- 25 Feb, 2015 8 commits
-
-
Matt Fleming authored
There are many use cases where people will want to monitor more tasks than there exist RMIDs in the hardware, meaning that we have to perform some kind of multiplexing. We do this by "rotating" the RMIDs in a workqueue, and assigning an RMID to a waiting event when the RMID becomes unused. This scheme reserves one RMID at all times for rotation. When we need to schedule a new event we give it the reserved RMID, pick a victim event from the front of the global CQM list and wait for the victim's RMID to drop to zero occupancy, before it becomes the new reserved RMID. We put the victim's RMID onto the limbo list, where it resides for a "minimum queue time", which is intended to save ourselves an expensive smp IPI when the RMID is unlikely to have a occupancy value below __intel_cqm_threshold. If we fail to recycle an RMID, even after waiting the minimum queue time then we need to increment __intel_cqm_threshold. There is an upper bound on this threshold, __intel_cqm_max_threshold, which is programmable from userland as /sys/devices/intel_cqm/max_recycling_threshold. The comments above __intel_cqm_rmid_rotate() have more details. Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kanaka Juvva <kanaka.d.juvva@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Vikas Shivappa <vikas.shivappa@linux.intel.com> Link: http://lkml.kernel.org/r/1422038748-21397-9-git-send-email-matt@codeblueprint.co.ukSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
Matt Fleming authored
Add support for task events as well as system-wide events. This change has a big impact on the way that we gather LLC occupancy values in intel_cqm_event_read(). Currently, for system-wide (per-cpu) events we defer processing to userspace which knows how to discard all but one cpu result per package. Things aren't so simple for task events because we need to do the value aggregation ourselves. To do this, we defer updating the LLC occupancy value in event->count from intel_cqm_event_read() and do an SMP cross-call to read values for all packages in intel_cqm_event_count(). We need to ensure that we only do this for one task event per cache group, otherwise we'll report duplicate values. If we're a system-wide event we want to fallback to the default perf_event_count() implementation. Refactor this into a common function so that we don't duplicate the code. Also, introduce PERF_TYPE_INTEL_CQM, since we need a way to track an event's task (if the event isn't per-cpu) inside of the Intel CQM PMU driver. This task information is only availble in the upper layers of the perf infrastructure. Other perf backends stash the target task in event->hw.*target so we need to do something similar. The task is used to determine whether events should share a cache group and an RMID. Signed-off-by:
-
Matt Fleming authored
It's possible to run into issues with re-using unused monitoring IDs because there may be stale cachelines associated with that ID from a previous allocation. This can cause the LLC occupancy values to be inaccurate. To attempt to mitigate this problem we place the IDs on a least recently used list, essentially a FIFO. The basic idea is that the longer the time period between ID re-use the lower the probability that stale cachelines exist in the cache. Signed-off-by:
-
Matt Fleming authored
Future Intel Xeon processors support a Cache QoS Monitoring feature that allows tracking of the LLC occupancy for a task or task group, i.e. the amount of data in pulled into the LLC for the task (group). Currently the PMU only supports per-cpu events. We create an event for each cpu and read out all the LLC occupancy values. Because this results in duplicate values being written out to userspace, we also export a .per-pkg event file so that the perf tools only accumulate values for one cpu per package. Signed-off-by:
-
Peter P Waskiewicz Jr authored
This patch adds support for the new Cache QoS Monitoring (CQM) feature found in future Intel Xeon processors. It includes the new values to track CQM resources to the cpuinfo_x86 structure, plus the CPUID detection routines for CQM. CQM allows a process, or set of processes, to be tracked by the CPU to determine the cache usage of that task group. Using this data from the CPU, software can be written to extract this data and report cache usage and occupancy for a particular process, or group of processes. More information about Cache QoS Monitoring can be found in the Intel (R) x86 Architecture Software Developer Manual, section 17.14. Signed-off-by:
Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by:
-
Matt Fleming authored
The Intel QoS PMU needs to know whether an event is part of a cgroup during ->event_init(), because tasks in the same cgroup share a monitoring ID. Move the cgroup initialisation before calling into the PMU driver. Signed-off-by:
-
Matt Fleming authored
For PMU drivers that record per-package counters, the ->count variable cannot be used to record an accurate aggregated value, since it's not possible to perform SMP cross-calls to cpus on other packages from the context in which we update ->count. Introduce a new optional ->count() accessor function that can be used to customize how values are collected. If a PMU driver doesn't provide a ->count() function, we fallback to the existing code. There is necessarily a window of staleness with this approach because the task that generated the counter value may not have been scheduled by the cpu recently. An alternative and more complex approach would be to use a hrtimer to periodically refresh the values from a more permissive scheduling context. So, we're trading off complexity for accuracy. Signed-off-by:
-
Matt Fleming authored
Move perf_cgroup_from_task() from kernel/events/ to include/linux/ along with the necessary struct definitions, so that it can be used by the PMU code. When the upcoming Intel Cache Monitoring PMU driver assigns monitoring IDs to perf events, it needs to be able to check whether any two monitoring events overlap (say, a cgroup and task event), which means we need to be able to lookup the cgroup associated with a task (if any). Signed-off-by:
-
- 18 Feb, 2015 22 commits
-
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: User visible changes: - No need to explicitely enable evsels for workload started from perf, let it be enabled via perf_event_attr.enable_on_exec, removing some events that take place in the 'perf trace' before a workload is really started by it. (Arnaldo Carvalho de Melo) - Fix to handle optimized not-inlined functions in 'perf probe' (Masami Hiramatsu) - Update 'perf probe' man page (Masami Hiramatsu) - 'perf trace': Allow mixing with tracepoints and suppressing plain syscalls (Arnaldo Carvalho de Melo) Infrastructure changes: - Introduce {trace_seq_do,event_format_}_fprintf functions to allow a default tracepoint field list printer to be used in tools that allows redirecting output to a file. (Arnaldo Carvalho de Melo) - The man page for pthread_attr_set_affinity_np states that _GNU_SOURCE must be defined before pthread.h, do it to fix the build in some systems (Josh Boyer) - Cleanups in 'perf buildid-cache' (Masami Hiramatsu) - Fix dso cache test case (Namhyung Kim) - Do Not rely on dso__data_read_offset() to open DSO (Namhyung Kim) - Make perf aware of tracefs (Steven Rostedt). - Fix build by defining STT_GNU_IFUNC for glibc 2.9 and older (Vinson Lee) - AArch64 symbol resolution fixes (Victor Kamensky) - Kconfig beachhead (Jiri Olsa) - Simplify nr_pages validity (Kaixu Xia) - Fixup header positioning in 'perf list' (Yunlong Song) Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Peter Zijlstra authored
