- 15 Oct, 2021 23 commits
-
-
Dmitry Baryshkov authored
The DSI host might be left in some state by the bootloader. If this state generates an IRQ, it might hang the system by holding the interrupt line before the driver sets up the DSI host to the known state. Move the request_irq into msm_dsi_host_init and pass IRQF_NO_AUTOEN to it. Call enable/disable_irq after msm_dsi_host_power_on/_off() functions, so that we can be sure that the interrupt is delivered when the host is in the known state. It is not possible to defer the interrupt enablement to a later point, because drm_panel_prepare might need to communicate with the panel over the DSI link and that requires working interrupt. Fixes: a689554b ("drm/msm: Initial add DSI connector support") Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by:
Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20211002010830.647416-1-dmitry.baryshkov@linaro.orgSigned-off-by:
Rob Clark <robdclark@chromium.org>
-
Vladimir Lypak authored
MDP version v1.16 is almost identical to v1.15 with most significant difference being presence of second DSI interface. MDP v1.16 is found on SoCs such as MSM8x53, SDM450, SDM632 (All with Adreno 506). Signed-off-by:
Vladimir Lypak <vladimir.lypak@gmail.com> Signed-off-by:
Sireesh Kodali <sireeshkodali1@gmail.com> Reviewed-by:
-
Vladimir Lypak authored
Add phy configuration for 14nm dsi phy found on MSM8953 SoC. Only difference from existing configurations are io_start addresses. Signed-off-by:
-
Sireesh Kodali authored
SoCs based on the MSM8953 platform use the 14nm DSI PHY driver Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210928131929.18567-2-sireeshkodali1@gmail.comSigned-off-by:
-
Wang Qing authored
dev_pm_opp_find_freq_exact never return null but ERR_PTR(),so we should use IS_ERR() to clarify and avoid compilation warnings. Signed-off-by:
Wang Qing <wangqing@vivo.com> Link: https://lore.kernel.org/r/1604630714-6163-1-git-send-email-wangqing@vivo.comSigned-off-by:
-
Deepak R Varma authored
Using DEFINE_DEBUGFS_ATTRIBUTE macro with debugfs_create_file_unsafe() function in place of the debugfs_create_file() function will make the file operation struct "reset" aware of the file's lifetime. Additional details here: https://lists.archive.carbon60.com/linux/kernel/2369498 Issue reported by Coccinelle script: scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci Signed-off-by:
Deepak R Varma <mh12gx2825@gmail.com> Link: https://lore.kernel.org/r/9ca2c2e4cbd9ebb282b90f742305fd9b481aacc2.1603998014.git.mh12gx2825@gmail.comSigned-off-by:
-
Bernard authored
Delete the conversion from bool value to bool function return. Signed-off-by:
Bernard Zhao <bernard@vivo.com> Link: https://lore.kernel.org/r/AI*ANACSDfnjQejyeNXUnKoQ.1.1604995827401.Hmail.bernard@vivo.comSigned-off-by:
-
Xu Wang authored
Because clk_prepare_enable() and clk_disable_unprepare() already checked NULL clock parameter, so the additional checks are unnecessary, just remove them. Signed-off-by:
Xu Wang <vulab@iscas.ac.cn> Reviewed-by:
-
Xu Wang authored
Because clk_prepare_enable() and clk_disable_unprepare() already checked NULL clock parameter, so the additional checks are unnecessary, just remove them. Signed-off-by:
-
Xu Wang authored
Because clk_prepare_enable() and clk_disable_unprepare() already checked NULL clock parameter, so the additional checks are unnecessary, just remove them. Signed-off-by:
-
Bernard Zhao authored
Fix sparse warning: drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:1195:41: warning: Using plain integer as NULL pointer drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:1348:32: warning: Using plain integer as NULL pointer Signed-off-by:
-
Tim Gardner authored
