- 07 Jan, 2020 2 commits
-
-
Julia Lawall authored
Use resource_size rather than a verbose computation on the end and start fields. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) <smpl> @@ struct resource ptr; @@ - (ptr.end - ptr.start + 1) + resource_size(&ptr) </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@inria.fr> Acked-by:
Scott Wood <oss@buserror.net> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/1577900990-8588-6-git-send-email-Julia.Lawall@inria.fr
-
Julia Lawall authored
The mpic_ipi_chip and mpic_irq_ht_chip structures are only copied into other structures, so make them const. The opportunity for this change was found using Coccinelle. Signed-off-by:
-
- 06 Jan, 2020 15 commits
-
-
Sebastian Andrzej Siewior authored
With CONFIG_QUICC_ENGINE enabled and CONFIG_UCC_GETH + CONFIG_SERIAL_QE disabled we have an unused variable (np). The code won't compile with -Werror. Move the np variable to the block where it is actually used. Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by:
-
Alexey Kardashevskiy authored
H_PUT_TCE_INDIRECT uses a shared page to send up to 512 TCE to a hypervisor in a single hypercall. This does not work for secure VMs as the page needs to be shared or the VM should use H_PUT_TCE instead. This disables H_PUT_TCE_INDIRECT by clearing the FW_FEATURE_PUT_TCE_IND feature bit so SVMs will map TCEs using H_PUT_TCE. This is not a part of init_svm() as it is called too late after FW patching is done and may result in a warning like this: [ 3.727716] Firmware features changed after feature patching! [ 3.727965] WARNING: CPU: 0 PID: 1 at (...)arch/powerpc/lib/feature-fixups.c:466 check_features+0xa4/0xc0 Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by:
Thiago Jung Bauermann <bauerman@linux.ibm.com> Tested-by:
-
Alexey Kardashevskiy authored
H_PUT_TCE_INDIRECT allows packing up to 512 TCE updates into a single hypercall; H_STUFF_TCE can clear lots in a single hypercall too. However, unlike H_STUFF_TCE (which writes the same TCE to all entries), H_PUT_TCE_INDIRECT uses a 4K page with new TCEs. In a secure VM environment this means sharing a secure VM page with a hypervisor which we would rather avoid. This splits the FW_FEATURE_MULTITCE feature into FW_FEATURE_PUT_TCE_IND and FW_FEATURE_STUFF_TCE. "hcall-multi-tce" in the "/rtas/ibm,hypertas-functions" device tree property sets both; the "multitce=off" kernel command line parameter disables both. This should not cause behavioural change. Signed-off-by:
-
Alexey Kardashevskiy authored
By default a pseries guest supports a H_PUT_TCE hypercall which maps a single IOMMU page in a DMA window. Additionally the hypervisor may support H_PUT_TCE_INDIRECT/H_STUFF_TCE which update multiple TCEs at once; this is advertised via the device tree /rtas/ibm,hypertas-functions property which Linux converts to FW_FEATURE_MULTITCE. FW_FEATURE_MULTITCE is checked when dma_iommu_ops is used; however the code managing the huge DMA window (DDW) ignores it and calls H_PUT_TCE_INDIRECT even if it is explicitly disabled via the "multitce=off" kernel command line parameter. This adds FW_FEATURE_MULTITCE checking to the DDW code path. This changes tce_build_pSeriesLP to take liobn and page size as the huge window does not have iommu_table descriptor which usually the place to store these numbers. Fixes: 4e8b0cf4 ("powerpc/pseries: Add support for dynamic dma windows") Signed-off-by:
-
Ram Pai authored
This reverts commit edea902c. At the time the change allowed direct DMA ops for secure VMs; however since then we switched on using SWIOTLB backed with IOMMU (direct mapping) and to make this work, we need dma_iommu_ops which handles all cases including TCE mapping I/O pages in the presence of an IOMMU. Fixes: edea902c ("powerpc/pseries/iommu: Don't use dma_iommu_ops on secure guests") Signed-off-by:
Ram Pai <linuxram@us.ibm.com> [aik: added "revert" and "fixes:"] Signed-off-by:
-
Michael Ellerman authored
Commit d4e58e59 ("powerpc/powernv: Enable POWER8 doorbell IPIs") added a select of PPC_DOORBELL to PPC_PSERIES, but it already had a select of PPC_DOORBELL. One is enough. Reported-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
-
Peter Ujfalusi authored
dma_request_slave_channel() is a wrapper on top of dma_request_chan() eating up the error code. By using dma_request_chan() directly the driver can support deferred probing against DMA. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
