- 26 Sep, 2018 2 commits
-
-
Keith Busch authored
If an Endpoint reported an error with ERR_FATAL, we previously ran driver error recovery callbacks only for the Endpoint's driver. But if we reset a Link to recover from the error, all downstream components are affected, including the Endpoint, any multi-function peers, and children of those peers. Initiate the Link reset from the deepest Downstream Port that is reliable, and call the error recovery callbacks for all its children. If a Downstream Port (including a Root Port) reports an error, we assume the Port itself is reliable and we need to reset its downstream Link. In all other cases (Switch Upstream Ports, Endpoints, Bridges, etc), we assume the Link leading to the component needs to be reset, so we initiate the reset at the parent Downstream Port. This allows two other clean-ups. First, we currently only use a Link reset, which can only be initiated using a Downstream Port, so we can remove checks for Endpoints. Second, the Downstream Port where we initiate the Link reset is reliable (unlike components downstream from it), so the special cases for error detect and resume are no longer necessary. Signed-off-by:
Keith Busch <keith.busch@intel.com> [bhelgaas: changelog] Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Sinan Kaya <okaya@kernel.org>
-
Keith Busch authored
We don't need to be paranoid about the topology changing while handling an error. If the device has changed in a hotplug capable slot, we can rely on the presence detection handling to react to a changing topology. Restore the fatal error handling behavior that existed before merging DPC with AER with 7e9084b3 ("PCI/AER: Handle ERR_FATAL with removal and re-enumeration of devices"). Signed-off-by:
-
- 21 Sep, 2018 3 commits
-
-
Keith Busch authored
The secondary bus reset may have link side effects that a hotplug capable port may incorrectly react to. Use the slot specific reset for hotplug ports, fixing the undesirable link down-up handling during error recovering. Signed-off-by:
-
Keith Busch authored
The AER driver has never read the config space of an endpoint that reported a fatal error because the link to that device is considered unreliable. An ERR_FATAL from an upstream port almost certainly indicates an error on its upstream link, so we can't expect to reliably read its config space for the same reason. Signed-off-by:
-
Keith Busch authored
Error handling may be running in parallel with a hot removal. Reference count the device during AER handling so the device can not be freed while AER wants to reference it. Signed-off-by:
-
- 20 Sep, 2018 3 commits
-
-
Keith Busch authored
This patch provides DPC save and restore capabilities. This is necessary for the driver to observe DPC events in the event the configuration space needs to be restored after a reset. Signed-off-by:
-
Keith Busch authored
The port's config space may be cleared after a link reset, which wipes out the bridge's bus and memory windows. Restore the config space that was saved during probe so we can access downstream devices. Signed-off-by:
-
Keith Busch authored
The PCI port driver saves the PCI state after initializing the device with the applicable service devices. This was, however, before the service drivers were even registered because PCI probe happens before the device_initcall initialized those service drivers. The config space state that the services set up were not being saved. The end result would cause PCI devices to not react to events that the drivers think they did if the PCI state ever needed to be restored. Fix this by changing the service drivers from using the init calls to having the portdrv driver calling the services directly. This will get the state saved as desired, while making the relationship between the port driver and the services under it more explicit in the code. Signed-off-by:
-
- 18 Sep, 2018 8 commits
-
-
Lukas Wunner authored
