Prior to opening the channel we should have all the state setup to handle
interrupts. The current code does not do that; fix the bug. This bug
can result in faults in the interrupt path.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The SMI clause 22 & 45 read/write operations are local to the global2.c file,
so make them static. This eliminates the following warning:

drivers/net/dsa/mv88e6xxx/global2.c:571:5: warning: no previous prototype for 'mv88e6xxx_g2_smi_phy_read_c45' [-Wmissing-prototypes]
 int mv88e6xxx_g2_smi_phy_read_c45(struct mv88e6xxx_chip *chip, int addr,
     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/dsa/mv88e6xxx/global2.c:602:5: warning: no previous prototype for 'mv88e6xxx_g2_smi_phy_read_c22' [-Wmissing-prototypes]
 int mv88e6xxx_g2_smi_phy_read_c22(struct mv88e6xxx_chip *chip, int addr,
     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/dsa/mv88e6xxx/global2.c:635:5: warning: no previous prototype for 'mv88e6xxx_g2_smi_phy_write_c45' [-Wmissing-prototypes]
 int mv88e6xxx_g2_smi_phy_write_c45(struct mv88e6xxx_chip *chip, int addr,
     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/dsa/mv88e6xxx/global2.c:664:5: warning: no previous prototype for 'mv88e6xxx_g2_smi_phy_write_c22' [-Wmissing-prototypes]
 int mv88e6xxx_g2_smi_phy_write_c22(struct mv88e6xxx_chip *chip, int addr,
     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It's rather confusing that the netlink message flags are
numbered 1, 2, 4, 8, 16, 32, <unused>, 0x100. Make that
more understandable by numbering the lower ones with hex
constants as well.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On the case where nn->eth_port is null the warning message
is printing the port by dereferencing this null pointer.
Remove the deference to avoid a crash when printing the
warning message.

Detected by CoverityScan, CID#1426198 ("Dereference after null check")

Fixes: ce22f5a2 ("nfp: separate high level and low level NSP headers")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Chenbo Feng says:

====================
New getsockopt option to retrieve socket cookie

In the current kernel socket cookie implementation, there is no simple
and direct way to retrieve the socket cookie based on file descriptor. A
process mat need to get it from sock fd if it want to correlate with
sock_diag output or use a bpf map with new socket cookie function.

If userspace wants to receive the socket cookie for a given socket fd,
it must send a SOCK_DIAG_BY_FAMILY dump request and look for the 5-tuple.
This is slow and can be ambiguous in the case of sockets that have the
same 5-tuple (e.g., tproxy / transparent sockets, SO_REUSEPORT sockets,
etc.).

As shown in the example program. The xt_eBPF program is using socket cookie
to record the network traffics statistics and with the socket cookie
retrieved by getsockopt. The program can directly access to a specific
socket data without scanning the whole bpf map.
====================
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Added a per socket traffic monitoring option to illustrate the usage
of new getsockopt SO_COOKIE. The program is based on the socket traffic
monitoring program using xt_eBPF and in the new option the data entry
can be directly accessed using socket cookie. The cookie retrieved
allow us to lookup an element in the eBPF for a specific socket.
Signed-off-by: Chenbo Feng <fengc@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce a new getsockopt operation to retrieve the socket cookie
for a specific socket based on the socket fd.  It returns a unique
non-decreasing cookie for each socket.
Tested: https://android-review.googlesource.com/#/c/358163/Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Chenbo Feng <fengc@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5-updates-2017-04-16

This patchset provides some updates for the mlx5 drivers.

From Majd,
1st patch, Adds ConnectX-6 and ConnectX-6 VF PCI IDs support.

From Guy,
2nd patch, Adds RXFCS scatter support.
3rd patch, Small cleanup to make a function static.

From Eran,
4th patch, Adds 4 zeros padding to ethtool FW version.
6th patch, Trevial code reuse cleanup

From Inbar,
5th patch, Show board id in ethtool driver information

From Saeed,
7th patch, Set default RX moderation parameters on driver load
as a small fix for the latest fail-safe config feature.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Adding support for TSO and checksum hardware offloads for ipv6.
Signed-off-by: Thanneeru Srinivasulu <tsrinivasulu@cavium.com>
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sean Wang says:

====================
net-next: dsa: add Mediatek MT7530 support

MT7530 is a 7-ports Gigabit Ethernet Switch that could be found on
Mediatek router platforms such as MT7623A or MT7623N which includes 7-port
Gigabit Ethernet MAC and 5-port Gigabit Ethernet PHY. Among these ports,
The port from 0 to 4 are the user ports connecting with the remote devices
while the port 5 and 6 are the CPU ports connecting into Mediatek Ethernet
GMAC.

