Node names should not have vendor prefixes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240426123101.500676-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add SMP2P node for the SDX75 platform to communicate with the modem.
Signed-off-by: Kaushal Kumar <quic_kaushalk@quicinc.com>
Link: https://lore.kernel.org/r/20240426112837.17478-1-quic_kaushalk@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add AOSS channel devicetree node for Qcom's SDX75 SoC.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Link: https://lore.kernel.org/r/20240426055326.3141727-7-quic_rohiagar@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add TCSR register space devicetree node for accessing different
status registers.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Link: https://lore.kernel.org/r/20240426055326.3141727-6-quic_rohiagar@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add IPCC devicetree node to Qcom's SDX75 platform.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Link: https://lore.kernel.org/r/20240426055326.3141727-5-quic_rohiagar@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add path of the GPU firmware for the SM8650-HDK board
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240425-topic-sm8650-upstream-hdk-gpu-v1-1-465a11af7441@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add subnode usb_con: extcon for SM5502 / SM5504 MUIC, which will be used
for RT5033 charger.
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240424144922.28189-1-raymondhackley@protonmail.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The phones listed below have Richtek RT5033 PMIC and charger.
Add them to the device trees.

- Samsung Galaxy A3/A5/A7 2015
- Samsung Galaxy E5/E7
- Samsung Galaxy Grand Max
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Link: https://lore.kernel.org/r/20240424143158.24358-1-raymondhackley@protonmail.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add a description of a SM4450 cpufreq-epss controller,add references to
it from CPU nodes and make EPSS a supplyer of clocks for the CPUs.
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240424101503.635364-3-quic_tengfan@quicinc.com
Link: https://lore.kernel.org/r/20240424101503.635364-4-quic_tengfan@quicinc.com
[bjorn: Squashed the two changes, and updated commit message]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

For IDP variant, GPIO 20/21 is used by camera use case and camera
driver is not able acquire these GPIOs as it is acquired by UART5
driver as RTS/CTS pin.

UART5 is designed for debug UART for all the board variants of the
sc7280 chipset and RTS/CTS configuration is not required for debug
uart usecase.

Remove CTS/RTS configuration for UART5 instance and change compatible
string to debug UART.

Remove overwriting compatible property from individual target specific
file as it is not required.

Fixes: 38cd93f4 ("arm64: dts: qcom: sc7280: Update QUPv3 UART5 DT node")
Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
Link: https://lore.kernel.org/r/20240424075853.11445-1-quic_vdadhani@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Enable gpi-dma0, gpi-dma1 and qupv3_id_1 nodes for
buses usecase on RB3gen2.
Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240424054602.5731-1-quic_vdadhani@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The SM8650-HDK is an embedded development platforms for the
Snapdragon 8 Gen 3 SoC aka SM8650, with the following features:
- Qualcomm SM8650 SoC
- 16GiB On-board LPDDR5
- On-board WiFi 7 + Bluetooth 5.3/BLE
- On-board UFS4.0
- M.2 Key B+M Gen3x2 PCIe Slot
- HDMI Output
- USB-C Connector with DP Almode & Audio Accessory mode
- Micro-SDCard Slot
- Audio Jack with Playback and Microphone
- 2 On-board Analog microphones
- 2 On-board Speakers
- 96Boards Compatible Low-Speed and High-Speed connectors [1]
  - For Camera, Sensors and external Display cards
  - Compatible with the Linaro Debug board [2]
- SIM Slot for Modem
- Debug connectors
- 6x On-Board LEDs

Product Page: [3]

[1] https://www.96boards.org/specifications/
[2] https://git.codelinaro.org/linaro/qcomlt/debugboard
[3] https://www.lantronix.com/products/snapdragon-8-gen-3-mobile-hardware-development-kit/Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Tested-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240422-topic-sm8650-upstream-hdk-v4-2-b33993eaa2e8@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Document the Qualcomm SM8650 based HDK (Hardware Development Kit)
embedded development platform designed by Qualcomm and sold by Lantronix [1].

[1] https://www.lantronix.com/products/snapdragon-8-gen-3-mobile-hardware-development-kit/Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240422-topic-sm8650-upstream-hdk-v4-1-b33993eaa2e8@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Qcom SoCs doesn't support legacy PCI, but only PCIe. So use the correct
node name for the controller instances.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240321-pcie-qcom-bridge-dts-v2-21-1eb790c53e43@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The PCIe Gen4x2 PHY found in the SM8650 SoCs have a second clock named
"PHY_AUX_CLK" which is an input of the Global Clock Controller (GCC) which
is muxed & gated then returned to the PHY as an input.

