- 18 Nov, 2019 13 commits
-
-
Oliver Neukum authored
Copy the support over from usb-storage to get feature parity Signed-off-by:
Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191114112758.32747-2-oneukum@suse.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nagarjuna Kristam authored
XUSB phy needs to be enabled before un-powergating the power partitions. However in the current sequence, it happens opposite. Correct the phy enable and powergating partition sequence to avoid any boot hangs. Signed-off-by:
Nagarjuna Kristam <nkristam@nvidia.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Jui Chang Kuo <jckuo@nvidia.com> Tested-by:
Jon Hunter <jonathanh@nvidia.com> Acked-by:
Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/1572859470-7823-1-git-send-email-nkristam@nvidia.comSigned-off-by:
-
Greg Kroah-Hartman authored
Merge tag 'usb-ci-v5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next Peter writes: - Improve the Vbus handler - Improve the HSIC handler for i.mx serial SoC - Some other tiny changes * tag 'usb-ci-v5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb: usb: chipidea: imx: pinctrl for HSIC is optional usb: chipidea: imx: refine the error handling for hsic usb: chipidea: imx: change hsic power regulator as optional usb: chipidea: imx: check data->usbmisc_data against NULL before access usb: chipidea: core: change vbus-regulator as optional usb: chipidea: imx: enable vbus and id wakeup only for OTG events usb: chipidea: udc: protect usb interrupt enable usb: chipidea: udc: add new API ci_hdrc_gadget_connect
-
Greg Kroah-Hartman authored
Add support for the Mark-10 digital force gauge device to the cp201x driver. Based on a report and a larger patch from Joel Jennings Reported-by:
Joel Jennings <joel.jennings@makeitlabs.com> Cc: stable <stable@vger.kernel.org> Acked-by:
Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191118092119.GA153852@kroah.comSigned-off-by:
-
Peter Chen authored
For imx chipidea controllers, if they use mxs PHY, they need pinctrl for HSIC. Otherwise, it doesn't need pinctrl and usbmisc control. Like imx7d and imx8mm. Reported-by:
André Draszik <git@andred.net> Signed-off-by:
Peter Chen <peter.chen@nxp.com>
-
Peter Chen authored
- -EPROBE_DEFER is an error, but without need show error message - If pintrol is not existed, as pintrol is NULL Signed-off-by: -
Peter Chen authored
Not every platform needs this regulator. Signed-off-by: -
Li Jun authored
As usbmisc_data is optional, so add the check before access its member, this fix below static checker warning: drivers/usb/chipidea/ci_hdrc_imx.c:438 ci_hdrc_imx_probe() warn: 'data->usbmisc_data' can also be NULL which is introduced by Patch 15b80f7c3a7f: "usb: chipidea: imx: enable vbus and id wakeup only for OTG events" Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Li Jun <jun.li@nxp.com> Signed-off-by:
-
Peter Chen authored
Vbus regualtor is an optional regulator, for platforms, which doesn't have this regulator, it will get a dummy regulator and show warning message. Signed-off-by: -
Li Jun authored
If ID or VBUS is from external block, don't enable its wakeup because it isn't used at all. Signed-off-by:
-
Jun Li authored
We hit the problem with below sequence: - ci_udc_vbus_session() update vbus_active flag and ci->driver is valid, - before calling the ci_hdrc_gadget_connect(), usb_gadget_udc_stop() is called by application remove gadget driver, - ci_udc_vbus_session() will contine do ci_hdrc_gadget_connect() as gadget_ready is 1, so udc interrupt is enabled, but ci->driver is NULL. - USB connection irq generated but ci->driver is NULL. As udc irq only should be enabled when gadget driver is binded, so add spinlock to protect the usb irq enable for vbus session handling. Signed-off-by:
-
Peter Chen authored
This API is used enable device function, it is called at below situations: - VBUS is connected during boots up - Hot plug occurs during runtime Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usbGreg Kroah-Hartman authored