The recent LBR rework for x86 left a stray flush_branch_stack() user in the PowerPC code, fix that up. Signed-off-by:
-
Kan Liang authored
LBR call stack only has user-space callchains. It is output in the PERF_SAMPLE_BRANCH_STACK data format. For kernel callchains, it's still in the form of PERF_SAMPLE_CALLCHAIN. The perf tool has to handle both data sources to construct a complete callstack. For the "perf report -D" option, both lbr and fp information will be displayed. A new call chain recording option "lbr" is introduced into the perf tool for LBR call stack. The user can use --call-graph lbr to get the call stack information from hardware. Here are some examples. When profiling bc(1) on Fedora 19: echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph lbr bc -l < cmd If enabling LBR, perf report output looks like: 50.36% bc bc [.] bc_divide | --- bc_divide execute run_code yyparse main __libc_start_main _start 33.66% bc bc [.] _one_mult | --- _one_mult bc_divide execute run_code yyparse main __libc_start_main _start 7.62% bc bc [.] _bc_do_add | --- _bc_do_add | |--99.89%-- 0x2000186a8 --0.11%-- [...] 6.83% bc bc [.] _bc_do_sub | --- _bc_do_sub | |--99.94%-- bc_add | execute | run_code | yyparse | main | __libc_start_main | _start --0.06%-- [...] 0.46% bc libc-2.17.so [.] __memset_sse2 | --- __memset_sse2 | |--54.13%-- bc_new_num | | | |--51.00%-- bc_divide | | execute | | run_code | | yyparse | | main | | __libc_start_main | | _start | | | |--30.46%-- _bc_do_sub | | bc_add | | execute | | run_code | | yyparse | | main | | __libc_start_main | | _start | | | --18.55%-- _bc_do_add | bc_add | execute | run_code | yyparse | main | __libc_start_main | _start | --45.87%-- bc_divide execute run_code yyparse main __libc_start_main _start If using FP, perf report output looks like: echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph fp bc -l < cmd 50.49% bc bc [.] bc_divide | --- bc_divide 33.57% bc bc [.] _one_mult | --- _one_mult 7.61% bc bc [.] _bc_do_add | --- _bc_do_add 0x2000186a8 6.88% bc bc [.] _bc_do_sub | --- _bc_do_sub 0.42% bc libc-2.17.so [.] __memcpy_ssse3_back | --- __memcpy_ssse3_back If using LBR, perf report -D output looks like: 3458145275743 0x2fd750 [0xd8]: PERF_RECORD_SAMPLE(IP, 0x2): 9748/9748: 0x408ea8 period: 609644 addr: 0 ... LBR call chain: nr:8 ..... 0: fffffffffffffe00 ..... 1: 0000000000408e50 ..... 2: 000000000040a458 ..... 3: 000000000040562e ..... 4: 0000000000408590 ..... 5: 00000000004022c0 ..... 6: 00000000004015dd ..... 7: 0000003d1cc21b43 ... FP chain: nr:2 ..... 0: fffffffffffffe00 ..... 1: 0000000000408ea8 ... thread: bc:9748 ...... dso: /usr/bin/bc The LBR call stack has the following known limitations: - Zero length calls are not filtered out by the hardware - Exception handing such as setjmp/longjmp will have calls/returns not match - Pushing different return address onto the stack will have calls/returns not match - If callstack is deeper than the LBR, only the last entries are captured Tested-by:Jiri Olsa <jolsa@kernel.org> Signed-off-by:
Kan Liang <kan.liang@intel.com> Signed-off-by:
-
Kan Liang authored
Currently, there are two call chain recording options, fp and dwarf. Haswell has a new feature that utilizes the existing LBR facility to record call chains. Kernel side LBR support code provides this as a third option to record call chains. This patch enables the lbr call stack support on the tooling side. LBR call stack has some limitations: - It reuses current LBR facility, so LBR call stack and branch record can not be enabled at the same time. - It is only available for user-space callchains. However, it also offers some advantages: - LBR call stack can work on user apps which don't have frame-pointers or dwarf debug info compiled. It is a good alternative when nothing else works. Tested-by:
-
Peter Zijlstra authored