-
Oliver O'Halloran authored
With the previous patch applied pcibios_setup_device() will always be run when pcibios_bus_add_device() is called. There are several code paths where pcibios_setup_bus_device() is still called (the PowerPC specific PCI hotplug support is one) so with just the previous patch applied the setup can be run multiple times on a device, once before the device is added to the bus and once after. There's no need to run the setup in the early case any more so just remove it entirely. Signed-off-by:
Oliver O'Halloran <oohall@gmail.com> Tested-by:
-
Shawn Anastasio authored
Move PCI device setup from pcibios_add_device() and pcibios_fixup_bus() to pcibios_bus_add_device(). This ensures that platform-specific DMA and IOMMU setup occurs after the device has been registered in sysfs, which is a requirement for IOMMU group assignment to work This fixes IOMMU group assignment for hotplugged devices on pseries, where the existing behavior results in IOMMU assignment before registration. Thanks to Lukas Wunner <lukas@wunner.de> for the suggestion. Signed-off-by:
Shawn Anastasio <shawn@anastas.io> Tested-by:
-
Oliver O'Halloran authored
On pseries there is a bug with adding hotplugged devices to an IOMMU group. For a number of dumb reasons fixing that bug first requires re-working how VFs are configured on PowerNV. For background, on PowerNV we use the pcibios_sriov_enable() hook to do two things: 1. Create a pci_dn structure for each of the VFs, and 2. Configure the PHB's internal BARs so the MMIO range for each VF maps to a unique PE. Roughly speaking a PE is the hardware counterpart to a Linux IOMMU group since all the devices in a PE share the same IOMMU table. A PE also defines the set of devices that should be isolated in response to a PCI error (i.e. bad DMA, UR/CA, AER events, etc). When isolated all MMIO and DMA traffic to and from devicein the PE is blocked by the root complex until the PE is recovered by the OS. The requirement to block MMIO causes a giant headache because the P8 PHB generally uses a fixed mapping between MMIO addresses and PEs. As a result we need to delay configuring the IOMMU groups for device until after MMIO resources are assigned. For physical devices (i.e. non-VFs) the PE assignment is done in pcibios_setup_bridge() which is called immediately after the MMIO resources for downstream devices (and the bridge's windows) are assigned. For VFs the setup is more complicated because: a) pcibios_setup_bridge() is not called again when VFs are activated, and b) The pci_dev for VFs are created by generic code which runs after pcibios_sriov_enable() is called. The work around for this is a two step process: 1. A fixup in pcibios_add_device() is used to initialised the cached pe_number in pci_dn, then 2. A bus notifier then adds the device to the IOMMU group for the PE specified in pci_dn->pe_number. A side effect fixing the pseries bug mentioned in the first paragraph is moving the fixup out of pcibios_add_device() and into pcibios_bus_add_device(), which is called much later. This results in step 2. failing because pci_dn->pe_number won't be initialised when the bus notifier is run. We can fix this by removing the need for the fixup. The PE for a VF is known before the VF is even scanned so we can initialise pci_dn->pe_number pcibios_sriov_enable() instead. Unfortunately, moving the initialisation causes two problems: 1. We trip the WARN_ON() in the current fixup code, and 2. The EEH core clears pdn->pe_number when recovering a VF and relies on the fixup to correctly re-set it. The only justification for either of these is a comment in eeh_rmv_device() suggesting that pdn->pe_number *must* be set to IODA_INVALID_PE in order for the VF to be scanned. However, this comment appears to have no basis in reality. Both bugs can be fixed by just deleting the code. Tested-by: -
Aneesh Kumar K.V authored
Resource struct p->res is assigned later. Avoid using %pR before the resource struct is assigned. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
-
Michael Ellerman authored
