There is no links_num in struct snd_soc_acpi_mach {}, and we test
!link->num_adr as a condition to end the loop in hda_sdw_machine_select().
So an empty item in struct snd_soc_acpi_link_adr array is required.

Fixes: f77ae7fc ("ASoC: Intel: soc-acpi-intel-mtl-match: add cs42l43 only support")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20240906060224.2241212-3-yung-chuan.liao@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

There is no links_num in struct snd_soc_acpi_mach {}, and we test
!link->num_adr as a condition to end the loop in hda_sdw_machine_select().
So an empty item in struct snd_soc_acpi_link_adr array is required.

Fixes: dd3bd9dc ("ASoC: Intel: soc-acpi-intel-lnl-match: add cs42l43 only support")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20240906060224.2241212-2-yung-chuan.liao@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

sm8250 and sc7280 have lpass codec version 1.0, as these are very old
platforms, they do not have a reliable way to get the codec version
from core_id registers.

On codec versions below 2.0, even though the core_id registers are
available to read, the values of these registers are not unique to be
able to determine the version of the codec dynamically.

Add the version info into of_data, so that driver does not need to use
core_id registers to get version number for such situations.

Fixes: 378918d5 ("ASoC: codecs: lpass-macro: add helpers to get codec version")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://patch.msgid.link/20240816091210.50172-1-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

This fixes the LRCLK polarity for sun8i-h3 and sun50i-h6 in i2s mode
which was wrongly inverted.

The LRCLK was being set in reversed logic compared to the DAI format:
inverted LRCLK for SND_SOC_DAIFMT_IB_NF and SND_SOC_DAIFMT_NB_NF; normal
LRCLK for SND_SOC_DAIFMT_IB_IF and SND_SOC_DAIFMT_NB_IF. Such reversed
logic applies properly for DSP_A, DSP_B, LEFT_J and RIGHT_J modes but
not for I2S mode, for which the LRCLK signal results reversed to what
expected on the bus. The issue is due to a misinterpretation of the
LRCLK polarity bit of the H3 and H6 i2s controllers. Such bit in this
case does not mean "0 => normal" or "1 => inverted" according to the
expected bus operation, but it means "0 => frame starts on low edge" and
"1 => frame starts on high edge" (from the User Manuals).

This commit fixes the LRCLK polarity by setting the LRCLK polarity bit
according to the selected bus mode and renames the LRCLK polarity bit
definition to avoid further confusion.

Fixes: dd657eae ("ASoC: sun4i-i2s: Fix the LRCK polarity")
Fixes: 73adf87b ("ASoC: sun4i-i2s: Add support for H6 I2S")
Signed-off-by: Matteo Martelli <matteomartelli3@gmail.com>
Link: https://patch.msgid.link/20240801-asoc-fix-sun4i-i2s-v2-1-a8e4e9daa363@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

MSI Bravo 17 (D7VEK), like other laptops from the family,
has broken ACPI tables and needs a quirk for internal mic
to work.
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
Link: https://patch.msgid.link/20240829130313.338508-1-markuss.broks@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

In order to get the correct keys when using the ES8326.We will associate
SND_JACK_BTN_1 to KEY_VOLUMEUP and SND_JACK_BTN_2 to KEY_VOLUMEDOWN
when the ES8326 flag is recognized.
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://patch.msgid.link/20240816114921.48913-1-zhangyi@everest-semi.comSigned-off-by: Mark Brown <broonie@kernel.org>

The SOF topology loading function sets the device name for the platform
component link. This should be unset when unloading the topology,
otherwise a machine driver unbind/bind or reprobe would complain about
an invalid component as having both its component name and of_node set:

    mt8186_mt6366 sound: ASoC: Both Component name/of_node are set for AFE_SOF_DL1
    mt8186_mt6366 sound: error -EINVAL: Cannot register card
    mt8186_mt6366 sound: probe with driver mt8186_mt6366 failed with error -22

This happens with machine drivers that set the of_node separately.

