- 13 Aug, 2021 3 commits
-
-
Srinivas Kandagatla authored
For some reason we ended up using wrong device in some places for pm_runtime calls. Fix this so that NGG driver can do runtime pm correctly. Fixes: 917809e2 ("slimbus: ngd: Add qcom SLIMBus NGD driver") Cc: <stable@vger.kernel.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210809082428.11236-4-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Srinivas Kandagatla authored
In some usecases transaction ids are dynamically allocated inside the controller driver after sending the messages which have generic acknowledge responses. So check for this before refcounting pm_runtime. Without this we would end up imbalancing runtime pm count by doing pm_runtime_put() in both slim_do_transfer() and slim_msg_response() for a single pm_runtime_get() in slim_do_transfer() Fixes: d3062a21 ("slimbus: messaging: add slim_alloc/free_txn_tid()") Cc: <stable@vger.kernel.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210809082428.11236-3-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Srinivas Kandagatla authored
As tid is unsigned its hard to figure out if the tid is valid or invalid. So Start the transaction ids from 1 instead of zero so that we could differentiate between a valid tid and invalid tids This is useful in cases where controller would add a tid for controller specific transfers. Fixes: d3062a21 ("slimbus: messaging: add slim_alloc/free_txn_tid()") Cc: <stable@vger.kernel.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210809082428.11236-2-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 08 Aug, 2021 9 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Thomas Gleixner: "A single timer fix: - Prevent a memory ordering issue in the timer expiry code which makes it possible to observe falsely that the callback has been executed already while that's not the case, which violates the guarantee of del_timer_sync()" * tag 'timers-urgent-2021-08-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timers: Move clearing of base::timer_running under base:: Lock
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Thomas Gleixner: "A single scheduler fix: - Prevent a double enqueue caused by rt_effective_prio() being invoked twice in __sched_setscheduler()" * tag 'sched-urgent-2021-08-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/rt: Fix double enqueue caused by rt_effective_prio
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: "A set of perf fixes: - Correct the permission checks for perf event which send SIGTRAP to a different process and clean up that code to be more readable. - Prevent an out of bound MSR access in the x86 perf code which happened due to an incomplete limiting to the actually available hardware counters. - Prevent access to the AMD64_EVENTSEL_HOSTONLY bit when running inside a guest. - Handle small core counter re-enabling correctly by issuing an ACK right before reenabling it to prevent a stale PEBS record being kept around" * tag 'perf-urgent-2021-08-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Apply mid ACK for small core perf/x86/amd: Don't touch the AMD64_EVENTSEL_HOSTONLY bit inside the guest perf/x86: Fix out of bound MSR access perf: Refactor permissions check into perf_check_permission() perf: Fix required permissions if sigtrap is requested
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are some small char/misc driver fixes for 5.14-rc5. They resolve a few regressions that people reported: - acrn driver fix - fpga driver fix - interconnect tiny driver fixes All have been in linux-next for a while with no reported issues" * tag 'char-misc-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: interconnect: Fix undersized devress_alloc allocation interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate interconnect: qcom: icc-rpmh: Ensure floor BW is enforced for all nodes fpga: dfl: fme: Fix cpu hotplug issue in performance reporting virt: acrn: Do hcall_destroy_vm() before resource release interconnect: Always call pre_aggregate before aggregate interconnect: Zero initial BW after sync-state
-
Linus Torvalds authored
Merge tag 'driver-core-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are three tiny driver core and firmware loader fixes for 5.14-rc5. They are: - driver core fix for when probing fails - firmware loader fixes for reported problems. All have been in linux-next for a while with no reported issues" * tag 'driver-core-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: firmware_loader: fix use-after-free in firmware_fallback_sysfs firmware_loader: use -ETIMEDOUT instead of -EAGAIN in fw_load_sysfs_fallback drivers core: Fix oops when driver probe fails