While refactoring the PCI hotplug core's API, I noticed a significant amount of technical debt in some of the hotplug drivers. Document the issues that caught my eye for starters. I do not have hardware at my disposal that utilizes the listed drivers and I think that's a prerequisite to work on them to ensure that no regressions sneak in. But some of this hardware is so old that it may be hard to come by. Obviously, it is fine to support old hardware, but the drivers need to be maintained. If noone steps up, perhaps we should consider sunsetting a few drivers by moving them to staging. Based on my findings, ibmphp would be the first candidate. I've found it fairly difficult to apply my API refactorings to it and have listed some obvious bugs in the driver. cpqphp is also in need of a modernization and would be a second candidate for relegation to staging. shpchp was introduced in the same commit as pciehp but hasn't benefited from the same amount of refactoring due to the decline of conventional PCI's relevance. Yet hardware supporting it may be more prevalent than for the proprietary hotplug methods. Per Documentation/process/2.Process.rst, "a TODO file should be present" for drivers in staging. The file introduced by the present commit may serve as a basis for this. Signed-off-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
-
Lukas Wunner authored
When the PCI hotplug core and its first user, cpqphp, were introduced in February 2002 with historic commit a8a2069f, cpqphp allocated a slot struct for its internal use plus a hotplug_slot struct to be registered with the hotplug core and linked the two with pointers: https://git.kernel.org/tglx/history/c/a8a2069f432c Nowadays, the predominant pattern in the tree is to embed ("subclass") such structures in one another and cast to the containing struct with container_of(). But it wasn't until July 2002 that container_of() was introduced with historic commit ec4f2142: https://git.kernel.org/tglx/history/c/ec4f214232cf pnv_php, introduced in 2016, did the right thing and embedded struct hotplug_slot in its internal struct pnv_php_slot, but all other drivers cargo-culted cpqphp's design and linked separate structs with pointers. Embedding structs is preferrable to linking them with pointers because it requires fewer allocations, thereby reducing overhead and simplifying error paths. Casting an embedded struct to the containing struct becomes a cheap subtraction rather than a dereference. And having fewer pointers reduces the risk of them pointing nowhere either accidentally or due to an attack. Convert all drivers to embed struct hotplug_slot in their internal slot struct. The "private" pointer in struct hotplug_slot thereby becomes unused, so drop it. Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> # drivers/pci/hotplug/rpa* Acked-by: Sebastian Ott <sebott@linux.ibm.com> # drivers/pci/hotplug/s390* Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> # drivers/platform/x86 Cc: Len Brown <lenb@kernel.org> Cc: Scott Murray <scott@spiteful.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Oliver OHalloran <oliveroh@au1.ibm.com> Cc: Gavin Shan <gwshan@linux.vnet.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Corentin Chary <corentin.chary@gmail.com> Cc: Darren Hart <dvhart@infradead.org>
-
Lukas Wunner authored
Ever since the PCI hotplug core was introduced in 2002, drivers had to allocate and register a struct hotplug_slot_info for every slot: https://git.kernel.org/tglx/history/c/a8a2069f432c Apparently the idea was that drivers furnish the hotplug core with an up-to-date card presence status, power status, latch status and attention indicator status as well as notify the hotplug core of changes thereof. However only 4 out of 12 hotplug drivers bother to notify the hotplug core with pci_hp_change_slot_info() and the hotplug core never made any use of the information: There is just a single macro in pci_hotplug_core.c, GET_STATUS(), which uses the hotplug_slot_info if the driver lacks the corresponding callback in hotplug_slot_ops. The macro is called when the user reads the attribute via sysfs. Now, if the callback isn't defined, the attribute isn't exposed in sysfs in the first place (see e.g. has_power_file()). There are only two situations when the hotplug_slot_info would actually be accessed: * If the driver defines ->enable_slot or ->disable_slot but not ->get_power_status. * If the driver defines ->set_attention_status but not ->get_attention_status. There is no driver doing the former and just a single driver doing the latter, namely pnv_php.c. Amend it with a ->get_attention_status callback. With that, the hotplug_slot_info becomes completely unused by the PCI hotplug