With LBR call stack feature enable, there are three callchain options. Enable the 3rd callchain option (LBR callstack) to user space tooling. Signed-off-by:
-
Yan, Zheng authored
"Zero length call" uses the attribute of the call instruction to push the immediate instruction pointer on to the stack and then pops off that address into a register. This is accomplished without any matching return instruction. It confuses the hardware and make the recorded call stack incorrect. We can partially resolve this issue by: decode call instructions and discard any zero length call entry in the LBR stack. Signed-off-by:
Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by:
-
Yan, Zheng authored
LBR callstack is designed for PEBS, It does not work well with FREEZE_LBRS_ON_PMI for non PEBS event. If FREEZE_LBRS_ON_PMI is set for non PEBS event, PMIs near call/return instructions may cause superfluous increase/decrease of LBR_TOS. This patch modifies __intel_pmu_lbr_enable() to not enable FREEZE_LBRS_ON_PMI when LBR operates in callstack mode. We currently don't use LBR callstack to capture kernel space callchain, so disabling FREEZE_LBRS_ON_PMI should not be a problem. Signed-off-by:
-
Yan, Zheng authored
Make later patch more readable, no logic change. Signed-off-by:
-
Yan, Zheng authored
Use event->attr.branch_sample_type to replace intel_pmu_needs_lbr_smpl() for avoiding duplicated code that implicitly enables the LBR. Currently, branch stack can be enabled by user explicitly requesting branch sampling or implicit branch sampling to correct PEBS skid. For user explicitly requested branch sampling, the branch_sample_type is explicitly set by user. For PEBS case, the branch_sample_type is also implicitly set to PERF_SAMPLE_BRANCH_ANY in x86_pmu_hw_config. Signed-off-by:
-
Yan, Zheng authored
When the LBR call stack is enabled, it is necessary to save/restore the LBR stack on context switch. The solution is saving/restoring the LBR stack to/from task's perf event context. The LBR stack is saved/restored only when there are events that use the LBR call stack. If no event uses LBR call stack, the LBR stack is reset when task is scheduled in. Signed-off-by:
-
Yan, Zheng authored
When enabling/disabling an event, check if the event uses the LBR callstack feature, adjust the LBR callstack usage count accordingly. Later patch will use the usage count to decide if LBR stack should be saved/restored. Signed-off-by:
-
Yan, Zheng authored
When the LBR call stack is enabled, it is necessary to save/restore the LBR stack on context switch. We can use pmu specific data to store LBR stack when task is scheduled out. This patch adds code that allocates the pmu specific data. Signed-off-by:
Stephane Eranian <eranian@google.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: jolsa@redhat.com Link: http://lkml.kernel.org/r/1415156173-10035-8-git-send-email-kan.liang@intel.comSigned-off-by:
-
Yan, Zheng authored
If two tasks were both forked from the same parent task, Events in their perf task contexts can be the same. Perf core may leave out switching the perf event contexts. Previous patch inroduces pmu specific data. The data is for saving the LBR stack, it is task specific. So we need to switch the data even when context switch is optimized out. Signed-off-by:
-
Yan, Zheng authored
Introduce a new flag PERF_ATTACH_TASK_DATA for perf event's attach stata. The flag is set by PMU's event_init() callback, it indicates that perf event needs PMU specific data. The PMU specific data are initialized to zeros. Later patches will use PMU specific data to save LBR stack. Signed-off-by:
-
Yan, Zheng authored