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver fixes from Greg KH: "Here are a few small staging driver fixes for 5.14-rc5 to resolve some reported problems. They include: - mt7621 driver fix - rtl8723bs driver fixes - rtl8712 driver fixes. Nothing major, just small problems resolved. All have been in linux-next for a while with no reported issues" * tag 'staging-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: mt7621-pci: avoid to re-disable clock for those pcies not in use staging: rtl8712: error handling refactoring staging: rtl8712: get rid of flush_scheduled_work staging: rtl8723bs: select CONFIG_CRYPTO_LIB_ARC4 staging: rtl8723bs: Fix a resource leak in sd_int_dpc
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial fixes from Greg KH: "Here are some small tty/serial driver fixes for 5.14-rc5 to resolve a number of reported problems. They include: - mips serial driver fixes - 8250 driver fixes for reported problems - fsl_lpuart driver fixes - other tiny driver fixes All have been in linux-next for a while with no reported problems" * tag 'tty-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: 8250_pci: Avoid irq sharing for MSI(-X) interrupts. serial: 8250_mtk: fix uart corruption issue when rx power off tty: serial: fsl_lpuart: fix the wrong return value in lpuart32_get_mctrl serial: 8250_pci: Enumerate Elkhart Lake UARTs via dedicated driver serial: 8250: fix handle_irq locking serial: tegra: Only print FIFO error message when an error occurs MIPS: Malta: Do not byte-swap accesses to the CBUS UART serial: 8250: Mask out floating 16/32-bit bus bits serial: max310x: Unprepare and disable clock in error path
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB driver fixes from Greg KH: "Here are some small USB driver fixes for 5.14-rc5. They resolve a number of small reported issues, including: - cdnsp driver fixes - usb serial driver fixes and device id updates - usb gadget hid fixes - usb host driver fixes - usb dwc3 driver fixes - other usb gadget driver fixes All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (21 commits) usb: typec: tcpm: Keep other events when receiving FRS and Sourcing_vbus events usb: dwc3: gadget: Avoid runtime resume if disabling pullup usb: dwc3: gadget: Use list_replace_init() before traversing lists USB: serial: ftdi_sio: add device ID for Auto-M3 OP-COM v2 USB: serial: pl2303: fix GT type detection USB: serial: option: add Telit FD980 composition 0x1056 USB: serial: pl2303: fix HX type detection USB: serial: ch341: fix character loss at high transfer rates usb: cdnsp: Fix the IMAN_IE_SET and IMAN_IE_CLEAR macro usb: cdnsp: Fixed issue with ZLP usb: cdnsp: Fix incorrect supported maximum speed usb: cdns3: Fixed incorrect gadget state usb: gadget: f_hid: idle uses the highest byte for duration Revert "thunderbolt: Hide authorized attribute if router does not support PCIe tunnels" usb: otg-fsm: Fix hrtimer list corruption usb: host: ohci-at91: suspend/resume ports after/before OHCI accesses usb: musb: Fix suspend and resume issues for PHYs on I2C and SPI usb: gadget: f_hid: added GET_IDLE and SET_IDLE handlers usb: gadget: f_hid: fixed NULL pointer dereference usb: gadget: remove leaked entry from udc driver list ...
-
- 07 Aug, 2021 6 commits
-
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring from Jens Axboe: "A few io-wq related fixes: - Fix potential nr_worker race and missing max_workers check from one path (Hao) - Fix race between worker exiting and new work queue (me)" * tag 'io_uring-5.14-2021-08-07' of git://git.kernel.dk/linux-block: io-wq: fix lack of acct->nr_workers < acct->max_workers judgement io-wq: fix no lock protection of acct->nr_worker io-wq: fix race between worker exiting and activating free worker
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "A few minor fixes: - Fix ldm kernel-doc warning (Bart) - Fix adding offset twice for DMA address in n64cart (Christoph) - Fix use-after-free in dasd path handling (Stefan) - Order kyber insert trace correctly (Vincent) - raid1 errored write handling fix (Wei) - Fix blk-iolatency queue get failure handling (Yu)" * tag 'block-5.14-2021-08-07' of git://git.kernel.dk/linux-block: kyber: make trace_block_rq call consistent with documentation block/partitions/ldm.c: Fix a kernel-doc warning blk-iolatency: error out if blk_get_queue() failed in iolatency_set_limit() n64cart: fix the dma address in n64cart_do_bvec s390/dasd: fix use after free in dasd path handling md/raid10: properly indicate failure when ending a failed write request
