Handle the reset GPIO and reset the device every time we
start it.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The H3 and compatibles controllers don't have any reception capabilities,
even though it was never documented as such in the binding before.

Therefore, on those controllers, we don't have the option to set an RX DMA
channel.

This was already done in the DTSI, but the binding itself was never
updated. Let's add a special case in the schemas.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

The Allwinner SoCs feature an SPDIF controller across multiple SoC
generations.

However, earlier generations were a bit simpler than the subsequent ones,
and for example would always have RX and TX capabilities, and no reset
lines.

In order to express this, let's create two YAML schemas instead of the free
form text we had before.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

When we want to support more sample rate, for example 12kHz/24kHz
we need update the process_option table, if we want to support more
sample rate next time, the table need to be updated again. which
is not flexible.

We got a function fsl_asrc_sel_proc to replace the table, which can
give the pre-processing and post-processing options according to
the sample rate.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add support for the hdmitx control glue of the Amlogic g12a SoC family.
This glue links the 3 TDM and 2 SPDIF output interfaces of the SoC to
the related inputs of the Synopsys HDMI controller found in these SoCs.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add basic support for codec-to-codec link in the axg sound card.
The cpu side of these links is expected to properly set the hw_params
and format of the link.

ATM, only the tohdmitx glue is supported but others (like the
internal DAC glue) should follow.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add the bindings and the related documentation for the audio hdmitx
control glue of the Amlogic g12a SoC family
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Let soc_dapm_mux_update_power() accept NULL as 'e' enum.

It makes the code a bit more robust and, more importantly, let the calling
mux force a disconnect of the output path if necessary.

This is useful if the dapm elements following the mux must be off
while updating the mux, to avoid glitches or force a (re)configuration.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

So far the link names of the axg sound card was derived from the cpu name
of the link. Since the dai link must be unique, it works as long as a
device does not provide more than one cpu dai. However, the 'tohdmitx'
does provide 2 dais used as cpu on codec-to-codec links

Instead of cpu name, use the node name of the dai link. DT already enforce
the uniqueness of this name
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch sets register and bit information about
data align for every memory interface.
Signed-off-by: Shunli Wang <shunli.wang@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

This supports two data align settings. One is S32_LE and
other is S24_LE.
Signed-off-by: Shunli Wang <shunli.wang@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Replace the bit atomic operations by a mutex to ensure only one dai
at a time is active on the hdmi codec.

This is a follow up on change:
3fcf94ef ("ASoC: hdmi-codec: remove reference to the current substream")
Suggested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

soc-pcm.c has soc_pcm_components_close() but not have its open()
side function. This kind of unbalance function is very unreadable.

And, current error handling is not correct.
Because it is using for_each_rtdcom() loop, we need to call
soc_pcm_components_close() anyway even though
CPU DAI .startup() failed.

This patch adds soc_pcm_components_open(), and fixup error
handling issue.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Codec side is setting codec_dai->rate = 0 when error case
at soc_pcm_hw_params(), but there is not such setting for CPU side.
This patch adds it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

cpu_dai related operation is separated by component operation at
soc_pcm_hw_params() somehow.
It is not readable, let's do it at same place
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

fe_compr is used at soc-compress, it can be bit field.
This patch move it from int to bit field.

> grep fe_compr -r sound/soc/*
sound/soc/soc-compress.c:               rtd->fe_compr = 1;
sound/soc/soc-pcm.c:            if (!fe->dpcm[stream].runtime && !fe->fe_compr)
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

soc-core core already has soc_find_component() which find
component from device node.
Let's use existing function to find component.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Many function are getting device_node from component
with caring its parent component.
This patch adds new soc_component_to_node() and share
same code.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Many code at soc_bind_dai_link() was changed, and its comment is
now a little bit anbalanced.
This patch tidyup these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Current soc_bind_dai_link() is substituting rtd->codec_dais to
codec_dais, and sets found DAI into it.
But, it is a little bit un-readable / un-understandable to
know detail of rtd, and it will make difficult to understand
rtd->cpu_dais if Multi CPU was supported.
This patch cleanup it and prepare for Multi CPU support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch uses "int i" instead of "int j" on snd_soc_resume(),
and moves struct snd_soc_dai *codec_dai to top of this function.
This is cleanup and prepare for Multi CPU support
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

devm_gpiod_get_optional() returns EBUSY after component rebound.