Clear the SOF link platform name in the topology unload callback.

Fixes: 311ce4fe ("ASoC: SOF: Add support for loading topologies")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20240821041006.2618855-1-wenst@chromium.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Liao Chen <liaochen4@huawei.com>:

This patchset aims to enable autoloading of some use modules.
By registering MDT, the kernel is allowed to automatically bind
modules to devices that match the specified compatible strings.

Normally, the type of enums is "unsigned int" or "int". GCC has
the "-fshort-enums" option, which instructs the compiler to
use the smallest data type that can hold all the values in
the enum (i.e: char, short, int or their unsigned variants).

According to the GCC documentation, "-fshort-enums" may be
default on some targets. This seems to be the case for SOF
when built for a certain 32-bit ARM platform.

On Linux, this is not the case (tested with "aarch64-linux-gnu-gcc")
which means enums such as "enum sof_comp_type" will end up having
different sizes on Linux and SOF. Since "enum sof_comp_type" is used in
IPC-related structures such as "struct sof_ipc_comp", this means
the fields of the structures will end up being placed at different
offsets. This, in turn, leads to SOF not being able to properly
interpret data passed from Linux.

With this in mind, replace "enum sof_comp_type" from
"struct sof_ipc_comp" with "uint32_t".
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20240826182442.6191-1-laurentiumihalcea111@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Link: https://patch.msgid.link/20240826084924.368387-5-liaochen4@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Link: https://patch.msgid.link/20240826084924.368387-4-liaochen4@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Link: https://patch.msgid.link/20240826084924.368387-3-liaochen4@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Link: https://patch.msgid.link/20240826084924.368387-2-liaochen4@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

When Tegra audio drivers are built as part of the kernel image,
TIMEOUT_ERR is observed from cbb-fabric. Following is seen on
Jetson AGX Orin during boot:

[    8.012482] **************************************
[    8.017423] CPU:0, Error:cbb-fabric, Errmon:2
[    8.021922]    Error Code            : TIMEOUT_ERR
[    8.025966]    Overflow              : Multiple TIMEOUT_ERR
[    8.030644]
[    8.032175]    Error Code            : TIMEOUT_ERR
[    8.036217]    MASTER_ID             : CCPLEX
[    8.039722]    Address               : 0x290a0a8
[    8.043318]    Cache                 : 0x1 -- Bufferable
[    8.047630]    Protection            : 0x2 -- Unprivileged, Non-Secure, Data Access
[    8.054628]    Access_Type           : Write

[    8.106130] WARNING: CPU: 0 PID: 124 at drivers/soc/tegra/cbb/tegra234-cbb.c:604 tegra234_cbb_isr+0x134/0x178

[    8.240602] Call trace:
[    8.243126]  tegra234_cbb_isr+0x134/0x178
[    8.247261]  __handle_irq_event_percpu+0x60/0x238
[    8.252132]  handle_irq_event+0x54/0xb8

These errors happen when MVC device, which is a child of AHUB
device, tries to access its device registers. This happens as
part of call tegra210_mvc_reset_vol_settings() in MVC device
probe().

The root cause of this problem is, the child MVC device gets
probed before the AHUB clock gets enabled. The AHUB clock is
enabled in runtime PM resume of parent AHUB device and due to
the wrong sequence of pm_runtime_enable() in AHUB driver,
runtime PM resume doesn't happen for AHUB device when MVC makes
register access.

Fix this by calling pm_runtime_enable() for parent AHUB device
before of_platform_populate() in AHUB driver. This ensures that
clock becomes available when MVC makes register access.