Coverity complains of a possible NULL dereference: CID 120718 (#1 of 1): Dereference null return value (NULL_RETURNS) 23. dereference: Dereferencing a pointer that might be NULL state->bos when calling msm_gpu_crashstate_get_bo. [show details] 301 msm_gpu_crashstate_get_bo(state, submit->bos[i].obj, 302 submit->bos[i].iova, submit->bos[i].flags); Fix this by employing the same state->bos NULL check as is used in the next for loop. Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Signed-off-by:Tim Gardner <tim.gardner@canonical.com> Reviewed-by:
-
Colin Ian King authored
The variable bpp is being initialized with a value that is never read, it is being updated later on in both paths of an if statement. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Reviewed-by:
-
Rob Clark authored
These aren't used. And if we add use for them later, we should probably do something a bit more structured than string parsing. Signed-off-by:
-
Rob Clark authored
For now, since we have a mix of bridges which support this flag, which which do *not* support this flag, or work both ways, try it once with NO_CONNECTOR and then fall back to the old way if that doesn't work. Eventually we can drop the fallback path. v2: Add missing drm_connector_attach_encoder() so display actually comes up when the bridge properly handles the NO_CONNECTOR flag Signed-off-by:Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
-
Rikard Falkeborn authored
The only usage of hdmi_8996_pll_ops is to assign its address to the ops field in the clk_init_data struct, and the only usage of pll_init is to assign its address to the init field in the clk_hw struct, both which are pointers to const. Make them const to allow the compiler to put them in read-only memory. Signed-off-by:
Rikard Falkeborn <rikard.falkeborn@gmail.com> Reviewed-by:
-
Marijn Suijten authored
div_u64_rem provides the result of the division and additionally the remainder; don't use this function to solely calculate the remainder while calculating the division again with div_u64. A similar improvement was applied earlier to the 10nm pll in 5c191fef ("drm/msm/dsi_pll_10nm: Fix dividing the same numbers twice"). Signed-off-by:
Marijn Suijten <marijn.suijten@somainline.org> Reviewed-By:
AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20211011201642.167700-1-marijn.suijten@somainline.orgSigned-off-by:
-
zhaoxiao authored
Address the following checkpatch errors: ERROR: do not initialise statics to false FILE: :drivers/gpu/drm/msm/msm_drv.c:21: -static bool reglog = false; FILE: :drivers/gpu/drm/msm/msm_drv.c:31: -bool dumpstate = false; Signed-off-by:
zhaoxiao <long870912@gmail.com> Link: https://lore.kernel.org/r/20210906064315.4975-1-long870912@gmail.comSigned-off-by:
-
Chi Minghao authored
Fix the following coccicheck REVIEW: ./drivers/gpu/drm/msm/edp/edp_ctrl.c:1245:5-8 Unneeded variable Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Chi Minghao <chi.minghao@zte.com.cn> Reviewed-by:
Lyude Paul <lyude@redhat.com> Reviewed-by:
-
Mark Yacoub authored
[why] vsync_cnt atomic counter increments for every hw vsync. On the other hand, frame count is a register that increments when the frame gets actually pushed out. We cannnot read this register whenever the timing engine is off, but vblank counter should still return a valid number. This behavior also matches the downstream driver. [How] Read the encoder vsync count instead of the dpu_encoder_phys frame count. Suggested-by:
Mark Yacoub <markyacoub@chromium.org> Reviewed-by:
-
Dmitry Baryshkov authored
As dpu_core_irq was merged into dpu_hw_intr, merge data structures too, removing the need for a separate data structure. Signed-off-by:
-
Dmitry Baryshkov authored