Request GPIO in max98357a_platform_probe() to support component
rebinding.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Icelake has different count of SSP other than CNL, using
the new defined ICL SSP count, and copy other parameters
from CNL chip info.
Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

On Icelake we have 6 SSP ports, add ICL SSP count to
enable all SSPs, instead of using the SSP count defined
for CNL.
Signed-off-by: Zhu Yingjiang <yingjiang.zhu@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

pm_runtime_get_sync()/pm_runtime_put_autosuspend() calls are
already invoked by the ASoC core in soc_pcm_open() and
soc_pcm_close(). So the SOF component driver does not need
to call them again.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

These header files are not used by kernel but internally by SOF firmware
and possibly by user space applications. If needed, they should be
included from include dir exported by SOF.
Signed-off-by: Jaska Uimonen <jaska.uimonen@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add PCI IDs for Intel CometLake platforms, which from a software
point of view are extremely similar to Cannonlake platforms.
Signed-off-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add support for Intel Comet Lake platforms by adding a new Kconfig
for CometLake and the appropriate PCI IDs.
Signed-off-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

acp3x dma pointer callback has issues in reporting hw_ptr.
Modified logic to use linear position registers to
retrieve accurate hw_ptr.
Signed-off-by: Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com>
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

This file is implicitly relying on an instance of including
module.h from <linux/acpi.h>.

Ideally, header files under include/linux shouldn't be adding
includes of other headers, in anticipation of their consumers,
but just the headers needed for the header itself to pass
parsing with CPP.

The module.h is particularly bad in this sense, as it itself does
include a whole bunch of other headers, due to the complexity of
module support.

Here, we make the include explicit, in order to allow the future
removal of module.h from linux/acpi.h without causing build breakage.

Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Turn off/on clocks when device enters suspend/resume. This
can help saving power.

As a further optimization, we turn off/on mclk only when SAI
is in master mode because otherwise mclk is externally provided.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Viorel Suman <viorel.suman@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add support of identification registers in STM32 I2S.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The dependency on the dai_id can be removed by setting different ops
for the i2s and spdif dai and storing the dai format information in
each dai structure. It simplies the code a bit.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Keeping the a pointer to the dai drivers is not necessary. It is not used
by the hdmi_codec after the probe.

Even if it was used, the 'struct snd_soc_dai_driver' can accessed through
the 'struct snd_soc_dai' so keeping the pointer in the private data
structure is not useful.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

If the hdmi-codec is on a codec-to-codec link, the substream pointer
it receives is completely made up by snd_soc_dai_link_event().
The pointer will be different between startup() and shutdown().

The hdmi-codec complains when this happens even if it is not really a
problem. The current_substream pointer is not used for anything useful
apart from getting the exclusive ownership of the device.

Remove current_substream pointer and replace the exclusive locking
mechanism with a simple variable and some atomic operations.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Remove the debug traces only showing the function name on entry.
The same can be obtained using ftrace.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add name to component driver so it is possible to lookup the component
when needed.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

The DACs volume can go over 0, both according to the data sheet and
real world testing.  The control can go up to +30dB.

This was tested by playing audio at full volume on a samus chromebook.
Signed-off-by: Dylan Reid <dgreid@chromium.org>
Reviewed-by: Hsinyu Chao <hychao@chromium.org>
Signed-off-by: Ross Zwisler <zwisler@google.com>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add pm runtime support and move clock handling there.
Close the clocks at suspend to reduce the power consumption.

fsl_esai_suspend is replaced by pm_runtime_force_suspend.
fsl_esai_resume is replaced by pm_runtime_force_resume.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add support of identification registers in STM32 SPDIFRX.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>