Felipe writes: USB: changes for v5.5 We have TI's glue layer for the Cadence USB3 controller going upstream. Tegra's XUDC driver is also going upstream with this pull request. Apart from these two big features, we have a bunch of patches switching over to devm_platform_ioremap_resource() in order to simplify code a little; and a non-critical fix for DWC3 usage via kexec. * tag 'usb-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (44 commits) usb: dwc3: of-simple: add a shutdown usb: cdns3: Add TI specific wrapper driver dt-bindings: usb: Add binding for the TI wrapper for Cadence USB3 controller usb: mtu3: fix race condition about delayed_status usb: gadget: Add UDC driver for tegra XUSB device mode controller usb: dwc3: debug: Remove newline printout usb: dwc2: use a longer core rest timeout in dwc2_core_reset() usb: gadget: udc: lpc32xx: Use devm_platform_ioremap_resource() in lpc32xx_udc_probe() USB: gadget: udc: clean up an indentation issue usb: gadget: Quieten gadget config message phy: renesas: rcar-gen3-usb2: Use platform_get_irq_optional() for optional irq usb: gadget: Remove set but not used variable 'opts' in msg_do_config usb: gadget: Remove set but not used variable 'opts' in acm_ms_do_config usb: mtu3: add a new function to do status stage usb: gadget: configfs: fix concurrent issue between composite APIs usb: gadget: f_tcm: Provide support to get alternate setting in tcm function usb: gadget: Correct NULL pointer checking in fsl gadget usb: fsl: Remove unused variable USB: dummy-hcd: use usb_urb_dir_in instead of usb_pipein USB: dummy-hcd: increase max number of devices to 32 ...
-
- 16 Nov, 2019 5 commits
-
-
Hans de Goede authored
All configuration can and should be done through fwnodes instead of through the tcpc_config struct and there are no existing users left of struct tcpc_config, so lets remove it. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20191114111840.40876-1-hdegoede@redhat.comSigned-off-by:
-
Mika Westerberg authored
Intel Ice Lake has two xHCI controllers one on PCH and the other as part of the CPU itself. The latter is also part of the so called Type C Subsystem (TCSS) sharing ACPI power resources with the PCIe root ports and the Thunderbolt controllers. In order to put the whole TCSS block into D3cold the xHCI needs to be runtime suspended as well when idle. For this reason allow runtime PM as default for Ice Lake TCSS xHCI controller. Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/1573836603-10871-5-git-send-email-mathias.nyman@linux.intel.comSigned-off-by:
-
Suwan Kim authored
Patch "USB: HCD: support giveback of URB in tasklet context"[1] introduced giveback of urb in tasklet context. [1] This patch was applied to ehci but not xhci. [2] This patch significantly reduces the hard irq time of xhci. Especially for uvc driver, the hard irq including the uvc completion function runs quite long but applying this patch reduces the hard irq time of xhci. I have tested four SS devices to check if performance degradation occurs when urb completion functions run in the tasklet context. As a result of the test, all devices works well and shows very similar performance with the upstream kernel. Moreover, usb ethernet adapter show better performance than the upstream kernel about 5% for RX and 2% for TX. Four SS devices is as follows. SS devices for test 1. WD My Passport 2TB (external hard drive) 2. Sandisk Ultra Flair USB 3.0 32GB 3. Logitech Brio webcam 4. Iptime 1gigabit ethernet adapter (Mediatek RTL8153) Test description 1. Mass storage (hard drive) performance test - run below command 10 times and compute the average performance dd if=/dev/sdN iflag=direct of=/dev/null bs=1G count=1 2. Mass storage (flash memory) performance test - run below command 10 times and compute the average performance dd if=/dev/sdN iflag=direct of=/dev/null bs=1G count=1 3. Webcam streaming performance test - run simple capture program and get the average frame rate per second - capture 1500 frames - program link https://github.com/asfaca/Webcam-performance-analyzing-tool - video resolution : 4096 X 2160 (4K) at 30 or 24 fps - device (Logitech Brio) spec url for the highest resolution and fps https://support.logitech.com/en_gb/product/brio-stream/specs 4. USB Ethernet adapter performance test - directly connect two linux machines with ethernet cable - run pktgen of linux kernel and send 1500 bytes packets - run vnstat to measure the network bandwidth for 180 seconds Test machine - CPU : Intel i5-7600 @ 3.5GHz Test results 1. Mass storage (hard drive) performance test WD My Passport 2TB (external hard drive) -------------------------------------------------------------------- xhci