- 22 Dec, 2011 7 commits
-
-
Jesse Sung authored
Add another vendor specific ID for BCM20702A0. output of usb-devices: T: Bus=06 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a5c ProdID=21e3 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=9439E5CBF66C C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Brian Gix authored
Low Energy pairing is performed through the SMP (Security Manager Protocol) mechanism rather than HCI. Signed-off-by: Brian Gix <bgix@codeaurora.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Brian Gix authored
To achive Man-In-The-Middle (MITM) level security with Low Energy, we have to enable User Passkey Comparison. This commit modifies the hard-coded JUST-WORKS pairing mechanism to support query via the MGMT interface of Passkey comparison and User Confirmation. Signed-off-by: Brian Gix <bgix@codeaurora.org> Acked-by: Marcel Holtmann<marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Ulisses Furquim authored
When cancelling a delayed work (timer) in L2CAP we can not sleep holding the sock mutex otherwise we might deadlock with an L2CAP timer handler. This is possible because RX/TX and L2CAP timers run in different workqueues. The scenario below illustrates the problem. Thus we are now avoiding to sleep on the timers locks. ====================================================== [ INFO: possible circular locking dependency detected ] 3.1.0-05270-ga978dc7-dirty #239 ------------------------------------------------------- kworker/1:1/873 is trying to acquire lock: (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+...}, at: [<ffffffffa002ceac>] l2cap_chan_timeout+0x3c/0xe0 [bluetooth] but task is already holding lock: ((&(&chan->chan_timer)->work)){+.+...}, at: [<ffffffff81051a86>] process_one_work+0x126/0x450 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 ((&(&chan->chan_timer)->work)){+.+...}: [<ffffffff8106b276>] check_prevs_add+0xf6/0x170 [<ffffffff8106b903>] validate_chain+0x613/0x790 [<ffffffff8106dfee>] __lock_acquire+0x4be/0xac0 [<ffffffff8106ec2d>] lock_acquire+0x8d/0xb0 [<ffffffff81052a6f>] wait_on_work+0x4f/0x160 [<ffffffff81052ca3>] __cancel_work_timer+0x73/0x80 [<ffffffff81052cbd>] cancel_delayed_work_sync+0xd/0x10 [<ffffffffa002f2ed>] l2cap_chan_connect+0x22d/0x470 [bluetooth] [<ffffffffa002fb51>] l2cap_sock_connect+0xb1/0x140 [bluetooth] [<ffffffff8130811b>] kernel_connect+0xb/0x10 [<ffffffffa00cf98a>] rfcomm_session_create+0x12a/0x1c0 [rfcomm] [<ffffffffa00cfbe7>] __rfcomm_dlc_open+0x1c7/0x240 [rfcomm] [<ffffffffa00d07c2>] rfcomm_dlc_open+0x42/0x70 [rfcomm] [<ffffffffa00d3b03>] rfcomm_sock_connect+0x103/0x150 [rfcomm] [<ffffffff8130bd7e>] sys_connect+0xae/0xc0 [<ffffffff813368d2>] compat_sys_socketcall+0xb2/0x220 [<ffffffff813b2089>] sysenter_dispatch+0x7/0x30 -> #0 (sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP){+.+...}: [<ffffffff8106b16d>] check_prev_add+0x6cd/0x6e0 [<ffffffff8106b276>] check_prevs_add+0xf6/0x170 [<ffffffff8106b903>] validate_chain+0x613/0x790 [<ffffffff8106dfee>] __lock_acquire+0x4be/0xac0 [<ffffffff8106ec2d>] lock_acquire+0x8d/0xb0 [<ffffffff8130d91a>] lock_sock_nested+0x8a/0xa0 [<ffffffffa002ceac>] l2cap_chan_timeout+0x3c/0xe0 [bluetooth] [<ffffffff81051ae4>] process_one_work+0x184/0x450 [<ffffffff8105276e>] worker_thread+0x15e/0x340 [<ffffffff81057bb6>] kthread+0x96/0xa0 [<ffffffff813b1ef4>] kernel_thread_helper+0x4/0x10 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((&(&chan->chan_timer)->work)); lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP); lock((&(&chan->chan_timer)->work)); lock(sk_lock-AF_BLUETOOTH-BTPROTO_L2CAP); *** DEADLOCK *** 2 locks held by kworker/1:1/873: #0: (events){.+.+.+}, at: [<ffffffff81051a86>] process_one_work+0x126/0x450 #1: ((&(&chan->chan_timer)->work)){+.+...