core. But a few drivers use it internally as a cache: cpcihp uses it to cache the latch_status and adapter_status. cpqhp uses it to cache the adapter_status. pnv_php and rpaphp use it to cache the attention_status. shpchp uses it to cache all four values. Amend these drivers to cache the information in their private slot struct. shpchp's slot struct already contains members to cache the power_status and adapter_status, so additional members are only needed for the other two values. In the case of cpqphp, the cached value is only accessed in a single place, so instead of caching it, read the current value from the hardware. Caution: acpiphp, cpci, cpqhp, shpchp, asus-wmi and eeepc-laptop populate the hotplug_slot_info with initial values on probe. That code is herewith removed. There is a theoretical chance that the code has side effects without which the driver fails to function, e.g. if the ACPI method to read the adapter status needs to be executed at least once on probe. That seems unlikely to me, still maintainers should review the changes carefully for this possibility. Rafael adds: "I'm not aware of any case in which it will break anything, [...] but if that happens, it may be necessary to add the execution of the control methods in question directly to the initialization part." Signed-off-by:
-
Lukas Wunner authored
Hotplug drivers cannot declare their hotplug_slot_ops const, making them attractive targets for attackers, because upon registration of a hotplug slot, __pci_hp_initialize() writes to the "owner" and "mod_name" members in that struct. Fix by moving these members to struct hotplug_slot and constify every driver's hotplug_slot_ops except for pciehp. pciehp constructs its hotplug_slot_ops at runtime based on the PCIe port's capabilities, hence cannot declare them const. It can be converted to __write_rarely once that's mainlined: http://www.openwall.com/lists/kernel-hardening/2016/11/16/3Signed-off-by:
-
Lukas Wunner authored
The members in pciehp's controller struct are arranged in a seemingly arbitrary order and have grown to an amount that I no longer consider easily graspable by contributors. Sort the members into 5 rubrics: * Slot Capabilities register and quirks * Slot Control register access * Slot Status register event handling * state machine * hotplug core interface Obviously, this is just my personal bikeshed color and if anyone has a better idea, please come forward. Any ordering will do as long as the information is presented in a manageable manner. No functional change intended. Signed-off-by:
-
Lukas Wunner authored
Of the members which were just moved from pciehp's slot struct to the controller struct, rename "lock" to "state_lock" and rename "work" to "button_work" for clarity. Perform the rename separately to the unification of the two structs per Sinan's request. No functional change intended. Signed-off-by:
-
Lukas Wunner authored
pciehp was originally introduced together with shpchp in a single commit, c16b4b14 ("PCI Hotplug: Add SHPC and PCI Express hot-plug drivers"): https://git.kernel.org/tglx/history/c/c16b4b14d980 shpchp supports up to 31 slots per controller, hence uses separate slot and controller structs. pciehp has a 1:1 relationship between slot and controller and therefore never required this separation. Nevertheless, because much of the code had been copy-pasted between the two drivers, pciehp likewise uses separate structs to this very day. The artificial separation of data structures adds unnecessary complexity and bloat to pciehp and requires constantly chasing pointers at runtime. Simplify the driver by merging struct slot into struct controller. Merge the slot constructor pcie_init_slot() and the destructor pcie_cleanup_slot() into the controller counterparts. No functional change intended. Signed-off-by:
-
Lukas Wunner authored