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Palmer Dabbelt: - avoid dereferencing a null task pointer while walking the stack - fix the memory size in the HiFive Unleashed device tree - disable stack protectors when randstruct is enabled, which results in non-deterministic offsets during module builds - a pair of fixes to avoid relying on a constant physical memory base for the non-XIP builds * tag 'riscv-for-linus-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: Revert "riscv: Remove CONFIG_PHYS_RAM_BASE_FIXED" riscv: Get rid of CONFIG_PHYS_RAM_BASE in kernel physical address conversion riscv: Disable STACKPROTECTOR_PER_TASK if GCC_PLUGIN_RANDSTRUCT is enabled riscv: dts: fix memory size for the SiFive HiFive Unmatched riscv: stacktrace: Fix NULL pointer dereference
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Correct the Extended Regular Expressions in tools - Adjust scripts/checkversion.pl for the current Kbuild - Unset sub_make_done for 'make install' to make DKMS work again * tag 'kbuild-fixes-v5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: cancel sub_make_done for the install target to fix DKMS scripts: checkversion: modernize linux/version.h search strings mips: Fix non-POSIX regexp x86/tools/relocs: Fix non-POSIX regexp
-
Alexandre Ghiti authored
This reverts commit 9b79878c. The removal of this config exposes CONFIG_PHYS_RAM_BASE for all kernel types: this value being implementation-specific, this breaks the genericity of the RISC-V kernel so revert it. Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Tested-by: Emil Renner Berthing <kernel@esmil.dk> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
Alexandre Ghiti authored
The usage of CONFIG_PHYS_RAM_BASE for all kernel types was a mistake: this value is implementation-specific and this breaks the genericity of the RISC-V kernel. Fix this by introducing a new variable phys_ram_base that holds this value at runtime and use it in the kernel physical address conversion macro. Since this value is used only for XIP kernels, evaluate it only if CONFIG_XIP_KERNEL is set which in addition optimizes this macro for standard kernels at compile-time. Signed-off-by: Alexandre Ghiti <alex@ghiti.fr> Tested-by: Emil Renner Berthing <kernel@esmil.dk> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Fixes: 44c92257 ("RISC-V: enable XIP") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-
- 06 Aug, 2021 22 commits
-
-
Vincent Fu authored
The kyber ioscheduler calls trace_block_rq_insert() *after* the request is added to the queue but the documentation for trace_block_rq_insert() says that the call should be made *before* the request is added to the queue. Move the tracepoint for the kyber ioscheduler so that it is consistent with the documentation. Signed-off-by: Vincent Fu <vincent.fu@samsung.com> Link: https://lore.kernel.org/r/20210804194913.10497-1-vincent.fu@samsung.com Reviewed by: Adam Manzanares <a.manzanares@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "A regression fix, bug fix, and a comment cleanup for ext4" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix potential htree corruption when growing large_dir directories ext4: remove conflicting comment from __ext4_forget ext4: fix potential uninitialized access to retval in kmmpd
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: "Fix tracepoint race between static_call and callback data As callbacks to a tracepoint are paired with the data that is passed in when the callback is registered to the tracepoint, it must have that data passed to the callback when the tracepoint is triggered, else bad things will happen. To keep the two together, they are both assigned to a tracepoint structure and added to an array. The tracepoint call site will dereference the structure (via RCU) and call the callback in that structure along with the data in that structure. This keeps the callback and data tightly coupled. Because of the overhead that retpolines have on tracepoint callbacks, if there's only one callback attached to a tracepoint (a common case), then it is called via a static call (code modified to do a direct call instead of an indirect call). But to implement this, the data had to be decoupled from the callback, as now the callback is implemented via a direct call from the static call and not an indirect call from the dereferenced structure. Note, the static call only calls a callback used when there's a single