Fixes: 16e1bcc2 ("ASoC: tegra: Add Tegra210 based AHUB driver")
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Signed-off-by: Ritu Chaudhary <rituc@nvidia.com>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://patch.msgid.link/20240823144342.4123814-3-spujar@nvidia.comSigned-off-by: Mark Brown <broonie@kernel.org>

When using kernel with the following extra config,

  - CONFIG_KASAN=y
  - CONFIG_KASAN_GENERIC=y
  - CONFIG_KASAN_INLINE=y
  - CONFIG_KASAN_VMALLOC=y
  - CONFIG_FRAME_WARN=4096

kernel detects that snd_pcm_suspend_all() access a freed
'snd_soc_pcm_runtime' object when the system is suspended, which
leads to a use-after-free bug:

[   52.047746] BUG: KASAN: use-after-free in snd_pcm_suspend_all+0x1a8/0x270
[   52.047765] Read of size 1 at addr ffff0000b9434d50 by task systemd-sleep/2330

[   52.047785] Call trace:
[   52.047787]  dump_backtrace+0x0/0x3c0
[   52.047794]  show_stack+0x34/0x50
[   52.047797]  dump_stack_lvl+0x68/0x8c
[   52.047802]  print_address_description.constprop.0+0x74/0x2c0
[   52.047809]  kasan_report+0x210/0x230
[   52.047815]  __asan_report_load1_noabort+0x3c/0x50
[   52.047820]  snd_pcm_suspend_all+0x1a8/0x270
[   52.047824]  snd_soc_suspend+0x19c/0x4e0

The snd_pcm_sync_stop() has a NULL check on 'substream->runtime' before
making any access. So we need to always set 'substream->runtime' to NULL
everytime we kfree() it.

Fixes: a72706ed ("ASoC: codec2codec: remove ephemeral variables")
Signed-off-by: robelin <robelin@nvidia.com>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://patch.msgid.link/20240823144342.4123814-2-spujar@nvidia.comSigned-off-by: Mark Brown <broonie@kernel.org>

There are 2G and 4G RAM versions of the Lenovo Yoga Tab 3 X90F and it
turns out that the 2G version has a DMI product name of
"CHERRYVIEW D1 PLATFORM" where as the 4G version has
"CHERRYVIEW C0 PLATFORM". The sys-vendor + product-version check are
unique enough that the product-name check is not necessary.

Drop the product-name check so that the existing DMI match for the 4G
RAM version also matches the 2G RAM version.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240823074305.16873-1-hdegoede@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>

Since commit 13f58267 ("ASoC: soc.h: don't create dummy Component
via COMP_DUMMY()") dummy codecs declared like this:

SND_SOC_DAILINK_DEF(dummy,
        DAILINK_COMP_ARRAY(COMP_DUMMY()));

expand to:

static struct snd_soc_dai_link_component dummy[] = {
};

Which means that dummy is a zero sized array and thus dais[i].codecs should
not be dereferenced *at all* since it points to the address of the next
variable stored in the data section as the "dummy" variable has an address
but no size, so even dereferencing dais[0] is already an out of bounds
array reference.

Which means that the if (dais[i].codecs->name) check added in
commit 7d99a70b ("ASoC: Intel: Boards: Fix NULL pointer deref
in BYT/CHT boards") relies on that the part of the next variable which
the name member maps to just happens to be NULL.

Which apparently so far it usually is, except when it isn't
and then it results in crashes like this one:

[   28.795659] BUG: unable to handle page fault for address: 0000000000030011
...
[   28.795780] Call Trace:
[   28.795787]  <TASK>
...
[   28.795862]  ? strcmp+0x18/0x40
[   28.795872]  0xffffffffc150c605
[   28.795887]  platform_probe+0x40/0xa0
...
[   28.795979]  ? __pfx_init_module+0x10/0x10 [snd_soc_sst_bytcr_wm5102]

Really fix things this time around by checking dais.num_codecs != 0.

Fixes: 7d99a70b ("ASoC: Intel: Boards: Fix NULL pointer deref in BYT/CHT boards")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://patch.msgid.link/20240823074217.14653-1-hdegoede@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>

If the timestamp of a calibration entry is 0 it is an unused entry and
must be ignored.