We already clear the IRQ status register before processing IRQs, so do not clear the register again. Especially do not clear the IRQ status _after_ processing the IRQ as this way we can loose the event. Signed-off-by:
-
Dmitry Baryshkov authored
With dpu_core_irq being the wrapper around dpu_hw_interrupts, there is little sense in having them separate. Squash them together to remove another layer of abstraction (hw_intr ops). Signed-off-by:
-
- 12 Oct, 2021 13 commits
-
-
Dan Carpenter authored
This disables a lock which wasn't enabled and it does not disable the first lock in the array. Fixes: 6e0eb52e ("drm/msm/dsi: Parse bus clocks from a list") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Dan Carpenter authored
Return an error code if msm_dsi_manager_validate_current_config(). Don't return success. Fixes: 8b03ad30 ("drm/msm/dsi: Use one connector for dual DSI mode") Signed-off-by:
-
Marijn Suijten authored
The downstream driver models this PLL lock check as an if-elseif-else. The only way to reach the else case where pll_locked=true [1] is by succeeding both readl_poll_timeout_atomic calls (which return zero on success) in the if _and_ elseif condition. Hence both the "lock" and "ready" bit need to be tested in the SM_READY_STATUS register before considering the PLL locked and ready to go. Tested on the Sony Xperia XA2 Ultra (nile-discovery, sdm630). [1]: https://source.codeaurora.org/quic/la/kernel/msm-4.19/tree/drivers/clk/qcom/mdss/mdss-dsi-pll-14nm-util.c?h=LA.UM.9.2.1.r1-08000-sdm660.0#n302 Fixes: f079f6d9 ("drm/msm/dsi: Add PHY/PLL for 8x96") Signed-off-by:
-
Dmitry Baryshkov authored
The commit 9f91f22a ("drm/msm/dsi: remove duplicate fields from dsi_pll_Nnm instances") mistakenly changed registered clock names. While the platform is in progress of migration to using clock properties in the dts rather than the global clock names, we should provide backwards compatibility. Thus restore registerd global clock names. Fixes: 9f91f22a ("drm/msm/dsi: remove duplicate fields from dsi_pll_Nnm instances") Signed-off-by:
-
Robert Foss authored
Both PINGPONG4 and PINGPONG5 IRQ registers are using the same address, which is incorrect. PINGPONG4 should use the register offset 30, and PINGPONG5 should use the register offset 31 according to the downstream driver. Fixes: 667e9985 ("drm/msm/dpu: replace IRQ lookup with the data in hw catalog") Signed-off-by:
Robert Foss <robert.foss@linaro.org> Reviewed-by:
-
Fabio Estevam authored
Since commit 98659487 ("drm/msm: add support to take dpu snapshot") the following NULL pointer dereference is seen on i.MX53: [ 3.275493] msm msm: bound 30000000.gpu (ops a3xx_ops) [ 3.287174] [drm] Initialized msm 1.8.0 20130625 for msm on minor 0 [ 3.293915] 8<--- cut here --- [ 3.297012] Unable to handle kernel NULL pointer dereference at virtual address 00000028 [ 3.305244] pgd = (ptrval) [ 3.307989] [00000028] *pgd=00000000 [ 3.311624] Internal error: Oops: 805 [#1] SMP ARM [ 3.316430] Modules linked in: [ 3.319503] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.14.0+g682d702b426b #1 [ 3.326652] Hardware name: Freescale i.MX53 (Device Tree Support) [ 3.332754] PC is at __mutex_init+0x14/0x54 [ 3.336969] LR is at msm_disp_snapshot_init+0x24/0xa0 i.MX53 does not use the DPU controller. Fix the problem by only calling msm_disp_snapshot_init() on platforms that use the DPU controller. Cc: stable@vger.kernel.org Fixes: 98659487 ("drm/msm: add support to take dpu snapshot") Signed-off-by:
Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20210914174831.2044420-1-festevam@gmail.comSigned-off-by:
-
Dan Carpenter authored
These error paths returned 1 on failure, instead of a negative error code. This would lead to an Oops in the caller. A second problem is that the check for "if (ret != -ENODATA)" did not work because "ret" was set to 1. Fixes: 5785dd7a ("drm/msm: Fix duplicate gpu node in icc summary") Signed-off-by:
-
Dan Carpenter authored
This code returns 1 on error instead of a negative error. It leads to an Oops in the caller. A second problem is that the check for "if (ret != -ENODATA)" cannot be true because "ret" is set to 1. Fixes: 5785dd7a ("drm/msm: Fix duplicate gpu node in icc summary") Signed-off-by:
-
Colin Ian King authored
The initialization of pointer dev dereferences pointer edp before edp is null checked, so there is a potential null pointer deference issue. Fix this by only dereferencing edp after edp has been null checked. Addresses-Coverity: ("Dereference before null check") Fixes: ab5b0107 ("drm/msm: Initial add eDP support in msm drm driver (v5)") Signed-off-by: -
Dmitry Baryshkov authored
Since f35a2a99 ("drm/encoder: make encoder control functions optional") drm_mode_config_validate would print warnings if both cursor plane and cursor functions are provided. Restore separate set of drm_crtc_funcs to be used if separate cursor plane is provided. [ 6.556046] ------------[ cut here ]------------ [ 6.556071] [CRTC:93:crtc-0] must not have both a cursor plane and a cursor_set func [ 6.556091] WARNING: CPU: 1 PID: 76 at drivers/gpu/drm/drm_mode_config.c:648 drm_mode_config_validate+0x238/0x4d0 [ 6.567453] Modules linked in: [ 6.577604] CPU: 1 PID: 76 Comm: kworker/u8:2 Not tainted 5.15.0-rc1-dirty #43 [ 6.580557] Hardware name: Qualcomm Technologies, Inc. DB820c (DT) [ 6.587763] Workqueue: events_unbound deferred_probe_work_func [ 6.593926] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 6.599740] pc : drm_mode_config_validate+0x238/0x4d0 [ 6.606596] lr : drm_mode_config_validate+0x238/0x4d0 [ 6.611804] sp : ffff8000121b3980 [ 6.616838] x29: ffff8000121b3990 x28: 0000000000000000 x27: 0000000000000001 [ 6.620140] x26: ffff8000114cde50 x25: ffff8000114cdd40 x24: ffff0000987282d8 [ 6.627258] x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000001 [ 6.634376] x20: ffff000098728000 x19: ffff000080a39000 x18: ffffffffffffffff [ 6.641494] x17: 3136564e3631564e x16: 0000000000000324 x15: ffff800011c78709 [ 6.648613] x14: 0000000000000000 x13: ffff800011a22850 x12: 00000000000009ab [ 6.655730] x11: 0000000000000339 x10: ffff800011a22850 x9 : ffff800011a22850 [ 6.662848] x8 : 00000000ffffefff x7 : ffff800011a7a850 x6 : ffff800011a7a850 [ 6.669966] x5 : 000000000000bff4 x4 : 40000000fffff339 x3 : 0000000000000000 [ 6.677084] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00008093b800 [ 6.684205] Call trace: [ 6.691319] drm_mode_config_validate+0x238/0x4d0 [ 6.693577] drm_dev_register+0x17c/0x210 [ 6.698435] msm_drm_bind+0x4b4/0x694 [ 6.702429] try_to_bring_up_master+0x164/0x1d0 [ 6.706075] __component_add+0xa0/0x170 [ 6.710415] component_add+0x14/0x20 [ 6.714234] msm_hdmi_dev_probe+0x1c/0x2c [ 6.718053] platform_probe+0x68/0xe0 [ 6.721959] really_probe.part.0+0x9c/0x30c [ 6.725606] __driver_probe_device+0x98/0x144 [ 6.729600] driver_probe_device+0xc8/0x15c [ 6.734114] __device_attach_driver+0xb4/0x120 [ 6.738106] bus_for_each_drv+0x78/0xd0 [ 6.742619] __device_attach+0xdc/0x184 [ 6.746351] device_initial_probe+0x14/0x20 [ 6.750172] bus_probe_device+0x9c/0xa4 [ 6.754337] deferred_probe_work_func+0x88/0xc0 [ 6.758158] process_one_work+0x1d0/0x370 [ 6.762671] worker_thread+0x2c8/0x470 [ 6.766839] kthread+0x15c/0x170 [ 6.770483] ret_from_fork+0x10/0x20 [ 6.773870] ---[ end trace 5884eb76cd26d274 ]--- [ 6.777500] ------------[ cut here ]------------ [ 6.782043] [CRTC:93:crtc-0] must not have both a cursor plane and a cursor_move func [ 6.782063] WARNING: CPU: 1 PID: 76 at drivers/gpu/drm/drm_mode_config.c:654 