- 11 Jun, 2019 13 commits
-
-
Jakub Kicinski authored
Set ethtool TLS RX feature based on NIC capabilities, and enable TLS RX when connections are added for decryption. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dirk van der Merwe authored
Enable kernel-controlled RX resync and propagate TLS connection RX resync from kernel TLS to firmware. Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Some control messages must be sent from atomic context. The mailbox takes sleeping locks and uses a waitqueue so add a "posted" version of communication. Trylock the semaphore and if that's successful kick of the device communication. The device communication will be completed from a workqueue, which will also release the semaphore. If locks are taken queue the message and return. Schedule a different workqueue to take the semaphore and run the communication. Note that the there are currently no atomic users which would actually need the return value, so all replies to posted messages are just freed. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
We need the name nfp_ccm_mbox_alloc() for allocating the mailbox communication channel itself. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dirk van der Merwe authored
Firmware indicates when a packet has been decrypted by reusing the currently unused BPF flag. Transfer this information into the skb and provide a statistic of all decrypted segments. Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
TLS offload device may lose sync with the TCP stream if packets arrive out of order. Drivers can currently request a resync at a specific TCP sequence number. When a record is found starting at that sequence number kernel will inform the device of the corresponding record number. This requires the device to constantly scan the stream for a known pattern (constant bytes of the header) after sync is lost. This patch adds an alternative approach which is entirely under the control of the kernel. Kernel tracks records it had to fully decrypt, even though TLS socket is in TLS_HW mode. If multiple records did not have any decrypted parts - it's a pretty strong indication that the device is out of sync. We choose the min number of fully encrypted records to be 2, which should hopefully be more than will get retransmitted at a time. After kernel decides the device is out of sync it schedules a resync request. If the TCP socket is empty the resync gets performed immediately. If socket is not empty we leave the record parser to resync when next record comes. Before resync in message parser we peek at the TCP socket and don't attempt the sync if the socket already has some of the next record queued. On resync failure (encrypted data continues to flow in) we retry with exponential backoff, up to once every 128 records (with a 16k record thats at most once every 2M of data). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
handle_device_resync() doesn't describe the function very well. The function checks if resync should be issued upon parsing of a new record. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
TLS offload code casts record number to a u64. The buffer should be aligned to 8 bytes, but its actually a __be64, and the rest of the TLS code treats it as big int. Make the offload callbacks take a byte array, drivers can make the choice to do the ugly cast if they want to. Prepare for copying the record number onto the stack by defining a constant for max size of the byte array. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
We subtract "TLS_HEADER_SIZE - 1" from req_seq, then if they match we add the same constant to seq. Just add it to seq, and we don't have to touch req_seq. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mao Wenan authored
The variable 'status' in __packet_lookup_frame_in_block() is never used since introduction in commit f6fb8f10 ("af-packet: TPACKET_V3 flexible buffer implementation."), we can remove it. Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Taehee Yoo authored
ASSERT_OVSL() in ovs_vport_del() is unnecessary because ovs_vport_del() is only called by ovs_dp_detach_port() and ovs_dp_detach_port() calls ASSERT_OVSL() too. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Reviewed-by: Greg Rose <gvrose8192@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Taehee Yoo authored
netlink_walk_start() needed to return an error code because of rhashtable_walk_init(). but that was converted to rhashtable_walk_enter() and it is a void type function. so now netlink_walk_start() doesn't need any return value. Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stefano Brivio authored
This test checks that route exceptions can be successfully listed and flushed using ip -6 route {list,flush} cache. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 10 Jun, 2019 27 commits
-
-
David S. Miller authored