callback attached to the tracepoint. If more than one callback is attached to the same tracepoint, then the static call will call an iterator function that goes back to dereferencing the structure keeping the callback and its data tightly coupled again. Issues can arise when going from 0 callbacks to one, as the static call is assigned to the callback, and it must take care that the data passed to it is loaded before the static call calls the callback. Going from 1 to 2 callbacks is not an issue, as long as the static call is updated to the iterator before the tracepoint structure array is updated via RCU. Going from 2 to more or back down to 2 is not an issue as the iterator can handle all theses cases. But going from 2 to 1, care must be taken as the static call is now calling a callback and the data that is loaded must be the data for that callback. Care was taken to ensure the callback and data would be in-sync, but after a bug was reported, it became clear that not enough was done to make sure that was the case. These changes address this. The first change is to compare the old and new data instead of the old and new callback, as it's the data that can corrupt the callback, even if the callback is the same (something getting freed). The next change is to convert these transitions into states, to make it easier to know when a synchronization is needed, and to perform those synchronizations. The problem with this patch is that it slows down disabling all events from under a second, to making it take over 10 seconds to do the same work. But that is addressed in the final patch. The final patch uses the RCU state functions to keep track of the RCU state between the transitions, and only needs to perform the synchronization if an RCU synchronization hasn't been done already. This brings the performance of disabling all events back to its original value. That's because no synchronization is required between disabling tracepoints but is required when enabling a tracepoint after its been disabled. If an RCU synchronization happens after the tracepoint is disabled, and before it is re-enabled, there's no need to do the synchronization again. Both the second and third patch have subtle complexities that they are separated into two patches. But because the second patch causes such a regression in performance, the third patch adds a "Fixes" tag to the second patch, such that the two must be backported together and not just the second patch" * tag 'trace-v5.14-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracepoint: Use rcu get state and cond sync for static call updates tracepoint: Fix static call function vs data state mismatch tracepoint: static call: Compare data on transition from 2->1 callees
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "Fix a recent regression in the timer events oriented (TEO) cpuidle governor causing it to misbehave when idle state 0 is disabled and rename two local variables for improved clarity on top of that" * tag 'pm-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpuidle: teo: Rename two local variables in teo_select() cpuidle: teo: Fix alternative idle state lookup
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fix from Rafael Wysocki: "Revert a recent ACPICA commit causing boot issues to appear on some systems" * tag 'acpi-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPICA: Fix memory leak caused by _CID repair function"
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC fixes from Arnd Bergmann: "Lots of small fixes for Arm SoCs this time, nothing too worrying: - omap/beaglebone boot regression fix in gpt12 timer - revert for i.mx8 soc driver breaking as a platform_driver - kexec/kdump fixes for op-tee - various fixes for incorrect DT settings on imx, mvebu, omap, stm32, and tegra causing problems. - device tree fixes for static checks in nomadik, versatile, stm32 - code fixes for issues found in build testing and with static checking on tegra, ixp4xx, imx, omap" * tag 'soc-fixes-5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (36 commits) soc: ixp4xx/qmgr: fix invalid __iomem access soc: ixp4xx: fix printing resources ARM: ixp4xx: goramo_mlr depends on old PCI driver ARM: ixp4xx: fix compile-testing soc drivers soc/tegra: Make regulator couplers depend on CONFIG_REGULATOR ARM: dts: nomadik: Fix up interrupt controller node names ARM: dts: stm32: Fix touchscreen IRQ line assignment on DHCOM ARM: dts: stm32: Disable LAN8710 EDPD on DHCOM ARM: dts: stm32: Prefer HW RTC on DHCOM SoM omap5-board-common: remove not