SDIO header currently defines unused constants READ_STATUS_BUSY and
WRITE_STATUS_IDLE. There are reciprocal constants that are used
READ_STATUS_IDLE and WRITE_STATUS_BUSY. We can roll these into a
single enumeration type and remove the two that are unused.

Add enumeration type containing IDLE/BUSY pair that are currently used
within the SDIO source. Change source to use new enum types.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

$ make includecheck | grep staging
./drivers/staging/greybus/uart.c: linux/serial.h is included more than once.
Signed-off-by: Darryl T. Agostinelli <dagostinelli@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes:
$ make versioncheck | grep staging
./drivers/staging/greybus/light.c: 15 linux/version.h not needed.
Signed-off-by: Darryl T. Agostinelli <dagostinelli@gmail.com>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The struct lu_dirpage elements in lustre_idl.h file are modified to
__le64 and __le32 types since the  elements are always converted from
litte endian to processor native format in mdc_request.c file.

Following warnings are removed by this fix.

drivers/staging/lustre/lustre/mdc/mdc_request.c:958:42: warning: cast to restricted __le64
drivers/staging/lustre/lustre/mdc/mdc_request.c:959:42: warning: cast to restricted __le64
drivers/staging/lustre/lustre/mdc/mdc_request.c:962:42: warning: cast to restricted __le64
drivers/staging/lustre/lustre/mdc/mdc_request.c:963:42: warning: cast to restricted __le64
drivers/staging/lustre/lustre/mdc/mdc_request.c:985:50: warning: cast to restricted __le32
drivers/staging/lustre/lustre/mdc/mdc_request.c:1193:24: warning: cast to restricted __le64
drivers/staging/lustre/lustre/mdc/mdc_request.c:1328:25: warning: cast to restricted __le64
drivers/staging/lustre/lustre/mdc/mdc_request.c:1329:23: warning: cast to restricted __le64
drivers/staging/lustre/lustre/mdc/mdc_request.c:1332:25: warning: cast to restricted __le64
drivers/staging/lustre/lustre/mdc/mdc_request.c:1333:23: warning: cast to restricted __le64
Signed-off-by: Skanda Guruanand <skanda.kashyap@gmail.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This resolves a checkpatch warning that "Single statement macros should
not use a do {} while (0) loop" by removing the loop and adjusting line
length accordingly.
Signed-off-by: Craig Inches <Craig@craiginches.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The cport_quiesce() method is mandatory in the case of
the es2 Greybus hd controller to shutdown the cports on
the es2 controller.
In order to add support of another controller which may not
need to shutdown its cports, make the cport_quiesce() optional,
and check if the controller implement it before to use it.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The Makefile / Kconfig currently controlling compilation of this code is:

clock/Makefile:obj-$(CONFIG_INTEL_ATOMISP)     += vlv2_plat_clock.o

atomisp/Kconfig:menuconfig INTEL_ATOMISP
atomisp/Kconfig:        bool "Enable support to Intel MIPI camera drivers"

...meaning that it currently is not being built as a module by anyone.

Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.

Since module_init was already not in use by this driver, the init
ordering remains unchanged with this commit.

Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code.

We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.

Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alan Cox <alan@linux.intel.com>
Cc: linux-media@vger.kernel.org
Cc: devel@driverdev.osuosl.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This removes a strange 'list' file in
drivers/staging/media/atomisp/pci/atomisp2/ that was not being used for
anything.

Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Previous patches deleted files, but the Makefile still referenced their
.o files.  Fix this up by removing them in the Makefile.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Driver SDIO private data structure description includes a spin_lock
that is never used. This data structure only contains a pointer to the
sdio_func and a pointer to the main device private data. A spin_lock
is not required here.

Remove unused spin_lock.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Driver SDIO header describes a structure that is never used. It can be
safely removed.

Remove unused structure description.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Driver SDIO code allocates memory for a buffer that is never used. It
can be safely removed.

Remove unused buffer, including allocation and freeing of memory.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Driver SDIO code initializes a completion that is never used. It can
be safely removed.

Remove unused completion.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

char array cmd is being scanned in using a %4s scanf format
specifier and so cmd must be an array of 5 chars. Increase size
to 5 chars to ensure we don't have an overflow.