Some end-products reserve EFI space for calibration entries by shipping
with a zero-filled EFI file. When searching the file for calibration
data the driver must skip the empty entries. The timestamp of a valid
entry is always non-zero.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 1cad8725 ("ASoC: cs-amp-lib: Add helpers for factory calibration data")
Link: https://patch.msgid.link/20240822133544.304421-1-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

For a normal calibration blob the calTarget values must be non-zero and
unique, and the calTime values must be non-zero. Don't rely on
get_random_bytes() to be random enough to guarantee this. Force the
calTarget and calTime values to be valid while retaining randomness
in the values.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 17786231 ("ASoC: cs-amp-lib: Add KUnit test for calibration helpers")
Link: https://patch.msgid.link/20240822115725.259568-1-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add MODULE_DEVICE_TABLE(), so modules could be properly
autoloaded based on the alias from platform_device_id table.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://patch.msgid.link/20240821061955.2273782-3-lihongbo22@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add MODULE_DEVICE_TABLE(), so modules could be properly
autoloaded based on the alias from platform_device_id table.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://patch.msgid.link/20240821061955.2273782-2-lihongbo22@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

When ACP is not powered on by default, acp power on sequence explicitly
invoked by programming pgfsm control mask. The existing implementation
checks the same PGFSM status mask and programs the same PGFSM control mask
in all ACP variants which breaks acp power on sequence for ACP6.0 and
ACP6.3 variants. So to fix this issue, update ACP pgfsm control mask and
status mask based on acp descriptor rev field, which will vary based on
acp variant.

Fixes: 846aef1d ("ASoC: SOF: amd: Add Renoir ACP HW support")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20240816070328.610360-1-Vijendar.Mukunda@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from platform_device_id table.

Fixes: 9d8a7be8 ("ASoC: amd: acp: Add legacy sound card support for Chrome audio")
Signed-off-by: Yuntao Liu <liuyuntao12@huawei.com>
Link: https://patch.msgid.link/20240815084923.756476-1-liuyuntao12@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add AFE Control Register 0 to the volatile_register.
AFE_DAC_CON0 can be modified by both the SOF and ALSA drivers.
If this register is read and written in cache mode, the cached value
might not reflect the actual value when the register is modified by
another driver. It can cause playback or capture failures. Therefore,
it is necessary to add AFE_DAC_CON0 to the list of volatile registers.
Signed-off-by: YR Yang <yr.yang@mediatek.com>
Reviewed-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://patch.msgid.link/20240801084326.1472-1-yr.yang@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

The device never comes online from a reset/shutdown state, because the
driver de-asserts reset GPIO when requesting it but then, at the end of
probe() through wcd937x_reset(), leaves it asserted.

Cc: stable@vger.kernel.org
Fixes: 9be3ec19 ("ASoC: codecs: wcd937x: add wcd937x codec driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240806114913.40022-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Add Google Dojo compatible.
Signed-off-by: Albert Jakieła <jakiela@google.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20240809135627.544429-1-jakiela@google.comSigned-off-by: Mark Brown <broonie@kernel.org>

There was no active maintenance from Banajit Goswami - last email is
from 2019 - so make obvious that Qualcomm sound drivers are maintained
by only one person.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240730103511.21728-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Addition of 'dsp_intr_base' to ACP error register offsets points to
wrong register offsets in irq handler. Correct the acp error register
offsets. ACP error status register offset and acp error reason register
offset got changed from ACP6.0 onwards. Add 'acp_error_stat' and
'acp_sw0_i2s_err_reason' as descriptor fields in sof_amd_acp_desc
structure and update the values based on the ACP variant.
>From Rembrandt platform onwards, errors related to SW1 Soundwire manager
instance/I2S controller connected on P1 power tile is reported with
ACP_SW1_I2S_ERROR_REASON register. Add conditional check for the same.