Userspace isn't allowed to access certain address ranges, make sure we actually test that to at least some degree. This would have caught the recent bug where the SLB fault handler was incorrectly called on an out-of-range access when using the Radix MMU. It also would have caught the bug we had in get_region_id() where we were inserting SLB entries for bad addresses. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
Anju T Sudhakar authored
Documentation for IMC (In-Memory Collection Counters) infrastructure and trace-mode of IMC. Signed-off-by:
Anju T Sudhakar <anju@linux.vnet.ibm.com> [mpe: Convert to rst, minor rewording, make PMI example more concise] Signed-off-by:
-
Nathan Chancellor authored
Clang warns: ../arch/powerpc/boot/4xx.c:231:3: warning: misleading indentation; statement is not part of the previous 'else' [-Wmisleading-indentation] val = SDRAM0_READ(DDR0_42); ^ ../arch/powerpc/boot/4xx.c:227:2: note: previous statement is here else ^ This is because there is a space at the beginning of this line; remove it so that the indentation is consistent according to the Linux kernel coding style and clang no longer warns. Fixes: d23f5099 ("[POWERPC] 4xx: Adds decoding of 440SPE memory size to boot wrapper library") Signed-off-by:Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
Jordan Niethe authored
In entry_64.S there are places that open code saving and restoring the non-volatile registers. There are already macros for doing this so use them. Signed-off-by:
Jordan Niethe <jniethe5@gmail.com> Reviewed-by:
Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by:
-
- 05 Jan, 2020 7 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Paul Walmsley: "Several fixes for RISC-V: - Fix function graph trace support - Prefix the CSR IRQ_* macro names with "RV_", to avoid collisions with macros elsewhere in the Linux kernel tree named "IRQ_TIMER" - Use __pa_symbol() when computing the physical address of a kernel symbol, rather than __pa() - Mark the RISC-V port as supporting GCOV One DT addition: - Describe the L2 cache controller in the FU540 DT file One documentation update: - Add patch acceptance guideline documentation" * tag 'riscv/for-v5.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: Documentation: riscv: add patch acceptance guidelines riscv: prefix IRQ_ macro names with an RV_ namespace clocksource: riscv: add notrace to riscv_sched_clock riscv: ftrace: correct the condition logic in function graph tracer riscv: dts: Add DT support for SiFive L2 cache controller riscv: gcov: enable gcov for RISC-V riscv: mm: use __pa_symbol for kernel symbols -
Paul Walmsley authored
Formalize, in kernel documentation, the patch acceptance policy for arch/riscv. In summary, it states that as maintainers, we plan to only accept patches for new modules or extensions that have been frozen or ratified by the RISC-V Foundation. We've been following these guidelines for the past few months. In the meantime, we've received quite a bit of feedback that it would be helpful to have these guidelines formally documented. Based on a suggestion from Matthew Wilcox, we also add a link to this file to Documentation/process/index.rst, to make this document easier to find. The format of this document has also been changed to align to the format outlined in the maintainer entry profiles, in accordance with comments from Jon Corbet and Dan Williams. Signed-off-by:
Paul Walmsley <paul.walmsley@sifive.com> Reviewed-by:
Palmer Dabbelt <palmerdabbelt@google.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Krste Asanovic <krste@berkeley.edu> Cc: Andrew Waterman <waterman@eecs.berkeley.edu> Cc: Matthew Wilcox <willy@infradead.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jonathan Corbet <corbet@lwn.net>
-
Paul Walmsley authored
"IRQ_TIMER", used in the arch/riscv CSR header file, is a sufficiently generic macro name that it's used by several source files across the Linux code base. Some of these other files ultimately include the arch/riscv CSR include file, causing collisions. Fix by prefixing the RISC-V csr.h IRQ_ macro names with an RV_ prefix. Fixes: a4c3733d ("riscv: abstract out CSR names for supervisor vs machine mode") Reported-by:
Olof Johansson <olof@lixom.net> Acked-by:
-
Zong Li authored