without tasklet | xhci with tasklet -------------------------------------------------------------------- 103.667MB/s | 103.692MB/s -------------------------------------------------------------------- 2. Mass storage (flash memory) performance test Sandisk Ultra Flair USB 3.0 32GB -------------------------------------------------------------------- xhci without tasklet | xhci with tasklet -------------------------------------------------------------------- 129.727MB/s | 130.2MB/s -------------------------------------------------------------------- 3. Webcam streaming performance test Logitech Brio webcam -------------------------------------------------------------------- xhci without tasklet | xhci with tasklet -------------------------------------------------------------------- 26.4451 fps | 26.3949 fps -------------------------------------------------------------------- 4. USB Ethernet adapter performance test Iptime 1gigabit ethernet adapter (Mediatek RTL8153) -------------------------------------------------------------------- xhci without tasklet | xhci with tasklet -------------------------------------------------------------------- RX 933.86 Mbit/s | 983.86 Mbit/s -------------------------------------------------------------------- TX 830.18 Mbit/s | 882.75 Mbit/s -------------------------------------------------------------------- [1], https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=94dfd7edfd5c9b605caf7b562de7a813d216e011 [2], https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=428aac8a81058e2303677a8fbf26670229e51d3aSigned-off-by:Suwan Kim <suwan.kim027@gmail.com> Signed-off-by:
-
Mathias Nyman authored
Trace when a register in the doorbell array is written, both for host controller command doorbell and device doorbells, including for which endpoint and stream Signed-off-by:
-
Peter Chen authored
On some situations, the software handles TRB events slower than adding TRBs, then xhci_handle_event can't return zero long time, the xHC will consider the event ring is full, and trigger "Event Ring Full" error, but in fact, the software has already finished lots of events, just no chance to update ERDP (event ring dequeue pointer). In this commit, we force update ERDP if half of TRBS_PER_SEGMENT events have handled to avoid "Event Ring Full" error. Signed-off-by:
-
- 15 Nov, 2019 1 commit
-
-
Greg Kroah-Hartman authored
Merge tag 'usb-serial-5.5-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for 5.5-rc1 Here are the USB-serial updates for 5.5-rc1, including: - support for a new class of pl2303 devices - improved divisor calculations for ch341 - fixes for a remote-wakeup bug in the moschip drivers - improved device-type handling in mos7840 - various cleanups of mos7840 Included are also some new device ids. All have been in linux-next with no reported issues. Signed-off-by:
-
- 14 Nov, 2019 12 commits
-
-
Fabio D'Urso authored
This device presents itself as a USB hub with three attached devices: - An ACM serial port connected to the GPS module (not affected by this commit) - An FTDI serial port connected to the GPS module (1546:0502) - Another FTDI serial port connected to the ODIN-W2 radio module (1546:0503) This commit registers U-Blox's VID and the PIDs of the second and third devices. Datasheet: https://www.u-blox.com/sites/default/files/C099-F9P-AppBoard-Mbed-OS3-FW_UserGuide_%28UBX-18063024%29.pdfSigned-off-by:
Fabio D'Urso <fabiodurso@hotmail.it> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Chunfeng Yun authored
Now the USB gadget subsystem can use the USB debugfs root directory, so move it's directory from the root of the debugfs filesystem into the root of usb Signed-off-by:
Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1573541519-28488-13-git-send-email-chunfeng.yun@mediatek.comSigned-off-by:
-
Chunfeng Yun authored
Now the USB gadget subsystem can use the USB debugfs root directory, so move it's directory from the root of the debugfs filesystem into the root of usb Signed-off-by:
-
Chunfeng Yun authored
Now the USB gadget subsystem can use the USB debugfs root directory, so move it's directory from the root of the debugfs filesystem into the root of usb Signed-off-by:
-
Chunfeng Yun authored