The WiGig Bus Extension (WBE) specification allows tunneling PCIe over IEEE 802.11. A product implementing this spec is the wil6210 from Wilocity (now part of Qualcomm Atheros). It integrates a PCIe switch with a wireless network adapter: 00.0-+ [1ae9:0101] Upstream Port +-00.0-+ [1ae9:0200] Downstream Port | +-00.0 [168c:0034] Atheros AR9462 Wireless Network Adapter +-02.0 [1ae9:0201] Downstream Port +-03.0 [1ae9:0201] Downstream Port Wirelessly attached devices presumably appear below the hotplug ports with device ID [1ae9:0201]. Oddly, the Downstream Port [1ae9:0200] leading to the wireless network adapter is likewise Hotplug Capable, but has its Presence Detect State bit hardwired to zero. Even if the Link Active bit is set, Presence Detect is zero, so this cannot be caused by in-band presence detection but only by broken hardware. pciehp assumes an empty slot if Presence Detect State is zero, regardless of Link Active being one. Consequently, up until v4.18 it removes the wireless network adapter in pciehp_resume(). From v4.19 it already does so in pciehp_probe(). Be lenient towards broken hardware and assume the slot is occupied if Link Active is set: Introduce pciehp_card_present_or_link_active() and use it in lieu of pciehp_get_adapter_status() everywhere, except in pciehp_handle_presence_or_link_change() whose log messages depend on which of Presence Detect State or Link Active is set. Remove the Presence Detect State check from __pciehp_enable_slot() because it is only called if either of Presence Detect State or Link Active is set. Caution: There is a possibility that broken hardware exists which has working Presence Detect but hardwires Link Active to one. On such hardware the slot will now incorrectly be considered always occupied. If such hardware is discovered, this commit can be rolled back and a quirk can be added which sets is_hotplug_bridge = 0 for [1ae9:0200]. Link: https://bugzilla.kernel.org/show_bug.cgi?id=200839Reported-and-tested-by:David Yang <mmyangfl@gmail.com> Signed-off-by:
-
- 17 Sep, 2018 4 commits
-
-
Lukas Wunner authored
pciehp's ->enable_slot, ->disable_slot, ->get_attention_status and ->reset_slot callbacks are currently implemented by wrapper functions that do nothing else but call down to a backend function. The backends are not called from anywhere else, so drop the wrappers and use the backends directly as callbacks, thereby shaving off a few lines of unnecessary code. No functional change intended. Signed-off-by:
-
Lukas Wunner authored
Drop the following includes from pciehp source files which no longer use any of the included symbols: * <linux/sched/signal.h> in pciehp.h <linux/signal.h> in pciehp_hpc.c Added by commit de25968c ("fix more missing includes") to accommodate for a call to signal_pending(). The call was removed by commit 262303fe ("pciehp: fix wait command completion"). * <linux/interrupt.h> in pciehp_core.c Added by historic commit f308a2df ("PCI: add PCI Express Port Bus Driver subsystem") to accommodate for a call to free_irq(): https://git.kernel.org/tglx/history/c/f308a2dfbe63 The call was removed by commit 407f452b ("pciehp: remove unnecessary free_irq"). * <linux/time.h> in pciehp_core.c and pciehp_hpc.c Added by commit 34d03419 ("PCIEHP: Add Electro Mechanical Interlock (EMI) support to the PCIE hotplug driver."), which was reverted by commit bd3d99c1 ("PCI: Remove untested Electromechanical Interlock (EMI) support in pciehp."). * <linux/module.h> in pciehp_ctrl.c, pciehp_hpc.c and pciehp_pci.c Added by historic commit c16b4b14 ("PCI Hotplug: Add SHPC and PCI Express hot-plug drivers"): https://git.kernel.org/tglx/history/c/c16b4b14d980 Module-related symbols were neither used back then in those files, nor are they used today. * <linux/slab.h> in pciehp_ctrl.c Added by commit 5a0e3ad6 ("include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h") to accommodate for calls to kmalloc(). The calls were removed by commit 0e94916e ("PCI: pciehp: Handle events synchronously"). * "../pci.h" in pciehp_ctrl.c Added by historic commit 67f4660b ("PCI: ASPM patch for") to accommodate for usage of the global variable pcie_mch_quirk: https://git.kernel.org/tglx/history/c/67f4660b72f2 The global variable was removed by commit 0ba379ec ("PCI: Simplify hotplug mch quirk"). Signed-off-by:
-
Lukas Wunner authored
