- 23 Jul, 2021 40 commits
-
-
Tao Zhou authored
Same as Navi10. v2: squash in updates (Alex) Signed-off-by:
Tao Zhou <tao.zhou1@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Tao Zhou authored
Add cp/rlc fw loading support and gfx golden setting. v2: squash in updates (Alex) Signed-off-by:
-
Tao Zhou authored
Add ip blocks for cyan_skillfish. Signed-off-by:
-
Tao Zhou authored
Use FAMILY_NV for cyan_skillfish. Signed-off-by:
-
Tao Zhou authored
Add ip offset definition for cyan_skillfish and initialize it. v2: squash in ip_offset updates (Alex) Signed-off-by:
-
Tao Zhou authored
Add cyan_skillfish asic family. Signed-off-by:
-
Lang Yu authored
Adjust toc fw_name string length to PSP_FW_NAME_LEN. Signed-off-by:
Lang Yu <lang.yu@amd.com> Reviewed-by:
Huang Rui <ray.huang@amd.com> Signed-off-by:
-
Tao Zhou authored
Longer firmware name needs more space. Signed-off-by:
-
Aaron Liu authored
Add Yellow Carp PCI id support. v2: add another DID Signed-off-by:
Aaron Liu <aaron.liu@amd.com> Reviewed-by:
-
Aaron Liu authored
0x1681 has a different external revision id. Signed-off-by:
-
Kai-Heng Feng authored
Devices created by mfd_add_hotplug_devices() don't really increase the index of its name, so get_mfd_cell_dev() cannot find any device, hence a NULL dev is passed to pm_genpd_add_device(): [ 56.974926] (NULL device *): amdgpu: device acp_audio_dma.0.auto added to pm domain [ 56.974933] (NULL device *): amdgpu: Failed to add dev to genpd [ 56.974941] [drm:amdgpu_device_ip_init [amdgpu]] *ERROR* hw_init of IP block <acp_ip> failed -22 [ 56.975810] amdgpu 0000:00:01.0: amdgpu: amdgpu_device_ip_init failed [ 56.975839] amdgpu 0000:00:01.0: amdgpu: Fatal error during GPU init [ 56.977136] ------------[ cut here ]------------ [ 56.977143] kernel BUG at mm/slub.c:4206! [ 56.977158] invalid opcode: 0000 [#1] SMP NOPTI [ 56.977167] CPU: 1 PID: 1648 Comm: modprobe Not tainted 5.12.0-051200rc8-generic #202104182230 [ 56.977175] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./FM2A68M-HD+, BIOS P5.20 02/13/2019 [ 56.977180] RIP: 0010:kfree+0x3bf/0x410 [ 56.977195] Code: 89 e7 48 d3 e2 f7 da e8 5f 0d 02 00 80 e7 02 75 3e 44 89 ee 4c 89 e7 e8 ef 5f fd ff e9 fa fe ff ff 49 8b 44 24 08 a8 01 75 b7 <0f> 0b 4c 8b 4d b0 48 8b 4d a8 48 89 da 4c 89 e6 41 b8 01 00 00 00 [ 56.977202] RSP: 0018:ffffa48640ff79f0 EFLAGS: 00010246 [ 56.977210] RAX: 0000000000000000 RBX: ffff9286127d5608 RCX: 0000000000000000 [ 56.977215] RDX: 0000000000000000 RSI: ffffffffc099d0fb RDI: ffff9286127d5608 [ 56.977220] RBP: ffffa48640ff7a48 R08: 0000000000000001 R09: 0000000000000001 [ 56.977224] R10: 0000000000000000 R11: ffff9286087d8458 R12: fffff3ae0449f540 [ 56.977229] R13: 0000000000000000 R14: dead000000000122 R15: dead000000000100 [ 56.977234] FS: 00007f9de5929540(0000) GS:ffff928612e80000(0000) knlGS:0000000000000000 [ 56.977240] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 56.977245] CR2: 00007f697dd97160 CR3: 00000001110f0000 CR4: 00000000001506e0 [ 56.977251] Call Trace: [ 56.977261] amdgpu_dm_encoder_destroy+0x1b/0x30 [amdgpu] [ 56.978056] drm_mode_config_cleanup+0x4f/0x2e0 [drm] [ 56.978147] ? kfree+0x3dd/0x410 [ 56.978157] ? drm_managed_release+0xc8/0x100 [drm] [ 56.978232] drm_mode_config_init_release+0xe/0x10 [drm] [ 56.978311] drm_managed_release+0x9d/0x100 [drm] [ 56.978388] devm_drm_dev_init_release+0x4d/0x70 [drm] [ 56.978450] devm_action_release+0x15/0x20 [ 56.978459] release_nodes+0x77/0xc0 [ 56.978469] devres_release_all+0x3f/0x50 [ 56.978477] really_probe+0x245/0x460 [ 56.978485] driver_probe_device+0xe9/0x160 [ 56.978492] device_driver_attach+0xab/0xb0 [ 56.978499] __driver_attach+0x8f/0x150 [ 56.978506] ? device_driver_attach+0xb0/0xb0 [ 56.978513] bus_for_each_dev+0x7e/0xc0 [ 56.978521] driver_attach+0x1e/0x20 [ 56.978528] bus_add_driver+0x135/0x1f0 [ 56.978534] driver_register+0x91/0xf0 [ 56.978540] __pci_register_driver+0x54/0x60 [ 56.978549] amdgpu_init+0x77/0x1000 [amdgpu] [ 56.979246] ? 