- 03 Nov, 2004 15 commits
-
-
Herbert Xu authored
It is updated outside of locks, so... Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
Collaborative work between David S. Miller and Herbert Xu. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
bk://kernel.bkbits.net/acme/net-headers-2.6David S. Miller authored
into nuts.davemloft.net:/disk1/BK/net-2.6
-
Thomas Graf authored
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Graf authored
Transforms old policer to use generic statistic via TCA_STATS2 and maintain backward compatibility via TCA_STATS. Adds a new API for classifiers to invoke the dumping process. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Graf authored
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Graf authored
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Graf authored
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Graf authored
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Graf authored
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Graf authored
Dumps the statistic common to all action modules via the newly introduced TLV type TCA_ACT_STATS in tcf_action_copy_stats but allows the corresponding module to dump its own statistic by implementing the get_stats callback. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tommy Christensen authored
Based upon a patch from Herbert Xu: > Hi Ingo: > > Your recent fix to dev_queue_xmit moved the local_bh_disable to > include stuff like skb_linearize and skb_checksum_help. These > are potentially expensive operations. Since they don't need to > run with preempt off, we could simply move the local_bh_enable > up instead. No, this breaks the normal return path. How about this instead? Signed-off-by: Tommy S. Christensen <tommy.christensen@tpack.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
This patch allows tcpdiag to support ipv6 work as a module when itself is also a module. I was planning for a more extensible method but now I think the effort would be better directed at a new generic socket netlink interface than the TCP-specific tcpdiag. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hideaki Yoshifuji authored
Signed-off-by: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 02 Nov, 2004 25 commits
-
-
Benjamin Herrenschmidt authored
The new atyfb has the return value for the Power Management routine wrong. This prevents sleep from working on PowerBooks with mach64 video chips. This fixes it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Benjamin Herrenschmidt authored
XFree (and X.org) has both always been broken in their conversion of the DPMS blanking mode when passing to the kernel ioctl FBIOBLANK (in fbdev mode). This patch makes sure that at least the value passed by userland stays in the legal range, which has the side effect that an X DPMS POWERDOWN request will result as an fbdev VESA_POWERDOWN request at the fbdev level now, instead of an out-of-range value. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Matthew Wilcox authored
Small tweaks to the checksumming routines Fix a corner case in csum_partial Committed-by: Randolph Chung <tausq@parisc-linux.org>
-
Matthew Wilcox authored
Superio cleanup Committed-by: Grant Grundler <grundler@parisc-linux.org>
-
Matthew Wilcox authored
The default interruption handler "handle_interruption" does not properly check to see if the faulting space is the same as the users space. The problem lies in the fact that if a fault happens on the gateway we will not deliver signals to the process, the process will not die, and we may continue handling the same fault in a loop forever. Any malicious user code can crash the kernel by jumping into the gateway page at an inopportune address. The solution is to check if the user has the right privilege and if the spaces match, both faulting and currently active. The best action is to force the process back to it's own space of execution at address zero, and let it take a SIGSEGV. The process can never recover from this because it happens immediately after the return from the interrupt via rfi or rfir. Committed-by: Carlos O'Donell <carlos@parisc-linux.org>
-
Matthew Wilcox authored
Add new syscalls: tkill, waitid, fadvise64_64, set_tid_address, tgkill, mbind, [sg]et_mempolicy, {,l,f}{set,get,list,remove}xattr, timer_{create,settime,gettime,getoverrun,delete}, clock_{settime,gettime,getres,nanosleep} Committed-by: Matthew Wilcox <willy@parisc-linux.org>
-
Matthew Wilcox authored
PTRACE_GETEVENTMSG was not 64-bit clean, fix it Committed-by: Randolph Chung <tausq@parisc-linux.org>
-
Matthew Wilcox authored
remove the now unused lcopy_*_user routines Committed-by: Randolph Chung <tausq@parisc-linux.org>
-
Matthew Wilcox authored
Stop exporting the old memcpy symbols Committed-by: Randolph Chung <tausq@parisc-linux.org>
-
Matthew Wilcox authored
dump the stack on a BUG() Committed-by: Randolph Chung <tausq@parisc-linux.org>
-
Matthew Wilcox authored
register cpus with sysfs Committed-by: Randolph Chung <tausq@parisc-linux.org>
-
Matthew Wilcox authored
- new memcpy routine, replaces memcpy, bcopy, copy_{from,to,in}_user implementations - workaround gcc-3.0 limitations for asm() - Pip and Rufus pointed out the flaw in the current misaligned memcopy routines. Randolph now owes lots of Milk bones. - updates to work with testsuite - sparse annotations - Improve copy performance for small and unaligned copies - Enable merge optimization for non-PA20 builds too Committed-by: Randolph Chung <tausq@parisc-linux.org> Committed-by: James Bottomley <jejb@parisc-linux.org>
-
Matthew Wilcox authored
fix CONFIG_DISCONTIGMEM support Committed-by: Randolph Chung <tausq@parisc-linux.org>
-
Matthew Wilcox authored
- Fix Astro/Elroy LMMIO space reporting in /proc/iomem. - Output in /proc/iomem include PCI bus number and "Extra LMMIO" range. - LBA now reports proper addresses routed down from SBA. - add mercury_cfg_ops. This fixes the tg3 init delay problem. PDC took ~20ms per PCI cfg write. tg3 performs ~1600 writes (~30 seconds per NIC) during init. Alternative is the relocate PDC to host ram. But that would burn ~4MB of RAM. This is cheaper. - add PCI_F_EXTEND to asm/pci.h - replaces private definitions Committed-by: Grant Grundler <grundler@parisc-linux.org>
-
Matthew Wilcox authored
Add memory clobber to userspace syscall wrapper provided by kernel, this matches glibc definition. Committed-by: Carlos O'Donell <carlos@parisc-linux.org>
-
Matthew Wilcox authored
export global fixup routines Committed-by: Randolph Chung <tausq@parisc-linux.org>
-
Matthew Wilcox authored
Revamp exceptions support to use fixup sections Committed-by: Randolph Chung <tausq@parisc-linux.org>
-
bk://bk.arm.linux.org.uk/linux-2.6-serialLinus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
Russell King authored
- linux/8250.h is replaced by linux/serial_8250.h - we now pass serial port information via a platform device.
-
Russell King authored
-
Russell King authored
-
Russell King authored
-
bk://bk.arm.linux.org.uk/linux-2.6-rmkLinus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
Ben Dooks authored
Patch from Ben Dooks Fixes mis-labelled timer variables, and incldes the clock header to allow the code to compile. This was not caught on previous rounds as all the s3c2440 machine support is pending the finalisation of the new s3c2440 uart driver (arriving soon) Signed-off-by: Ben Dooks
-
Ben Dooks authored
Patch from Ben Dooks Select the PCLK based TIMER4 to provide the system timer tick if there is no machine specific timer setup specified. This should make it easier to add new machines, as well as cut down on the code required in time.c when they are added. Signed-off-by: Ben Dooks
-