Haswell has a new feature that utilizes the existing LBR facility to record call chains. To enable this feature, bits (JCC, NEAR_IND_JMP, NEAR_REL_JMP, FAR_BRANCH, EN_CALLSTACK) in LBR_SELECT must be set to 1, bits (NEAR_REL_CALL, NEAR-IND_CALL, NEAR_RET) must be cleared. Due to a hardware bug of Haswell, this feature doesn't work well with FREEZE_LBRS_ON_PMI. When the call stack feature is enabled, the LBR stack will capture unfiltered call data normally, but as return instructions are executed, the last captured branch record is flushed from the on-chip registers in a last-in first-out (LIFO) manner. Thus, branch information relative to leaf functions will not be captured, while preserving the call stack information of the main line execution path. This patch defines a separate lbr_sel map for Haswell. The map contains a new entry for the call stack feature. Signed-off-by:
-
Yan, Zheng authored
Previous commit introduces context switch callback, its function overlaps with the flush branch stack callback. So we can use the context switch callback to flush LBR stack. This patch adds code that uses the flush branch callback to flush the LBR stack when task is being scheduled in. The callback is enabled only when there are events use the LBR hardware. This patch also removes all old flush branch stack code. Signed-off-by:
-
Yan, Zheng authored
The callback is invoked when process is scheduled in or out. It provides mechanism for later patches to save/store the LBR stack. For the schedule in case, the callback is invoked at the same place that flush branch stack callback is invoked. So it also can replace the flush branch stack callback. To avoid unnecessary overhead, the callback is enabled only when there are events use the LBR stack. Signed-off-by:
-
Yan, Zheng authored
The index of lbr_sel_map is bit value of perf branch_sample_type. PERF_SAMPLE_BRANCH_MAX is 1024 at present, so each lbr_sel_map uses 4096 bytes. By using bit shift as index, we can reduce lbr_sel_map size to 40 bytes. This patch defines 'bit shift' for branch types, and use 'bit shift' to define lbr_sel_maps. Signed-off-by:
-
Aravind Gopalakrishnan authored
The caller of force_ibs_eilvt_setup() is ibs_eilvt_setup() which does not care about the return values. So mark it void and clean up the return statements. Signed-off-by:
Aravind Gopalakrishnan <aravind.gopalakrishnan@amd.com> Signed-off-by:
-
Shaohua Li authored
For hardware events, the userspace page of the event gets updated in context switches, so if we read the timestamp in the page, we get fresh info. For software events, this is missing currently. This patch makes the behavior consistent. With this patch, we can implement clock_gettime(THREAD_CPUTIME) with PERF_COUNT_SW_DUMMY in userspace as suggested by Andy and Peter. Code like this: if (pc->cap_user_time) { do { seq = pc->lock; barrier(); running = pc->time_running; cyc = rdtsc(); time_mult = pc->time_mult; time_shift = pc->time_shift; time_offset = pc->time_offset; barrier(); } while (pc->lock != seq); quot = (cyc >> time_shift); rem = cyc & ((1 << time_shift) - 1); delta = time_offset + quot * time_mult + ((rem * time_mult) >> time_shift); running += delta; return running; } I tried it on a busy system, the userspace page updating doesn't have noticeable overhead. Signed-off-by:Shaohua Li <shli@fb.com> Signed-off-by:
-
Shaohua Li authored
Update the shadow timestamp before start event, because .add might use the timestamp. Signed-off-by:
-
Markus Elfring authored
The pci_dev_put() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
- 13 Feb, 2015 7 commits
-
-
Arnaldo Carvalho de Melo authored
I.e. support tracing just tracepoints, without strace like raw_syscalls:*. [acme@ssdandy linux]$ trace --no-sys --ev sched:*exec,sched:*switch,sched:*exit usleep 1 0.048 ( ): sched:sched_process_exec:filename=/usr/bin/usleep pid=27298 old_pid=27298) 0.369 ( ): sched:sched_switch:usleep:27298 [120] S ==> swapper/5:0 [120]) 0.452 ( ): sched:sched_process_exit:comm=usleep pid=27298 prio=120) [acme@ssdandy linux]$ TODO: remove that (...) thing when --no-syscalls is specified. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-vn0hsixsbhm31b2rpj97r96k@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