When removing PCI devices below a hotplug bridge, pciehp marks them as disconnected if the card is no longer present in the slot or it quiesces them if the card is still present (by disabling INTx interrupts, bus mastering and SERR# reporting). To detect whether the card is still present, pciehp checks the Presence Detect State bit in the Slot Status register. The problem with this approach is that even if the card is present, the link to it may be down, and it that case it would be better to mark the devices as disconnected instead of trying to quiesce them. Moreover, if the card in the slot was quickly replaced by another one, the Presence Detect State bit would be set, yet trying to quiesce the new card's devices would be wrong and the correct thing to do is to mark the previous card's devices as disconnected. Instead of looking at the Presence Detect State bit, it is better to differentiate whether the card was surprise removed versus safely removed (via sysfs or an Attention Button press). On surprise removal, the devices should be marked as disconnected, whereas on safe removal it is correct to quiesce the devices. The knowledge whether a surprise removal or a safe removal is at hand does exist further up in the call stack: A surprise removal is initiated by pciehp_handle_presence_or_link_change(), a safe removal by pciehp_handle_disable_request(). Pass that information down to pciehp_unconfigure_device() and use it in lieu of the Presence Detect State bit. While there, add kernel-doc to pciehp_unconfigure_device() and pciehp_configure_device(). Tested-by:
Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by:
-
Lukas Wunner authored
Commit 89ee9f76 ("PCI: Add device disconnected state") iterates over the devices on a parent bus, marks each as disconnected, then marks each device's children as disconnected using pci_walk_bus(). The same can be achieved more succinctly by calling pci_walk_bus() on the parent bus. Moreover, this does not need to wait until acquiring pci_lock_rescan_remove(), so move it out of that critical section. The critical section in err.c contains a pci_dev_get() / pci_dev_put() pair which was apparently copy-pasted from pciehp_pci.c. In the latter it serves the purpose of holding the struct pci_dev in place until the Command register is updated. err.c doesn't do anything like that, hence the pair is unnecessary. Remove it. Signed-off-by:
-
- 16 Sep, 2018 2 commits
-
-
Linus Torvalds authored
-
Greg Kroah-Hartman authored
The Code of Conflict is not achieving its implicit goal of fostering civility and the spirit of 'be excellent to each other'. Explicit guidelines have demonstrated success in other projects and other areas of the kernel. Here is a Code of Conduct statement for the wider kernel. It is based on the Contributor Covenant as described at www.contributor-covenant.org From this point forward, we should abide by these rules in order to help make the kernel community a welcoming environment to participate in. Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
Olof Johansson <olof@lxom.net> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 15 Sep, 2018 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingol Molnar: "Misc fixes: - EFI crash fix - Xen PV fixes - do not allow PTI on 2-level 32-bit kernels for now - documentation fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/APM: Fix build warning when PROC_FS is not enabled Revert "x86/mm/legacy: Populate the user page-table with user pgd's" x86/efi: Load fixmap GDT in efi_call_phys_epilog() before setting %cr3 x86/xen: Disable CPU0 hotplug for Xen PV x86/EISA: Don't probe EISA bus for Xen PV guests x86/doc: Fix Documentation/x86/earlyprintk.txt
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Misc fixes: various scheduler metrics corner case fixes, a sched_features deadlock fix, and a topology fix for certain NUMA systems" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Fix kernel-doc notation warning sched/fair: Fix load_balance redo for !imbalance sched/fair: Fix scale_rt_capacity() for SMT sched/fair: Fix vruntime_normalized() for remote non-migration wakeup sched/pelt: Fix update_blocked_averages() for RT and DL classes sched/topology: Set correct NUMA topology type sched/debug: Fix potential deadlock when writing to sched_features