Remove the dummy pcie-1-phy-aux-clk clock and now the pcie1_phy exposes
2 clocks, properly add the pcie1_phy provided clocks to the Global Clock
Controller (GCC) node clocks inputs.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240502-topic-sm8x50-upstream-pcie-1-phy-aux-clk-v5-3-10c650cfeade@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The PCIe Gen4x2 PHY found in the SM8550 SoCs have a second clock named
"PHY_AUX_CLK" which is an input of the Global Clock Controller (GCC) which
is muxed & gated then returned to the PHY as an input.

Remove the dummy pcie-1-phy-aux-clk clock and now the pcie1_phy exposes
2 clocks, properly add the pcie1_phy provided clocks to the Global Clock
Controller (GCC) node clocks inputs.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240502-topic-sm8x50-upstream-pcie-1-phy-aux-clk-v5-2-10c650cfeade@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The PCIe Gen4x2 PHY found in the SM8450 SoCs have a second clock named
"PHY_AUX_CLK" which is an input of the Global Clock Controller (GCC) which
is muxed & gated then returned to the PHY as an input.

Now the pcie1_phy exposes 2 clocks, properly add the pcie1_phy provided
clocks to the Global Clock Controller (GCC) node clocks inputs.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240502-topic-sm8x50-upstream-pcie-1-phy-aux-clk-v5-1-10c650cfeade@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The usb-role-switch property doesn't make sense for the USB hosts which
are fixed to the host USB data mode. Delete usb-role-switch property
from these hosts.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240429-usb-link-dtsi-v1-12-87c341b55cdf@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The usb-role-switch property doesn't make sense for the USB hosts which
are fixed to either host or peripheral USB data mode. Delete
usb-role-switch property being present in SoC dtsi.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240429-usb-link-dtsi-v1-11-87c341b55cdf@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The lanes from the USB-C SS port are connected to the combo USB+DP QMP
PHY rather than the SS port of the USB controller. Move the connection
endpoint to the QMP PHY out port.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240429-usb-link-dtsi-v1-10-87c341b55cdf@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The orientation-switch of the USB+DP QMP PHY is not a property of the
board, it is a design property of the QMP PHY itself. Move the property
from board DTS to SoC DTSI.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240429-usb-link-dtsi-v1-9-87c341b55cdf@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The orientation-switch of the USB+DP QMP PHY is not a property of the
board, it is a design property of the QMP PHY itself. Move the property
from board DTS to SoC DTSI.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240429-usb-link-dtsi-v1-8-87c341b55cdf@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The orientation-switch of the USB+DP QMP PHY is not a property of the
board, it is a design property of the QMP PHY itself. Move the property
from board DTS to SoC DTSI.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240429-usb-link-dtsi-v1-7-87c341b55cdf@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The orientation-switch of the USB+DP QMP PHY is not a property of the
board, it is a design property of the QMP PHY itself. Move the property
from board DTS to SoC DTSI.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240429-usb-link-dtsi-v1-6-87c341b55cdf@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Move the graph connection between USB host, USB SS PHY and DP port to
the SoC dtsi file. They are linked in hardware in this way.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240429-usb-link-dtsi-v1-5-87c341b55cdf@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Move the graph connection between USB host, USB SS PHY and DP port to
the SoC dtsi file. They are linked in hardware in this way.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240429-usb-link-dtsi-v1-4-87c341b55cdf@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Move the graph connection between USB host, USB SS PHY and DP port to
the SoC dtsi file. They are linked in hardware in this way.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240429-usb-link-dtsi-v1-3-87c341b55cdf@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Move the graph connection between USB host, USB SS PHY and DP port to
the SoC dtsi file. They are linked in hardware in this way.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240429-usb-link-dtsi-v1-2-87c341b55cdf@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Move the graph connection between USB host, USB SS PHY and DP port to
the SoC dtsi file. They are linked in hardware in this way.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240429-usb-link-dtsi-v1-1-87c341b55cdf@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Add reset for display subsystem, make sure it gets
properly reset.
Signed-off-by: Barnabás Czémán <trabarni@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240525-mdss-reset-v1-1-c0489e8be0d0@gmail.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The interconnects property was clearly copy-pasted between the 4 PCIe
controllers, giving all four the cpu-pcie path destination of SLAVE_0.

The four ports are all associated with CN0, but update the property for
correctness sake.