drm_mode_config_validate+0x290/0x4d0 [ 6.794362] Modules linked in: [ 6.804600] CPU: 1 PID: 76 Comm: kworker/u8:2 Tainted: G W 5.15.0-rc1-dirty #43 [ 6.807555] Hardware name: Qualcomm Technologies, Inc. DB820c (DT) [ 6.816148] Workqueue: events_unbound deferred_probe_work_func [ 6.822311] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 6.828126] pc : drm_mode_config_validate+0x290/0x4d0 [ 6.834981] lr : drm_mode_config_validate+0x290/0x4d0 [ 6.840189] sp : ffff8000121b3980 [ 6.845223] x29: ffff8000121b3990 x28: 0000000000000000 x27: 0000000000000001 [ 6.848525] x26: ffff8000114cde50 x25: ffff8000114cdd40 x24: ffff0000987282d8 [ 6.855643] x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000001 [ 6.862763] x20: ffff000098728000 x19: ffff000080a39000 x18: ffffffffffffffff [ 6.869879] x17: 3136564e3631564e x16: 0000000000000324 x15: ffff800011c790c2 [ 6.876998] x14: 0000000000000000 x13: ffff800011a22850 x12: 0000000000000a2f [ 6.884116] x11: 0000000000000365 x10: ffff800011a22850 x9 : ffff800011a22850 [ 6.891234] x8 : 00000000ffffefff x7 : ffff800011a7a850 x6 : ffff800011a7a850 [ 6.898351] x5 : 000000000000bff4 x4 : 40000000fffff365 x3 : 0000000000000000 [ 6.905470] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00008093b800 [ 6.912590] Call trace: [ 6.919702] drm_mode_config_validate+0x290/0x4d0 [ 6.921960] drm_dev_register+0x17c/0x210 [ 6.926821] msm_drm_bind+0x4b4/0x694 [ 6.930813] try_to_bring_up_master+0x164/0x1d0 [ 6.934459] __component_add+0xa0/0x170 [ 6.938799] component_add+0x14/0x20 [ 6.942619] msm_hdmi_dev_probe+0x1c/0x2c [ 6.946438] platform_probe+0x68/0xe0 [ 6.950345] really_probe.part.0+0x9c/0x30c [ 6.953991] __driver_probe_device+0x98/0x144 [ 6.957984] driver_probe_device+0xc8/0x15c [ 6.962498] __device_attach_driver+0xb4/0x120 [ 6.966492] bus_for_each_drv+0x78/0xd0 [ 6.971004] __device_attach+0xdc/0x184 [ 6.974737] device_initial_probe+0x14/0x20 [ 6.978556] bus_probe_device+0x9c/0xa4 [ 6.982722] deferred_probe_work_func+0x88/0xc0 [ 6.986543] process_one_work+0x1d0/0x370 [ 6.991057] worker_thread+0x2c8/0x470 [ 6.995223] kthread+0x15c/0x170 [ 6.998869] ret_from_fork+0x10/0x20 [ 7.002255] ---[ end trace 5884eb76cd26d275 ]--- Fixes: aa649e87 ("drm/msm/mdp5: mdp5_crtc: Restore cursor state only if LM cursors are enabled") Signed-off-by:
-
Marek Vasut authored
The return type of ktime_divns() is s64. The timeout_to_jiffies() currently assigns the result of this ktime_divns() to unsigned long, which on 32 bit systems may overflow. Furthermore, the result of this function is sometimes also passed to functions which expect signed long, dma_fence_wait_timeout() is one such example. Fix this by adjusting the type of remaining_jiffies to s64, so we do not suffer overflow there, and return a value limited to range of 0..INT_MAX, which is safe for all usecases of this timeout. The above overflow can be triggered if userspace passes in too large timeout value, larger than INT_MAX / HZ seconds. The kernel detects it and complains about "schedule_timeout: wrong timeout value %lx" and generates a warning backtrace. Note that this fixes commit 6cedb8b3 ("drm/msm: avoid using 'timespec'"), because the previously used timespec_to_jiffies() function returned unsigned long instead of s64: static inline unsigned long timespec_to_jiffies(const struct timespec *value) Fixes: 6cedb8b3 ("drm/msm: avoid using 'timespec'") Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Jordan Crouse <jcrouse@codeaurora.org> Cc: Rob Clark <robdclark@chromium.org> Cc: stable@vger.kernel.org # 5.6+ Acked-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
Stephan Gerhold authored