physically existing vdds_1v8_main fixed-regulator ARM: dts: am437x-l4: fix typo in can@0 node ARM: dts: am43x-epos-evm: Reduce i2c0 bus speed for tps65218 bus: ti-sysc: AM3: RNG is GP only ARM: omap2+: hwmod: fix potential NULL pointer access arm64: dts: armada-3720-turris-mox: remove mrvl,i2c-fast-mode arm64: dts: armada-3720-turris-mox: fixed indices for the SDHC controllers ARM: dts: imx: Swap M53Menlo pinctrl_power_button/pinctrl_power_out pins ARM: imx: fix missing 3rd argument in macro imx_mmdc_perf_init ARM: dts: colibri-imx6ull: limit SDIO clock to 25MHz arm64: dts: ls1028: sl28: fix networking for variant 2 ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Will Deacon: "It's all pretty minor but the main fix is sorting out how we deal with return values from 32-bit system calls as audit expects error codes to be sign-extended to 64 bits Summary: - Fix extension/truncation of return values from 32-bit system calls - Fix interaction between unwinding and tracing - Fix spurious toolchain warning emitted during make - Fix Kconfig help text for RANDOMIZE_MODULE_REGION_FULL" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: stacktrace: avoid tracing arch_stack_walk() arm64: stacktrace: fix comment arm64: fix the doc of RANDOMIZE_MODULE_REGION_FULL arm64: move warning about toolchains to archprepare arm64: fix compat syscall return truncation
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS fix from Thomas Bogendoerfer: "Fix PMD accounting change" * tag 'mips-fixes_5.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: check return value of pgtable_pmd_page_ctor
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds authored
Pull spi fixes from Mark Brown: "A small collection of fixes for SPI, small mostly driver specific things plus a fix for module autoloading which hadn't been working properly for DT systems" * tag 'spi-fix-v5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: cadence-quadspi: Fix check condition for DTR ops spi: mediatek: Fix fifo transfer spi: imx: mx51-ecspi: Fix CONFIGREG delay comment spi: imx: mx51-ecspi: Fix low-speed CONFIGREG delay calculation spi: update modalias_show after of_device_uevent_modalias support spi: meson-spicc: fix memory leak in meson_spicc_remove spi: spi-mux: Add module info needed for autoloading
-
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengineLinus Torvalds authored
Pull dmaengine fixes from Vinod Koul: "A bunch of driver fixes, notably: - idxd driver fixes for submission race, driver remove sequence, setup sequence for MSIXPERM, array index and updating descriptor vector - usb-dmac, pm reference leak fix - xilinx_dma, read-after-free fix - uniphier-xdmac fix for using atomic readl_poll_timeout_atomic() - of-dma, router_xlate to return - imx-dma, generic dma fix" * tag 'dmaengine-fix-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: dmaengine: imx-dma: configure the generic DMA type to make it work dmaengine: of-dma: router_xlate to return -EPROBE_DEFER if controller is not yet available dmaengine: stm32-dmamux: Fix PM usage counter unbalance in stm32 dmamux ops dmaengine: stm32-dma: Fix PM usage counter imbalance in stm32 dma ops dmaengine: uniphier-xdmac: Use readl_poll_timeout_atomic() in atomic state dmaengine: idxd: fix submission race window dmaengine: idxd: fix sequence for pci driver remove() and shutdown() dmaengine: idxd: fix desc->vector that isn't being updated dmaengine: idxd: fix setup sequence for MSIXPERM table dmaengine: idxd: fix array index when int_handles are being used dmaengine: usb-dmac: Fix PM reference leak in usb_dmac_probe() dmaengine: xilinx_dma: Fix read-after-free bug when terminating transfers
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Jason Gunthorpe: "Several small recent regressions - rather more than usual, but nothing too scary. Good to know people are testing. - Typo causing incorrect operation of the mlx5 mkey cache expiration - Revert a CM patch that is breaking some ULPs - Typo breaking SRQ in rxe - Revert a rxe patch breaking icrc calculation - Static checker warning about unbalanced locking in hns - Subtle cxgb4 regression from a recent atomic to refcount conversion" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/iw_cxgb4: Fix refcount underflow while destroying cqs. RDMA/hns: Fix the double unlock problem of poll_sem RDMA/rxe: Restore setting tot_len in the IPv4 header RDMA/rxe: Use the correct size of wqe when processing SRQ RDMA/cma: Revert INIT-INIT patch RDMA/mlx5: Delay emptying a cache entry when a new MR is added to it recently