When enabling ftrace graph tracer, it gets the tracing clock in ftrace_push_return_trace(). Eventually, it invokes riscv_sched_clock() to get the clock value. If riscv_sched_clock() isn't marked with 'notrace', it will call ftrace_push_return_trace() and cause infinite loop. The result of failure as follow: command: echo function_graph >current_tracer [ 46.176787] Unable to handle kernel paging request at virtual address ffffffe04fb38c48 [ 46.177309] Oops [#1] [ 46.177478] Modules linked in: [ 46.177770] CPU: 0 PID: 256 Comm: $d Not tainted 5.5.0-rc1 #47 [ 46.177981] epc: ffffffe00035e59a ra : ffffffe00035e57e sp : ffffffe03a7569b0 [ 46.178216] gp : ffffffe000d29b90 tp : ffffffe03a756180 t0 : ffffffe03a756968 [ 46.178430] t1 : ffffffe00087f408 t2 : ffffffe03a7569a0 s0 : ffffffe03a7569f0 [ 46.178643] s1 : ffffffe00087f408 a0 : 0000000ac054cda4 a1 : 000000000087f411 [ 46.178856] a2 : 0000000ac054cda4 a3 : 0000000000373ca0 a4 : ffffffe04fb38c48 [ 46.179099] a5 : 00000000153e22a8 a6 : 00000000005522ff a7 : 0000000000000005 [ 46.179338] s2 : ffffffe03a756a90 s3 : ffffffe00032811c s4 : ffffffe03a756a58 [ 46.179570] s5 : ffffffe000d29fe0 s6 : 0000000000000001 s7 : 0000000000000003 [ 46.179809] s8 : 0000000000000003 s9 : 0000000000000002 s10: 0000000000000004 [ 46.180053] s11: 0000000000000000 t3 : 0000003fc815749c t4 : 00000000000efc90 [ 46.180293] t5 : ffffffe000d29658 t6 : 0000000000040000 [ 46.180482] status: 0000000000000100 badaddr: ffffffe04fb38c48 cause: 000000000000000f Signed-off-by:
Zong Li <zong.li@sifive.com> Reviewed-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> [paul.walmsley@sifive.com: cleaned up patch description] Fixes: 92e0d143 ("clocksource/drivers/riscv_timer: Provide the sched_clock") Cc: stable@vger.kernel.org Signed-off-by:
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "17 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: hexagon: define ioremap_uc ocfs2: fix the crash due to call ocfs2_get_dlm_debug once less ocfs2: call journal flush to mark journal as empty after journal recovery when mount mm/hugetlb: defer freeing of huge pages if in non-task context mm/gup: fix memory leak in __gup_benchmark_ioctl mm/oom: fix pgtables units mismatch in Killed process message fs/posix_acl.c: fix kernel-doc warnings hexagon: work around compiler crash hexagon: parenthesize registers in asm predicates fs/namespace.c: make to_mnt_ns() static fs/nsfs.c: include headers for missing declarations fs/direct-io.c: include fs/internal.h for missing prototype mm: move_pages: return valid node id in status if the page is already on the target node memcg: account security cred as well to kmemcg kcov: fix struct layout for kcov_remote_arg mm/zsmalloc.c: fix the migrated zspage statistics. mm/memory_hotplug: shrink zones when offlining memory
-
Linus Torvalds authored
Merge tag 'apparmor-pr-2020-01-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor Pull apparmor fixes from John Johansen: - performance regression: only get a label reference if the fast path check fails - fix aa_xattrs_match() may sleep while holding a RCU lock - fix bind mounts aborting with -ENOMEM * tag 'apparmor-pr-2020-01-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor: apparmor: fix aa_xattrs_match() may sleep while holding a RCU lock apparmor: only get a label reference if the fast path check fails apparmor: fix bind mounts aborting with -ENOMEM
-
- 04 Jan, 2020 16 commits
-
-
John Johansen authored
aa_xattrs_match() is unfortunately calling vfs_getxattr_alloc() from a context protected by an rcu_read_lock. This can not be done as vfs_getxattr_alloc() may sleep regardles of the gfp_t value being passed to it. Fix this by breaking the rcu_read_lock on the policy search when the xattr match feature is requested and restarting the search if a policy changes occur. Fixes: 8e51f908 ("apparmor: Add support for attaching profiles via xattr, presence and value") Reported-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Reported-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