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Mostly tooling fixes, but also breakpoint and x86 PMU driver fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) perf tools: Fix maps__find_symbol_by_name() tools headers uapi: Update tools's copy of linux/if_link.h tools headers uapi: Update tools's copy of linux/vhost.h tools headers uapi: Update tools's copies of kvm headers tools headers uapi: Update tools's copy of drm/drm.h tools headers uapi: Update tools's copy of asm-generic/unistd.h tools headers uapi: Update tools's copy of linux/perf_event.h perf/core: Force USER_DS when recording user stack data perf/UAPI: Clearly mark __PERF_SAMPLE_CALLCHAIN_EARLY as internal use perf/x86/intel: Add support/quirk for the MISPREDICT bit on Knights Landing CPUs perf annotate: Fix parsing aarch64 branch instructions after objdump update perf probe powerpc: Ignore SyS symbols irrespective of endianness perf event-parse: Use fixed size string for comms perf util: Fix bad memory access in trace info. perf tools: Streamline bpf examples and headers installation perf evsel: Fix potential null pointer dereference in perf_evsel__new_idx() perf arm64: Fix include path for asm-generic/unistd.h perf/hw_breakpoint: Simplify breakpoint enable in perf_event_modify_breakpoint perf/hw_breakpoint: Enable breakpoint in modify_user_hw_breakpoint perf/hw_breakpoint: Remove superfluous bp->attr.disabled = 0 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixes from Ingo Molnar: "Misc fixes: liblockdep fixes and ww_mutex fixes" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/ww_mutex: Fix spelling mistake "cylic" -> "cyclic" locking/lockdep: Delete unnecessary #include tools/lib/lockdep: Add dummy task_struct state member tools/lib/lockdep: Add empty nmi.h tools/lib/lockdep: Update Sasha Levin email to MSFT jump_label: Fix typo in warning message locking/mutex: Fix mutex debug call and ww_mutex documentation
-
Randy Dunlap authored
Fix build warning in apm_32.c when CONFIG_PROC_FS is not enabled: ../arch/x86/kernel/apm_32.c:1643:12: warning: 'proc_apm_show' defined but not used [-Wunused-function] static int proc_apm_show(struct seq_file *m, void *v) Fixes: 3f3942ac ("proc: introduce proc_create_single{,_data}") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Christoph Hellwig <hch@lst.de> Cc: Jiri Kosina <jikos@kernel.org> Link: https://lkml.kernel.org/r/be39ac12-44c2-4715-247f-4dcc3c525b8b@infradead.org
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Fixes for four CIFS/SMB3 potential pointer overflow issues, one minor build fix, and a build warning cleanup" * tag '4.19-rc3-smb3-cifs' of git://git.samba.org/sfrench/cifs-2.6: cifs: read overflow in is_valid_oplock_break() cifs: integer overflow in in SMB2_ioctl() CIFS: fix wrapping bugs in num_entries() cifs: prevent integer overflow in nxt_dir_entry() fs/cifs: require sha512 fs/cifs: suppress a string overflow warning
-
git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds authored
Pull NFS client bugfixes from Anna Schumaker: "These are a handful of fixes for problems that Trond found. Patch #1 and #3 have the same name, a second issue was found after applying the first patch. Stable bugfixes: - v4.17+: Fix tracepoint Oops in initiate_file_draining() - v4.11+: Fix an infinite loop on I/O Other fixes: - Return errors if a waiting layoutget is killed - Don't open code clearing of delegation state" * tag 'nfs-for-4.19-2' of git://git.linux-nfs.org/projects/anna/linux-nfs: NFS: Don't open code clearing of delegation state NFSv4.1 fix infinite loop on I/O. NFSv4: Fix a tracepoint Oops in initiate_file_draining() pNFS: Ensure we return the error if someone kills a waiting layoutget NFSv4: Fix a tracepoint Oops in initiate_file_draining()
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fix from Steven Rostedt: "This fixes an issue with the build system caused by a change that modifies CC_FLAGS_FTRACE. The issue is that it breaks the dependencies and causes "make targz-pkg" to rebuild the entire world" * tag 'trace-v4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing/Makefile: Fix handling redefinition of CC_FLAGS_FTRACE
-
- 14 Sep, 2018 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull DeviceTree fix from Rob Herring: "One regression for a 20 year old PowerMac: - Fix a regression on systems having a DT without any phandles which happens on a PowerMac G3" * tag 'devicetree-fixes-for-4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: fix phandle cache creation for DTs with no phandles -