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "A collection of small fixes: - A few regression fixes (PCM core fixes, USB-audio fixes) - Follow up fixes for the USB-audio mixer changes in this cycle - A long-standing ALSA sequencer race bug fix - Usual device-specific quirks for HD- and USB-audio" * tag 'sound-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: seq: Fix racy deletion of subscriber ALSA: memalloc: Fix regression with SNDRV_DMA_TYPE_CONTINUOUS ALSA: pcm - fix mmap capability check for the snd-dummy driver ALSA: usb-audio: Avoid unnecessary or invalid connector selection at resume ALSA: hda/realtek: add mic quirk for Acer SF314-42 ALSA: usb-audio: Add registration quirk for JBL Quantum 600 ALSA: hda/realtek: Fix headset mic for Acer SWIFT SF314-56 (ALC256) ALSA: usb-audio: Fix superfluous autosuspend recovery ALSA: usb-audio: fix incorrect clock source setting ALSA: scarlett2: Fix line out/speaker switching notifications ALSA: scarlett2: Correct channel mute status after mute button pressed ALSA: scarlett2: Fix Direct Monitor control name for 2i2 ALSA: scarlett2: Fix Mute/Dim/MSD Mode control names
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Regular weekly fixes pull, live from a Brisbane lockdown with kids at home. A big bunch of scattered amdgpu fixes, but they are all pretty small, minor i915 fixes, kmb, and one vmwgfx regression fixes, all pretty quiet for this time. amdgpu: - Fix potential out-of-bounds read when updating GPUVM mapping - Renoir powergating fix - Yellow Carp updates - 8K fix for navi1x - Beige Goby updates and new DIDs - Fix DMUB firmware version output - EDP fix - pmops config fix i915: - Call i915_globals_exit if pci_register_device fails - (follow on fix for section mismatch) - Correct SFC_DONE register offset kmb: - DMA fix - driver date/version macros vmwgfx: - Fix I/O memory access on 64-bit systems" * tag 'drm-fixes-2021-08-06' of git://anongit.freedesktop.org/drm/drm: drm/amdgpu: add DID for beige goby drm/amdgpu/display: fix DMUB firmware version info drm/amd/display: workaround for hard hang on HPD on native DP drm/amd/display: Fix resetting DCN3.1 HW when resuming from S4 drm/amd/display: Increase stutter watermark for dcn303 drm/amd/display: Fix Dynamic bpp issue with 8K30 with Navi 1X drm/amd/display: Assume LTTPR interop for DCN31+ drm/amdgpu: fix checking pmops when PM_SLEEP is not enabled drm/amd/pm: update yellow carp pmfw interface version drm/i915: fix i915_globals_exit() section mismatch error drm/i915: Call i915_globals_exit() if pci_register_device() fails drm/i915: Correct SFC_DONE register offset drm/vmwgfx: Fix a 64bit regression on svga3 drm/amdgpu: fix the doorbell missing when in CGPG issue for renoir. drm/amdgpu: Fix out-of-bounds read when update mapping drm/kmb: Define driver date and major/minor version drm/kmb: Enable LCD DMA for low TVDDCV
-
Theodore Ts'o authored
Commit b5776e75 ("ext4: fix potential htree index checksum corruption) removed a required restart when multiple levels of index nodes need to be split. Fix this to avoid directory htree corruptions when using the large_dir feature. Cc: stable@kernel.org # v5.11 Cc: Благодаренко Артём <artem.blagodarenko@gmail.com> Fixes: b5776e75 ("ext4: fix potential htree index checksum corruption) Reported-by: Denis <denis@voxelsoft.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-
Mathieu Desnoyers authored
State transitions from 1->0->1 and N->2->1 callbacks require RCU synchronization. Rather than performing the RCU synchronization every time the state change occurs, which is quite slow when many tracepoints are registered in batch, instead keep a snapshot of the RCU state on the most recent transitions which belong to a chain, and conditionally wait for a grace period on the last transition of the chain if one g.p. has not elapsed since the last snapshot. This applies to both RCU and SRCU. This brings the performance regression caused by commit 231264d6 ("Fix: tracepoint: static call function vs data state mismatch") back to what it was originally. Before this commit: # trace-cmd start -e all # time trace-cmd start -p nop real 0m10.593s user 0m0.017s sys 0m0.259s After this commit: # trace-cmd start -e all # time trace-cmd start -p nop real 0m0.878s user 0m0.000s sys 0m0.103s Link: https://lkml.kernel.org/r/20210805192954.30688-1-mathieu.desnoyers@efficios.com Link: https://lore.kernel.org/io-uring/4ebea8f0-58c9-e571-fd30-0ce4f6f09c70@samba.org/ Cc: stable@vger.kernel.org Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "Paul E. McKenney" <paulmck@kernel.org> Cc: Stefan Metzmacher <metze@samba.org> Fixes: 231264d6 ("Fix: tracepoint: static call function vs data state mismatch") Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Reviewed-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-