John Johansen <john.johansen@canonical.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS fixes from Paul Burton: "A collection of MIPS fixes: - Fill the struct cacheinfo shared_cpu_map field with sensible values, notably avoiding issues with perf which was unhappy in the absence of these values. - A boot fix for Loongson 2E & 2F machines which was fallout from some refactoring performed this cycle. - A Kconfig dependency fix for the Loongson CPU HWMon driver. - A couple of VDSO fixes, ensuring gettimeofday() behaves appropriately for kernel configurations that don't include support for a clocksource the VDSO can use & fixing the calling convention for the n32 & n64 VDSOs which would previously clobber the $gp/$28 register. - A build fix for vmlinuz compressed images which were inappropriately building with -fsanitize-coverage despite not being part of the kernel proper, then failing to link due to the missing __sanitizer_cov_trace_pc() function. - A couple of eBPF JIT fixes, including disabling it for MIPS32 due to a large number of issues with the code generated there & reflecting ISA dependencies in Kconfig to enforce that systems which don't support the JIT must include the interpreter" * tag 'mips_fixes_5.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: Avoid VDSO ABI breakage due to global register variable MIPS: BPF: eBPF JIT: check for MIPS ISA compliance in Kconfig MIPS: BPF: Disable MIPS32 eBPF JIT MIPS: Prevent link failure with kcov instrumentation MIPS: Kconfig: Use correct form for 'depends on' mips: Fix gettimeofday() in the vdso library MIPS: Fix boot on Fuloong2 systems mips: cacheinfo: report shared CPU map -
Nick Desaulniers authored
Similar to commit 38e45d81 ("sparc64: implement ioremap_uc") define ioremap_uc for hexagon to avoid errors from -Wimplicit-function-definition. Link: http://lkml.kernel.org/r/20191209222956.239798-2-ndesaulniers@google.com Link: https://github.com/ClangBuiltLinux/linux/issues/797 Fixes: e537654b ("lib: devres: add a helper function for ioremap_uc") Signed-off-by:
Brian Cain <bcain@codeaurora.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Tuowen Zhao <ztuowen@gmail.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alexios Zavras <alexios.zavras@intel.com> Cc: Allison Randal <allison@lohutok.net> Cc: Will Deacon <will@kernel.org> Cc: Richard Fontana <rfontana@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Gang He authored
Because ocfs2_get_dlm_debug() function is called once less here, ocfs2 file system will trigger the system crash, usually after ocfs2 file system is unmounted. This system crash is caused by a generic memory corruption, these crash backtraces are not always the same, for exapmle, ocfs2: Unmounting device (253,16) on (node 172167785) general protection fault: 0000 [#1] SMP PTI CPU: 3 PID: 14107 Comm: fence_legacy Kdump: Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:__kmalloc+0xa5/0x2a0 Code: 00 00 4d 8b 07 65 4d 8b RSP: 0018:ffffaa1fc094bbe8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: d310a8800d7a3faf RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000dc0 RDI: ffff96e68fc036c0 RBP: d310a8800d7a3faf R08: ffff96e6ffdb10a0 R09: 00000000752e7079 R10: 000000000001c513 R11: 0000000004091041 R12: 0000000000000dc0 R13: 0000000000000039 R14: ffff96e68fc036c0 R15: ffff96e68fc036c0 FS: 00007f699dfba540(0000) GS:ffff96e6ffd80000(0000) knlGS:00000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055f3a9d9b768 CR3: 000000002cd1c000 CR4: 00000000000006e0 Call Trace: ext4_htree_store_dirent+0x35/0x100 [ext4] htree_dirblock_to_tree+0xea/0x290 [ext4] ext4_htree_fill_tree+0x1c1/0x2d0 [ext4] ext4_readdir+0x67c/0x9d0 [ext4] iterate_dir+0x8d/0x1a0 __x64_sys_getdents+0xab/0x130 do_syscall_64+0x60/0x1f0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f699d33a9fb This regression problem was introduced by commit e581595e ("ocfs: no need to check return value of debugfs_create functions"). Link: http://lkml.kernel.org/r/20191225061501.13587-1-ghe@suse.com Fixes: e581595e ("ocfs: no need to check return value of debugfs_create functions") Signed-off-by:Gang He <ghe@suse.com> Acked-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> [5.3+] Signed-off-by:
-
Kai Li authored