The patch series integrated Mediatek MT7530 into DSA support which
includes the most of the essential callbacks such as tag insertion for
port distinguishing, port control, bridge offloading, STP setup and
ethtool operations to allow DSA to model each user port into independently
standalone netdevice as the other DSA driver had done.

Changes since v1:
- rebased into 4.11-rc1
- refined binding document including below five items
- changed the type of mediatek,mcm into bool
- used reset controller binding for MCM reset and removed "mediatek,ethsys"
  property from binding
- reused CPU port's ethernet Phandle instead of creating new one and removed
  "mediatek,ethernet" property from binding
- aligned naming for GPIO reset with dsa/marvell.txt
- added phy-mode as required property child nodes within ports container
- handled gpio reset with devm_gpiod_* API
- refined comment words
- removed condition for CDM setting since the setup looks both fine for all cases
- allowed of_find_net_device_by_node() working with pointing the device node into
  real netdev instance
- fixed Kbuild warnings

Changes since v2:
- reuse readx_poll_timeout() to poll
- add proper macro instead of hard coding
- treat inconsistent cpu port as warning
- remove the usage for regmap-debugfs
- show error message when invalid id is found
- put the logic for the setup of trgmii into adjut_link()
- refine and reuse logic between port_[disable,enable], and default port setup
- correct typo

Changes since v3:
- used struct as the parameter for readx_poll_timeout() and kill
  extra lpriv defined
- moved around function to get out of an additional declaration
- fixed kbuild errors caused by missing proper include in the latest tree
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

MT7530 is a 7-ports Gigabit Ethernet Switch that could be found on
Mediatek router platforms such as MT7623A or MT7623N platform which
includes 7-port Gigabit Ethernet MAC and 5-port Gigabit Ethernet PHY.
Among these ports, The port from 0 to 4 are the user ports connecting
with the remote devices while the port 5 and 6 are the CPU ports
connecting into Mediatek Ethernet GMAC.

For port 6, it can communicate with the CPU via Mediatek Ethernet GMAC
through either the TRGMII or RGMII which could be controlled by phy-mode
in the dt-bindings to specify which mode is preferred to use. And for
port 5, only RGMII can be specified. However, currently, only port 6 is
being supported in this DSA driver.

The driver is made with the reference to qca8k and other existing DSA
driver. The most of the essential callbacks of the DSA are already
support in the driver, including tag insert for user port distinguishing,
port control, bridge offloading, STP setup and ethtool operation to allow
DSA to model each user port into a standalone netdevice as the other DSA
driver had done.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Landen Chao <Landen.Chao@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

the patch adds the setup of the corresponding device node of GMAC into the
netdev instance which could allow other modules such as DSA to find the
instance through the node in dt-bindings using of_find_net_device_by_node()
call.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The patch adds the setup for allowing CDM can recognize these packets with
carrying port-distinguishing tag. Otherwise, these tagging packets will be
handled incorrectly by CDM. The setup is also working out for general
untag packets as well.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Landen Chao <Landen.Chao@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the support for the 4-bytes tag for DSA port distinguishing inserted
allowing receiving and transmitting the packet via the particular port.
The tag is being added after the source MAC address in the ethernet
header.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Landen Chao <Landen.Chao@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add device-tree binding for Mediatek MT7530 switch.

Cc: devicetree@vger.kernel.org
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

inet_rtm_getroute synthesizes a skeletal ICMP skb, which is passed to
ip_route_input when iif is given. If a multipath route is present for
the designated destination, fib_multipath_hash ends up being called with
that skb. However, as that skb contains no information beyond the
protocol type, the calculated hash does not match the one we would see
for a real packet.

There is currently no way to fix this for layer 4 hashing, as
RTM_GETROUTE doesn't have the necessary information to create layer 4
headers. To fix this for layer 3 hashing, set appropriate saddr/daddrs
in the skb and also change the protocol to UDP to avoid special
treatment for ICMP.
Signed-off-by: Florian Larysch <fl@n621.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Joao Pinto says:

====================
net: stmmac: adding multiple buffers

This patch adds multiple buffers to stmmac in a more fragmented
way, in order to make problem debug easier.

