Saves some room in the sctp_transport structure.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>

We don't need to force the T3 timer any more and it's
actually wrong to do as it causes too long of a delay.
The timer will be started if one is not running, but if
one is running, we leave it alone.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>

The 'resent' bit is used to make sure that we don't update
rto estimate based on retransmitted chunks.  However, we already
have the 'rto_pending' bit that we test when need to update rto,
so 'resent' bit is just extra.  Additionally, we currently have
a bug in that we always set a 'resent' bit and thus rto estimate
is only updated by Heartbeats.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>

commit 4951feda0c60d1ef681f1a270afdd617924ab041
    sctp: Do no select unconfirmed transports for retransmissions

added code to make sure that we do not select unconfirmed paths
for data transmission.  This caused a problem when there are only
2 paths, 1 unconfirmed and 1 unreachable.  In that case, the next
retransmit path returned is NULL and that causes a kernel crash.

The solution is to only change retransmit paths if we found one to use.
Reported-by: Frank Schuster <frank.schuster01@web.de>
Signed-off-b: Vlad Yasevich <vladislav.yasevich@hp.com>

This assignment isn't needed because we did it earlier already.

Also another reason to delete the assignment is because it triggers a
Smatch warning about checking for NULL pointers after a dereference.
Reported-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>

This patch implement sctp association probing module, the module
will be called sctp_probe.

This module allows for capturing the changes to SCTP association
state in response to incoming packets. It is used for debugging
SCTP congestion control algorithms.

Usage:
  $ modprobe sctp_probe [full=n] [port=n] [bufsize=n]
  $ cat /proc/net/sctpprobe

  The output format is:
    TIME     ASSOC     LPORT RPORT MTU    RWND  UNACK <REMOTE-ADDR   STATE  CWND   SSTHRESH  INFLIGHT  PARTIAL_BYTES_ACKED MTU> ...

  The output will be like this:
    9.226086 c4064c48  9000  8000  1500    53352     1 *192.168.0.19  1     4380    54784     1252        0     1500
    9.287195 c4064c48  9000  8000  1500    45144     5 *192.168.0.19  1     5880    54784     6500        0     1500
    9.289130 c4064c48  9000  8000  1500    42724     5 *192.168.0.19  1     7380    54784     6500        0     1500
    9.620332 c4064c48  9000  8000  1500    48284     4 *192.168.0.19  1     8880    54784     5200        0     1500
    ......
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>

sctp_chunk_is_data macro is defined to decide that
whether a chunk is data chunk or not.
Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>

An unconfirmed transport is one that we have not been
able to reach since the beginning.  There is no point in
trying to retrasnmit data on those transports.  Also, the
specification forbids it due to security issues.
Reported-by: Frank Schuster <frank.schuster01@web.de>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>

While doing retranmit, if control chunk exists, such as
FORWARD TSN chunk, and the DATA chunk can not be bundled with
this control chunk because of PMTU limit, no DATA chunk
will be retranmitted in the current implementation. This
patch makes sure to retranmit at least one DATA chunk in this case.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>

While lookup the output route, we do not set the src and dest
port. This will cause we got a wrong route if we had set the
outbund transport to IPsec with src or dst port.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>

In current implementation if ABORT chunk is received with T flag is set
and zero verification tag in COOKIE-WAIT state, the ABORT chunk will be
always accepted. This is because in COOKIE-WAIT state, the endpoint does
not know the peer's verification tag, and it's zero in the endpoint.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>

PR-SCTP extension section 3.5 Sender Side Implementation of PR-SCTP:
  C5) If a FORWARD TSN is sent, the sender MUST assure that at
      least one T3-rtx timer is running.

So this patch fix to assure at least one T3-rtx timer is running
if a FORWARD TSN is or will to sent.
Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>

SHUTDOWN-ACK is alaways sent to the primary path at the first time,
but should better transmit SHUTDOWN-ACK chunk to the same destination
transport address from which it received the SHUTDOWN chunk.
Based on the work from Wei Yongjun <yjwei@cn.fujitsu.com>.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>

The function should use the address family of the address when
trying to determine the length of the structure.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>

We dereference "sk" unconditionally elsewhere in the function.  

This was left over from:  b30bd282 "ip6_xmit: remove unnecessary NULL
ptr check".  According to that commit message, "the sk argument to 
ip6_xmit is never NULL nowadays since the skb->priority assigment 
expects a valid socket."
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

potential uninitialized variable num_xfrms

fix compiler warning: 'num_xfrms' may be used uninitialized in this function.
Signed-off-by: Changli Gao <xiaosuo@gmail.com>
----
 net/xfrm/xfrm_policy.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Signed-off-by: David S. Miller <davem@davemloft.net>

sock_recv_ts_and_drops() is fat and slow (~ 4% of cpu time on some
profiles)

We can test all socket flags at once to make fast path fast again.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch removes vid/pid for Ericsson MBM devices from the whitelist set of
devices. The MBM devices are instead identified by GUID.