Basically adopting 'perf record' --event command line argument syntax: # trace -e \!mprotect,mmap,munmap,open,close,read,fstat,access,arch_prctl --event sched:*switch,sched:*exec,sched:*exit usleep 1 0.048 ( ): sched:sched_process_exec:filename=/bin/usleep pid=24732 old_pid=24732) 0.078 (0.002 ms): usleep/24732 brk( ) = 0x78f000 0.430 (0.002 ms): usleep/24732 brk( ) = 0x78f000 0.434 (0.003 ms): usleep/24732 brk(brk: 0x7b0000 ) = 0x7b0000 0.438 (0.001 ms): usleep/24732 brk( ) = 0x7b0000 0.460 (0.004 ms): usleep/24732 nanosleep(rqtp: 0x7ffff3696a40) ... 0.460 ( ): sched:sched_switch:prev_comm=usleep prev_pid=24732 prev_prio=120 prev_state=S ==> next_comm=swapper/1 next_pid=0 next_prio=120) 0.515 (0.058 ms): usleep/24732 ... [continued]: nanosleep()) = 0 0.520 (0.000 ms): usleep/24732 exit_group( 0.550 ( ): sched:sched_process_exit:comm=usleep pid=24732 prio=120) # Next steps, probably in this order: 1) Use ordered_events code, the logic in trace needs the events to be time ordered when needed, i.e. when multiple CPUs are involved. 2) Callchains! 3) Automatically account for interruptions when saying how long things took. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-gpst8mph575yb4wgf91qibyb@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
$ trace time taskset -c 0 usleep 1 0.845 ( 0.021 ms): time/16722 wait4(upid: 4294967295, stat_addr: 0x7fff17f443d4, ru: 0x7fff17f44438 ) ... 0.865 ( 0.008 ms): time/16723 execve(arg0: 140733595272004, arg1: 140733595272720, arg2: 140733595272768, arg3: 139755107218496, arg4: 7307199665339051828, arg5: 3) = -2 2.395 ( 1.523 ms): taskset/16723 execve(arg0: 140733595272013, arg1: 140733595272720, arg2: 140733595272768, arg3: 139755107218496, arg4: 7307199665339051828, arg5: 3) = 0 2.411 ( 0.002 ms): taskset/16723 brk( ) = 0x1915000 3.300 ( 0.058 ms): usleep/16723 nanosleep(rqtp: 0x7ffff4ada190 ) = 0 <SNIP> 3.305 ( 0.000 ms): usleep/16723 exit_group( 3.363 ( 2.539 ms): time/16722 ... [continued]: wait4()) = 16723 3.366 ( 0.001 ms): time/16722 rt_sigaction(sig: INT, act: 0x7fff17f44160, oact: 0x7fff17f44200, sigsetsize: 8) = 0 We we're not seeing this line: 0.845 ( 0.021 ms): time/16722 wait4(upid: 4294967295, stat_addr: 0x7fff17f443d4, ru: 0x7fff17f44438 ) ... just the one when it finishes: 3.363 ( 2.539 ms): time/16722 ... [continued]: wait4()) = 16723 Still some issues left till we move to ordered_samples when multiple CPUs/threads are involved... Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-zq9x30a1ky3djqewqn2v3ja3@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
The default for 'trace workload' is to set perf_event_attr.inherit to 1, i.e. to make it equivalent to 'strace -f workload', so we were ending with syscalls for multiple processes mixed up, fix it: Before: [root@ssdandy ~]# trace -e brk time usleep 1 0.071 ( 0.002 ms): brk( ) = 0x100e000 0.802 ( 0.001 ms): brk( ) = 0x1d99000 1.132 ( 0.003 ms): brk( ) = 0x1d99000 1.136 ( 0.003 ms): brk(brk: 0x1dba000) = 0x1dba000 1.140 ( 0.001 ms): brk( ) = 0x1dba000 0.00user 0.00system 0:00.00elapsed 63%CPU (0avgtext+0avgdata 528maxresident)k 0inputs+0outputs (0major+181minor)pagefaults 0swaps [root@ssdandy ~]# After: [root@ssdandy ~]# trace -f -e brk time usleep 1 0.072 ( 0.002 ms): time/26308 brk( ) = 0x1e6e000 0.860 ( 0.001 ms): usleep/26309 brk( ) = 0xb91000 1.193 ( 0.003 ms): usleep/26309 brk( ) = 0xb91000 1.197 ( 0.003 ms): usleep/26309 brk(brk: 0xbb2000) = 0xbb2000 1.201 ( 0.001 ms): usleep/26309 brk( ) = 0xbb2000 0.00user 0.00system 0:00.00elapsed 0%CPU (0avgtext+0avgdata 524maxresident)k 0inputs+0outputs (0major+180minor)pagefaults 0swaps [root@ssdandy ~]# BTW: to achieve the 'strace workload' behaviour, i.e. without a explicit '-f', one has to use --no-inherit. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> echo Link: http://lkml.kernel.org/n/tip-`ranpwd -l 24`@git.kernel.org Link: http://lkml.kernel.org/n/tip-2wu2d5n65msxoq1i7vtcaft2@git.kernel.orgSigned-off-by: -