If journal is dirty when mount, it will be replayed but jbd2 sb log tail cannot be updated to mark a new start because journal->j_flag has already been set with JBD2_ABORT first in journal_init_common. When a new transaction is committed, it will be recored in block 1 first(journal->j_tail is set to 1 in journal_reset). If emergency restart happens again before journal super block is updated unfortunately, the new recorded trans will not be replayed in the next mount. The following steps describe this procedure in detail. 1. mount and touch some files 2. these transactions are committed to journal area but not checkpointed 3. emergency restart 4. mount again and its journals are replayed 5. journal super block's first s_start is 1, but its s_seq is not updated 6. touch a new file and its trans is committed but not checkpointed 7. emergency restart again 8. mount and journal is dirty, but trans committed in 6 will not be replayed. This exception happens easily when this lun is used by only one node. If it is used by multi-nodes, other node will replay its journal and its journal super block will be updated after recovery like what this patch does. ocfs2_recover_node->ocfs2_replay_journal. The following jbd2 journal can be generated by touching a new file after journal is replayed, and seq 15 is the first valid commit, but first seq is 13 in journal super block. logdump: Block 0: Journal Superblock Seq: 0 Type: 4 (JBD2_SUPERBLOCK_V2) Blocksize: 4096 Total Blocks: 32768 First Block: 1 First Commit ID: 13 Start Log Blknum: 1 Error: 0 Feature Compat: 0 Feature Incompat: 2 block64 Feature RO compat: 0 Journal UUID: 4ED3822C54294467A4F8E87D2BA4BC36 FS Share Cnt: 1 Dynamic Superblk Blknum: 0 Per Txn Block Limit Journal: 0 Data: 0 Block 1: Journal Commit Block Seq: 14 Type: 2 (JBD2_COMMIT_BLOCK) Block 2: Journal Descriptor Seq: 15 Type: 1 (JBD2_DESCRIPTOR_BLOCK) No. Blocknum Flags 0. 587 none UUID: 00000000000000000000000000000000 1. 8257792 JBD2_FLAG_SAME_UUID 2. 619 JBD2_FLAG_SAME_UUID 3. 24772864 JBD2_FLAG_SAME_UUID 4. 8257802 JBD2_FLAG_SAME_UUID 5. 513 JBD2_FLAG_SAME_UUID JBD2_FLAG_LAST_TAG ... Block 7: Inode Inode: 8257802 Mode: 0640 Generation: 57157641 (0x3682809) FS Generation: 2839773110 (0xa9437fb6) CRC32: 00000000 ECC: 0000 Type: Regular Attr: 0x0 Flags: Valid Dynamic Features: (0x1) InlineData User: 0 (root) Group: 0 (root) Size: 7 Links: 1 Clusters: 0 ctime: 0x5de5d870 0x11104c61 -- Tue Dec 3 11:37:20.286280801 2019 atime: 0x5de5d870 0x113181a1 -- Tue Dec 3 11:37:20.288457121 2019 mtime: 0x5de5d870 0x11104c61 -- Tue Dec 3 11:37:20.286280801 2019 dtime: 0x0 -- Thu Jan 1 08:00:00 1970 ... Block 9: Journal Commit Block Seq: 15 Type: 2 (JBD2_COMMIT_BLOCK) The following is journal recovery log when recovering the upper jbd2 journal when mount again. syslog: ocfs2: File system on device (252,1) was not unmounted cleanly, recovering it. fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 0 fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 1 fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 2 fs/jbd2/recovery.c:(jbd2_journal_recover, 278): JBD2: recovery, exit status 0, recovered transactions 13 to 13 Due to first commit seq 13 recorded in journal super is not consistent with the value recorded in block 1(seq is 14), journal recovery will be terminated before seq 15 even though it is an unbroken commit, inode 8257802 is a new file and it will be lost. Link: http://lkml.kernel.org/r/20191217020140.2197-1-li.kai4@h3c.comSigned-off-by:
Kai Li <li.kai4@h3c.com> Reviewed-by:
Changwei Ge <gechangwei@live.cn> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by:
-
Waiman Long authored
The following lockdep splat was observed when a certain hugetlbfs test was run: ================================ WARNING: inconsistent lock state 4.18.0-159.el8.x86_64+debug #1 Tainted: G W --------- - - -------------------------------- inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. swapper/30/0 [HC0[0]:SC1[1]:HE1:SE0] takes: ffffffff9acdc038 (hugetlb_lock){+.?.}, at: free_huge_page+0x36f/0xaa0 {SOFTIRQ-ON-W} state was registered at: lock_acquire+0x14f/0x3b0 _raw_spin_lock+0x30/0x70 __nr_hugepages_store_common+0x11b/0xb30 hugetlb_sysctl_handler_common+0x209/0x2d0 proc_sys_call_handler+0x37f/0x450 vfs_write+0x157/0x460 ksys_write+0xb8/0x170 do_syscall_64+0xa5/0x4d0 entry_SYSCALL_64_after_hwframe+0x6a/0xdf irq event stamp: 691296 hardirqs last enabled at (691296): [<ffffffff99bb034b>] _raw_spin_unlock_irqrestore+0x4b/0x60 hardirqs last disabled at (691295): [<ffffffff99bb0ad2>] _raw_spin_lock_irqsave+0x22/0x81 softirqs last enabled at (691284): [<ffffffff97ff0c63>] irq_enter+0xc3/0xe0 softirqs last disabled at (691285): [<ffffffff97ff0ebe>] irq_exit+0x23e/0x2b0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(hugetlb_lock); <Interrupt> lock(hugetlb_lock); *** DEADLOCK *** : Call Trace: <IRQ> __lock_acquire+0x146b/0x48c0 