- 13 Dec, 2006 36 commits
-
-
Avi Kivity authored
It seems macbooks set bit 2 but not bit 0, which is an "enabled but vmxon will fault" setting. Signed-off-by:
Avi Kivity <avi@qumranet.com> Tested-by: Alex Larsson (sometimes testing helps) Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Michael Riepe authored
Signed-off-by:
-
Avi Kivity authored
They're not on speaking terms. Signed-off-by:
-
NeilBrown authored
Thanks Jens for alerting me to this. Cc: Jens Axboe <jens.axboe@oracle.com> Cc: <raziebe@gmail.com> Signed-off-by:
Neil Brown <neilb@suse.de> Signed-off-by:
-
Jeff Dike authored
The previous checkstack fix for UML, which needs to use the host's tools, was wrong in the crossbuilding case. It would use the build host's, rather than the target's, toolchain. This patch removes the old fix and adds an explicit special case for UML, leaving everyone else alone. Signed-off-by:
Jeff Dike <jdike@addtoit.com> Signed-off-by:
-
Christoph Lameter authored
Fallback_alloc() does not do the check for GFP_WAIT as done in cache_grow(). Thus interrupts are disabled when we call kmem_getpages() which results in the failure. Duplicate the handling of GFP_WAIT in cache_grow(). Signed-off-by:
Christoph Lameter <clameter@sgi.com> Cc: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by:
-
Eric Dumazet authored
Fields of struct pipe_buf_operations have not a precise layout (ie not optimized to fit cache lines nor reduce cache line ping pongs) The bufs[] array is *large* and is placed near the beginning of the structure, so all following fields have a large offset. This is unfortunate because many archs have smaller instructions when using small offsets relative to a base register. On x86 for example, 7 bits offsets have smaller instruction lengths. Moving bufs[] at the end of pipe_buf_operations permits all fields to have small offsets, and reduce text size, and icache pressure. # size vmlinux.pre vmlinux text data bss dec hex filename 3268989 664356 492196 4425541 438745 vmlinux.pre 3268765 664356 492196 4425317 438665 vmlinux So this patch reduces text size by 224 bytes on my x86_64 machine. Similar results on ia32. Signed-off-by:Eric Dumazet <dada1@cosmosbay.com> Signed-off-by:
-
Karsten Wiese authored
Clean up a little. Signed-off-by:
Karsten Wiese <fzu@wemgehoertderstaat.de> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Acked-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Karsten Wiese authored
Added function sets "void (*conf_changed_callback)(void)". Call it, if .config's changed state changes. Use above in qconf.cc to set gui's save-widget's sensitvity. Signed-off-by:
-
Karsten Wiese authored
Those two functions are void sym_set_change_count(int count) and void sym_add_change_count(int count) All write accesses to sym_change_count are replaced by calls to above functions. Variable and changer-functions are moved to confdata.c. IMO thats ok, as sym_change_count is an attribute of the .config's change state. Signed-off-by:
-
Karsten Wiese authored
Run "make xconfig" on a freshly untarred kernel-tree. Look at the floppy disk icon of the qt application, that has just started: Its in a normal, active state. Mouse click on it: .config is being saved. This patch series changes things so taht after the mouse click on the floppy disk icon, the icon is greyed out. If you mouse click on it now, nothing happens. If you change some CONFIG_*, the floppy disk icon returns to "active state", that is, if you mouse click it now, .config is written. This patch: Returns sym_change_count to reflect the .config's change state. All read only accesses of sym_change_count are replaced by calls to conf_get_changed() . mconfig.c is manipulated to ask for saving only when conf_get_changed() returned true. Signed-off-by:
-
Eric W. Biederman authored
The code has been fixed to use kill_pid instead of kill_proc fix the comments as well. Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
This reverts commit 373beb35. No one is using this identifier yet. The purpose of this identifier is to export nsproxy to user space which is wrong. nsproxy is an internal implementation optimization, which should keep our fork times from getting slower as we increase the number of global namespaces you don't have to share. Adding a global identifier like this is inappropriate because it makes namespaces inherently non-recursive, greatly limiting what we can do with them in the future. Signed-off-by:
-
Eric Dumazet authored
- pipe/splice should use const pipe_buf_operations and file_operations - struct pipe_inode_info has an unused field "start" : get rid of it. Signed-off-by:
-
Avi Kivity authored
Signed-off-by:
-
Avi Kivity authored
The pcd, pwt, and pat bits on page table entries affect the cpu cache. Since the cache is a host resource, the guest should not be able to control it. Moreover, the meaning of these bits changes depending on whether pat is enabled or not. So, force these bits to zero on shadow page table entries at all times. Signed-off-by:
-
Avi Kivity authored
The arch splitting patchset left an extra put_cpu() in core code, where it can cause trouble for CONFIG_PREEMPT kernels. Reported-by:
Huihong Luo <huisinro@yahoo.com> Signed-off-by:
-
Avi Kivity authored
Signed-off-by:
-
Uri Lublin authored
This makes the SET_SREGS ioctl behave symmetrically to the GET_SREGS ioctl wrt the segment access rights flag. Signed-off-by:
Uri Lublin <uril@qumranet.com> Signed-off-by:
-
Randy Dunlap authored
Section .parainstructions should not warn about section mismatches. WARNING: drivers/net/hamradio/scc.o - Section mismatch: reference to .exit.text: from .parainstructions after '' (at offset 0x0) WARNING: drivers/net/hamradio/scc.o - Section mismatch: reference to .exit.text: from .parainstructions after '' (at offset 0x8) Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Ralf Baechle authored