Fixes: 96eb8185 ("ASoC: SOF: amd: add interrupt handling for SoundWire manager devices")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20240813105944.3126903-2-Vijendar.Mukunda@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

The existing code modifies IRAM and DRAM size after sha dma start for
vangogh platform. The problem with this sequence is that it might cause
sha dma failure when firmware code binary size is greater than the default
IRAM size. To fix this issue, Move the iram-dram fence register sequence
prior to sha dma start.

Fixes: 094d1176 ("ASoC: SOF: amd: Skip IRAM/DRAM size modification for Steam Deck OLED")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20240813105944.3126903-1-Vijendar.Mukunda@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Dmitry Baryshkov <dmitry.baryshkov@linaro.org>:

While debugging broken audio issues on some of Qualcomm platforms I
stumbled upon the kernel not providing the actual error information.
It prints an error from the wsa_macro driver, but the actual issue is in
the VA macro driver. Add error message to point to the actual error
location.

va_macro 3370000.codec: Unknown VA Codec version, ID: 00 / 0f / 00
wsa_macro 3240000.codec: Unsupported Codec version (0)

Device tuning files made with early revision tooling may contain
configuration that can unmask IRQ signals that are owned by the host.

Adding a safe default to the regmap patch ensures that the hardware
matches the driver expectations.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/20240807142648.46932-1-simont@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

With PREEMPT_RT enabled a spinlock_t becomes a sleeping lock.

This is usually not a problem with spinlocks used in IRQ context since
IRQ handlers get threaded. However, if IRQF_ONESHOT is set, the primary
handler won't be force-threaded and runs always in hardirq context. This is
a problem because spinlock_t requires a preemptible context on PREEMPT_RT.

In this particular instance, regmap mmio uses spinlock_t to protect the
register access and IRQF_ONESHOT is set on the IRQ. In this case, it is
actually better to do everything in threaded handler and it solves the
problem with PREEMPT_RT.
Reported-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Closes: https://lore.kernel.org/linux-amlogic/20240729131652.3012327-1-avkrasnov@salutedevices.comSuggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Fixes: b11d2666 ("ASoC: meson: axg-fifo: use threaded irq to check periods")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20240807162705.4024136-1-jbrunet@baylibre.comSigned-off-by: Mark Brown <broonie@kernel.org>

Now that most kernel work on sound has moved over to the linux-sound
mailing list so should the Cirrus Logic audio parts.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20240807140140.421359-1-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

The reset GPIO of WCD9390/WCD9395 is active low and that's how it is
routed on typical boards, so correct the example DTS to use expected
polarity, instead of IRQ flag (which is a logical mistake on its own).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240806114931.40090-4-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The reset GPIO of WCD9380/WCD9385 is active low and that's how it is
routed on typical boards, so correct the example DTS to use expected
polarity.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240806114931.40090-3-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The reset GPIO of WCD9340/WCD9341 is active low and that's how it is
routed on typical boards, so correct the example DTS to use expected
polarity.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240806114931.40090-2-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The reset GPIO of WCD9370/WCD9375 is active low and that's how it is
routed on typical boards, so correct the example DTS to use expected
polarity.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240806114931.40090-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Fix the missing mic on OMEN by HP Gaming Laptop 16-n0xxx by adding the
quirk entry with the board ID 8A44.

Cc: stable@vger.kernel.org
Link: https://bugzilla.suse.com/show_bug.cgi?id=1227182Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240807170249.16490-1-tiwai@suse.deSigned-off-by: Mark Brown <broonie@kernel.org>

We find that we need to set snd_jack_types to 0. If not,
there will be a probability of button detection errors
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://patch.msgid.link/20240807025356.24904-2-zhangyi@everest-semi.comSigned-off-by: Mark Brown <broonie@kernel.org>

Lenovo Thinkpad E14 Gen 6 (model type 21M3)
needs a quirk entry for internal mic to work.
Signed-off-by: Krzysztof Stępniak <kfs.szk@gmail.com>
Link: https://patch.msgid.link/20240807001219.1147-1-kfs.szk@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>