In order for cdc_ether to handle these devices the GUID in the MDLM descriptor
is tested. All MBM devices currently handled by cdc_ether as well as future
CDC Ethernet MBM devices can be identified by the GUID.

This is the same solution used in Carl Nordbeck's mbm driver,
http://kerneltrap.org/mailarchive/linux-usb/2008/11/17/4141384/thread

I post this as RFC to get feedback on however cdc_ether is the correct place to
do the binding, or if it should be done in a separate driver, e.g. zaurus.
Signed-off-by: Jonas Sjöquist <jonas.sjoquist@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The following does the same thing without the extra overhead
of testing all the registers. It also handles the out of memory
case.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Tested-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When queueing a skb to socket, we can immediately release its dst if
target socket do not use IP_CMSG_PKTINFO.

tcp_data_queue() can drop dst too.

This to benefit from a hot cache line and avoid the receiver, possibly
on another cpu, to dirty this cache line himself.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit 95766fff ([UDP]: Add memory accounting.), 
each received packet needs one extra sock_lock()/sock_release() pair.

This added latency because of possible backlog handling. Then later,
ticket spinlocks added yet another latency source in case of DDOS.

This patch introduces lock_sock_bh() and unlock_sock_bh()
synchronization primitives, avoiding one atomic operation and backlog
processing.

skb_free_datagram_locked() uses them instead of full blown
lock_sock()/release_sock(). skb is orphaned inside locked section for
proper socket memory reclaim, and finally freed outside of it.

UDP receive path now take the socket spinlock only once.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

in your merge in 5c01d566 you added "int
i;" into wl1271_main.c which is unused in that function.

This patch fixes the merge problem:
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Sjur Braendeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Changes:
o Bugfix: Flow control was causing the device to be destroyed.
o Bugfix: Handle CAIF channel connect failures.
o If the underlying link layer is gone the net-device is no longer removed,
  but closed.
Signed-off-by: Sjur Braendeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Changes:
 This is a complete re-write of the socket layer. Making the socket
 implementation more aligned with the other socket layers and using more
 of the support functions available in sock.c. Lots of code is copied
 from af_unix (and some from af_irda).
 Non-blocking mode should be working as well.
Signed-off-by: Sjur Braendeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Changes:
o Function cfcnfg_disconn_adapt_layer is changed to do asynchronous
  disconnect, not waiting for any response from the modem. Due to this
  the function cfcnfg_linkdestroy_rsp does nothing anymore.
o Because disconnect may take down a connection before a connect response
  is received the function cfcnfg_linkup_rsp is checking if the client is
  still waiting for the response, if not a disconnect request is sent to
  the modem.
o cfctrl is no longer keeping track of pending disconnect requests.
o Added function cfctrl_cancel_req, which is used for deleting a pending
  connect request if disconnect is done before connect response is received.
o Removed unused function cfctrl_insert_req2
o Added better handling of connect reject from modem.
Signed-off-by: Sjur Braendeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Changes:
o Added functions cfsrvl_get and cfsrvl_put.
o Added support release_client to use by socket and net device.
o Increase reference counting for in-flight packets from cfmuxl
Signed-off-by: Sjur Braendeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Changes:
 o Renamed cfcnfg_del_adapt_layer to cfcnfg_disconn_adapt_layer
 o Fixed typo cfcfg to cfcnfg
 o Renamed linkid to channel_id
 o Updated documentation in caif_dev.h
 o Minor formatting changes
Signed-off-by: Sjur Braendeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Changes:
   o Added permission checks for installing. CAP_SYS_ADMIN and
     CAP_SYS_TTY_CONFIG can install the ldisc.
   o Check if allocation of skb was successful.
Signed-off-by: Sjur Braendeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Create a core TX queue and 2 hardware TX queues for each channel.
If separate_tx_channels is set, create equal numbers of RX and TX
channels instead.

Rewrite the channel and queue iteration macros accordingly.
Eliminate efx_channel::used_flags as redundant.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This makes no immediate difference, but we definitely do not want
to test all TX queues once we allocate a pair of TX queues to each
channel.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no need for this to be unsigned long; make it unsigned int.
It does need a line in kernel-doc, so add that.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently TX completions do not count towards the NAPI budget.  This
means a continuous stream of TX completions can cause the polling
function to loop indefinitely with scheduling disabled.  To avoid
this, follow the common practice of reporting the budget spent after
processing one ring-full of TX completions.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When set, an event is not sent whenever periodic MAC statistics are
raised.  This avoids unnecessary wake-ups.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Parity errors in different blocks of SRAM may set one of two different
interrupt flags.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>