Now the USB gadget subsystem can use the USB debugfs root directory, so move it's directory from the root of the debugfs filesystem into the root of usb Signed-off-by:
-
Chunfeng Yun authored
Now the USB gadget subsystem can use the USB debugfs root directory, so move dwc2's directory from the root of the debugfs filesystem into the root of usb Signed-off-by:
-
Chunfeng Yun authored
Now the USB gadget subsystem can use the USB debugfs root directory, so move dsps's directory from the root of the debugfs filesystem into the root of usb Signed-off-by:
-
Chunfeng Yun authored
No need check the return value of debugfs_create_dir() Signed-off-by:
-
Chunfeng Yun authored
Now the USB gadget subsystem can use the USB debugfs root directory, so move dwc3's directory from the root of the debugfs filesystem into the root of usb Signed-off-by:
-
Chunfeng Yun authored
Move it's directory from the root of the debugfs filesystem into the root of usb Signed-off-by:
-
Chunfeng Yun authored
Move it's directory from the root of the debugfs filesystem into the root of usb Signed-off-by:
-
Peter Ujfalusi authored
dma_request_slave_channel_reason() is: #define dma_request_slave_channel_reason(dev, name) \ dma_request_chan(dev, name) Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191113094838.2141-1-peter.ujfalusi@ti.comSigned-off-by:
-
- 13 Nov, 2019 2 commits
-
-
Aleksander Morgado authored
These are the Foxconn-branded variants of the Dell DW5821e modules, same USB layout as those. The device exposes AT, NMEA and DIAG ports in both USB configurations. P: Vendor=0489 ProdID=e0b4 Rev=03.18 S: Manufacturer=FII S: Product=T77W968 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option P: Vendor=0489 ProdID=e0b4 Rev=03.18 S: Manufacturer=FII S: Product=T77W968 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) Signed-off-by:
Aleksander Morgado <aleksander@aleksander.es> [ johan: drop id defines ] Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Suwan Kim authored
Smatch reported that nents is not initialized and used in stub_recv_cmd_submit(). nents is currently initialized by sgl_alloc() and used to allocate multiple URBs when host controller doesn't support scatter-gather DMA. The use of uninitialized nents means that buf_len is zero and use_sg is true. But buffer length should not be zero when an URB uses scatter-gather DMA. To prevent this situation, add the conditional that checks buf_len and use_sg. And move the use of nents right after the sgl_alloc() to avoid the use of uninitialized nents. If the error occurs, it adds SDEV_EVENT_ERROR_MALLOC and stub_priv will be released by stub event handler and connection will be shut down. Fixes: ea44d190 ("usbip: Implement SG support to vhci-hcd and stub driver") Reported-by:
kbuild test robot <lkp@intel.com> Reported-by:
Shuah Khan <skhan@linuxfoundation.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191111141035.27788-1-suwan.kim027@gmail.comSigned-off-by:
-
- 12 Nov, 2019 7 commits
-
-
Oliver Neukum authored
USBIP uses lib/scatterlist.h Hence it needs to set CONFIG_SGL_ALLOC Signed-off-by:
-
Johan Hovold authored
Drop the redundant port open flag and corresponding checks. USB serial core will not call any of these driver callbacks for a closed port, and the write URBs are stopped at close(). Reviewed-by:
-
Johan Hovold authored
Drop read-urb check which is always false from completion the callback. The driver read-urb pointer is set at every open and is never cleared. Reviewed-by:
-
Johan Hovold authored
Drop the custom port driver data accessors and paranoid sanity checks. The driver data is not cleared until the driver is unbound. Reviewed-by:
-
Johan Hovold authored
Drop the helper used to retrieve the serial struct pointer from the port structure. Note that this helper was only used when the serial structure was actually not needed. Reviewed-by:
-
Johan Hovold authored
Drop the likewise paranoid serial structure sanity checks. USB serial core sets the serial pointer in the port structures at initialisation and it is never cleared, and similar for the serial structure type. Reviewed-by:
-
Johan Hovold authored
Drop the paranoid port structure sanity checks which are confusing at best. The driver data port pointer is set at port probe and never cleared, while USB serial core sets the tty driver data at install and won't call any driver functions with a NULL port pointer. Reviewed-by:
-