0xffffffffc0dbc000 [ 56.979254] do_one_initcall+0x48/0x1d0 [ 56.979265] ? kmem_cache_alloc_trace+0x120/0x230 [ 56.979274] ? do_init_module+0x28/0x280 [ 56.979282] do_init_module+0x62/0x280 [ 56.979288] load_module+0x71c/0x7a0 [ 56.979296] __do_sys_finit_module+0xc2/0x120 [ 56.979305] __x64_sys_finit_module+0x1a/0x20 [ 56.979311] do_syscall_64+0x38/0x90 [ 56.979319] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 56.979328] RIP: 0033:0x7f9de54f989d [ 56.979335] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d c3 f5 0c 00 f7 d8 64 89 01 48 [ 56.979342] RSP: 002b:00007ffe3c395a28 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 56.979350] RAX: ffffffffffffffda RBX: 0000560df3ef4330 RCX: 00007f9de54f989d [ 56.979355] RDX: 0000000000000000 RSI: 0000560df3a07358 RDI: 000000000000000f [ 56.979360] RBP: 0000000000040000 R08: 0000000000000000 R09: 0000000000000000 [ 56.979365] R10: 000000000000000f R11: 0000000000000246 R12: 0000560df3a07358 [ 56.979369] R13: 0000000000000000 R14: 0000560df3ef4460 R15: 0000560df3ef4330 [ 56.979377] Modules linked in: amdgpu(+) iommu_v2 gpu_sched drm_ttm_helper ttm drm_kms_helper cec rc_core i2c_algo_bit fb_sys_fops syscopyarea sysfillrect sysimgblt nft_counter xt_tcpudp ipt_REJECT nf_reject_ipv4 xt_conntrack iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_mangle iptable_raw iptable_security ip_set nf_tables libcrc32c nfnetlink ip6_tables iptable_filter bpfilter input_leds binfmt_misc edac_mce_amd kvm_amd ccp kvm snd_hda_codec_realtek snd_hda_codec_generic crct10dif_pclmul snd_hda_codec_hdmi ledtrig_audio ghash_clmulni_intel aesni_intel snd_hda_intel snd_intel_dspcfg snd_seq_midi crypto_simd snd_intel_sdw_acpi cryptd snd_hda_codec snd_seq_midi_event snd_rawmidi snd_hda_core snd_hwdep snd_seq fam15h_power k10temp snd_pcm snd_seq_device snd_timer snd mac_hid soundcore sch_fq_codel nct6775 hwmon_vid drm ip_tables x_tables autofs4 dm_mirror dm_region_hash dm_log hid_generic usbhid hid uas usb_storage r8169 crc32_pclmul realtek ahci xhci_pci i2c_piix4 [ 56.979521] xhci_pci_renesas libahci video [ 56.979541] ---[ end trace cb8f6a346f18da7b ]--- Instead of finding MFD hotplugged device by its name, simply iterate over the child devices to avoid the issue. Squash in unused variable removal (Alex) BugLink: https://bugs.launchpad.net/bugs/1920674 Fixes: 25030321 ("drm/amd: add pm domain for ACP IP sub blocks") Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Candice Li authored
Signed-off-by:
Candice Li <candice.li@amd.com> Reviewed-by:
John Clements <John.Clements@amd.com> Signed-off-by:
-
Jingwen Chen authored
[Why] Currently all timedout job will be considered to be guilty. In SRIOV multi-vf use case, the vf flr happens first and then job time out is found. There can be several jobs timeout during a very small time slice. And if the innocent sdma job time out is found before the real bad job, then the innocent sdma job will be set to guilty. This will lead to a page fault after resubmitting job. [How] If the job is a kernel job, we will always consider it not guilty Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Jingwen Chen <Jingwen.Chen2@amd.com> Signed-off-by:
-
Graham Sider authored
Update Arcturus/Aldebaran thermal throttle SMI event path to use ASIC-independent throttler bits when logging. Signed-off-by:
Graham Sider <Graham.Sider@amd.com> Reviewed-by:
Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by:
-
Anson Jacob authored
Fix make htmldocs complaint: ./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:628: warning: Excess function parameter 'interrupt_params' description in 'DMUB_TRACE_MAX_READ' v2: Moved DMUB_TRACE_MAX_READ macro above function documentation Signed-off-by:
Anson Jacob <Anson.Jacob@amd.com> CC: Harry Wentland <harry.wentland@amd.com> Acked-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Anson Jacob authored
Add new line to phy_settings output Signed-off-by:
-
Anson Jacob authored
link_rate is updated via debugfs using hex values, set it to output in hex as well. eg: Resolution: 1920x1080@144Hz cat /sys/kernel/debug/dri/0/DP-1/link_settings Current: 4 0x14 0 Verified: 4 0x1e 0 Reported: 4 0x1e 16 Preferred: 0 0x0 0 echo "4 0x1e" > /sys/kernel/debug/dri/0/DP-1/link_settings cat /sys/kernel/debug/dri/0/DP-1/link_settings Current: 4 0x1e 0 Verified: 4 0x1e 0 Reported: 4 0x1e 16 Preferred: 4 0x1e 0 Signed-off-by:
-
Oak Zeng authored
start_cpsch and stop_cpsch can be called during kfd device initialization or during gpu reset/recovery. So they can run concurrently. Currently in start_cpsch and stop_cpsch, pm_init and pm_uninit is not protected by the dpm lock. Imagine such a case that user use packet manager's function to submit a pm4 packet to hang hws (ie through command cat /sys/class/kfd/kfd/topology/nodes/1/gpu_id | sudo tee /sys/kernel/debug/kfd/hang_hws), while kfd device is under device reset/recovery so packet manager can be not initialized. There will be unpredictable protection fault in such case. This patch moves pm_init/uninit inside the dpm lock and check packet manager is initialized before using packet manager function. Signed-off-by:
Oak Zeng <Oak.Zeng@amd.com> Acked-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Oak Zeng authored
This variable will be used to determine whether packet manager is initialized or not, in a future patch. Signed-off-by:
-
Oak Zeng authored
Renaming packets to packet_mgr to reflect the real meaning of this variable. Signed-off-by:
-
Oak Zeng authored
Function name "psp_np_fw_load" is not proper as people don't know _np_fw_ means "non psp firmware". Change the function name to psp_load_non_psp_fw for better understanding. Same thing for function psp_execute_np_fw_load. Signed-off-by:
-
Oak Zeng authored
The printing message "PSP loading VCN firmware" is mis-leading because people might think driver is loading VCN firmware. Actually when this message is printed, driver is just preparing some VCN ucode, not loading VCN firmware yet. The actual VCN firmware loading will be in the PSP block hw_init. Fix the printing message Signed-off-by:
-
Roy Sun authored
Squash in warning fix (Alex) Signed-off-by:
Roy Sun <Roy.Sun@amd.com> Reviewed-by:
Zhou pengju <pengju.zhou@amd.com> Signed-off-by:
-
Roy Sun authored
The callback functions are used for SRIOV read/write instead of just for rlcg read/write Signed-off-by:
-
Veerabadhran Gopalakrishnan authored
Signed-off-by:
Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com> Reviewed-by:
James Zhu <James.Zhu@amd.com> Signed-off-by:
-
Jonathan Kim authored
Similar to xGMI reporting the min/max bandwidth between direct peers, PCIe will report the min/max bandwidth to the KFD. Signed-off-by:
Jonathan Kim <jonathan.kim@amd.com> Reviewed-by:
-
Jonathan Kim authored
Report the min/max bandwidth in megabytes to the kfd for direct xgmi connections only. Indirect peers will report 0 since indirect route is unknown. Signed-off-by:
-
Jonathan Kim authored
The TA can now be invoked to provide the number of xgmi links connecting a direct source and destination peer. Non-direct peers will report zero links. Signed-off-by:
-
Anson Jacob authored
make htmldocs complaints about parameter for amdgpu_bo_add_to_shadow_list ./drivers/gpu/drm/amd/amdgpu/amdgpu_object.c:739: warning: Excess function parameter 'bo' description in 'amdgpu_bo_add_to_shadow_list' ./drivers/gpu/drm/amd/amdgpu/amdgpu_object.c:739: warning: Function parameter or member 'vmbo' not described in 'amdgpu_bo_add_to_shadow_list' ./drivers/gpu/drm/amd/amdgpu/amdgpu_object.c:739: warning: Excess function parameter 'bo' description in 'amdgpu_bo_add_to_shadow_list' Signed-off-by:
-
Lijo Lazar authored
Add support for board power calibration on Aldebaran. Board calibration is done after DC offset calibration. Signed-off-by:
Lijo Lazar <lijo.lazar@amd.com> Reviewed-by:
Kevin Wang <kevin1.wang@amd.com> Signed-off-by:
-
Eric Yang authored
[Why] PMFW message which previously thought to only control Z9 controls both Z9 and Z10. Also HW design team requested that Z9 must only be supported on eDP due to content protection interop. [How] Change zstate support condition to match updated policy Reviewed-by:
Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
Eric Yang <Eric.Yang2@amd.com> Signed-off-by:
-
Aric Cyr authored
DC version 3.2.145 brings improvements in multiple areas. In summary, we highlight: - Code improvements for passive - Cursor manipulation enhancements - Expand debug in some areas - Fix problems in DML - Other minor code refactors Reviewed-by:
Aric Cyr <aric.cyr@amd.com> Signed-off-by:
-
Anthony Koo authored
- Add reserved bits for future feature development - Fix issue with mismatch with type const - Replaced problematic code with old memcpy and casted problematic pointers to unsigned char pointers Reviewed-by:
Anthony Koo <Anthony.Koo@amd.com> Signed-off-by:
-
Krunoslav Kovac authored
[why] There's a special case where upper plane is not the main plane. If it owns the cursor, it will be invisible in the majority of the screen. [How] The condition for disabling cursor is changed: - check if upper viewport completely covers current. This was the previous change that doesn't handle all scenarios with pipe splitting. - if not, show the cursor only if it's not scaled or no upper pipe. Reviewed-by:
Krunoslav Kovac <Krunoslav.Kovac@amd.com> Signed-off-by:
-
Bindu Ramamurthy authored
[Why] Populate dtbclk values from bwparams for dcn302, dcn303. [How] dtbclk values are fetched from bandwidthparams for all DPM levels and for DPM levels where smu returns 0, previous level values are reported. Reviewed-by:
Roman Li <Roman.Li@amd.com> Acked-by:
Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by:
-
Eric Yang authored
[Why] When an riommu invalidation request come at the same time as a pipe is disabled there can be a case where DCN cannot ACK the request if only one VMID is setup in the inuse list. [How] Setup a second unused VMID will work around the issue. Reviewed-by:
Jun Lei <jun.lei@amd.com> Acked-by:
-
Nevenko Stupar authored
DCN 3x increased Line buffer size for DCHUB latency hiding, from 4 lines of 4K resolution lines to 5 lines of 4K resolution lines. All Line Buffer can be used as extended memory for P State change latency hiding. The maximum number of lines is increased to 32 lines. Finally, LB_MEMORY_CONFIG_1 (LB memory piece 1) and LB_MEMORY _CONFIG_2 (LB memory piece 2) are not affected, no change in size, only 3 pieces is affected, i.e., when all 3 pieces are used in both LB_MEMORY_CONFIG_0 and LB_MEMORY_CONFIG_3 (for 4:2:0) modes. Reviewed-by:
Nevenko Stupar <Nevenko.Stupar@amd.com> Signed-off-by:
-
Mikita Lipski authored
[why] DCN31 doesn't have MALL in DMUB so to avoid sending unknown commands to DMUB just remove the function pointer. [how] Remove apply_idle_power_optimizations from function pointers structure for DCN31 Reviewed-by:
Mikita Lipski <mikita.lipski@amd.com> Signed-off-by:
-
sunglee authored
[WHY] When finding a second pipe for pipe split, currently will look for bottom pipe in context first to decide the second pipe. This causes issues in 2 plane to 1 plane transitions like fullscreen video where bottom pipe no longer exists in the new configuration. [HOW] If previous context had an ODM pipe, use that to find the secondary pipe first before looking at bottom pipe. Reviewed-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by:
sunglee <sunglee@amd.com> Signed-off-by:
-
Camille Cho authored
[Why] We used to unconditionally set backlight path as AUX for panels capable of backlight adjustment via DPCD in set default brightness. [How] This should be limited to OLED panel only since we control backlight via PWM path for SDR mode in LCD HDR panel. Reviewed-by:
Camille Cho <Camille.Cho@amd.com> Signed-off-by:
-