I would kindly request to people to test this patch in their HWs in
order to check if everything's functional. Thank you.
====================
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds the napi variable to the stmmac_rx_queue
structure and forces that operations like netif_queue_stopped,
netif_wake_queue, netif_stop_queue, netdev_reset_queue and
netdev_sent_queue be made by queue.
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Tested-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds the structure stmmac_tx_queue which contains
tx queues specific data (previously in stmmac_priv).
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Tested-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds the structure stmmac_rx_queue which contains
rx queues specific data (previously in stmmac_priv).
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Tested-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch breaks several functions into RX and TX scopes, which
will be useful when adding multiple buffers mechanism.
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Tested-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tobias Klauser says:

====================
Use net_device_stats from struct net_device

Along the lines of previous patches, switch (almost) all remaining net
drivers to use net_device_stats from net_device instead of including a
copy of it in their netdev_priv struct.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of using a private copy of struct net_device_stats in struct
pegasus, use stats from struct net_device. Also remove the now
unnecessary .ndo_get_stats function.

Cc: Petko Manolov <petkan@nucleusys.com>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of using a private copy of struct net_device_stats in struct
kaweth_device, use stats from struct net_device. Also remove the now
unnecessary .ndo_get_stats function.

Cc: linux-usb@vger.kernel.org
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of using a private copy of struct net_device_stats in struct
typhoon, use stats from struct net_device.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of using a private copy of struct net_device_stats in struct
de_private, use stats from struct net_device.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of using a private copy of struct net_device_stats in struct
happy_meal, use stats from struct net_device.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of using a private copy of struct net_device_stats in struct
bigmac, use stats from struct net_device.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of using a private copy of struct net_device_stats in
struct w90p910_ether, use stats from struct net_device. Also remove
the now unnecessary .ndo_get_stats function.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of using a private copy of struct net_device_stats in struct
_mace_private, use stats from struct net_device.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of using a private copy of struct net_device_stats in struct
moxart_mac_priv_t, use stats from struct net_device. Also remove the now
unnecessary .ndo_get_stats function.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of using a private copy of struct net_device_stats in struct
macb, use stats from struct net_device.

Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of using a private copy of struct net_device_stats in
struct emac_instance, use stats from struct net_device.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of using a private copy of struct net_device_stats in struct
netdev_private, use stats from struct net_device. Also remove the now
unnecessary .ndo_get_stats function and the #ifdef'ed increment of the
collisions16 counter which doesn't exist in struct net_device_stats.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of using a private copy of struct net_device_stats in
struct port_info, use stats from struct net_device.

Cc: Santosh Raspatur <santosh@chelsio.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of using a private copy of struct net_device_stats in struct
port_info, use stats from struct net_device.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Yuval Mintz says:

====================
qede: support XDP head adjustments

Daniel has brought to my attention the fact that qede is the only driver
that currently supports XDP but still fails any program where
xdp_adjust_head is set on the bpf_prog. This series is meant to remedy
this and align qede with the rest of the driver, making it possible to
remove said field.

Patch #1 contains a minor cache-saving optimization for latter patches.

Patches #2 & #3 address existing issues with the qede implementation
[#2 should have been a part of this as it addresses something that's
affected by the additional headroom; #3 is simply here for the ride].

Patches #4 & #5 add the necessary logic in driver for ingress headroom,
the first adding the infrastrucutre needed for supporting the headroon
[as currently qede doesn't support such], and the second removing the
existing XDP limitation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In case an XDP program is attached, reserve XDP_PACKET_HEADROOM
bytes at the beginning of the packet for the program to play
with.

Modify the XDP logic in the driver to fill-in the missing bits
and re-calculate offsets and length after the program has finished
running to properly reflect the current status of the packet.

We can then go and remove the limitation of not supporting XDP programs
where xdp_adjust_head is set.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Driver currently doesn't support any headroom; The only 'available'
space it has in the head of the buffer is due to the placement
offset.
In order to allow [later] support of XDP adjustment of headroom,
modify the the ingress flow to properly handle a scenario where
the packets would have such.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Current implementation of VFs is very tight in regard to queue
resources. VFs support for XDP would require quite a bit of additional
infrastructure in qede and qed [sharing of queue-zones between queues,
more VF cids, mapping of the doorbell bar, etc.].

For now, prevent XDP programs from being attached to VFs.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>