Fixes: d20b6c84 ("arm64: dts: qcom: sc8180x: Add PCIe instances")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240525-sc8180x-pcie-interconnect-port-fix-v1-1-f86affa02392@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The #power-domains property is no longer accepted according to the AOSS
QMP binding, drop it from the node.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240525-sc8180x-aop-validation-fix-v1-1-66cfa3c9ccf6@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

The IPA BCM is already exposed by clk-rpmh, remove the interconnect
node for the same.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240525-sc8180x-drop-ipa-icc-v1-1-84ac4cf08fe3@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Enable PMK8350 RTC module that is found on qcs6490-rb3gen2.
Signed-off-by: Umang Chheda <quic_uchheda@quicinc.com>
Link: https://lore.kernel.org/r/20240523131528.3454431-1-quic_uchheda@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

percpu.h depends on smp.h, but doesn't include it directly because of
circular header dependency issues; percpu.h is needed in a bunch of low
level headers.

This fixes a randconfig build error on mips:

  include/linux/alloc_tag.h: In function '__alloc_tag_ref_set':
  include/asm-generic/percpu.h:31:40: error: implicit declaration of function 'raw_smp_processor_id' [-Werror=implicit-function-declaration]
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 24e44cc2 ("mm: percpu: enable per-cpu allocation tagging")
Closes: https://lore.kernel.org/oe-kbuild-all/202405210052.DIrMXJNz-lkp@intel.com/Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'perf-tools-fixes-for-v6.10-1-2024-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tool fix from Arnaldo Carvalho de Melo:
 "Revert a patch causing a regression.

  This made a simple 'perf record -e cycles:pp make -j199' stop working
  on the Ampere ARM64 system Linus uses to test ARM64 kernels".

* tag 'perf-tools-fixes-for-v6.10-1-2024-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
  Revert "perf parse-events: Prefer sysfs/JSON hardware events over legacy"

This reverts commit 617824a7.

This made a simple 'perf record -e cycles:pp make -j199' stop working on
the Ampere ARM64 system Linus uses to test ARM64 kernels, as discussed
at length in the threads in the Link tags below.

The fix provided by Ian wasn't acceptable and work to fix this will take
time we don't have at this point, so lets revert this and work on it on
the next devel cycle.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Cc: Ethan Adams <j.ethan.adams@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Tycho Andersen <tycho@tycho.pizza>
Cc: Yang Jihong <yangjihong@bytedance.com>
Link: https://lore.kernel.org/lkml/CAHk-=wi5Ri=yR2jBVk-4HzTzpoAWOgstr1LEvg_-OXtJvXXJOA@mail.gmail.com
Link: https://lore.kernel.org/lkml/CAHk-=wiWvtFyedDNpoV7a8Fq_FpbB+F5KmWK2xPY3QoYseOf_A@mail.gmail.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Pull smb client fixes from Steve French:

 - two important netfs integration fixes - including for a data
   corruption and also fixes for multiple xfstests

 - reenable swap support over SMB3

* tag '6.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Fix missing set of remote_i_size
  cifs: Fix smb3_insert_range() to move the zero_point
  cifs: update internal version number
  smb3: reenable swapfiles over SMB3 mounts

Merge tag 'mm-hotfixes-stable-2024-05-25-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "16 hotfixes, 11 of which are cc:stable.

  A few nilfs2 fixes, the remainder are for MM: a couple of selftests
  fixes, various singletons fixing various issues in various parts"

* tag 'mm-hotfixes-stable-2024-05-25-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm/ksm: fix possible UAF of stable_node
  mm/memory-failure: fix handling of dissolved but not taken off from buddy pages
  mm: /proc/pid/smaps_rollup: avoid skipping vma after getting mmap_lock again
  nilfs2: fix potential hang in nilfs_detach_log_writer()
  nilfs2: fix unexpected freezing of nilfs_segctor_sync()
  nilfs2: fix use-after-free of timer for log writer thread
  selftests/mm: fix build warnings on ppc64
  arm64: patching: fix handling of execmem addresses
  selftests/mm: compaction_test: fix bogus test success and reduce probability of OOM-killer invocation
  selftests/mm: compaction_test: fix incorrect write of zero to nr_hugepages
  selftests/mm: compaction_test: fix bogus test success on Aarch64
  mailmap: update email address for Satya Priya
  mm/huge_memory: don't unpoison huge_zero_folio
  kasan, fortify: properly rename memintrinsics
  lib: add version into /proc/allocinfo output
  mm/vmalloc: fix vmalloc which may return null if called with __GFP_NOFAIL