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fixes from Juergen Gross: "This contains some minor cleanups and fixes: - a new knob for controlling scrubbing of pages returned by the Xen balloon driver to the Xen hypervisor to address a boot performance issue seen in large guests booted pre-ballooned - a fix of a regression in the gntdev driver which made it impossible to use fully virtualized guests (HVM guests) with a 4.19 based dom0 - a fix in Xen cpu hotplug functionality which could be triggered by wrong admin commands (setting number of active vcpus to 0) One further note: the patches have all been under test for several days in another branch. This branch has been rebased in order to avoid merge conflicts" * tag 'for-linus-4.19c-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/gntdev: fix up blockable calls to mn_invl_range_start xen: fix GCC warning and remove duplicate EVTCHN_ROW/EVTCHN_COL usage xen: avoid crash in disable_hotplug_cpu xen/balloon: add runtime control for scrubbing ballooned out pages xen/manage: don't complain about an empty value in control/sysrq node -
git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds authored
Pull Xtensa fixes and cleanups from Max Filippov: - don't allocate memory in platform_setup as the memory allocator is not initialized at that point yet; - remove unnecessary ifeq KBUILD_SRC from arch/xtensa/Makefile; - enable SG chaining in arch/xtensa/Kconfig. * tag 'xtensa-20180914' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: enable SG chaining in Kconfig xtensa: remove unnecessary KBUILD_SRC ifeq conditional xtensa: ISS: don't allocate memory in platform_setup
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Will Deacon: "The trickle of arm64 fixes continues to come in. Nothing that's the end of the world, but we've got a fix for PCI IO port accesses, an accidental naked "asm goto" and a fix to the vmcoreinfo PT_NOTE merged this time around which we'd like to get sorted before it becomes ABI. - Fix ioport_map() mapping the wrong physical address for some I/O BARs - Remove direct use of "asm goto", since some compilers don't like that - Ensure kimage_voffset is always present in vmcoreinfo PT_NOTE" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: asm-generic: io: Fix ioport_map() for !CONFIG_GENERIC_IOMAP && CONFIG_INDIRECT_PIO arm64: kernel: arch_crash_save_vmcoreinfo() should depend on CONFIG_CRASH_CORE arm64: jump_label.h: use asm_volatile_goto macro instead of "asm goto" -
Trond Myklebust authored
Add a helper for the case when the nfs4 open state has been set to use a delegation stateid, and we want to revert to using the open stateid. Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com>
-
Trond Myklebust authored
The previous fix broke recovery of delegated stateids because it assumes that if we did not mark the delegation as suspect, then the delegation has effectively been revoked, and so it removes that delegation irrespectively of whether or not it is valid and still in use. While this is "mostly harmless" for ordinary I/O, we've seen pNFS fail with LAYOUTGET spinning in an infinite loop while complaining that we're using an invalid stateid (in this case the all-zero stateid). What we rather want to do here is ensure that the delegation is always correctly marked as needing testing when that is the case. So we want to close the loophole offered by nfs4_schedule_stateid_recovery(), which marks the state as needing to be reclaimed, but not the delegation that may be backing it. Fixes: 0e3d3e5d ("NFSv4.1 fix infinite loop on IO BAD_STATEID error") Signed-off-by:
-
Trond Myklebust authored
Now that the value of 'ino' can be NULL or an ERR_PTR(), we need to change the test in the tracepoint. Fixes: ce5624f7 ("NFSv4: Return NFS4ERR_DELAY when a layout fails...") Signed-off-by:
-
Trond Myklebust authored
If someone interrupts a wait on one or more outstanding layoutgets in pnfs_update_layout() then return the ERESTARTSYS/EINTR error. Signed-off-by:
-
Trond Myklebust authored
Now that the value of 'ino' can be NULL or an ERR_PTR(), we need to change the test in the tracepoint. Fixes: ce5624f7 ("NFSv4: Return NFS4ERR_DELAY when a layout fails...") Signed-off-by:
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull dmaengine fix from Vinod Koul: "Fix the mic_x100_dma driver to use devm_kzalloc for driver memory, so that it is freed properly when it unregisters from dmaengine using managed API" * tag 'dmaengine-fix-4.19-rc4' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: mic_x100_dma: use devm_kzalloc to fix an issue
-