There is no devfreq on a3xx at the moment since gpu_busy is not implemented. This means that msm_devfreq_init() will return early and the entire devfreq setup is skipped. However, msm_devfreq_active() and msm_devfreq_idle() are still called unconditionally later, causing a NULL pointer dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 Internal error: Oops: 96000004 [#1] PREEMPT SMP CPU: 0 PID: 133 Comm: ring0 Not tainted 5.15.0-rc1 #4 Hardware name: Longcheer L8150 (DT) pc : mutex_lock_io+0x2bc/0x2f0 lr : msm_devfreq_active+0x3c/0xe0 [msm] Call trace: mutex_lock_io+0x2bc/0x2f0 msm_gpu_submit+0x164/0x180 [msm] msm_job_run+0x54/0xe0 [msm] drm_sched_main+0x2b0/0x4a0 [gpu_sched] kthread+0x154/0x160 ret_from_fork+0x10/0x20 Fix this by adding a check in msm_devfreq_active/idle() which ensures that devfreq was actually initialized earlier. Fixes: 9bc95570 ("drm/msm: Devfreq tuning") Reported-by:
Nikita Travkin <nikita@trvn.ru> Tested-by:
Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20210913164556.16284-1-stephan@gerhold.netSigned-off-by:
-
Kuogee Hsieh authored
Currently there is audio not working problem after system resume from suspend if hdmi monitor stay plugged in at DUT. However this problem does not happen at normal operation but at a particular test case. The root cause is DP driver signal audio with connected state at resume which trigger audio trying to setup audio data path through DP main link but failed due to display port is not setup and enabled by upper layer framework yet. This patch only have DP driver signal audio only when DP is in disconnected state so that audio option shows correct state after system resume. DP driver will not signal audio with connected state until display enabled executed by upper layer framework where display port is setup completed and main link is running. Changes in V2: -- add details commit text Fixes: afc9b8b6 ("drm/msm/dp: signal audio plugged change at dp_pm_resume") Signed-off-by:
Kuogee Hsieh <khsieh@codeaurora.org> Reviewed-by:
-
- 01 Oct, 2021 4 commits
-
-
Arnd Bergmann authored
The overflow check does causes a warning from clang-14 when 'sz' is a type that is smaller than size_t: drivers/gpu/drm/msm/msm_gem_submit.c:217:10: error: result of comparison of constant 18446744073709551615 with expression of type 'unsigned int' is always false [-Werror,-Wtautological-constant-out-of-range-compare] if (sz == SIZE_MAX) { Change the type accordingly. Fixes: 20224d71 ("drm/msm/submit: Move copy_from_user ahead of locking bos") Signed-off-by: -
Rob Clark authored
Some userspace apps make assumptions that rendering against multiple contexts within the same process (from the same thread, with appropriate MakeCurrent() calls) provides sufficient synchronization without any external synchronization (ie. glFenceSync()/glWaitSync()). Since a submitqueue maps to a gl/vk context, having multiple sched entities of the same priority only works with implicit sync enabled. To fix this, limit things to a single sched entity per priority level per process. An alternative would be sharing submitqueues between contexts in userspace, but tracking of per-context faults (ie. GL_EXT_robustness) is already done at the submitqueue level, so this is not an option. Signed-off-by: -
Rob Clark authored
msm_file_private is more gpu related, and in the next commit it will need access to other GPU specific #defines. While we're at it, add some comments. Signed-off-by: -
Rob Clark authored
In theory a context can be destroyed and a new one allocated at the same address, making the pointer comparision to detect when we don't need to update the current pagetables invalid. Instead assign a sequence number to each context on creation, and use this for the check. Fixes: 84c31ee1 ("drm/msm/a6xx: Add support for per-instance pagetables") Signed-off-by:
-