Hao Xu authored
There should be this judgement before we create an io-worker Fixes: 685fe7fe ("io-wq: eliminate the need for a manager thread") Signed-off-by: Hao Xu <haoxu@linux.alibaba.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Hao Xu authored
There is an acct->nr_worker visit without lock protection. Think about the case: two callers call io_wqe_wake_worker(), one is the original context and the other one is an io-worker(by calling io_wqe_enqueue(wqe, linked)), on two cpus paralelly, this may cause nr_worker to be larger than max_worker. Let's fix it by adding lock for it, and let's do nr_workers++ before create_io_worker. There may be a edge cause that the first caller fails to create an io-worker, but the second caller doesn't know it and then quit creating io-worker as well: say nr_worker = max_worker - 1 cpu 0 cpu 1 io_wqe_wake_worker() io_wqe_wake_worker() nr_worker < max_worker nr_worker++ create_io_worker() nr_worker == max_worker failed return return But the chance of this case is very slim. Fixes: 685fe7fe ("io-wq: eliminate the need for a manager thread") Signed-off-by: Hao Xu <haoxu@linux.alibaba.com> [axboe: fix unconditional create_io_worker() call] Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Kan Liang authored
A warning as below may be occasionally triggered in an ADL machine when these conditions occur: - Two perf record commands run one by one. Both record a PEBS event. - Both runs on small cores. - They have different adaptive PEBS configuration (PEBS_DATA_CFG). [ ] WARNING: CPU: 4 PID: 9874 at arch/x86/events/intel/ds.c:1743 setup_pebs_adaptive_sample_data+0x55e/0x5b0 [ ] RIP: 0010:setup_pebs_adaptive_sample_data+0x55e/0x5b0 [ ] Call Trace: [ ] <NMI> [ ] intel_pmu_drain_pebs_icl+0x48b/0x810 [ ] perf_event_nmi_handler+0x41/0x80 [ ] </NMI> [ ] __perf_event_task_sched_in+0x2c2/0x3a0 Different from the big core, the small core requires the ACK right before re-enabling counters in the NMI handler, otherwise a stale PEBS record may be dumped into the later NMI handler, which trigger the warning. Add a new mid_ack flag to track the case. Add all PMI handler bits in the struct x86_hybrid_pmu to track the bits for different types of PMUs. Apply mid ACK for the small cores on an Alder Lake machine. The existing hybrid() macro has a compile error when taking address of a bit-field variable. Add a new macro hybrid_bit() to get the bit-field value of a given PMU. Fixes: f83d2f91 ("perf/x86/intel: Add Alder Lake Hybrid support") Reported-by: Ammy Yi <ammy.yi@intel.com> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Andi Kleen <ak@linux.intel.com> Tested-by: Ammy Yi <ammy.yi@intel.com> Link: https://lkml.kernel.org/r/1627997128-57891-1-git-send-email-kan.liang@linux.intel.com
-
Dakshaja Uppalapati authored
Previous atomic increment/decrement logic expects the atomic count to be '0' after the final decrement. Replacing atomic count with refcount does not allow that, as refcount_dec() considers count of 1 as underflow and triggers a kernel splat. Fix the current refcount logic by using the usual pattern of decrementing the refcount and test if it is '0' on the final deref in c4iw_destroy_cq(). Use wait_for_completion() instead of wait_event(). Fixes: 7183451f ("RDMA/cxgb4: Use refcount_t instead of atomic_t for reference counting") Link: https://lore.kernel.org/r/1628167412-12114-1-git-send-email-dakshaja@chelsio.comSigned-off-by: Dakshaja Uppalapati <dakshaja@chelsio.com> Reviewed-by: Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Dave Airlie authored
Merge tag 'amd-drm-fixes-5.14-2021-08-05' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.14-2021-08-05: amdgpu: - Fix potential out-of-bounds read when updating GPUVM mapping - Renoir powergating fix - Yellow Carp updates - 8K fix for navi1x - Beige Goby updates and new DIDs - Fix DMUB firmware version output - EDP fix - pmops config fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210806011635.1055841-1-alexander.deucher@amd.com
-
Chengming Gui authored
Add device ids. Signed-off-by: Chengming Gui <Jack.Gui@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Shirish S authored
DMUB firmware info is printed before it gets initialized. Correct this order to ensure true value is conveyed. Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-