}, at: [<ffffffff81051a86>] process_one_work+0x126/0x450 stack backtrace: Pid: 873, comm: kworker/1:1 Not tainted 3.1.0-05270-ga978dc7-dirty #239 Call Trace: [<ffffffff813a0f6e>] print_circular_bug+0xd2/0xe3 [<ffffffff8106b16d>] check_prev_add+0x6cd/0x6e0 [<ffffffff8106b276>] check_prevs_add+0xf6/0x170 [<ffffffff8106b903>] validate_chain+0x613/0x790 [<ffffffff8106dfee>] __lock_acquire+0x4be/0xac0 [<ffffffff8130d8f6>] ? lock_sock_nested+0x66/0xa0 [<ffffffff8106ea30>] ? lock_release_nested+0x100/0x110 [<ffffffff8130d8f6>] ? lock_sock_nested+0x66/0xa0 [<ffffffff8106ec2d>] lock_acquire+0x8d/0xb0 [<ffffffffa002ceac>] ? l2cap_chan_timeout+0x3c/0xe0 [bluetooth] [<ffffffff8130d91a>] lock_sock_nested+0x8a/0xa0 [<ffffffffa002ceac>] ? l2cap_chan_timeout+0x3c/0xe0 [bluetooth] [<ffffffff81051a86>] ? process_one_work+0x126/0x450 [<ffffffffa002ceac>] l2cap_chan_timeout+0x3c/0xe0 [bluetooth] [<ffffffff81051ae4>] process_one_work+0x184/0x450 [<ffffffff81051a86>] ? process_one_work+0x126/0x450 [<ffffffffa002ce70>] ? l2cap_security_cfm+0x4e0/0x4e0 [bluetooth] [<ffffffff8105276e>] worker_thread+0x15e/0x340 [<ffffffff81052610>] ? manage_workers+0x110/0x110 [<ffffffff81057bb6>] kthread+0x96/0xa0 [<ffffffff813b1ef4>] kernel_thread_helper+0x4/0x10 [<ffffffff813af69d>] ? retint_restore_args+0xe/0xe [<ffffffff81057b20>] ? __init_kthread_worker+0x70/0x70 [<ffffffff813b1ef0>] ? gs_change+0xb/0xb Signed-off-by: Ulisses Furquim <ulisses@profusion.mobi> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Ulisses Furquim authored
The struct hci_proto and all related register/unregister and dispatching code was removed. HCI core code now call directly the SCO and L2CAP event functions. Signed-off-by: Ulisses Furquim <ulisses@profusion.mobi> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Andrei Emeltchenko authored
Make code readable by removing magic numbers. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Gustavo F. Padovan authored
No local_bh_disable is needed there once we run everything in process context. The same goes for the replacement of bh_lock_sock() by lock_sock(). Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
- 21 Dec, 2011 3 commits
-
-
Ulisses Furquim authored
The handling of SCO audio links and the L2CAP protocol are essential to any system with Bluetooth thus are always compiled in from now on. Signed-off-by: Ulisses Furquim <ulisses@profusion.mobi> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Ulisses Furquim authored
The hci_task_lock mutex (previously a lock) was supposed to protect the register/unregister of HCI protocols against RX/TX tasks. This will not be needed anymore because SCO and L2CAP will always be compiled. Moreover, with the recent move of RX/TX to workqueues per device the global hci_task_lock was causing starvation between different HCI devices. Signed-off-by: Ulisses Furquim <ulisses@profusion.mobi> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Bing Zhao authored
For high-speed/super-speed isochronous endpoints, the bInterval value is used as exponent, 2^(bInterval-1). Luckily we have usb_fill_int_urb() function that handles it correctly. So we just call this function to fill in the RX URB. Cc: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Bing Zhao <bzhao@marvell.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
- 20 Dec, 2011 7 commits
-
-
Gustavo F. Padovan authored
It makes more sense this way, since info_timer is a timer using delayed work API. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Gustavo F. Padovan authored
This one also needs to run in process context Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Gustavo F. Padovan authored
It is the only place where it is used. Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Andrei Emeltchenko authored
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Andrei Emeltchenko authored
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Andrei Emeltchenko authored
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
Andrei Emeltchenko authored
Current controller initialization is moved tp bredr_init and new function added amp_init to handle later AMP init sequence. Current AMP init sequence include Reset and Read Local Version. Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