David Ahern says: ==================== net: Enable nexthop objects with IPv4 and IPv6 routes This is the final set of the initial nexthop object work. When I started this idea almost 2 years ago, it took 18 seconds to inject 700k+ IPv4 routes with 1 hop and about 28 seconds for 4-paths. Some of that time was due to inefficiencies in 'ip', but most of it was kernel side with excessive synchronize_rcu calls in ipv4, and redundant processing validating a nexthop spec (device, gateway, encap). Worse, the time increased dramatically as the number of legs in the routes increased; for example, taking over 72 seconds for 16-path routes. After this set, with increased dirty memory limits (fib_sync_mem sysctl), an improved ip and nexthop objects a full internet fib (743,799 routes based on a pull in January 2019) can be pushed to the kernel in 4.3 seconds. Even better, the time to insert is "almost" constant with increasing number of paths. The 'almost constant' time is due to expanding the nexthop definitions when generating notifications. A follow on patch will be sent adding a sysctl that allows an admin to avoid the nexthop expansion and truly get constant route insert time regardless of the number of paths in a route! (Useful once all programs used for a deployment that care about routes understand nexthop objects). To be clear, 'ip' is used for benchmarking for no other reason than 'ip -batch' is a trivial to use for the tests. FRR, for example, better manages nexthops and route changes and the way those are pushed to the kernel and thus will have less userspace processing times than 'ip -batch'. Patches 1-10 iterate over fib6_nh with a nexthop invoke a processing function per fib6_nh. Prior to nexthop objects, a fib6_info referenced a single fib6_nh. Multipath routes were added as separate fib6_info for each leg of the route and linked as siblings: f6i -> sibling -> sibling ... -> sibling | | +--------- multipath route ---------+ With nexthop objects a single fib6_info references an external nexthop which may have a series of fib6_nh: f6i ---> nexthop ---> fib6_nh ... fib6_nh making IPv6 routes similar to IPv4. The side effect is that a single fib6_info now indirectly references a series of fib6_nh so the code needs to walk each entry and call the local, per-fib6_nh processing function. Patches 11 and 13 wire up use of nexthops with fib entries for IPv4 and IPv6. With these commits you can actually use nexthops with routes. Patch 12 is an optimization for IPv4 when using nexthops in the most predominant use case (no metrics). Patches 14 handles replace of a nexthop config. Patches 15-18 add update pmtu and redirect tests to use both old and new routing. Patches 19 and 20 add new tests for the nexthop infrastructure. The first is single nexthop is used by multiple prefixes to communicate with remote hosts. This is on top of the functional tests already committed. The second verifies multipath selection. v4 - changed return to 'goto out' in patch 9 since the rcu_read_lock is held (noticed by Wei) v3 - removed found arg in patch 7 and changed rt6_nh_remove_exception_rt to return 1 when a match is found for an exception v2 - changed ++i to i++ in patches 1 and 14 as noticed by DaveM - improved commit message for patch 14 (nexthop replace) - removed the skip_fib argument to remove_nexthop; vestige of an older design ==================== Reviewed-By: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Add a version of router_multipath.sh that uses nexthop objects for routes. Ido requested a version that does not cause regressions with mlxsw testing since it does not support nexthop objects yet. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Add tests where multiple FIB entries use the same nexthop object. Generate per-cpu cached routes for each by running ping on each cpu, and then generate exceptions unique to each prefix (remote host) with different mtus. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Add a second pass to icmp_redirect.sh to use nexthop objects for routes. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Add routing setup using nexthop objects and repeat tests with old and new routing. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Move the route add commands to a new function called setup_routing_old. The '_old' refers to the classic way of installing routes. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Move the block of code that runs a test and prints the verdict to a new function, run_test. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Add support for atomically upating a nexthop config. When updating a nexthop, walk the lists of associated fib entries and verify the new config is valid. Replace is done by swapping nh_info for single nexthops - new config is applied to old nexthop struct, and old config is moved to new nexthop struct. For nexthop groups the same applies but for nh_group. In addition for groups the nh_parent reference needs to be updated. The old config is released by calling __remove_nexthop on the 'new' nexthop which now has the old config. This is done to avoid messing around with the list_heads that track which fib entries are using the nexthop. After the swap of config data, bump the sequence counters for FIB entries to invalidate any dst entries and send notifications to userspace. The notifications include the new nexthop spec as well as any fib entries using the updated nexthop struct. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Add support for RTA_NH_ID attribute to allow a user to specify a nexthop id to use with a route. fc_nh_id is added to fib6_config to hold the value passed in the RTA_NH_ID attribute. If a nexthop id is given, the gateway, device, encap and multipath attributes can not be set. Update ip6_route_del to check metric and protocol before nexthop specs. If fc_nh_id is set, then it must match the id in the route entry. Since IPv6 allows delete of a cached entry (an exception), add ip6_del_cached_rt_nh to cycle through all of the fib6_nh in a fib entry if it is using a nexthop. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Be optimistic about re-using a fib_info when nexthop id is given and the route does not use metrics. Avoids a memory allocation which in most cases is expected to be freed anyways. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Add support for RTA_NH_ID attribute to allow a user to specify a nexthop id to use with a route. fc_nh_id is added to fib_config to hold the value passed in the RTA_NH_ID attribute. If a nexthop id is given, the gateway, device, encap and multipath attributes can not be set. Update fib_nh_match to check ids on a route delete. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Use nexthop_for_each_fib6_nh to call fib6_nh_mtu_change for each fib6_nh in a nexthop for rt6_mtu_change_route. For __ip6_rt_update_pmtu, we need to find the nexthop that correlates to the device and gateway in the rt6_info. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Use nexthop_for_each_fib6_nh and fib6_nh_find_match to find the fib6_nh in a nexthop that correlates to the device and gateway in the rt6_info. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Add a hook in __ip6_route_redirect to handle a nexthop struct in a fib6_info. Use nexthop_for_each_fib6_nh and fib6_nh_redirect_match to call ip6_redirect_nh_match for each fib6_nh looking for a match. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Add a hook in rt6_flush_exceptions, rt6_remove_exception_rt, rt6_update_exception_stamp_rt, and rt6_age_exceptions to handle nexthop struct in a fib6_info. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Add a hook in fib6_info_uses_dev to handle nexthop struct in a fib6_info. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Add a hook in rt6_nlmsg_size to handle nexthop struct in a fib6_info. rt6_nh_nlmsg_size is used to sum the space needed for all nexthops in the fib entry. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Add a hook in __find_rr_leaf to handle nexthop struct in a fib6_info. nexthop_for_each_fib6_nh is used to walk each fib6_nh in a nexthop and call find_match. On a match, use the fib6_nh saved in the callback arg to setup fib6_result. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Add a hook in rt6_device_match to handle nexthop struct in a fib6_info. The new rt6_nh_dev_match uses nexthop_for_each_fib6_nh to walk each fib6_nh in a nexthop and call __rt6_device_match. On match, rt6_nh_dev_match returns the fib6_nh and rt6_device_match uses it to setup fib6_result. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
Use nexthop_for_each_fib6_nh to walk all fib6_nh in a nexthop when dropping 'from' reference in pcpu routes. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
IPv6 has traditionally had a single fib6_nh per fib6_info. With nexthops we can have multiple fib6_nh associated with a fib6_info. Add a nexthop helper to invoke a callback for each fib6_nh in a 'struct nexthop'. If the callback returns non-0, the loop is stopped and the return value passed to the caller. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YueHaibing authored
Fix sparse warning: net/ipv4/tcp_fastopen.c:75:29: warning: symbol 'tcp_fastopen_alloc_ctx' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Jason Baron <jbaron@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Heiner Kallweit says: ==================== r8169: improve handling of chip-specific configuration This series improves and simplifies handling of chip-specific configuration. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
Simplify the code by removing struct rtl_cfg_info. Only info we need per PCI ID is whether it supports GBit or not. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
To prepare removal of struct rtl_cfg_info, set the coalesce config based on the chip version number. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
After the latest changes we don't need separate functions rtl_hw_start_8168 and rtl_hw_start_8101 any longer. This allows us to simplify the code. For this change we need to move rtl_hw_start() and rtl_hw_start_8169(). rtl_hw_start_8169() is unchanged. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
CPCMD_QUIRK_MASK isn't specific to certain chip versions. The vendor driver applies this mask to all 8168 versions. Therefore remove QUIRK from the mask name and apply it on all chip versions. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-