lock_acquire+0x14f/0x3b0 _raw_spin_lock+0x30/0x70 free_huge_page+0x36f/0xaa0 bio_check_pages_dirty+0x2fc/0x5c0 clone_endio+0x17f/0x670 [dm_mod] blk_update_request+0x276/0xe50 scsi_end_request+0x7b/0x6a0 scsi_io_completion+0x1c6/0x1570 blk_done_softirq+0x22e/0x350 __do_softirq+0x23d/0xad8 irq_exit+0x23e/0x2b0 do_IRQ+0x11a/0x200 common_interrupt+0xf/0xf </IRQ> Both the hugetbl_lock and the subpool lock can be acquired in free_huge_page(). One way to solve the problem is to make both locks irq-safe. However, Mike Kravetz had learned that the hugetlb_lock is held for a linear scan of ALL hugetlb pages during a cgroup reparentling operation. So it is just too long to have irq disabled unless we can break hugetbl_lock down into finer-grained locks with shorter lock hold times. Another alternative is to defer the freeing to a workqueue job. This patch implements the deferred freeing by adding a free_hpage_workfn() work function to do the actual freeing. The free_huge_page() call in a non-task context saves the page to be freed in the hpage_freelist linked list in a lockless manner using the llist APIs. The generic workqueue is used to process the work, but a dedicated workqueue can be used instead if it is desirable to have the huge page freed ASAP. Thanks to Kirill Tkhai <ktkhai@virtuozzo.com> for suggesting the use of llist APIs which simplfy the code. Link: http://lkml.kernel.org/r/20191217170331.30893-1-longman@redhat.comSigned-off-by:Waiman Long <longman@redhat.com> Reviewed-by:
Mike Kravetz <mike.kravetz@oracle.com> Acked-by:
Davidlohr Bueso <dbueso@suse.de> Acked-by:
Michal Hocko <mhocko@suse.com> Reviewed-by:
Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
Navid Emamdoost authored
In the implementation of __gup_benchmark_ioctl() the allocated pages should be released before returning in case of an invalid cmd. Release pages via kvfree(). [akpm@linux-foundation.org: rework code flow, return -EINVAL rather than -1] Link: http://lkml.kernel.org/r/20191211174653.4102-1-navid.emamdoost@gmail.com Fixes: 714a3a1e ("mm/gup_benchmark.c: add additional pinning methods") Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Reviewed-by:
Ira Weiny <ira.weiny@intel.com> Reviewed-by:
John Hubbard <jhubbard@nvidia.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Signed-off-by:
-
Ilya Dryomov authored
pr_err() expects kB, but mm_pgtables_bytes() returns the number of bytes. As everything else is printed in kB, I chose to fix the value rather than the string. Before: [ pid ] uid tgid total_vm rss pgtables_bytes swapents oom_score_adj name ... [ 1878] 1000 1878 217253 151144 1269760 0 0 python ... Out of memory: Killed process 1878 (python) total-vm:869012kB, anon-rss:604572kB, file-rss:4kB, shmem-rss:0kB, UID:1000 pgtables:1269760kB oom_score_adj:0 After: [ pid ] uid tgid total_vm rss pgtables_bytes swapents oom_score_adj name ... [ 1436] 1000 1436 217253 151890 1294336 0 0 python ... Out of memory: Killed process 1436 (python) total-vm:869012kB, anon-rss:607516kB, file-rss:44kB, shmem-rss:0kB, UID:1000 pgtables:1264kB oom_score_adj:0 Link: http://lkml.kernel.org/r/20191211202830.1600-1-idryomov@gmail.com Fixes: 70cb6d26 ("mm/oom: add oom_score_adj and pgtables to Killed process message") Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
David Rientjes <rientjes@google.com> Acked-by:
-
Randy Dunlap authored
Fix kernel-doc warnings in fs/posix_acl.c. Also fix one typo (setgit -> setgid). fs/posix_acl.c:647: warning: Function parameter or member 'inode' not described in 'posix_acl_update_mode' fs/posix_acl.c:647: warning: Function parameter or member 'mode_p' not described in 'posix_acl_update_mode' fs/posix_acl.c:647: warning: Function parameter or member 'acl' not described in 'posix_acl_update_mode' Link: http://lkml.kernel.org/r/29b0dc46-1f28-a4e5-b1d0-ba2b65629779@infradead.org Fixes: 07393101 ("posix_acl: Clear SGID bit when setting file permissions") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Acked-by:
Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by:
Jan Kara <jack@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Nick Desaulniers authored
Clang cannot translate the string "r30" into a valid register yet. Link: https://github.com/ClangBuiltLinux/linux/issues/755 Link: http://lkml.kernel.org/r/20191028155722.23419-1-ndesaulniers@google.comSigned-off-by:
Sid Manning <sidneym@quicinc.com> Reviewed-by:
-
Nick Desaulniers authored
Hexagon requires that register predicates in assembly be parenthesized. Link: https://github.com/ClangBuiltLinux/linux/issues/754 Link: http://lkml.kernel.org/r/20191209222956.239798-3-ndesaulniers@google.comSigned-off-by:
Sid Manning <sidneym@codeaurora.org> Acked-by:
-
Eric Biggers authored
Make to_mnt_ns() static to address the following 'sparse' warning: fs/namespace.c:1731:22: warning: symbol 'to_mnt_ns' was not declared. Should it be static? Link: http://lkml.kernel.org/r/20191209234830.156260-1-ebiggers@kernel.orgSigned-off-by:Eric Biggers <ebiggers@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Eric Biggers authored
Include linux/proc_fs.h and fs/internal.h to address the following 'sparse' warnings: fs/nsfs.c:41:32: warning: symbol 'ns_dentry_operations' was not declared. Should it be static? fs/nsfs.c:145:5: warning: symbol 'open_related_ns' was not declared. Should it be static? Link: http://lkml.kernel.org/r/20191209234822.156179-1-ebiggers@kernel.orgSigned-off-by: -
Eric Biggers authored
Include fs/internal.h to address the following 'sparse' warning: fs/direct-io.c:591:5: warning: symbol 'sb_init_dio_done_wq' was not declared. Should it be static? Link: http://lkml.kernel.org/r/20191209234544.128302-1-ebiggers@kernel.orgSigned-off-by: -
Yang Shi authored
Felix Abecassis reports move_pages() would return random status if the pages are already on the target node by the below test program: int main(void) { const long node_id = 1; const long page_size = sysconf(_SC_PAGESIZE); const int64_t num_pages = 8; unsigned long nodemask = 1 << node_id; long ret = set_mempolicy(MPOL_BIND, &nodemask, sizeof(nodemask)); if (ret < 0) return (EXIT_FAILURE); void **pages = malloc(sizeof(void*) * num_pages); for (int i = 0; i < num_pages; ++i) { pages[i] = mmap(NULL, page_size, PROT_WRITE | PROT_READ, MAP_PRIVATE | MAP_POPULATE | MAP_ANONYMOUS, -1, 0); if (pages[i] == MAP_FAILED) return (EXIT_FAILURE); } ret = set_mempolicy(MPOL_DEFAULT, NULL, 0); if (ret < 0) return (EXIT_FAILURE); int *nodes = malloc(sizeof(int) * num_pages); int *status = malloc(sizeof(int) * num_pages); for (int i = 0; i < num_pages; ++i) { nodes[i] = node_id; status[i] = 0xd0; /* simulate garbage values */ } ret = move_pages(0, num_pages, pages, nodes, status, MPOL_MF_MOVE); printf("move_pages: %ld\n", ret); for (int i = 0; i < num_pages; ++i) printf("status[%d] = %d\n", i, status[i]); } Then running the program would return nonsense status values: $ ./move_pages_bug move_pages: 0 status[0] = 208 status[1] = 208 status[2] = 208 status[3] = 208 status[4] = 208 status[5] = 208 status[6] = 208 status[7] = 208 This is because the status is not set if the page is already on the target node, but move_pages() should return valid status as long as it succeeds. The valid status may be errno or node id. We can't simply initialize status array to zero since the pages may be not on node 0. Fix it by updating status with node id which the page is already on. Link: http://lkml.kernel.org/r/1575584353-125392-1-git-send-email-yang.shi@linux.alibaba.com Fixes: a49bd4d7 ("mm, numa: rework do_pages_move") Signed-off-by:Yang Shi <yang.shi@linux.alibaba.com> Reported-by:
Felix Abecassis <fabecassis@nvidia.com> Tested-by:
Christoph Lameter <cl@linux.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: <stable@vger.kernel.org> [4.17+] Signed-off-by:
-
Shakeel Butt authored
The cred_jar kmem_cache is already memcg accounted in the current kernel but cred->security is not. Account cred->security to kmemcg. Recently we saw high root slab usage on our production and on further inspection, we found a buggy application leaking processes. Though that buggy application was contained within its memcg but we observe much more system memory overhead, couple of GiBs, during that period. This overhead can adversely impact the isolation on the system. One source of high overhead we found was cred->security objects, which have a lifetime of at least the life of the process which allocated them. Link: http://lkml.kernel.org/r/20191205223721.40034-1-shakeelb@google.comSigned-off-by:
Shakeel Butt <shakeelb@google.com> Acked-by:
Chris Down <chris@chrisdown.name> Reviewed-by:
Roman Gushchin <guro@fb.com> Acked-by:
-