i2o_exec_exit and i2o_driver_exit were marked as __exit which is a bug because both are invoked from __init and __exit functions. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Cc: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by:
-
Tilman Schmidt authored
Eliminate some possibilities for user processes writing to the Gigaset character device to be left sleeping indefinitely, by adding wakeup calls to error paths and properly disposing of pending write requests when the device is disconnected. It also removes unnecessary NULL checks before usb_free_urb() and usb_kill_urb() calls. Signed-off-by:
Tilman Schmidt <tilman@imap.cc> Acked-by:
Karsten Keil <kkeil@suse.de> Signed-off-by:
-
Peter Zijlstra authored
Fix up the work on stack and exit scope trouble by placing the work_struct in the uml_net_private data. Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by:
-
David Brownell authored
Some of the header file rearrangements broke the build for board-osk. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Cc: Russell King <rmk@arm.linux.org.uk> Cc: <tony@atomide.com> Signed-off-by:
-
David Brownell authored
More fixes to build breakage from the work_struct changes ... this updates the tps65010 driver. Plus, fix some dependencies related to the way it's used on the OMAP OSK: force static linking there, since the resulting kernel can't link. NOTE that until the i2c core gets fixed to work without SMBUS_QUICK, kernels needing this driver must still use "tps65010.force=0,0x48" on the command line. Signed-off-by:
-
Avi Kivity authored
As per akpm's request. Signed-off-by:
-
Avi Kivity authored
By letting gcc choose the temporary register for us, we lose arch dependency and some ugliness. Conceivably gcc will also generate marginally better code. Signed-off-by:
-
Avi Kivity authored
Instead of in the main drivers menu. Signed-off-by:
-
Anthony Liguori authored
load_TR_desc() lives in asm/desc.h, so #include that file. Signed-off-by:
Anthony Liguori <anthony@codemonkey.ws> Signed-off-by:
-
Heiko Carstens authored
24ec839c causes this: WARNING: "get_current_tty" [drivers/s390/char/fs3270.ko] undefined! Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Andrew Morton authored
#ifdef CONFIG_SMP in a file which isn't compiled in non-SMP kernels. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6Linus Torvalds authored
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] kprobe clears qp bits for special instructions [IA64] enable trap code on slot 1 [IA64] Take defensive stance on ia64_pal_get_brand_info() [IA64] fix possible XPC deadlock when disconnecting [IA64] - Reduce overhead of FP exception logging messages [IA64] fix arch/ia64/mm/contig.c:235: warning: unused variable `nid' [IA64] s/termios/ktermios/ in simserial.c [IA64] kexec/kdump: tidy up declaration of relocate_new_kernel_t [IA64] Kexec/Kdump: honour non-zero crashkernel offset. [IA64] CONFIG_KEXEC/CONFIG_CRASH_DUMP permutations [IA64] Do not call SN_SAL_SET_CPU_NUMBER twice on cpu 0
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart: [AGPGART] VIA and SiS AGP chipsets are x86-only [AGPGART] agp-amd64: section mismatches with HOTPLUG=n [AGPGART] Fix up misprogrammed bridges with incorrect AGPv2 rates.
-
Linus Torvalds authored
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IPoIB: Make sure struct ipoib_neigh.queue is always initialized IB/iser: Use the new verbs DMA mapping functions IB/srp: Use new verbs IB DMA mapping functions IPoIB: Use the new verbs DMA mapping functions IB/core: Use the new verbs DMA mapping functions IB/ipath: Implement new verbs DMA mapping functions IB: Add DMA mapping functions to allow device drivers to interpose RDMA/cma: Export rdma cm interface to userspace RDMA/cma: Add support for RDMA_PS_UDP RDMA/cma: Allow early transition to RTS to handle lost CM messages RDMA/cma: Report connect info with connect events RDMA/cma: Remove unneeded qp_type parameter from rdma_cm IB/ipath: Fix IRQ for PCI Express HCAs RDMA/amso1100: Fix memory leak in c2_qp_modify() IB/iser: Remove unused "write-only" variables IB/ipath: Remove unused "write-only" variables IB/fmr: ib_flush_fmr_pool() may wait too long
-
git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: Fix inotify maintainers entry Fix typo in new debug options. Jon needs a new shift key. fs: Convert kmalloc() + memset() to kzalloc() in fs/. configfs.h: Remove dead macro definitions. kconfig: Standardize "depends" -> "depends on" in Kconfig files e100: replace kmalloc with kcalloc um: replace kmalloc+memset with kzalloc fix typo in net/ipv4/ip_fragment.c include/linux/compiler.h: reject gcc 3 < gcc 3.2 Kconfig: fix spelling error in config KALLSYMS help text Remove duplicate "have to" in comment Fix small typo in drivers/serial/icom.c Use consistent casing in help message EXT{2,3,4}_FS: remove outdated part of the help text
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] pcwd_usb.c generic HID include file [WATCHDOG] watchdog miscdevice patch [WATCHDOG] rm9k_wdt: fix interrupt handler arguments [WATCHDOG] rm9k_wdt: fix compilation
-
- 12 Dec, 2006 4 commits
-
-
Dave Jones authored
-
Matthew Wilcox authored
There's no point in troubling the Alpha, IA-64, PowerPC and PARISC people with SiS and VIA options. Andrew thinks it helps find bugs, but there's no evidence of that. Signed-off-by:
Matthew Wilcox <matthew@wil.cx> Signed-off-by:
Dave Jones <davej@redhat.com>
-
Randy Dunlap authored
When CONFIG_HOTPLUG=n, agp_amd64_resume() calls nforce3_agp_init(), which is __devinit == __init, so has been discarded and is not usable for resume. WARNING: drivers/char/agp/amd64-agp.o - Section mismatch: reference to .init.text: from .text between 'agp_amd64_resume' (at offset 0x249) and 'amd64_tlbflush' Signed-off-by:
-
Wim Van Sebroeck authored
-