Yunlong Song authored
The hearer text 'List of pre-defined events (to be used in -e):' is placed in an improper function, which causes an abnormal output, e.g. 'perf list hw' shows no guiding text at all, and 'perf list hw L1-dcache*' shows the guiding text incorrectly in the middle of the output. Example Before this patch: $ perf list hw L1-dcache* branch-instructions OR branches [Hardware event] branch-misses [Hardware event] bus-cycles [Hardware event] cache-misses [Hardware event] cache-references [Hardware event] cpu-cycles OR cycles [Hardware event] instructions [Hardware event] stalled-cycles-backend OR idle-cycles-backend [Hardware event] stalled-cycles-frontend OR idle-cycles-frontend [Hardware event] List of pre-defined events (to be used in -e): <-- incorrect position L1-dcache-load-misses [Hardware cache event] L1-dcache-loads [Hardware cache event] L1-dcache-prefetch-misses [Hardware cache event] L1-dcache-prefetches [Hardware cache event] L1-dcache-store-misses [Hardware cache event] L1-dcache-stores [Hardware cache event] After this patch: $ perf list hw L1-dcache* List of pre-defined events (to be used in -e): <-- correct position branch-instructions OR branches [Hardware event] branch-misses [Hardware event] bus-cycles [Hardware event] cache-misses [Hardware event] cache-references [Hardware event] cpu-cycles OR cycles [Hardware event] instructions [Hardware event] stalled-cycles-backend OR idle-cycles-backend [Hardware event] stalled-cycles-frontend OR idle-cycles-frontend [Hardware event] L1-dcache-load-misses [Hardware cache event] L1-dcache-loads [Hardware cache event] L1-dcache-prefetch-misses [Hardware cache event] L1-dcache-prefetches [Hardware cache event] L1-dcache-store-misses [Hardware cache event] L1-dcache-stores [Hardware cache event] Signed-off-by:
Yunlong Song <yunlong.song@huawei.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1423833115-11199-8-git-send-email-yunlong.song@huawei.comSigned-off-by:
-
Kaixu Xia authored
The function is_power_of_2() also do the check on nr_pages, so the first check performed is unnecessary. On the other hand, the key point is to ensure @nr_pages is a power-of-two number and mostly @nr_pages is a nonzero value, so in the most cases, the function is_power_of_2() will be called. Signed-off-by:
Kaixu Xia <xiakaixu@huawei.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Link: http://lkml.kernel.org/r/1422352512-75150-1-git-send-email-xiakaixu@huawei.comSigned-off-by:
-
Yunlong Song authored
Fix the 'segmentation fault' bug of 'perf list --list-cmds', which also happens in other cases (e.g. record, report ...). This bug happens when there are no cmds to list at all. Example: Before this patch: $ perf list --list-cmds Segmentation fault $ After this patch: $ perf list --list-cmds $ As shown above, the result prints nothing rather than a segmentation fault. The null result means 'perf list' has no cmds to display at this time. Signed-off-by:
-
- 12 Feb, 2015 3 commits
-
-
Jiri Olsa authored
Get more verbose output wrt displaying executed commands from make. Signed-off-by:
Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Tested-by:
Will Deacon <will.deacon@arm.com> Cc: Alexis Berlemont <alexis.berlemont@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-68v67h59zoz7ilb1ggcuff3j@git.kernel.orgSigned-off-by:
-
Jiri Olsa authored
Move the lockdep library building under tools build framework. Signed-off-by:
-
Jiri Olsa authored
Move the libtraceevent library building under tools build framework. Signed-off-by:
-
