll over at 'h3B9A_CA00.

The workaround for issue #1 is to speed up the ptp clock by
adjusting PTP_CLOCK_COMP register to the desired value to
compensate for the nanoseconds lost per each second.

The workaround for issue #2 is to slow down the ptp clock
such that the rollover occurs at ~1sec.
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Rakesh Babu Saladi <rsaladi2@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The cn10k hardware ptp timestamp format has been modified primarily
to support 1-step ptp clock. The 64-bit timestamp used by hardware is
split into two 32-bit fields, the upper one holds seconds, the lower
one nanoseconds. A new register (PTP_CLOCK_SEC) has been added that
returns the current seconds value. The nanoseconds register PTP_CLOCK_HI
resets after every second. The cn10k RPM block provides Rx/Tx timestamps
to the NIX block using the new timestamp format. The software can read
the current timestamp in nanoseconds by reading both PTP_CLOCK_SEC &
PTP_CLOCK_HI registers.

This patch provides support for new timestamp format.
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Rakesh Babu Saladi <rsaladi2@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Hangbin Liu says:

====================
bonding: add IPv6 NS/NA monitor support

This patch add bond IPv6 NS/NA monitor support. A new option
ns_ip6_target is added, which is similar with arp_ip_target.
The IPv6 NS/NA monitor will take effect when there is a valid IPv6
address. Both ARP monitor and NS monitor will working at the same time.

A new extra storage field is added to struct bond_opt_value for IPv6 support.

Function bond_handle_vlan() is split from bond_arp_send() for both
IPv4/IPv6 usage.

To alloc NS message and send out. ndisc_ns_create() and ndisc_send_skb()
are exported.

v1 -> v2:
1. remove sysfs entry[1] and only keep netlink support.

RFC -> v1:
1. define BOND_MAX_ND_TARGETS as BOND_MAX_ARP_TARGETS
2. adjust for reverse xmas tree ordering of local variables
3. remove bond_do_ns_validate()
4. add extra field for bond_opt_value
5. set IS_ENABLED(CONFIG_IPV6) for IPv6 codes

[1] https://lore.kernel.org/netdev/8863.1645071997@famine
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch add a new bonding option ns_ip6_target, which correspond
to the arp_ip_target. With this we set IPv6 targets and send IPv6 NS
request to determine the health of the link.

For other related options like the validation, we still use
arp_validate, and will change to ns_validate later.

Note: the sysfs configuration support was removed based on
https://lore.kernel.org/netdev/8863.1645071997@famineSigned-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a new bonding parameter ns_targets to store IPv6 address.
Add required bond_ns_send/rcv functions first before adding
IPv6 address option setting.

Add two functions bond_send/rcv_validate so we can send/recv
ARP and NS at the same time.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adding an extra storage field for bond_opt_value so we can set large
bytes of data for bonding options in future, e.g. IPv6 address.

Define a new call bond_opt_initextra(). Also change the checking order of
__bond_opt_init() and check values first.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>