-
- 19 Dec, 2011 23 commits
-
-
Yogesh Ashok Powar authored
The commit 42624d49 created following sparse warning >net/mac80211/sta_info.c:965:24: warning: incorrect type in assignment (different address spaces) >net/mac80211/sta_info.c:965:24: expected struct tid_ampdu_tx *tid_tx >net/mac80211/sta_info.c:965:24: got struct tid_ampdu_tx [noderef] <asn:4>*<noident> Making use of rcu_dereference_protected to fix the problem. V2: - Replacing rcu_dereference with rcu_dereference_protected as suggested by Johannes. - Adding mutex_lock/unlock to satisfy the condition at rcu_dereference_protected Cc: Nishant Sarmukadam <nishants@marvell.com> Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Felix Fietkau authored
The commit "ath9k: simplify tx locking" introduced a soft lockup triggered by mac80211 sending a BAR frame triggered by a driver call to ieee80211_tx_send_bar or ieee80211_tx_status. Fix these issues by queueing processed tx status skbs and submitting them to mac80211 outside of the lock. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Felix Fietkau authored
Many systems (e.g. embedded systems) do not have wifi modules connected to bluetooth modules, so bluetooth coexistence is irrelevant there. With the addition of MCI support, ath9k picked up quite a bit of extra code that can be compiled out this way. This patch redefines ATH9K_HW_CAP_MCI and adds an inline wrapper for querying the bluetooth coexistence scheme, allowing the compiler to eliminate code that uses it, with only very little use of #ifdef. On MIPS this reduces the total size for the modules by about 20k. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rafał Miłecki authored
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rafał Miłecki authored
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rafał Miłecki authored
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rafał Miłecki authored
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rafał Miłecki authored
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rafał Miłecki authored
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rafał Miłecki authored
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rafał Miłecki authored
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Larry Finger authored
When I tested commit 6539306b, I did not notice that loading an out-of-tree module turns off lockdep testing in kernel 3.2. For that reason, I missed the kernel WARNING shown below: The solution fixes the warning by partially reverting commit 6539306b. [ 84.168146] ------------[ cut here ]------------ [ 84.168155] WARNING: at kernel/mutex.c:198 mutex_lock_nested+0x309/0x310() [ 84.168158] Hardware name: HP Pavilion dv2700 Notebook PC [ 84.168161] Modules linked in: nfs lockd auth_rpcgss nfs_acl sunrpc af_packet cpufreq_conservative cpufreq_userspace cpufreq_powersave powernow_k8 mperf e xt3 jbd ide_cd_mod cdrom snd_hda_codec_conexant arc4 rtl8192ce ide_pci_generic rtl8192c_common rtlwifi snd_hda_intel mac80211 snd_hda_codec snd_pcm snd_timer amd74xx ide_core cfg80211 k8temp snd joydev soundcore hwmon battery forcedeth i2c_nforce2 sg rfkill ac serio_raw snd_page_alloc button video i2c_core ipv6 a utofs4 ext4 mbcache jbd2 crc16 sd_mod ahci ohci_hcd libahci libata scsi_mod ehci_hcd usbcore usb_common fan processor thermal [ 84.168231] Pid: 1218, comm: kworker/u:2 Not tainted 3.2.0-rc5-wl+ #155 [ 84.168234] Call Trace: [ 84.168240] [<ffffffff81048aaa>] warn_slowpath_common+0x7a/0xb0 [ 84.168245] [<ffffffff81048af5>] warn_slowpath_null+0x15/0x20 [ 84.168249] [<ffffffff813811f9>] mutex_lock_nested+0x309/0x310 [ 84.168269] [<ffffffffa00793f9>] ? rtl_ips_nic_on+0x49/0xb0 [rtlwifi] [ 84.168277] [<ffffffffa00793f9>] rtl_ips_nic_on+0x49/0xb0 [rtlwifi] [ 84.168284] [<ffffffffa007ab85>] rtl_pci_tx+0x1b5/0x560 [rtlwifi] [ 84.168291] [<ffffffffa007635a>] rtl_op_tx+0x9a/0xa0 [rtlwifi] [ 84.168359] [<ffffffffa043cf51>] __ieee80211_tx+0x181/0x2b0 [mac80211] [ 84.168375] [<ffffffffa043ef06>] ieee80211_tx+0xf6/0x120 [mac80211] [ 84.168391] [<ffffffffa043ee49>] ? ieee80211_tx+0x39/0x120 [mac80211] [ 84.168408] [<ffffffffa043f80b>] ieee80211_xmit+0xdb/0x100 [mac80211] [ 84.168425] [<ffffffffa043f730>] ? ieee80211_skb_resize.isra.26+0xb0/0xb0 [mac80211] [ 84.168441] [<ffffffffa0440b2a>] ieee80211_tx_skb_tid+0x5a/0x70 [mac80211] [ 84.168458] [<ffffffffa0443da2>] ieee80211_send_auth+0x152/0x1b0 [mac80211] [ 84.168474] [<ffffffffa042e169>] ieee80211_work_work+0x1049/0x1860 [mac80211] [ 84.168489] [<ffffffffa042d120>] ? free_work+0x20/0x20 [mac80211] [ 84.168504] [<ffffffffa042d120>] ? free_work+0x20/0x20 [mac80211] [ 84.168510] [<ffffffff81065ffc>] process_one_work+0x17c/0x530 [ 84.168514] [<ffffffff81065f92>] ? process_one_work+0x112/0x530 [ 84.168519] [<ffffffff81066994>] worker_thread+0x164/0x350 [ 84.168524] [<ffffffff8108420d>] ? trace_hardirqs_on+0xd/0x10 [ 84.168528] [<ffffffff81066830>] ? manage_workers.isra.28+0x220/0x220 [ 84.168533] [<ffffffff8106bc17>] kthread+0x87/0x90 [ 84.168539] [<ffffffff813854b4>] kernel_thread_helper+0x4/0x10 [ 84.168543] [<ffffffff81382bdd>] ? retint_restore_args+0xe/0xe [ 84.168547] [<ffffffff8106bb90>] ? __init_kthread_worker+0x70/0x70 [ 84.168552] [<ffffffff813854b0>] ? gs_change+0xb/0xb [ 84.168554] ---[ end trace f25a4fdc768c028f ]--- Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stanislaw Gruska <sgruszka@redhat.com> Cc: Chaoming Li <chaoming_li@realsil.com.cn> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Franky Lin authored
This patch adds a Kconfig option for SDIO bus support and abstracts a build subset correspondingly. It's the final patch of fullmac bus interface refactoring. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Franky Lin authored
This patch removes some headers files include lines from sdio layer code. This is part of the fullmac bus interface refactoring. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Franky Lin authored
The idle macros are only used by dhd_sdio.c. It's more appropriate to place them in dhd_sdio.c instead of dhd.h. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Franky Lin authored
Debug message level macros are used for debug purpose. It would be more appropriate to place them at dhd_dbg.h. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Franky Lin authored
Abstract bus layer brcmf_bus_txctl/brcmf_bus_rxctl function pointers for common layer. This patch is part of the fullmac bus interface refactoring. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Franky Lin authored
Abstract bus layer brcmf_bus_txdata function pointer for common layer. This patch is part of the fullmac bus interface refactoring. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Franky Lin authored
Abstract bus layer brcmf_bus_init function pointer for common layer. This patch is part of the fullmac bus interface refactoring. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Franky Lin authored
dhd_bus.h is the header file for bus interface. Move functions declarations and brcmf_bus structure to there. This is part of the fullmac bus interface refactoring. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Franky Lin authored
Common layer should use interface function pointer stored in brcmf_bus to invoke corresponding interface function in bus layer. This patch is part of the fullmac bus interface refactoring. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Franky Lin authored
dhd_bus.h will be used as the shared header file for common layer and bus layer. It should not contain any sdio specific macros. This patch moves them to sdio_host.h as part of the fullmac bus interface refactoring. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Franky Lin authored
brcmf_sdio is the data structure for sdio bus layer. Stop referencing brcmf_sdio from common layer. This patch is part of the fullmac bus interface refactoring. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-