Detected with static analysis by cppcheck:

"(error) Width 4 given in format string (no. 1) is larger than
destination buffer 'cmd[4]', use %3s to prevent overflowing it."
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lustre_cfg_new() returns error pointers and never NULL.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed extra space before comma in memset() as a part of
checkpatch.pl fix-up.
Signed-off-by: Valerio Genovese <valerio.click@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In combination with CONFIG_PROFILE_ANNOTATED_BRANCHES=y, the unlikely()
inside of the WARN() macro becomes too complex for gcc to see that
we don't use the output arguments of mt9m114_to_res() are used
correctly:

drivers/staging/media/atomisp/i2c/mt9m114.c: In function 'mt9m114_get_fmt':
drivers/staging/media/atomisp/i2c/mt9m114.c:817:13: error: 'height' may be used uninitialized in this function [-Werror=maybe-uninitialized]
  int width, height;
             ^~~~~~
drivers/staging/media/atomisp/i2c/mt9m114.c: In function 'mt9m114_s_exposure_selection':
drivers/staging/media/atomisp/i2c/mt9m114.c:1179:13: error: 'height' may be used uninitialized in this function [-Werror=maybe-uninitialized]

Without WARN_ON(), there is no problem, so by simply replacing it with
v4l2_err(), the warnings go away. The WARN() output is also not needed
here, as we'd probably catch the problem before even getting here,
and other checks for the same condition already use v4l2_err.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

UDS is another layer which actually boils down to some trivial assignments so
remove it so inline the code.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These are not used in the driver so can go away.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is a whole pile of code that wraps a single assignment. Remove it and
put the assignment in the caller. Once we have the kernels sorted we should
revisit these and remove all the pointless 1 item structs that go with it.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This isn't used so it can go in the bitbucket.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The base hmm MMU code doesn't support contiguous allocations (they BUG), so
remove support from them from the higher levels of the heirarchy.

We still need to unwind all these layers but it turns out that some of the init
order stuff is rather sensitive and the simple cleanup breaks everything
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Where we know the buffer size is reasonably constrained we can just use kmalloc,
and where it will be large vmalloc. This still leaves a pile in the middle.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We have one hard coded set of behaviour so unpick the indirection and function
pointers. This isn't the whole story. A lot of the callers are known sizes and
use cases so we can switch them directly to kmalloc later on.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We are not using these for debugging or debug logging so remove the defines,
trim and rename the functions.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

They can be replaced by kmalloc. There are a few that do need to pick kmalloc
or vmalloc. Those we leave for the moment.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The line which is initializing mipi_info variable is too long
to read. It would be placed in next line.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The address of isp->asd[i] is already assigned to
local "asd" variable. "&isp->asd[i]" would be replaced with
just "asd".
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Enable/Disable ISP irq is switched with "enable" parameter of
enable_isp_irq(). It would be better splited to two such as
enable_isp_irq()/disable_isp_irq().

But the enable_isp_irq() is no use in atomisp_cmd.c file.
So remove the enable_isp_irq() function and add
disable_isp_irq function only.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

trivial fix to spelling mistake in dev_err error message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Define new local variable to reduce the number of reference.
The new local variable is added to save the addess of dfs
and used in atomisp_freq_scaling() function.
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Function uses an if statement within a for loop to guard a block of
code. If 'if' statement conditional evaluates to false, loop breaks. The
same logic can be expressed by inverting the conditional and breaking
when new conditional evaluates to true. This allows the subsequent code
to be indented one level less, aiding readability. Reduced indentation
also allows for the code to be laid out more clearly and fixes two
checkpatch warnings.

Invert if statement conditional, break from for loop if new
conditional evaluates to true. Reduce indentation in subsequent code,
fix whitespace issues. Do not change program logic.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Function uses multi-way decision for control flow. Final statement of
function is spin_unlock(). Code can be simplified by adding a goto label
labelling the call to spin_unlock() and jumping to label instead of
using multi-way decision. This allows the code to be indented one
level less which adds to the readability.

Add goto label. Remove multi-way decision by jumping to label. Reduce
indentation in subsequent code. Do not change program logic.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Macro CHECK_ALINE is defined and never used.

Remove unused macro.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Checkpatch emits WARNING: Avoid multiple line dereference.

Fix up layout of function call, move dereference to single line.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Checkpatch emits multiple CHECK: Logical continuations should be on the
previous line.

Move logical continuations to the end of the previous line.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Kernel networking code predominately uses the identifier 'skb' for a struct
sk_buff pointer. Of 8088 instances of 'struct sk_buff *' within
net/ 6670 are named 'skb'. Following the principle of least surprise,
new networking code should use the identifier 'skb' for variables of
type 'struct sk_buff *'.

Rename identifier 'packet' to 'skb'.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Driver uses custom Michael MIC implementation. There is already an
implementation within the kernel. There is at least one other driver
already using the kernel implementation
(drivers/net/wireless/intersil/orinoco).

Add task to TODO file.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Identifier uses camel case, standard kernel style does not use camel
case.

Rename buffer 'RecvMIC' to 'recv_mic'.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Checkpatch emits WARNING: else is not generally useful after a break
or return. Two warnings of this type are emitted for this code block,
in both cases 'else' statements are unnecessary.

Remove unnecessary 'else' statements, reduce indentation in subsequent
code.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>